Used Scraper for sale (631)

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Iodpfxsxx Tigj Ahysbc Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Ibjdpetphubefx Ahyec

Condition: used, Year of construction: 2010, Technical details: Ibsdpfx Ahjzxww Ueyec • Edge material thickness for strip material: 0.4–6 mm • Edge material thickness for coil material (depending on material): 0.4–3 mm • Edge material height: max. 65 mm • Workpiece thickness: 6–60 mm • Minimum workpiece width: 65 mm • Minimum workpiece length: 160 mm • Feed speed: 10 m/min • Integrated control panel on the front side, in the infeed area • Control system: PPC 221 – Power PC • Pull-out workpiece support table, extension: 600 mm • 1801 Pre-milling unit with diamond milling cutter (1 × 0.8 kW, 1 × 1.2 kW, 200 Hz, 12,000 rpm) • 1903 Edge band magazine, pre-cutting up to 3 mm • 1906 MG combined glue application unit (cartridge and granulate) • Pressure regulator for cartridge glue application with pneumatic control • 1912-3 Pressure roller unit • 1918 Pneumatic end-trimming unit • 1827 Multifunctional milling unit (pneumatic control) • 1832 Corner rounding/milling unit • 1929 Scraper unit, R = 2 mm • 1964 Flat scraper Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: excellent (used), functionality: fully functional, 3000L paddle mixer with column loading system | Double-shaft mixer for meat and fillings Type: Double-shaft paddle mixer Bowl capacity: 3000 liters Mixing system: Double paddle shaft Discharge system: Pneumatically/hydraulically operated bottom/front flap Loading system: Integrated column lift Ijdpjz Rq Hrjfx Ahysbc This 3000-liter double-shaft paddle mixer is a highly efficient machine designed for continuous industrial operation. It is suitable for use in large meat processing plants, butcher shops, delicatessen facilities, ready-to-eat food factories, and in the pet food and vegetable processing industries. It is designed for mixing, standardizing, and gently kneading various types of meat fillings, finely and coarsely ground sausages, salads, dumpling fillings, or vegetable mixtures. The core of the machine is a double paddle shaft system with specially shaped scrapers, which ensure fast, uniform, and thorough mixing of the entire batch without damaging the raw material's structure. The counter-rotating motion of the paddles eliminates dead zones in the bowl, allowing for optimal distribution of spices, brines, and functional additives. The integrated column lift enables the automation of the loading process. The machine features a robust construction that prevents vibrations during operation with heavy loads. The appropriately shaped bottom of the chamber, combined with the pneumatically operated discharge flap, allows for quick and hygienic discharge of the finished product directly into a buffer, unloader, or onto a conveyor belt.

Condition: used, - 3-roll system Ibedjz Ini Dopfx Ahyec - mobile - technically sound - easily removable covers and scrapers for cleaning - machine weight 1700 kg - hourly capacity 2000 kg per hour - adjustable roll thickness - external control panel not included

Condition: ready for operation (used), Year of construction: 2005, Glue pot Edge application End-cutting units Flush trimming units Radius trimming units Scrapers Buffing units Isdpfsz Egkbox Ahysbc This machine is a compact edgebander for straight workpieces, featuring application rollers for hot-melt adhesive on the workpiece edges. The end-cutting unit—which uses a single saw blade to cut both the leading and trailing edges—and the roll cut-off mechanism are controlled electro-pneumatically. The high-frequency (HF) motors for the end-cutting, trimming, and corner-rounding units are powered by an electronic frequency converter. The pressure required to bond the edge material to the workpiece is generated by spring-loaded rollers in the machine table. TECHNICAL DATA Motor power: 2 x 2.2 kW Frequency: 200 Hz Speed: approx. 12,000 rpm Motor shaft: 30 mm diameter, 58 mm length, internal M16 (left-hand thread), internal M12 (right-hand thread) Max. tool dimensions: 100 x 48 mm Max. milling depth: 3 mm Extraction: 60 mm diameter Solid edge strip thickness: 5 mm Coil edge strip thickness: 2 mm Tool height: 40 mm Tool length: 200 mm Feed speed: approx. 10 m/min MACHINE DIMENSIONS Length including outrigger: 3,540 mm Depth including roller table: 1,325 mm Height: 1,520 mm Work table height: 880 mm Work table width with support rail retracted: 210 mm Work table width with support rail extended: 680 mm Weight: 880 kg

Condition: excellent (used), Year of construction: 2004, operating hours: 29,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: Haidenhain iTNC 530, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 16,000 h, number of slots in tool magazine: 92, Equipment: chip conveyor, documentation/manual, 5-axis machining center Travel ranges: x = 750 mm, y = 600 mm, z = 520 mm Spindle speed range: 20 – 18,000 rpm Tool holders: HSK63 Laser tool measurement system integrated in the machine High-pressure internal cooling through the spindle center, 40 bar Tool magazine with 92 positions Year of manufacture: 2004 General overhaul: 2021 The following was done during the overhaul: Hydraulic lines replaced Linear guides and ball screws in the x, y, and z axes replaced, including bearings and timing belts Scrapers and bellows replaced Most recently (2026): Iodpfx Aozz Ahqohyobc Z-axis servo motor repaired Hydraulic unit for lubrication replaced AC servo controller for the x-axis replaced The machine is equipped with a 3D probe and a band filter.

Condition: good (used), Year of construction: 2011, machine/vehicle number: AH005553, functionality: fully functional, total length: 8,100 mm, overall weight: 4,000 kg, Main specifications: * Panel thickness: max. 60 mm Ijdjzvb Uxjpfx Ahyobc * Edge thickness: 0.4 - 3 mm (Solid wood up to 12 mm) * Feed speed: up to 25 m/min * Glue system: EVA / PUR Configuration: * Pre-milling unit * Gluing unit with pressure rollers * End-trimming unit * Top/Bottom trimming unit (rough & fine) * Corner rounding unit * Radius edge scraper * Glue scraper * Buffing unit Machine Condition: * Excellent working condition. * Regularly maintained. * Available for inspection and testing while powered on.

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor Iodpephvl Tefx Ahyjbc - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Year of construction: 2024, condition: like new (used), functionality: fully functional, Cream cooker "Creamco" with 80 litre bowl, demonstration model (year of manufacture 2024) with warranty, almost as good as new, only used for demonstration purposes, for puddings, batters, creams, fillings, cooked and boiled items and much more, with multi-walled stainless steel container, easy (tool-free) removal of stirring tool including plastic scrapers, digital thermostat and timer. Mobile machine, made entirely of stainless steel, with triple wall for optimum heat insulation and even heat distribution, including side and bottom scrapers. Includes removable lid with separately closable filling opening. Also perfect for making or preparing sensitive products such as choux pastry, baking cream, chocolate, fondant, fruit jam, coatings, fillings, and similar products that require even heating and mixing/stirring. There are 2 stirring speeds to choose from, as well as stirring without heating, e.g. for pre-mixing ingredients or cooling. Manual or automatic operation via digital thermostat and timer. The kettle can be easily tilted using a crank handle to remove the product, even by more than 90 degrees, making cleaning relatively easy. Ijdpfxoyugb Nj Ahyebc AVAILABLE NOW! Technical data: Capacity: 80 litres, maximum filling quantity approx. 50 litres, recommended minimum filling quantity: approx. 7 - 10 litres, max. temperature: 150°C, thermal oil volume: 19.5 litres, heating power: 9 kW, agitator motor power: 0.6 kW / 0.8 kW (1st / 2nd speed), connection values: 400 V - 3Ph - 50Hz, approx. 10 kW, 32A CEE plug Dimensions: approx. 96 x 74 x 165 cm (W x D x H), filling height: approx. 127 cm, weight: approx. 160 kg

Year of construction: 2006, condition: used, Manufacturer: Terlet Model: stirring kettle Year: 2006 Condition: Used Serial number: 0511170-001-001/002 Stock number: 3423 Capacity: 2 x 1000 liters Heating: thermal oil Infeed height: 1950 mm Outfeed height: 1050 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 8.6kW (2x) Dimensions: 2900 x 5700 x 2600 mm Ibjdpfx Ahoz E R Hgoyoc Weight: 2 x 1500 kg 2x tilting stirring kettles with scraper agitator. Includes Endress + Hauser Promag P flowmeter. Includes Carnitech L25-1-4209 mobile lift for standard containers, year 2006.

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: AB00040876, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 550 kg, Equipment: CE marking, documentation/manual, Automatic edge banding machine SCM ME 40TR in CE version, manufactured in 2026. Equipped with a glue pot and features compliant with European directives, including a rectifying unit and a special rounding saw unit. Features include: a saw unit with an automatic on/off system, a scraper with an automatic on/off system, a brushing unit, a glue scraping unit with an automatic on/off system, an automatic strip feed system with a magazine, a glue pot for polyurethane adhesive with rapid discharge, an infrared lamp, an anti-stick unit, a spraying system for finishing the edge band, a “Nesting” copy unit for the routing unit and for the edge band scraper, and internal lighting. The optional edge band scraping unit is designed for processing edge bands thicker than 1 mm. Ibedpoz Nlmqjfx Ahyoc

Condition: excellent (used), Year of construction: 2004, Control system: Heidenhain iTNC530 X-axis: 1,050 mm Y-axis: 800 mm Z-axis: 560 mm C-axis: 360° B-axis: 10°/+110° Spindle speed: max. 18,000 min⁻¹ Drive power: 35 kW Max. torque: 80 Nm Tool interface: HSK-A63 Feed rate (X / Y / Z): max. 90,000 mm/min Rated power: 80 kVA Rated current: 115 A Voltage: 400 V Frequency: 50 Hz Coolant tank with 1000 liters Tool changer with 32 positions with internal cooling at 40 bar (IKZ) with chip conveyor, scraper belt Weight: 12,200 kg Transport dimensions: 4,100 x 2,900 x 3,500 mm Ijdjz N A Nvspfx Ahyjbc Machine available at the current location without disassembly. Disassembly must be arranged by the buyer. The machine is being sold on behalf of the customer.

Condition: used, Year of construction: 2017, operating hours: 3,500 h, Equipment: Base package AK635 Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 25,000 kg Hydraulically adjustable support leg Splash guards (inner and side fenders) Mercedes-Benz diesel engine OM502LA, 440 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Load-dependent feed control including automatic scraper floor reversal Separate drives for feed roller and scraper floor (twin drive) Fuel tank 750 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip “Streusel” Additional hydraulic connection 20 l/min Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is off 24 V electrical control Separate control box at the rear of the machine Ibjdpfx Ahsy D Nktsyoc Hydraulically folding fine shredding basket with flap (mesh size from 30 - 280 mm, gradation on request) Rear conveyor: belt length 6,150 mm, belt width 1,500 mm, discharge height 4,500 mm, hydraulically foldable, with anti-magnetic centre section Lower conveyor: belt length 1,700 mm, belt width 1,400 mm Scraper floor with 34 slats Radio remote control incl. transmitter, receiver, 230 V charging station, 12/24 V charging cable, transmitter bracket. The following functions can be controlled: engine stop, engine speed +/-, material feed: on/off/reverse, fine shredding basket: open, rear/lower conveyor: on/off, feed roller: reverse, scraper floor stop/reverse/forward, support leg: raise/lower, drive preparation: stop/reverse/forward/release Drive preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Fine shredding basket 60 mm Optional equipment: Impact plate with impact bar Overband magnet -Neodymium- Frame for overband magnet Smooth feed roller Scraper floor with cleaning holes Delivery date to be agreed

Condition: used, Year of construction: 2014, functionality: fully functional, Travel ranges Travel distance X-axis [mm] 760 Travel distance Y-axis [mm] 530 Travel distance Z-axis [mm] 560 Distance from spindle bottom edge to table [mm] 150-710 Work table Table length [mm] 900 Table width [mm] 500 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 500 Feed Rapid traverse X- and Y-axis [m/min] 40 Rapid traverse Z-axis [m/min] 36 Max. axis acceleration X-axis [m/sec²] 6 Max. axis acceleration Y-axis [m/sec²] 5 Max. axis acceleration Z-axis [m/sec²] 5 Max. feed force X-axis [kN] 6.951 Max. feed force Y-axis [kN] 6.951 Max. feed force Z-axis [kN] 11.31 Diameter of ball screw X- and Y-axis [mm] 45 Diameter of ball screw Z-axis [mm] 45 Main spindle Main spindle speed min. [1/min] 30 Main spindle speed max. [1/min] 12,000 Main spindle power [S6-40% duty cycle kW] [kW] 25 Main spindle torque max. [Nm] 159 Tool holder SK 40 DIN 69871 A Tool magazine Number of tool magazine positions 30 Tool change time chip-to-chip [sec] 4 Max. tool diameter [mm] 76 Max. tool diameter with adjacent space available [mm] 125 Max. tool length [mm] 280 Max. tool weight [kg] 7 Coolant system Coolant tank volume [l] 300 Through-spindle cooling pressure [bar] 3.5 Through-spindle cooling [l/min] 60 Internal coolant supply pressure [bar] 20 Internal coolant supply [l/min] 25 Chip flushing pressure [bar] 3.5 Chip flushing [l/min] 60 Coolant spray gun yes External compressed air supply yes Separate oil cooler for main spindle yes Oil cooling circuit [l] 100 Separate air supply for main motor yes Basic machine data Installation area width [mm] 2,540 Installation area depth [mm] 2,600 Machine height [mm] 2,930 Weight of basic machine [kg] 6,400 Electrical connection power [kVA] 25 Required pneumatic connection [bar] 6 Required compressed air [l/min] 300 Control system Manufacturer Heidenhain Control system type iTNC 530 HSCI with SmarT.NC Ibedpoz Dttgjfx Ahyjc Chip disposal Internal screw conveyor 2 Scraper belt conveyor to the outside 1

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement Ijdpfxsz Ipl Hj Ahyobc • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Year of construction: 2017, operating hours: 600 h, condition: ready for operation (used), functionality: fully functional, ROBOQBO QBO15-4 - Universal Cooking, Cutting & Mixing System - Fully Refurbished The Roboqbo QBO15-4 is a compact all-in-one food processing system designed for manufacturers, R&D facilities and food laboratories requiring maximum flexibility and precise process control from a single machine. With a 15-litre processing vessel, QBO15-4 combines cutting, mixing, cooking, heating, cooling and vacuum processing in one integrated system. Multiple production stages can therefore be performed without transferring the product between separate machines. The system provides precise control of temperature, vacuum, pressure and variable blade speed, making it particularly suitable for recipe development, product testing, specialized production and small batches. Ibsdez Ellqopfx Ahysc FULLY REFURBISHED & UPGRADED The machine was manufactured in November 2017, has been completely refurbished and is equipped with a latest-generation PLC installed in 2025. The machine has only approximately 6 months of actual use and is fully functional and ready for operation. MAIN FEATURES 15-litre processing capacity AISI 316L stainless-steel construction Variable blade speed: 30-3,000 rpm Maximum processing temperature: 120°C Maximum vacuum: -980 mbar Cutting, mixing and cooking functions Controlled heating and cooling Vacuum and pressure management Automatic bowl, lid and locking movements Internal steam generator Steam pressure control and regulator Double cooling system* Temperature detection and control Micro-serrated blade with locking system Electric bowl tilting for product discharge Pneumatic extrusion opening for product discharge Overpressure system for liquid and semi-liquid products Motorized scraper on removable lid Ingredient hopper with manual valve Inspection window with LED light Condensate recovery system Washing system with 3 programs Acoustic alarms and end-of-cycle notification CONTROL & CONNECTIVITY The QBO15-4 features a touchscreen control panel with integrated operating system and Roboqbo software. Connectivity includes USB, Ethernet and WiFi, together with data updating and printing functionality. TECHNICAL DATA Manufacturer: Roboqbo Model: QBO15-4 Year: November 2017 Condition: Completely refurbished PLC: Upgraded in 2025 Actual use: Approx. 6 months Capacity: 15 litres Material: AISI 316L stainless steel Blade speed: 30-3,000 rpm Max. temperature: 120°C Max. vacuum: -980 mbar Power supply: 400 / 220 / 200 V - 50/60 Hz Motor power: 6-18 kW Dimensions: 1,240 x 997 x 1,381 mm Net weight: 263 kg incl. generator The QBO15-4 brings multiple food-processing operations together in one compact system, helping manufacturers simplify production workflows, reduce product transfers and develop new recipes with precise and repeatable process parameters. Fully functional and available for inspection under working conditions. *Double cooling system included; related accessories are optional. Water and compressed air must be supplied separately.

Condition: used, functionality: fully functional, total width: 1,009 mm, total length: 902 mm, total height: 678 mm, empty load weight: 165 kg, input voltage: 380 V, Range: Trégor Tradition Dough weight range: 50 to 1,450 g Capacity: up to 1,800 pieces/hour Baguette capacity: 1,500 pieces/hour Rollers: 1 pre-rolling + 2 rolling Pointed end shaping: Pointop system Settings: 2 selectors with 36-position pins Belts: woven wool on synthetic warp Belt thickness: 7 mm Sides: 12 mm food-grade aluminum Fold-down safety chute Removable scrapers with snap-off mechanism Removal of both belts: approx. 25 min Power: 0.55 kW Power supply: 380 V Frequency: 50/60 Hz Ibjdpfxjz Ehwce Ahyoc Current: 1.75 A at 380 V Dimensions: 1009 x 902 x 678 mm Weight: 165 kg Used MERAND Trégor Tradition dough shaper – 50 to 1,450 g General description This used MERAND Trégor Tradition dough shaper, from the previous Mécapâte generation, is designed for rolling, wrapping, and elongating dough in professional bakeries. Its vertical design allows for processing a documented range of 50 to 1,450 g, with a capacity of up to 1,800 pieces/hour depending on the weight and type of dough. The shaping process uses three rollers, including one Alvéo+ pre-rolling roller and two rolling rollers. The dough is then elongated between two belts moving in opposite directions. This configuration is particularly suitable for preparing baguettes, short loaves, half-baguettes, and various other bakery products as intended by the manufacturer. Why this Trégor Tradition stands out This version combines three characteristic features of the Trégor Tradition: PPR, the Alvéo+ roller, and the Pointop system. The Progressive and Adjustable Pre-rolling assists in adjusting the rolling process to gradually work the dough. The Alvéo+ roller, with its alveolar structure, is designed to limit degassing and better preserve the structure of fermented or hydrated doughs. The Pointop, for its part, enables the automatic shaping of breads and baguettes with pointed ends. Two selectors with 36-position pins allow for precise adjustment of the rolling and elongation, which is an advantage for achieving consistent settings between different products.

Condition: used, functionality: fully functional, total width: 966 mm, total length: 1,184 mm, total height: 1,322 mm, empty load weight: 200 kg, input voltage: 380 V, Vertical forming machine Dough weight range: 50 to 1,200 g Maximum output: 1,200 pieces/hour 3 PETP rolling rollers Rolling adjustment via a lever Elongation adjustment via a lever Side controls on the right-hand side Lucoflex scraper blade Wool or synthetic elongation belt Quick belt change Emergency stop Mobile base with casters Power: 0.75 kW Dimensions: 966 x 1184 x 714/1322 h Weight: 200 kg Used JAC UNIC forming machine – 50 to 1200 g Ibedpfx Ahoz Eh Afsyjc A vertical forming machine for dough processing The JAC UNIC is a vertical forming machine designed for professional bakers to laminate and elongate dough pieces. This configuration allows the various forming steps to be combined in a compact machine, suitable for the organization of a professional bakery. The documentation for the UNIC range indicates a working range of 50 to 1,200 g. The machine uses 3 food-grade PETP rolling rollers to gradually prepare the dough before it passes through the elongation zone. This principle is particularly suitable for forming baguettes, long loaves, and various bread formats. Why this JAC UNIC stands out The main advantage of this forming machine lies in its vertical architecture and the separation of the rolling and elongation adjustments. The large side levers allow the operator to mechanically adjust the dough processing to suit the desired product. In the model presented, the controls are located on the right-hand side. The machine also has a front chute and rests on a mobile base equipped with casters. This arrangement facilitates its positioning in the bakery while maintaining direct access to the adjustments.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Traub CNC turning machine TNA480, TX8D, year of manufacture 1990, serial number 607. Servo C-axis, reinforced rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, 3-jaw chuck KNCS315, ID090090. Main drive with 2 gear stages. A8 spindle with hollow clamping cylinder Röhm SZS 86/169, ID 416530. Additional accessories, tool holders, chucks available upon request. Includes ATC optics, spare parts catalog, wiring diagram, tool holder catalog. Very good condition, operational, can be inspected while running. Machine geometry has been checked and corrected/adjusted, and a test run has been performed. Scraper + belt + drive sprocket, belt checked and replaced, maintenance performed at 4000 hours. Technically very good condition, guideways, spindle bearings in very good condition. Videos available upon request. Ibodpfx Ahez Eqh Deyec

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: AH/115881, functionality: fully functional, overall weight: 2,364 kg, Equipment: documentation/manual, Element thickness: 60 mm Edge thickness: 8 mm Feed speed: 18 m/min Soundproof cabin: Yes Glue tank: Yes Touchscreen control (10 inches) Height adjusted manually from the control panel Ibjdoytkczspfx Ahyoc 4-axis milling machine, manually operated from the panel Cross cutting Two wrapping units, profile scraper

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, total height: 1,400 mm, total length: 4,000 mm, total width: 1,200 mm, OTT ATLANTIC EDGE BANDER 2 HM SAW BLADES 140X3.2X16 Z=36 FLUSH MILLING WITH 2 HM REVERSIBLE KNIFE CUTTER HEADS FINE MILLING WITH 2 HM REVERSIBLE KNIFE CUTTER HEADS Iedpfx Asww H Enehyjbc SCRAPING UNIT WITH 2X HM SCRAPERS, AUTOMATIC FEED EDGE CLEANING – OSCILLATING BRUSHES MACHINE LENGTH: 4.50 M

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Traub CNC lathe TNS60, TX8D, year of manufacture 1990, serial no. 1403 C-axis, rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, through-hole chuck cylinder, collet chuck 185E, AMK drive. Very good condition, fully functional. Machine geometry has been checked and corrected/adjusted. The machine was completely overhauled in 2019 and has had few operating hours since then; guide rails, spindle bearing, and ball screws are in top condition. Ibedpfx Ahez Eqmteyec Scrapers and belts have been checked and replaced. The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 980 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 8,000 rpm, spindle nose: ISO 50, number of spindles: 240, CNC MSX 701 III Travels (X/Y/Z axes): 900 / 800 / 980 mm Pallet working surface: 630 x 630 mm Pallet load capacity: 1,200 kg Iedpeykpg Hsfx Ahyjbc High-torque spindle max speed: 8,000 rpm Rapid traverse rate (X, Y, Z): 50 m/min Tool magazine capacity: 240 tools Spindle motor power (30 min / continuous): 37 / 30 kW Machine Configuration: 240-position RACK tool magazine Spindle taper DIN 69871 – ISO 50 Tool breakage detection in magazine Index table with 1° indexing FASTEMS interface, model MLS-MD Spindle speed 8,000 rpm – 37/30 kW TOOL IC SYSTEM BALLUFF interface No. 600 macro variables No. 1 load monitor No. 200 storable programs No. 512 tool life management No. 999 tool offsets No. 48 workpiece coordinate systems Data server + ATA card Mori Seiki scraper-type chip conveyor with drum filter MARPOSS application, model MIDA T25G, with E86N radio transmission system META pumping unit, model M 50/50, partial filtration system, 50 bar high pressure COMET drilled pallet Instruction manuals and CE Declaration of Conformity

Condition: used, Pastochef Range Electrical power Power supply 400 V / 50 Hz / 3 phases Rated power 2 kW Fuse 10 A Crème Excellent: 6 to 15 kg per cycle Bavarian cream: 7 to 17 kg per cycle Fruit jam: 6 to 12 kg per cycle Chocolate tempering: 5 to 15 kg per cycle Ganache cream: 3 to 15 kg per cycle Choux pastry: 6 to 15 kg per cycle 46 dedicated programs and 5 free programs Dry bain-marie for heating and cooling Variable speed via inverter Display guiding through steps and temperatures Removable paddle and agitator scrapers Double lid with large hopper 3-position tap with double safety 4-position stainless steel shelf Ibedpezx Un Rjfx Ahysc Management of power and water outages Rounded safety corners Cleaning by heating the cylinder Drying program after washing Dimensions 450 × 614 × 1110 mm Net weight 150 kg Air condenser available at extra cost Multifunction cooking machine Pastochef 18 RTL-I – up to 17 kg per cycle General description The Pastochef 18 RTL-I is a professional, multifunction cooking machine designed to automate numerous preparations in pastry, chocolate, ice cream, and gastronomy. It combines cooking, cooling, mixing, pasteurization, and preservation according to the selected programs. Each cycle guides the operator through the various steps, displaying temperatures and providing instructions for the gradual introduction of ingredients. Its capacity depends directly on the recipe being used, for example, 6 to 15 kg of Crème Excellent and up to 17 kg of Bavarian cream per cycle. What sets this model apart The Pastochef 18 RTL-I uses a dry bain-marie heating and cooling system, developed to limit the formation of deposits on the cylinder surfaces and maintain a consistent heat exchange. The inverter allows the stirring speed to be adapted to the preparation. The scrapers and removable paddle generate a vertical and horizontal helical movement to promote thorough mixing during the process. The machine has 18 pastry programs, 9 chocolate programs, 8 specialty programs, 7 gastronomy programs, 4 ice cream programs, and 5 free programs for recording custom cycles.