Used Scraper for sale (633)

Condition: used, Year of construction: 1999, functionality: fully functional, overall weight: 12,000 kg, power: 5.5 kW (7.48 HP), input voltage: 400 V, empty load weight: 5,200 kg, DGUV certified until: 02/2027, We are offering this used Husmann SPB 20 FKL press container, manufactured in 1999, for sale. Type: SPB 20 FKL Machine No.: 18590 Volume: 20.0 m3 Power: 5.5 kW Unladen weight: 5200 kg Permissible total weight: 12000 kg Voltage: 400 V Year of manufacture: 1999 Last maintenance (UVV & DGUV): 02/2026 Two-part lid for ramp access Steel scraper Fully functional Blodszg Ha Iepfx Amren If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2009, operating hours: 61,894 h, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed length X-axis: 2,340 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, nominal power (apparent): 25 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,250 mm, total length: 6,200 mm, total width: 3,700 mm, table width: 750 mm, table height: 930 mm, table length: 1,400 mm, rotary table diameter: 800 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 12,000 rpm, overall weight: 16,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 330 mm, tool diameter: 80 mm, tool weight: 15,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We offer this used Hedelius RS 80-K-2300 5-axis machining center, manufactured in 2009. Bledpfx Amjz Hx Ihsrjn Key Data Manufacturer HEDELIUS GmbH Type RS 80-K-2300 Year of Manufacture 2009 Power Requirement / Voltage 29 kW / 400 V / 50 Hz (25 kVA) Total Weight 16000 kg Footprint Length 6.20 m Width 3.70 m Height 3.25 m Control System Program Input HEIDENHAIN Controller iTNC 530 NC Software Version 340490 04 SP4 PLC Software Version RS80_K V1.54 Development Level L4 Operating Hours Control System On 63333 Machine On 61894 Program Run Time 28295 Travel Ranges (Total Working Area) X-Axis 2340 Y-Axis 800 Z-Axis 600 Right Working Area (Fixed Machine Table Area) X-Axis 945 Y-Axis 800 Z-Axis 600 Left Working Area (Rotary/Swivel Table Area) (simultaneous machining possible) X-Axis 800 Y-Axis 800 Z-Axis 600 A-Axis +10° / -90° C-Axis 0 - 360° Clamping Surface - Fixed Machine Table Length 1400 Width 750 Clamping Surface - Rotary/Swivel Table Length Ø 800 Width 630 Work Table T-Slots DIN 650 Slot Width 18 / 18 mm Slot Pitch 125 / 125 mm Number 5 / 5 Table Height Fixed Machine Table 930 mm Celox Motor Spindle Manufacturer Kessler Type DMS 100.XL-633.607 Speed Range 50 – 12000 rpm Tool Shank SK 40 Tool Magazine Magazine Capacity 30 tools Max. Tool Diameter Ø 80 mm (with available free slots) Ø 125 mm Max. Tool Length 330 mm Max. Individual Tool Weight 15 kg Total Magazine Weight 450 kg Special Accessories Scraper Conveyor AME GmbH Total Length ≈ 5700 Height ≈ 1760 Depth ≈ 830 Weight 515 kg Band Filter System (High-Pressure Coolant System) Model PS 120 Tank Capacity 780 l Flow Rate 120 l/min Filter Fleece 670 mm 100 m on a roll Length ≈ 2320 Height ≈ 1060 Depth ≈ 850 Weight 515 kg Motor Spindle - Cooling Unit Manufacturer Hyfra GmbH Type Chilly-25-S Machine No. 09010098 Year of Manufacture 2009 Weight 65 kg Control Cabinet - Cooling Unit Manufacturer Pfannenberg Type DTS 7101 SC Model No. 08390173726 Laser Light Barrier Manufacturer BLUM Type P87.0634 Laser System MINI – MICRO - NANO Wireless Measuring Probe Manufacturer HEXAGON Model m&h Radio-wave Touch Probe Type RWP20.50-M Extra KinematicsOpt HEDELIUS Transformation Kit If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 41 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, total length: 12,000 mm, total width: 3,000 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We offer this used HOMAG KAL370 AMBITION 2474 edgebander with material handling system, year of construction 2017. Type: KAL370 AMBITION 2474 Machine number: 0-200-04-6745 Year of manufacture: 2017 year Technical data and configuration: - edgebanded meters: 1 143 000 m - sizes: the edgebander is 8,4x1,2 m, together 12x3 m - touch screen monitor with Power Touch control, Dell PC - USV unit - infeed speed: 16-25 m/min, with corner rounding unit maximum 20 m/min - automatic thickness adjustment between 8-60 mm - top pressure system with rubber belt (the belt changed in the beginning of 2025.) - separating/lubricating spray units: at front side, at the pressure rollers, before sawing unit, before glue scraper unit - additional infeed table for narrow workpiece infeed - premilling unit, manually adjustable - workpiece preheating unit (completely renovated in 2026.) - QA65 glue pot with manually adjustable glue gates - the machine is used now with EVA hotmelt glue - Robatech glue premelting unit for PUR glue - automatically adjustable edge pressure zone, edge thickness: 0-3 mm - edge magazine with one edge capacity, edge infeed with servo drive motor - edge material height adjustment manually - PK25 snipping saws with 3 functions - rough trimming unit - FK11 trimming/ corner rounding unit with R2 diamond tool and automatic adjustment - MN 21multi profile scraping unit with automatic adjustment (fase-R1-R1,5-R2- R2,5-R3) - glue scraping unit FA20 with automatic adjustment - buffing unit - remote control for setup mode - the machine is for sell together with Homag TFU material handling system - liftable air cushion table for TFU at the infeed area Bljdpfoz E S E Rox Amron - front side Interroll band motor has changed for TFU in the beginning of 2026. - Including: full documentation and CE certificate, HDD for PC1:1 data save, suction pipes above the machine, tools for tool change The machine is in good condition, regularly maintained and it is still in production. Available immediately. If you have any questions or need more information, feel free to send us a message or give us a call: +36202546770

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 202.03.008.17, functionality: fully functional, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 12 m/min, total height: 1,693 mm, total length: 4,620 mm, total width: 1,200 mm, Equipment: CE marking, documentation/manual, FORMAT4 Tempora F800 60.08 e-motion Edgebander Manufacturer: FORMAT4 / Felder Group Model: Tempora F800 60.08 e-motion Year of manufacture: 2017 Serial number: 202.03.008.17 Location: Slovenia Well-maintained FORMAT4 Tempora F800 60.08 e-motion edgebander in very good technical condition. The machine has processed approximately 63,000 linear meters. It is fully operational, regularly maintained, and ready for production. Bsdpoztbutjfx Amrsln The machine is currently connected and can be inspected and tested while powered on. Technical data: - Feed speed: 12 m/min - Workpiece thickness: up to 60 mm - Coiled ABS/PVC edge thickness: 0.4–3.0 mm - Strip edge material: up to 8 mm - Electrical connection: 400 V / 50 Hz / 3-phase - Rated power: 11 kW - Rated current: 28 A - Required compressed air pressure: 7 bar Overall dimensions: - Length: approx. 4,620 mm - Machine width without extended front support: approx. 1,200 mm - Height with safety hood closed: approx. 1,693 mm - Required operating depth with front support extended: approx. 1,775 mm - Height with safety hood open: approx. 2,068 mm Equipment: - Pneumatic-mechanical workpiece stop at the infeed - Premilling unit with replaceable cutters - Premilling working height up to 64 mm - Infrared heating lamp - EVA glue pot - Reversing function of the glue roller - e-motion end-trimming unit with two motors - Pneumatically tilting end-trimming saws, adjustable from 0° to 15° - Tandem copying unit - Rondomat corner-rounding unit for edge thicknesses from 0.4 to 3 mm - Motorized positioning of the Rondomat unit - Radius scraper unit with pneumatic activation - Flat scraper unit for nesting applications - Release agent spray unit - Sliding agent spray unit - LED interior working lights The machine is being sold due to investment in a newer edgebander. Availability is by agreement. Dismantling, loading, and transport are at the buyer's expense unless otherwise agreed. Please contact me through Machineseeker for further information, additional photos, a video demonstration, or to arrange an inspection.

Year of construction: 1994, condition: used, Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: OTT, profile scraper from edge banding machine type U206 Bsdpfx Aeu Drugsmrjln -Quantity: 1 piece available -Dimensions: 460/430/H560 mm -Weight: 57 kg

Condition: used, functionality: fully functional, total width: 1,009 mm, total length: 902 mm, total height: 678 mm, empty load weight: 165 kg, input voltage: 380 V, Range: Trégor Tradition Dough weight range: 50 to 1,450 g Capacity: up to 1,800 pieces/hour Baguette capacity: 1,500 pieces/hour Rollers: 1 pre-rolling + 2 rolling Pointed end shaping: Pointop system Settings: 2 selectors with 36-position pins Belts: woven wool on synthetic warp Belt thickness: 7 mm Sides: 12 mm food-grade aluminum Fold-down safety chute Bedpfxez Ehwco Amrjln Removable scrapers with snap-off mechanism Removal of both belts: approx. 25 min Power: 0.55 kW Power supply: 380 V Frequency: 50/60 Hz Current: 1.75 A at 380 V Dimensions: 1009 x 902 x 678 mm Weight: 165 kg Used MERAND Trégor Tradition dough shaper – 50 to 1,450 g General description This used MERAND Trégor Tradition dough shaper, from the previous Mécapâte generation, is designed for rolling, wrapping, and elongating dough in professional bakeries. Its vertical design allows for processing a documented range of 50 to 1,450 g, with a capacity of up to 1,800 pieces/hour depending on the weight and type of dough. The shaping process uses three rollers, including one Alvéo+ pre-rolling roller and two rolling rollers. The dough is then elongated between two belts moving in opposite directions. This configuration is particularly suitable for preparing baguettes, short loaves, half-baguettes, and various other bakery products as intended by the manufacturer. Why this Trégor Tradition stands out This version combines three characteristic features of the Trégor Tradition: PPR, the Alvéo+ roller, and the Pointop system. The Progressive and Adjustable Pre-rolling assists in adjusting the rolling process to gradually work the dough. The Alvéo+ roller, with its alveolar structure, is designed to limit degassing and better preserve the structure of fermented or hydrated doughs. The Pointop, for its part, enables the automatic shaping of breads and baguettes with pointed ends. Two selectors with 36-position pins allow for precise adjustment of the rolling and elongation, which is an advantage for achieving consistent settings between different products.

Condition: used, functionality: fully functional, total width: 966 mm, total length: 1,184 mm, total height: 1,322 mm, empty load weight: 200 kg, input voltage: 380 V, Vertical forming machine Dough weight range: 50 to 1,200 g Maximum output: 1,200 pieces/hour 3 PETP rolling rollers Bsdpfx Aez Eh Afemrjln Rolling adjustment via a lever Elongation adjustment via a lever Side controls on the right-hand side Lucoflex scraper blade Wool or synthetic elongation belt Quick belt change Emergency stop Mobile base with casters Power: 0.75 kW Dimensions: 966 x 1184 x 714/1322 h Weight: 200 kg Used JAC UNIC forming machine – 50 to 1200 g A vertical forming machine for dough processing The JAC UNIC is a vertical forming machine designed for professional bakers to laminate and elongate dough pieces. This configuration allows the various forming steps to be combined in a compact machine, suitable for the organization of a professional bakery. The documentation for the UNIC range indicates a working range of 50 to 1,200 g. The machine uses 3 food-grade PETP rolling rollers to gradually prepare the dough before it passes through the elongation zone. This principle is particularly suitable for forming baguettes, long loaves, and various bread formats. Why this JAC UNIC stands out The main advantage of this forming machine lies in its vertical architecture and the separation of the rolling and elongation adjustments. The large side levers allow the operator to mechanically adjust the dough processing to suit the desired product. In the model presented, the controls are located on the right-hand side. The machine also has a front chute and rests on a mobile base equipped with casters. This arrangement facilitates its positioning in the bakery while maintaining direct access to the adjustments.

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Bedpfx Ametphubsrsln

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026 Bodpozpzy Uofx Amroln

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you: CNC machining center, universal, with pallet automation Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: Machine 2023 / Automation 2025 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4020 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Scraper-type chip conveyor with cleaned filter screen - Internal coolant supply (IKZ) 40 bar, consisting of: - Paper band filter - 600 l tank - Cabin roof - Rotary through-feed in the spindle - Double filter - Blow-off air through the spindle center - Rotating viewing window - Flushing gun for chip removal - Oil and emulsion mist separator - Infrared measuring probe, manufacturer Heidenhain TS 460 (if available) - Tool measurement system, manufacturer Heidenhain TT160 (if available) - Preparation for 3D quickSET - Automation interface PH Cell, consisting of: - Interface - 4-channel rotary through-feed - Automatic loading door - Operating mode 4 - Tracy surface interpolation - Pallet loading and unloading system PH 150, consisting of: - 10-position pallet storage Blsdpfxsz A A Dxo Amren - External electronic handwheel (if available) Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,243 h, spindle speed (max.): 20,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 75 monoBLOCK was manufactured in 2017. It features a Siemens SINUMERIK 840 D control system and a high-pressure pump for internal coolant supply at 20 bar. The machine includes a 3D measuring probe from Heidenhain and has 60 magazine positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 monoBLOCK universal machining centre we have for sale. Contact us for further details. - Spindle Power: 35 kW (40% duty cycle), 25 kW (100% duty cycle)- Tool Taper: HSK-A 63 according to DIN 69893)- Tool Magazine: Chain magazine with double gripper, 60 tool pockets (HSK-A63)- NC Swivel Rotary Table: Integrated in rigid table, 800 mm x 650 mm- Control System: CELOS with Siemens 840D sl Operate, including 21.5" ERGOline Control with Multi-Touch Screen- Features: MPC (Machine Protection Control), Chip flushing, Integrated coolant tank 500 l- Coolant / Chip Disposal included:* Production Package: Scraper belt chip conveyor with coolant system 600 liters, paper band filter, discharge height 950 mm, width 670 mm* Internal Coolant Supply (IKZ): 40 bar / 20 l/min through spindle center (AD)* External Coolant Supply: 4 bar / 40 l/min* Washdown Pistol with pump (2 bar / 10 l/min)* Oil and Emulsion Mist Extraction System: Mechanical filter, airflow rate 600 m³/h- Measuring / Monitoring:* Infrared Measuring Probe: Heidenhain TS 649 (HSK-A63)* 3D quickSET: Tooling check and inspection of kinematic accuracy for 4/5-axis machine configurations Technical Specification Bljdpfx Amjzdzmwsron Through-spindle Coolant Yes Taper Size HSK 63

Condition: used, Year of construction: 2012, machine/vehicle number: 12030320, travel distance X-axis: 810 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 620, table width: 900 mm, table length: 400 mm, overall weight: 3,500 kg, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 23, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This vertical machining center, a Saeilo Contur MMV 810 S, was manufactured in 2012 and is equipped with a Heidenhain TNC 620 control unit featuring an electronic handwheel for precise operation. Travel ranges are X = 810 mm, Y = 400 mm, Z = 500 mm, with a table measuring 900 x 400 mm and fitted with 3 T-slots (size 14 mm). The machine includes a double-arm tool changer with 23 positions, BT40 tool holder, and a high-performance spindle capable of up to 10,000 rpm, oil cooling, and an internal coolant supply system with 20 bar pressure. Spindle speed: 0-10,000 rpm Axis travels: Bledpfx Amox N E Aceren X: 810 mm Y: 400 mm Z: 500 mm Double-arm tool changer with 20 positions Tool holder: BT40 Spindle oil cooling // Internal coolant supply 20 bar Disc-type scraper in coolant tank Air blast cooling through or around the spindle External coolant gun Chip conveyor (spiral type) Central lubrication system Table clamping surface: 900 x 400 mm with 3 x 14 mm T-slots Machine weight: 3,500 kg Includes documentation.

Condition: ready for operation (used), Year of construction: 2005, Glue pot Edge application End-cutting units Flush trimming units Radius trimming units Scrapers Buffing units Bsdpsz Egkbsfx Amrjln This machine is a compact edgebander for straight workpieces, featuring application rollers for hot-melt adhesive on the workpiece edges. The end-cutting unit—which uses a single saw blade to cut both the leading and trailing edges—and the roll cut-off mechanism are controlled electro-pneumatically. The high-frequency (HF) motors for the end-cutting, trimming, and corner-rounding units are powered by an electronic frequency converter. The pressure required to bond the edge material to the workpiece is generated by spring-loaded rollers in the machine table. TECHNICAL DATA Motor power: 2 x 2.2 kW Frequency: 200 Hz Speed: approx. 12,000 rpm Motor shaft: 30 mm diameter, 58 mm length, internal M16 (left-hand thread), internal M12 (right-hand thread) Max. tool dimensions: 100 x 48 mm Max. milling depth: 3 mm Extraction: 60 mm diameter Solid edge strip thickness: 5 mm Coil edge strip thickness: 2 mm Tool height: 40 mm Tool length: 200 mm Feed speed: approx. 10 m/min MACHINE DIMENSIONS Length including outrigger: 3,540 mm Depth including roller table: 1,325 mm Height: 1,520 mm Work table height: 880 mm Work table width with support rail retracted: 210 mm Work table width with support rail extended: 680 mm Weight: 880 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, Edgebander HOLZHER, type 1310, equipped with: cartridge glue station, flush end trimming, two multi-milling units, profile scraper, buffing units, condition good Bsdpfx Amex H Suterjln

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-20-8714, functionality: fully functional, Equipment: CE marking, documentation/manual, KDF 860 Edition, serial no. 0-261-20-8714, year 2016 Feed speed 8–20 m/min, rounding 20 m/min, workpiece width 70 mm, (8–22), minimum workpiece length 140 mm, CONFIGURATION: - Pre-milling - Spray separator - EVA adhesive application with QUICKMELT top preheating, Second glue pot A12 EVA (white glue) - Infrared workpiece heating - Side pressure (4 rollers; The first pneumatical) - Trimming with SOFTTOUCH function (smooth unit start-up); straight/angle trimming, exact/with overlap - Multifunctional multi-profile milling unit (R1 + R2 + chamfer); servo-adjustment Bljdpfx Ajzuxh Hjmrjn - 2-motor SERVOTRIM rounding unit—controlled by linear motors on both axes, feed rate up to 20 m/min, soft-touch function for gentle contact of the unit with the workpiece, 4x servo-adjustment - Profile scraper unit – 4x servo-adjustment, dual-profile (R1 + R2) profiling guides with 0.01 mm step - Flat scraper unit, - Spray cleaner - Brushes, - Motorized beam lift, - Motorized infeed fence, - Full automation, - POWERTOUCH control system, - moveable workpiece support, - loading guide for narrow parts - upper belt pressure

Condition: used, mileage: 39,300 km, power: 107 kW (145.48 HP), first registration: 01/2017, fuel type: diesel, overall weight: 5,600 kg, next inspection (TÜV): 06/2026, color: blue, gearing type: mechanical, emission class: euro6, Equipment: ABS, all wheel drive, soot filter, Your MULTICAR – specialist dealer with expertise, service, and advice – offers you: MULTICAR FUMO CARRIER 4x4 with snowplow + salt spreader First registration: 24.01.2017 Mileage: 39,300 km / 2,693 operating hours Condition: Inspected, oils, filters, and wear parts replaced, workshop-checked, visually and technically fully refurbished, newly preserved Equipment: - 3.0-liter Iveco turbo diesel – low-emission according to Euro VI, 107 kW / 145 hp – short wheelbase (2,930 mm) – 4x4 drive including crawler gear - 10 forward and 2 reverse gears - Power steering - Fully synchronized 5-speed gearbox (90 km/h) Additional equipment: - 2-circuit mobile hydraulics H03-3 with simultaneous switching of work circuits - Drip-free, flat-sealing quick-release couplings - Rear hydraulic connections - Leakage line in the front, socket in the front - Quick-change mounting frame SWV 500 - Increased payload to 5,600 kg gross vehicle weight, reinforced front axle 2.7 t and rear axle 3.8 t - Tires 285 / 65 R16 M+S - Light bar on the cab roof with dimmable auxiliary headlights and work lights (for attachment equipment) - LED rotating beacon, telescoping - Work lights LED in the rear - Equipment console mounting kit 2, snowplow function - Electrically heated and adjustable exterior mirrors, electric windows - CD radio with MP3 function, FM, RDS, mute, Bluetooth - Interior mirror, comfort steering wheel - Ball hitch – trailer coupling (3.5 t trailer load) - Driver and passenger – sprung seat, headrests - Warning marking red-white, 1 set = 4 pieces Three-way tipper 2,720 x 1,495 x 400 mm with angled steel front wall extension Optional winter service attachments: Snowplow SIMED Type PMS 170 Total width 2.00 m, clearing width in angled position approx. 1.70 m, blade height 0.60 m, hydraulically pivoting, quick-change mounting, overload protection through spring suspension, rubber scraper strip, warning marking, warning flags Flat-bed salt spreader Type KIF SS – 1200 / E (used, year of manufacture 2011) Round spreader disc and chute made of stainless steel, capacity 1.2 m³ including folding roof, protective grid, warning marking, "winter service", adjustable spreading rate and spreading width via control panel in the driver's cab, spreading width from 1-6 m, spreading stop when the vehicle stops, 4 support legs Blodpfx Amoz Iidijren Other winter service equipment models in stock. Errors, changes and prior sale reserved. Our general terms and conditions apply. Benefit from our many years of experience in sales and service and have an individual offer created for you. Also take advantage of our leasing and financing options. We promise you competent advice and support from our qualified staff. You can find further offers from the commercial vehicle manufacturers MULTICAR and ISUZU, as well as a comprehensive range of attachment equipment, at Tel.:

Condition: used, Year of construction: 2010, Technical details: • Edge material thickness for strip material: 0.4–6 mm • Edge material thickness for coil material (depending on material): 0.4–3 mm • Edge material height: max. 65 mm • Workpiece thickness: 6–60 mm • Minimum workpiece width: 65 mm • Minimum workpiece length: 160 mm • Feed speed: 10 m/min • Integrated control panel on the front side, in the infeed area • Control system: PPC 221 – Power PC • Pull-out workpiece support table, extension: 600 mm Bjdpozxww Uofx Amroln • 1801 Pre-milling unit with diamond milling cutter (1 × 0.8 kW, 1 × 1.2 kW, 200 Hz, 12,000 rpm) • 1903 Edge band magazine, pre-cutting up to 3 mm • 1906 MG combined glue application unit (cartridge and granulate) • Pressure regulator for cartridge glue application with pneumatic control • 1912-3 Pressure roller unit • 1918 Pneumatic end-trimming unit • 1827 Multifunctional milling unit (pneumatic control) • 1832 Corner rounding/milling unit • 1929 Scraper unit, R = 2 mm • 1964 Flat scraper Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Bledpfx Ajzx Sxgsmrsn Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: excellent (used), Year of construction: 2004, operating hours: 29,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: Haidenhain iTNC 530, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 16,000 h, number of slots in tool magazine: 92, Equipment: chip conveyor, documentation/manual, 5-axis machining center Bsdpfozz Ahqsx Amroln Travel ranges: x = 750 mm, y = 600 mm, z = 520 mm Spindle speed range: 20 – 18,000 rpm Tool holders: HSK63 Laser tool measurement system integrated in the machine High-pressure internal cooling through the spindle center, 40 bar Tool magazine with 92 positions Year of manufacture: 2004 General overhaul: 2021 The following was done during the overhaul: Hydraulic lines replaced Linear guides and ball screws in the x, y, and z axes replaced, including bearings and timing belts Scrapers and bellows replaced Most recently (2026): Z-axis servo motor repaired Hydraulic unit for lubrication replaced AC servo controller for the x-axis replaced The machine is equipped with a 3D probe and a band filter.

Year of construction: 2006, condition: used, Manufacturer: Terlet Model: stirring kettle Year: 2006 Condition: Used Serial number: 0511170-001-001/002 Stock number: 3423 Bjdpfx Aoz E R Hgsmrjln Capacity: 2 x 1000 liters Heating: thermal oil Infeed height: 1950 mm Outfeed height: 1050 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 8.6kW (2x) Dimensions: 2900 x 5700 x 2600 mm Weight: 2 x 1500 kg 2x tilting stirring kettles with scraper agitator. Includes Endress + Hauser Promag P flowmeter. Includes Carnitech L25-1-4209 mobile lift for standard containers, year 2006.

Condition: used, Year of construction: 2022, travel -x axis 550 mm travel -y axis 400 mm travel -z axis 400 mm a-axis +/- 120 ° C-axis 360 ° control HEIDENHAIN - TNC 640 number of spindle speeds 24.000 numbers of positions in the tool changer 48 tool taper HSK-A50 5-axis simultaneous machining center | CHIRON - FZ12-S equipped with ITC (70 bar), NC swivel rotary table, 48-way tool changer & chip conveyor. The machine has only 3.606 H spindle hours. Additional equipment: - BLUM LaserControl NT - BLUM TC52 Touch Probe - Scraper Belt Chip Conveyor - KF150/500 Cooling System Blodpfx Amjz Dbyherjn The machine is in very well-maintained, like-new condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FZ12S| FZ 12-S | FZ 12 S

Year of construction: 2024, condition: like new (used), functionality: fully functional, Cream cooker "Creamco" with 80 litre bowl, demonstration model (year of manufacture 2024) with warranty, almost as good as new, only used for demonstration purposes, for puddings, batters, creams, fillings, cooked and boiled items and much more, with multi-walled stainless steel container, easy (tool-free) removal of stirring tool including plastic scrapers, digital thermostat and timer. Bodpeyugb Njfx Amrjln Mobile machine, made entirely of stainless steel, with triple wall for optimum heat insulation and even heat distribution, including side and bottom scrapers. Includes removable lid with separately closable filling opening. Also perfect for making or preparing sensitive products such as choux pastry, baking cream, chocolate, fondant, fruit jam, coatings, fillings, and similar products that require even heating and mixing/stirring. There are 2 stirring speeds to choose from, as well as stirring without heating, e.g. for pre-mixing ingredients or cooling. Manual or automatic operation via digital thermostat and timer. The kettle can be easily tilted using a crank handle to remove the product, even by more than 90 degrees, making cleaning relatively easy. AVAILABLE NOW! Technical data: Capacity: 80 litres, maximum filling quantity approx. 50 litres, recommended minimum filling quantity: approx. 7 - 10 litres, max. temperature: 150°C, thermal oil volume: 19.5 litres, heating power: 9 kW, agitator motor power: 0.6 kW / 0.8 kW (1st / 2nd speed), connection values: 400 V - 3Ph - 50Hz, approx. 10 kW, 32A CEE plug Dimensions: approx. 96 x 74 x 165 cm (W x D x H), filling height: approx. 127 cm, weight: approx. 160 kg

Year of construction: 2017, operating hours: 600 h, condition: ready for operation (used), functionality: fully functional, ROBOQBO QBO15-4 - Universal Cooking, Cutting & Mixing System - Fully Refurbished Blodoz Ellqopfx Amrjn The Roboqbo QBO15-4 is a compact all-in-one food processing system designed for manufacturers, R&D facilities and food laboratories requiring maximum flexibility and precise process control from a single machine. With a 15-litre processing vessel, QBO15-4 combines cutting, mixing, cooking, heating, cooling and vacuum processing in one integrated system. Multiple production stages can therefore be performed without transferring the product between separate machines. The system provides precise control of temperature, vacuum, pressure and variable blade speed, making it particularly suitable for recipe development, product testing, specialized production and small batches. FULLY REFURBISHED & UPGRADED The machine was manufactured in November 2017, has been completely refurbished and is equipped with a latest-generation PLC installed in 2025. The machine has only approximately 6 months of actual use and is fully functional and ready for operation. MAIN FEATURES 15-litre processing capacity AISI 316L stainless-steel construction Variable blade speed: 30-3,000 rpm Maximum processing temperature: 120°C Maximum vacuum: -980 mbar Cutting, mixing and cooking functions Controlled heating and cooling Vacuum and pressure management Automatic bowl, lid and locking movements Internal steam generator Steam pressure control and regulator Double cooling system* Temperature detection and control Micro-serrated blade with locking system Electric bowl tilting for product discharge Pneumatic extrusion opening for product discharge Overpressure system for liquid and semi-liquid products Motorized scraper on removable lid Ingredient hopper with manual valve Inspection window with LED light Condensate recovery system Washing system with 3 programs Acoustic alarms and end-of-cycle notification CONTROL & CONNECTIVITY The QBO15-4 features a touchscreen control panel with integrated operating system and Roboqbo software. Connectivity includes USB, Ethernet and WiFi, together with data updating and printing functionality. TECHNICAL DATA Manufacturer: Roboqbo Model: QBO15-4 Year: November 2017 Condition: Completely refurbished PLC: Upgraded in 2025 Actual use: Approx. 6 months Capacity: 15 litres Material: AISI 316L stainless steel Blade speed: 30-3,000 rpm Max. temperature: 120°C Max. vacuum: -980 mbar Power supply: 400 / 220 / 200 V - 50/60 Hz Motor power: 6-18 kW Dimensions: 1,240 x 997 x 1,381 mm Net weight: 263 kg incl. generator The QBO15-4 brings multiple food-processing operations together in one compact system, helping manufacturers simplify production workflows, reduce product transfers and develop new recipes with precise and repeatable process parameters. Fully functional and available for inspection under working conditions. *Double cooling system included; related accessories are optional. Water and compressed air must be supplied separately.

Condition: good (used), Year of construction: 2011, machine/vehicle number: AH005553, functionality: fully functional, total length: 8,100 mm, overall weight: 4,000 kg, Main specifications: * Panel thickness: max. 60 mm * Edge thickness: 0.4 - 3 mm (Solid wood up to 12 mm) * Feed speed: up to 25 m/min * Glue system: EVA / PUR Configuration: * Pre-milling unit * Gluing unit with pressure rollers * End-trimming unit * Top/Bottom trimming unit (rough & fine) * Corner rounding unit Bodpfxszvb Uxe Amreln * Radius edge scraper * Glue scraper * Buffing unit Machine Condition: * Excellent working condition. * Regularly maintained. * Available for inspection and testing while powered on.

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Blodpfoz Ehvxjx Amrsn