Used Extraction for sale (4,539)

Condition: used, functionality: fully functional, Alsident System Extraction Arms. The extraction arm of the Alsident System brand is designed to keep the breathing atmosphere clean during work. This extraction arm is suitable for both ceiling mounting and for the wall of a work table. Good working condition. Please check out our other listings as well. Crodpfx Asupv U Hoiioi

Condition: used, Year of construction: 2012, machine/vehicle number: 02 13 2202, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, volume flow: 16,000 m³/h, suction capacity: 16,000 m³/h, actuation type: electric, Equipment: CE marking, documentation/manual, Industrial dust extraction and filtration system, built in 2012 by the Italian company SILVI & C. S.r.l. The system is complete with a 22 kW fan, cartridge filtration system, automatic filter cleaning using compressed air, control panel, and STS CO₂ fire suppression system. Technical specifications: Manufacturer: SILVI & C. S.r.l. – Italy Year of manufacture: 2012 Serial number: 02 13 2202 Credpfs Ahrk Nox Aiisi Airflow rate: 16,000 m³/h Static pressure: 350 mm H₂O (approximately 3,430 Pa) Electrical power: 22 kW ATEX classification: II 3D – Zone 22 – T 150 °C CE marking Electrical supply: 400 V Equipment: 22 kW industrial fan Cartridge filtration system Automatic compressed air filter cleaning system TURBO electronic control unit for filter cleaning management Main electrical panel with controls and protections STS CO₂ fire suppression system Two lower containers for dust collection Inspection and maintenance access doors Condition: Used system, functional and complete with fan. Machine manual and electrical diagram dated December 2012 are available. Further information and photographs available upon request. Transportation not included. Any dismantling and loading operations will be agreed upon separately.

Condition: used, Year of construction: 2006, functionality: unexamined, volume flow: 25,300 m³/h, filter area: 123 m², actuation type: electric, total height: 4,600 mm, total length: 5,540 mm, total width: 1,800 mm, Equipment: CE marking, In operation at our facility until week 31 of 2026. For sale after consolidating several smaller filters into a single, larger filter housing. Material extracted: wood chips and wood dust. Filter hoses replaced in 2020. Documented maintenance: 2012, 2020, 2024. Scope of sale: - 1 Rippert RDSN 7 filter housing; L 5.6 x W 1.8 x H 4.6 m - 1 cyclone separator incl. steel frame; L 2.4 x W 2.4 x H 8 m - 2 raw air fans - optional associated piping, without additional cost - optional spare parts: 2 matching raw air fans, new, balanced, manufactured in 2025, plus €2,500 net Credo Ahhhwepfx Aiiji Sale from the foundation. Inspection possible. Subject to prior sale.

Condition: like new (used), Year of construction: 2016, AL-KO POWER UNIT 300 incl. briquetting press Alko Type 300P-BP 30-50 Suction nozzle 300 mm Motor rated power 7.5 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow rate 6,000 m3/h Rated volume flow rate* 5,089 m3/h Negative pressure at rated volume 2,587 Pa Filter area 30 m2 Crjdpfxs Ahw T Do Aiisi Pre-separator integrated Extinguishing system integrated Control for 8 machines Chip collection volume (net/gross) briquetting press 900 liters Sound pressure level 71 dB(A) Dimensions (L / W / H) in mm 3,000 x 1,361 x 2,817 Briquet diameter 50 mm Net weight without packaging 1,570 Absolutely new condition, from a school workshop

Condition: good (used), Year of construction: 2014, machine/vehicle number: 1040070, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 5,200 m³/h, filter area: 1.9 m², noise level: 76 dB, actuation type: electric, total height: 1,460 mm, total length: 1,250 mm, total width: 820 mm, overall weight: 140 kg, Used, fully functional dust extraction unit from Schuko in a robust industrial design. Ideal for extracting wood dust and shavings from woodworking machines. Thanks to its mobile design, it can be used flexibly in the workshop. Manufacturer: Schuko Model: MiniMax F 300 Year of manufacture: 2014 Good used condition Ready for immediate use Crjdpe Af I Sxjfx Aiiji If you have any further questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 4000000783, functionality: fully functional, input voltage: 400 V, input current: 3 A, input frequency: 50 Hz, type of input current: AC, volume flow: 1,200 m³/h, suction capacity: 1,200 m³/h, intake manifold diameter: 150 mm, noise level: 75 dB, actuation type: electric, total height: 620 mm, total length: 1,450 mm, total width: 620 mm, overall weight: 130 kg, year of last overhaul: 2026, Equipment: CE marking, Fully serviced and inspected dust extraction system. Ready for immediate use. Crodpe Agvwajfx Aiisi

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 457256, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 5,100 m³/h, Equipment: CE marking, documentation/manual, VACUMOBIL JZ300-L Anti-static material surcharge Cedpfx Ao Ad I Nvsiieri Suction nozzle, Ø220mm - PZR "Online" dust extraction surcharge, Jx300 French documentation

Condition: good (used), Year of construction: 2001, machine/vehicle number: 077359, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 22 A, input frequency: 50 Hz, volume flow: 7,500 m³/h, intake vacuum (max.): 30 mbar, suction capacity: 7,500 m³/h, intake manifold diameter: 300 mm, filter area: 36 m², noise level: 76 dB, actuation type: electric, total height: 4,000 mm, total length: 1,600 mm, total width: 2,250 mm, overall weight: 1,000 kg, year of last overhaul: 2025, Due to the purchase of new equipment to expand our machinery, this functional dust extraction unit is for sale. It can be inspected up to week 42; after that, we will dismantle it. The impeller was replaced in October 2025 – a parts invoice is available. Codpfxjz Erfdj Aiieri

Year of construction: 2024, condition: used, functionality: fully functional, Exhaust hood M4000 Technical specifications for each exhaust hood: Working width 4,000 mm Working height 3,000 mm Overall width 4,050 mm Overall height 3,050 mm Overall depth 750 mm Airflow rate 15,000 m³/h Fan 2 units, Atex Motor 2 x 3.6 kW, with Ex protection Crjdpfxe Ahmwyo Aiioi Scope of supply for the exhaust hood: 1 Exhaust hood housing, consisting of modules, entirely made of galvanized sheet metal 1 Set of labyrinthine pre-filters made of paper 1 Set of filter mounting frames with filter material made of glass fiber 2 Radial fans with spark protection, Ex protection

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25787, rotational speed (max.): 1,500 rpm, inlet: 400 mm, input voltage: 380 V, extraction nozzle diameter: 400 mm, input frequency: 50 Hz, input current: 12 A, Description For sale is a robust industrial extraction fan / chip extraction fan from a stationary extraction system of a wood processing production facility. The fan was in regular use until recently. Before the sale, a test run was carried out: the fan starts reliably and runs smoothly, considering its age. The start-up was documented in a video; the video can be sent to serious potential buyers upon request. The existing control cabinet of the extraction system, including the fan control, is also included in the scope of delivery. The control cabinet is complete. Due to the labeling, it can be seen that the control originally controlled other functions of the filter system in addition to the fan (including vibrator and discharge). Technical data fan / motor Motor manufacturer: Rüetschi & Co. AG, electric motors, CH-5040 Schöftland Motor type: KMER 160 M-4 Motor No.: 25787 Power: 11.0 kW / 15 HP Motor voltage according to nameplate: 380 / 660 V Current according to motor nameplate: 23.0 / 13.0 A Frequency: 50 Hz Speed: 1,500 min-1 Protection class: IP44 Insulation class: B Design: stationary industrial radial / extraction fan Control cabinet / control System designation: Extraction system Year of construction control: 06/1995 Rated voltage: 3 x 400 V / 50 Hz Power: 11 kW Crodpfjz Ikxzox Aiiji Rated current: 23 A Fuse: 35 A Control voltage: 230 V Wiring diagram No.: 95-189-1 Existing control cabinet including fan control included in the scope of delivery Condition Used, functional condition with signs of wear and tear due to age and use. The current test run was successful. Inspection and functional demonstration possible by appointment. Video of the test run available upon request. Location / Dismantling Location: 3608 Thun, Switzerland. The fan and the control cabinet are still installed. Dismantling, removal, loading and transport are carried out entirely by the buyer at his own expense and responsibility. Terms of sale Sale from location. Sale in the existing used condition, as inspected. No guarantee or warranty, as far as legally permissible. Technical data provided to the best of our knowledge; errors and prior sale reserved. Inspection on site possible and recommended by appointment. Selling price: 1,000.00 EUR Price net, any statutory taxes and duties apply. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 2006, functionality: fully functional, power: 37 kW (50.31 HP), filter area: 169 m², total height: 5,950 mm, total length: 4,650 mm, total width: 2,250 mm, For sale is a complete industrial Aagaard/Finnrose extraction and filtration system, built in 2006, from a wood processing company. The system is designed as a screw filter and includes a complete extraction control system with heat recovery. The main fan is an Aagaard AVD 40 HF/240 with 37 kW. The filtration system has approximately 169 m² of filter area with a total of 128 filter elements, each approximately 2,000 mm long and Ø 210 mm. The discharge is carried out via a discharge screw and a rotary valve airlock. Below the discharge, there is a suitable container with a volume of approximately 6 m³ on a mobile cart, which is included in the scope of delivery. The complete control cabinet for the extraction control system and heat recovery is part of the system. The control cabinet includes, among other things, the controls for the rotary valve airlock, discharge screw and four cleaning groups, as well as a Schneider-Electric frequency converter for the extraction fan. Technical data Aagaard / Finnrose industrial extraction system / screw filter Year of construction: 2006 Main fan: Aagaard AVD 40 HF/240 Motor power main fan: 37 kW Filter area: approx. 169 m² Filter elements: 128 pieces Dimensions of filter elements: approx. length 2,000 mm / Ø 210 mm Electrical system: 3 × 400/230 V, 50 Hz Rated current control cabinet: 160 A Discharge via discharge screw and rotary valve airlock 4 cleaning groups Complete control cabinet for extraction control and heat recovery Frequency converter for main fan Heat recovery / return air system available 6 m³ container on a mobile cart included Existing steel substructure can be taken over Extensive existing pipelines available upon agreement Dimensions Credpfx Aioz Ik Atsiji Filter tower incl. rotary valve airlock: approx. 5,950 × 2,280 × 4,632 mm (L × W × H), height from steel substructure. Steel substructure: approx. 5,500 × 2,800 × 2,250 mm (L × W × H from the ground). Total height of filter tower incl. substructure: approx. 6,882 mm. Availability / Dismantling Sale possible immediately. The system is located at CH-3608 Thun, Switzerland. The complete dismantling and removal must be completed no later than July 31, 2027. Dismantling, loading, transport and any customs clearance will be carried out entirely by the buyer at his own expense and responsibility. All necessary skilled personnel, lifting equipment, cranes and means of transport must be organized by the buyer. Inspection possible by appointment. Sale ex works in its current condition. Technical specifications provided to the best of our knowledge, without guarantee; inspection by the buyer before purchase is recommended. Selling price: 19,500.00 EUR Price net, any statutory taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: good (used), Year of construction: 2008, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Valco, stainless steel filter system -Type: Pidclean-32 -Cartridge filter: see photos Crjds Ah Tuwepfx Aiisi -Inlet: Ø250 mm -Extraction capacity: 4000 m³/h -Pressure: Pa -Engine power: 7.5 kW -Installation dimensions: 1270/1200/H2900 mm -Weight: 523 kg

Condition: used, Radial fan REITZ, Type: MAE Manufacturer's No. 601475, Year of manufacture 2017 Volume flow rate 4260 m³/h = 71 m³/min. Pressure p 1.2 kg/m³ Air inlet Ø 250 mm (flange diameter in the base plate) Air outlet 245 x 195 mm Motor speed 2915 rpm Credpfxe Ah Ig Ds Aiiji Motor power 7.5 kW Mains connection 400 Volts 50 Hz - Fan impeller with 9 fan blades - Directly flanged drive motor - Flange dimensions for air outlet 310 x 260 mm - Sturdy metal housing made of 5 and 6 mm steel Space requirement L x W x H 1390 x 1030 x 600 mm Weight of radial fan 200 kg Very good condition, only test run completed.

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning system, rotary airlock, silencer, frequency converter, control cabinet/controller, and extensive ductwork. The dust extraction system was operated inside the production hall, and the filtered return air was returned to the production area. The filter system has an H1 rating and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial number: 000909 Volume flow rate: 10,500 m³/h Filter area: 62.5 m² Weight of filter system: approx. 1,600 kg Filtration: Surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter housing: approx. 2,600 mm H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is rated separately with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency converter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of vanes: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Delivery rate: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: Included with the system: - Silencer, connection Ø 400 mm - Return air ducting to the production hall - Complete system control - Danfoss frequency converter - Automatic pneumatic filter cleaning - Rotary airlock - Extensive galvanized dust extraction and return air ducting Large parts of the existing ductwork can be taken over after consultation. The system is still in its assembled condition. This allows the layout, duct routing, and existing components to be inspected and documented before purchase. Location / Sale: Codpfxez Ikzpj Aiijri Location: 3608 Thun, Switzerland Available: immediately Dismantling no later than: 07/31/2027 The system will be sold in its currently assembled condition. Dismantling, removal, loading, and transportation will be carried out entirely by the buyer at their own expense and responsibility. In the event of a sale to a foreign country, transportation, export/import, and customs duties will also be borne by the buyer. Inspection possible by appointment. Sold as is, without warranty. Selling price: 12,500.00 EUR Price net, any applicable taxes and duties will be added. Export, customs duties and import duties are the responsibility of the buyer.

Condition: used, Nederman Industrial Extraction System, Fume, Welding Extraction and Dust Collector Nederman Industrial Extraction System, Fume, Welding Extraction and Dust Collector, Used machine Manufacturer: Nederman (Helsingborg, Sweden) Filter unit / Extractor type: Nederman Crjdj Ahp Dnepfx Aiisi Fan type: FQ 401 N4A RD 112 RDO Year: 2013 Airflow capacity: max.: 5200-5600 m3/h operating: 3800-4400 m3/h Overall dimensions: Width: 1250 mm Depth: 1480 mm Height: 2320 mm Motor parameters (Seipee electric motor): Power: 4 kW (2P, 112, 50Hz) Manufacturer: Seipee Protection class: IP55 Features: Built-in cassette / bag filter system Complete electrical control box mounted on the unit Standalone, high-capacity centrifugal fan unit Lower dust collection container / bin Suitable application areas: Extraction and filtration of dry dust generated during grinding, sanding, and material preparation. Cleaning of welding fumes, plasma, and laser cutting gases. Centralized or individual dust removal for workshops and machining cells.

Condition: excellent (used), Year of construction: 2022, NESTRO dust extraction system Capacity: approx. 20,000 m³/h Filter area: 175 m² Vacuum fan: 22 kW The filter is equipped with an automatic filter bag cleaning system, an air return system, control system, and fire and explosion protection. Technical data: Manufacturer: NESTRO / Netecs Type: NFP 9/9/30 Year of manufacture: 2022 Production number: 22/6014 System capacity: approx. 20,000 m³/h Max. filter capacity: approx. 22,000 m³/h Vacuum fan: 22 kW Filter area: 175 m² Number of filter bags: 81 pcs. Bag dimensions: DN 230 × 3000 mm Max. filter vacuum: 4000 Pa Max. dust moisture: 15% Filter cleaning: automatic, vibration-based Codpe Af Utzofx Aiijri Cleaning without compressed air Filter emptying: rotary airlock Construction: galvanized sheet metal, 2 mm thick Noise level: < 80 dB(A) Filter voltage: 400 V Frequency: 50 Hz Filter weight: 3612 kg Variable frequency drive: 22 kW Equipment and safety: automatic vibration-based filter bag cleaning antistatic filter fabric, category C dry extinguishing system certified explosion-proof flaps/panels design compliant with ATEX requirements fire damper on the air return adjustable air return damper 0–100% control of fan, rotary airlock, cleaning, and safety features pressure sensor and automatic capacity adjustment via a variable frequency drive ladder and service platform TECHNICAL CONDITION: PERFECT!!!!

Condition: used, Nederman Industrial Extraction System, Fume, Welding Extraction and Dust Collector Cjdpfx Ais Ahqhnjijri Nederman Industrial Extraction System, Fume, Welding Extraction and Dust Collector, Used machine Manufacturer: Nederman (Helsingborg, Sweden) Fan type: FQ 561 N4A RD 160L/2P B3 RDO (NCF 160/25) Year of manufacture: 2013 Overall dimensions: Filter unit dimensions: 1650 x 1530 x 4920 mm (1200 x 1510 x 4180 mm) Fan unit dimensions: 1200 x 1100 x 1120 mm Motor and fan parameters: Motor power: 18.5 kW (2P, frame size 160, 50 Hz) Max speed: 3000 rpm Features: High-capacity multi-module filter housing with cassette filter elements Built-in control box mounted on the filter unit High-capacity standalone 18.5 kW Nederman NCF 160/25 centrifugal fan Includes ductwork sections and adapters for installation Lower hopper and dust collection bin Suitable application areas: Extraction and filtration of dry dust generated during grinding, sanding, and material handling. High-capacity extraction of welding fumes, plasma, and laser cutting smoke. Centralized dust extraction system for complete workshops or multiple machining stations

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 43 m³/h, filter area: 43 m², Equipment: CE marking, documentation/manual, a SCHUKO dust extraction system with 5 metal containers and a 43 m³ filter area; can also be sold as a complete set including the entire installation. Csdpfx Ajzzzg Soiieri

Condition: excellent (used), Year of construction: 2000, For sale is a Höcker Polytechnik Vacumobil system. The unit is fully functional and can be inspected and tested on site. Cedpeylciwsfx Aiisri The sale is carried out on behalf of a customer. Machine location: Friedeburg region. Machine details: - Year of manufacture: 2000 - Extraction diameter: 300 mm - Motor power: 7.5 kW - Nominal air flow rate: 5320 m3/h - Mobile on castors Price is net, plus VAT. An invoice for the machine will be issued. Shipping of the machine can be arranged at additional cost. Feel free to contact us with any questions or if you are interested! Your JG Holztechnik Team from 26188 Edewecht.

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 28 m², total height: 2,500 mm, total length: 3,150 mm, total width: 1,030 mm, overall weight: 900 kg, Wood chip extraction system, dust extraction system, self-cleaning filter, vacuum system – Hoecker Polytechnik brand. Model: Vacumobil JT 300 – with pneumatic cleaning of filter bags using compressed air during operation. Year of manufacture: 2009 Fan power: 7.5 kW Capacity: 6,000 m3/h Filtration area: 28 m2 Air return Cjdez Nxxaepfx Aiisri Dust tank capacity: 495 liters Equipped with an automatic fire suppression system Inlet diameter: 300 mm Stock number: 1172

Condition: excellent (used), Year of construction: 2012, Air capacity : 6000 m3/h Engine size : 7,5 Kw Inlet tube diameter : 300 mm Noise : 71 db Filter area : 30 m2 ( 90 filter bags ) 3 x 165 L waste buckets Fire extinguishing system Transport dimentions : L 3000 x W 1100 x H 2300 mm Weight : 950 Kg Cedpfx Ao Agnrysiiori

Condition: good (used), Year of construction: 2006, functionality: fully functional, Stationary dust extraction unit Manufacturer: TEKA Model: Deltar Operating hours: 2234 Airflow rate: 5000 m³/h Max. static pressure: 3000 Pa Rated current: 8.5 A Frequency: 50 Hz Control voltage: 24 V Connection voltage: 400 V Protection class: IP 54 Power supply: 3-phase + N + PE Weight: 350 kg Motor power: 4 kW Crodpfj Ahnaqsx Aiioi

Condition: used, Year of construction: 2002, Extraction system Manufacturer: Schuko Type: Vacumat 160 Credpfx Aio Ah E Rwsisi Year of manufacture: 2002 Technical data - V Nominal flow rate: 1950 m3/h - V min.: 1441 m3/h - Motor power: 2.2 kW - Nominal speed: 2850 RPM - Nominal current: 4.6 A - Nominal operating voltage: 400 V - Frequency: 50 Hz - Fan motor: 3-phase 400 V, 2.2 kW, 50 Hz, 2800 RPM Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: repair required (used), functionality: not functional, operating hours: 12,015 h, power: 11 kW (14.96 HP), input voltage: 11 V, intake manifold diameter: 500 mm, filter area: 213 m², total height: 7,500 mm, total length: 3,000 mm, total width: 3,000 mm, 213 m² filter area (standard filter hoses), vibrating motor, fire protection damper in the return air duct, motorized adjustment of the return air (inside/outside), fire hose, approximately 27 m³ intermediate silo, articulated arm discharge to the press. Briquetting press: motor 11 kW, 12,015 operating hours. The hydraulic pump was replaced and the hydraulic block was overhauled at approximately 10,000 hours; the hydraulic cylinders are leak-proof. The press operates in automatic mode with a level sensor; a second sensor is activated when the silo is overfilled. The briquettes have a diameter of 70 mm, and the density can be adjusted. The system requires repairs: the chrome plating on the clamping chuck is worn off. Since the system has not been in operation for 12 years, the electrical system needs to be overhauled, and the mechanical components need to be serviced. I would assist with the dismantling; a forklift is available. Crjdpfx Aiez R Suljioi

Condition: used, Year of construction: 1998, machine/vehicle number: 980919, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, volume flow: 3,450 m³/h, intake vacuum (max.): 3,550 mbar, suction capacity: 3,450 m³/h, intake manifold diameter: 250 mm, filter area: 23 m², total height: 2,959 mm, total length: 2,500 mm, total width: 1,238 mm, overall weight: 750 kg, Used clean air system for two to three woodworking machines operating simultaneously. Can be installed outdoors. New units can be installed upon request. The control system is equipped with a speed control function via a frequency converter. Crjdpfxozukule Aiiji