HORIZONTAL MACHINING CENTER MAKINO A55e A60 – 2003

MAKINO A55e A60

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. SK 40, 24 tool places in tool changer. Dwedpfxewk Nm Ie Ab Tof 10.000 rpm

Condition: excellent (used), grinding length: 3,500 mm, center width: 5,000 mm, Cylindrical grinding machine. Schehr Meuselwitz, model SAXW 1000. Weight: 33 tons. Centre distance: 5,000 mm. Grinding length: 4,000 mm. Concave and convex grinding direction. Total length: 9.6 meters, width: 3 meters, height: 2.4 meters. 380 Volt. The machine can be inspected under power at the seller's facility. Djdswb Dq Nepfx Ab Tswf

Condition: used, Year of construction: 1953, turning length / mm turning diameter over plate // mm faceplate diameter / mm Plane disc diameter: approx. 3600mm Centre height above plate: approx. 1500mm Turning diameter over plate: 2600mm Turning diameter in the pit: 3600mm Turning diameter over bed: 1300mm Turning length: approx. 2400mm Max. Workpiece weight: 22000kg Max. Torque on the faceplate: 5000 mkg Faceplate gear rim pitch circle diameter: 1900mm Main spindle bore: 120mm Speed range normal: 0.71-35.5 rpm increased: 1-50 rpm increased: 1.4-71 rpm Dwodpfxjua Iw Te Ab Tsf Total power: 38kW Total weight: approx. 42.5 tonnes

Condition: used, 3D Coordinate Measuring Machine ZEISS NUMEREX - Not Functional Granite Measuring Table, Granite Surface Plate, Measuring Table Model No. 3648-18, Serial No. X-1019, Year of Manufacture approx. 1986 Measuring Range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring Plate L x W 1525 x 1435 mm Usable Surface 1525 x 1100 mm Plate Thickness 305 mm Clearance Width in the Portal 1100 mm Probe Mount Ø 9.5 mm Compressed Air Connection 6 bar Power Supply 230 Volt, 50 Hz - Granite plate with steel inserts with internal threads Dwjdpfxsfy U Ewe Ab Tsf - Axis adjustment with pneumatic slide guide for X, Y, and Z axis - Plate mounted on base frame with 5 leveling feet, 3 support plates for the feet - Computer and software missing (not available and not included) → not functional! Space required for the measuring machine L x W x H 1600 x 1850 x 2200 mm Machine weight approx. 2.8 tons Plate is damaged on one side – see photo, otherwise in good condition

Condition: good (used), functionality: fully functional, Year of construction: 2003, working width: 4,300 mm, throat depth: 450 mm, distance between stands: 3,700 mm, operating speed: 120 mm/s, reverse speed: 120 mm/s, back gauge: 550 mm, overall weight: 21,500 kg, total length: 5,100 mm, total width: 2,000 mm, total height: 3,300 mm, pressing force: 300 t, Equipment: safety light barrier, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled Dwjdpfx Abewc Sbrs Tsf - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming Dwjdpfxowbvhao Ab Tjf programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: excellent (used), functionality: fully functional, rotary table diameter: 600 mm, grinding height: 300 mm, disc diameter: 400 mm, grinding diameter: 600 mm, Manufacturer: ELB-SCHLIFF Model: SWR 50 T Completely overhauled: 2008 Delivery time: immediate Dwodpfou Ed Nlox Ab Tef Grinding area: Ø 600 x 300 mm Grinding wheels: max. Ø 400 x 100 x 127 mm Spindle taper: 60 mm Installation dimensions: approx. 2800 x 2800 x 2300 mm (L/W/H) Total weight: approx. 5000 kg Control system: Siemens PLC

Condition: used, Year of construction: 2010, x-travel 730 mm y-travel 730 mm z-travel 730 mm control Matrix Nexus Mazatrol Main spindle: turning speed range - main spindle 35 - 18.000 min/-1 power capacity - milling spindle 35 / 26 kW tool taper ISO 40 DIN 69871A transmission ratio 2 pallet changer: Dwsdpfjup H Drox Ab Tsf numbers of pallets 6 (5+1) size of pallet 500 x 500 mm max. workpiece weight 700 kg max. workpiecediameter 800 mm max. workpiece height 1.000 mm change time of pallets 7 sec B-axis (table) 0,001 ° Tool-Presetter: number of toolpositions 160 pos. tool taper ISO 40 DIN 69871A max. tool diameter 95 mm max. tool-dia with free toolbox 150 mm max. tool length 420 mm max. tool weight 12 kg change-time tool to tool 2,7 / 3,2 sec feeds: rapid traverse 60 m/min feed speeds max. 60.000 mm/min total power requirement 78,5 kVA weight of the machine ca. 16,4 t dimensions of the machine ca. 7,5 x 3,5 x 3,0 m CNC - MachiningCenter Horizontal MAZAK - Nexus 5000 II - palletchanger 6(5+1) pos. - WITHOUT tools

Condition: used, Year of construction: 1999, max. wheel diameter 280 mm gear width 330 mm max. module 5 min. module 1 Control LIEBHERR CNC Djdpfx Abot Hwu Ao Tswf total power requirement 28 kW weight of the machine ca. 12 t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2001, For sale LVD PPEB 80/25 in very good technical condition. Dsdpfx Absrx S Hno Towf Under power, can be inspected any time