Used Scraper for sale (727)

Condition: refurbished (used), Diosna W 240 AFT wendel mixer with 2 bowls 240kg dough 2 speed frequency controlled original Diosna digital control panel temperature measurement scraper shorter kneading time fast dough sequence Dkjdpfxewhxkqo Ac Noh lower dough heating suitable for all types of dough, thanks to the gentle kneading capacity in flour 150kg bowl contents 370 liter

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Deckel Maho DMU 50 evo Linear with TNC 530 control from Heidenhain, TOP condition Technical data: >> Year of manufacture 2006 >> Manufacturer Heidenhain, type iTNC 530 >> Travel paths X500/Y450/Z400 >> C-axis 360 degrees >> B-axis 0 degrees to 161.955 degrees >> Tool holder HSK A63 >> Max. spindle speed up to 18000 rpm >> Feed continuously programmable up to X, Y, Z 20000 mm/min C-B axis continuously programmable up to rapid traverse speed >> Rapid traverse Y- Z axis 50 m/min X-axis 80 m/min (linear drive) B-axis 40 rpm C-axis 50 rpm Dodpfx Aovyr Tdec Njkh >> Tool magazine: Double gripper 60 magazine spaces >> Table clamping area Ø 500 x 380 mm T-slot spacing 63/14H7 >> Table load 200 KG >> Dimensions and weight: approx. Machine without control and attachments Depth 3.0 meters Width 2.4 meters Height 2.6 meters Weight approx. 7000 kg >> Operating voltage 400 V >> electr. Handwheel Heidenhain HR 410 >> Power connection 17 KVA >> Chip conveyor >> Active spindle cooling >> Mist extraction >> IKZ 40 bar >> Coolant lubricant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Sealing air on the measuring system >> Preparation for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control Cpvnunmsoi >> Complete documentation Dn2F2R The following work was carried out: >> Generally overhauled main work spindle >> Complete maintenance: All cooling hoses and pneumatic hoses replaced, new filters, fluids and belts replaced. Scrapers, etc. Complete cleaning. >> Geometrically measured (acceptance protocol) About the machine: A Deckel Maho DMU 50 evo Linear machining center with a TNC 530 3D path control from Heidenhain is offered. The machine is in very good condition. The main spindle on the DMU was overhauled (replacement spindle), completely serviced and an acceptance protocol was created. Take advantage of the opportunity to view and try out the machine on site with power on.

Condition: good (used), The HOMAG KL 78 is a high-performance single-sided edgebander designed to meet the needs of industrial production. With advanced technology and versatile configuration, this machine is ideal for quickly and precisely processing panel edges with excellent quality. Main Features: - Homatic Numerical Control for intuitive and precise operation management. - Grinding Units to ensure perfect surfaces. - Gluing Unit with Pre-Glueing for uniform adhesive application with minimal waste. - Edge Pressure Unit for a stable and durable finish. - Double End Trimmer for fast and precise edge finishing. - Overlapping Double Refiner for smooth and flawless edges on both sides of the panel. - Multi-function Rounder for complete and detailed edge processing. - 0°/90° Milling Group for highly precise and finished edges. Dodouh Acaopfx Ac Nekh - Edge Scraper and Glue Scraper for a flawless cleaning and perfect finish. - Brushes for thorough cleaning and surface finishing. - Available Space for Additional Units for further customization. - Spare Tool Groups for easy and continuous maintenance. With the HOMAG KL 78, every edging operation is made simple and fast, boosting production efficiency without compromising on quality.

Condition: good (used), Technical Specifications: • Minimum panel width: 55 mm • Minimum panel length: 140 mm • Panel thickness (min/max): 10 - 60 mm • Edge thickness: 0.4 - 3 mm • Maximum strip thickness: 12 mm Components and Functions: Composition Grinding units eeders End trimmers Trimmers Corner rounders Edge scrapers Dksdsi E S Rlepfx Ac Nsh Brushes

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Panel height: 60 mm Edge thickness (roll): 3 mm Edge thickness (strip): 12 mm Panel length: 3200 mm Calibrating unit End trimming unit Overlapping trimming unit RS-502 Dkedox Nav Rjpfx Ac Nsh Chamfering unit RF100 Rounding unit with two motors Edge scraper unit Glue scraper unit Brushes unit Blower/Hot air unit SMART TOUCH 23" control

Condition: good (used), Year of construction: 2016, operating hours: 16,977 h, functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 50 mm, feed rate X-axis: 18 m/min, edge thickness (max.): 3 mm, total length: 6,000 mm, workpiece height (max.): 60 mm, overall weight: 3,000 kg, SCM OLIMPIC K 800 - T-ERL EDGEBANDER EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge Capacity, 0.4 to 8 mm (0.016 to 5/16") for strip feeding. -- Panel Capacity, min. width 50 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 3.0 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0 - 15, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit: Top/Bottom, 2 x 1.0 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "RC-V": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.Operator Interface: -- Startouch Controller, 12" color touch screen, swivels 270 at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 36/52 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all trimming units. -- Electronic, programmable hold-down pressure beam positioning, lighted safety/sound enclosure cover and outboard panel support. -- Actual Model: OLIMPIC K 800 T-FR2 Djdexxy Rkopfx Ac Njkh 2 glue tanks + 1 glue tank for spare parts

Condition: new, Year of construction: 2024, machine/vehicle number: 30065973-10, Unused 100-liter Ekato Twin Motion Vacuum Mixer, model UniMix, type SRC 100, with 316L stainless steel product contact surfaces. It has a 100-liter maximum working capacity and a 5-liter minimum working capacity, rated for -1/+2 bar (29 psi and full vacuum) at 133°C, and jacketed for -1/+4 bar (58 psi and full vacuum) at 151°C. Features include a top-mounted Ekato Paravisc axial Z-type mixer with bottom and sidewall scrapers, driven by a 3 kW motor. It also has a bottom-mounted Ekato S-Jet 500 high-performance rotor/stator homogenizer powered by a kW motor, 480 volts, and a control panel with PLC and VFD controllers, as well as an operator HMI. The vessel is ASME-rated, with Ekato project# 30065973-10, built in 2024. The system is unused, still on its original shipping skids from Ekato, with FAT performed. Dkedpfxoyba Sze Ac Nsh

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 280 kg, type of input current: three-phase, compressed air connection: 6 bar, input voltage: 400 V, input current: 10 A, input frequency: 50 Hz, pneumatic connection: 6 bar, pressure: 6 bar, operating pressure: 6 bar, We are offering this used BI-MATIC Prima Plus 7.3-r.a. Edge Bander Partnership Edition, year of manufacture 2021. Units/Assemblies: - Jointing cutter unit including AIGNER diamond jointing cutter heads, with DIA interchangeable knife system Konstantin and controlled edge air-blow nozzle located behind the second jointing cutter head. - End trimming saw unit with extraction device, including pneumatically swiveling saw blades, adjustable and programmable from the control panel. - Radius milling unit. - Corner rounding unit (copy milling unit) with insert shelf function and 2-position turret. The entire unit can be pneumatically engaged and disengaged. - Radius scraper unit, engageable and disengageable, including extraction device with chip collection box for scraper shavings. - Flat scraper unit with 4-way usable scraper blades. The entire unit can be engaged and disengaged. Removed glue residues are extracted. - Buffing unit with 2 diagonally arranged cloth buffing wheels. Equipment: - High-gloss package: Roller scanning for radius milling unit, radius scraper unit, and flat scraper unit - Large viewing, noise, and safety cabin for all units and the glue pot Dkjdpfx Acoya I Ubs Njh - Interior lighting - Operating panel with 12" touchscreen and intuitive user guidance - USB port for data backup and transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue pot with quick-change system and energy-saving mode in standby - Glue roller with feed screw for long and high workpieces (especially for PUR adhesive) - Pressure zone with motor-driven first pressure roller - Heavy-duty guillotine shears for 54 x 3 mm edges - Adjustable infeed guide via handwheel (jointing thickness adjustment) with digital display - Upper roller pressure beam with digital workpiece thickness display and handwheel adjustment - Pressure zone with digital display and handwheel adjustment - Manual 2-position turret for radius milling unit - Manual 2-position turret for corner rounding unit - Manual 2-position turret for radius scraper unit Technical data: Edge thickness: 0.4 - 3 mm Minimum panel width (without corner rounding unit): 80 mm Minimum panel width (with corner rounding unit): 130 mm Minimum panel length (without corner rounding unit): 100 mm Minimum panel length (with corner rounding unit): 300 mm Minimum panel thickness: 10 mm Maximum panel thickness: 50 mm Feed speed: 9 m/min Extraction port: 2 x 150 mm Connection: 9 kW - 400 V Compressed air: 6 bar Order no.: BIMA0650 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2016, operating hours: 27,412 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, controller manufacturer: Siemens, controller model: 840D sl, table width: 400 mm, table height: 30 mm, table length: 500 mm, table load: 500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,956 h, coolant supply: 80 bar, spindle motor power: 32,400 W, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a Starrag HEC 400 F 4-axis machining center, which was fully inspected and overhauled at the Starrag factory in 2022. All relevant components were checked and replaced or adjusted as needed during this process. Since its installation in 2022, the machine has been in operation at our facility and is currently under power for ongoing production. It is in well-maintained technical condition and has been serviced regularly. Technical Highlights • Starrag HEC 400 F – 17211, 4-axis machining center for milling / drilling / turning • Control: Siemens Sinumerik 840 D solution Line with NCU710 and PLC integration • Spindle: HSK-A63 motor spindle, speed range 50 – 18,000 rpm, torque 130 Nm (25% duty cycle), power 32.4 kW / 24 kW (100% duty cycle) • Factory inspection in Chemnitz (2022): all assemblies checked, adjusted, and renewed as needed • Direct-drive NC rotary table, 80 rpm, 400 Nm drive torque, 3,000 Nm tangential torque • Siemens spindle diagnostics & remote diagnostics (TeamViewer) • Energy-efficient system with regeneration and standby mode for energy savings Working Area & Dimensions • Travels (X/Y/Z): 650 / 650 / 680 mm • Pallet size: 400 × 500 mm with 57 × M12 threaded holes • Max. workpiece height: 850 mm • Max. load per pallet: 500 kg • Pallet changer: 2 pallets – automatic, changeover time approx. 8 s • Tool magazine: 60 tool positions (chain magazine), chip-to-chip time 3 – 4 s • Chip conveyor: scraper belt conveyor with vacuum gap sieve, discharge height 1,050 mm • Machine dimensions (L × W × H): approx. 5,150 × 2,800 × 3,025 mm • Machine weight: approx. 11,500 kg • Noise emission: ≤ 80 dB(A) according to EN ISO 3744 Additional Equipment • 6-channel clamping hydraulics (90 bar) at setup and working positions • Increased spindle torque (130 Nm) for high-performance cutting • Torque support with axial supports • Coolant system: connection to central supply incl. return and temperature compensation • Increased coolant pressure to 80 bar through spindle center • Optical measuring probe Renishaw OMP60 incl. Siemens measuring cycles • Tool breakage detection (mechanical, parallel to main time) • Pallet sequence operation + crane loading/unloading (software) • Signal lamp (4-color) for operating status • Work area/machine equipment: shower nozzle, rinsing pistol, vortex nozzle, extraction interface, foot switch blow nozzle • Documentation: fully digital (PDF) Operating Hours / Run Times • Power-on hours: approx. 27,412 h (as of Oct 2025). The counter runs as soon as the machine is switched on – including during setup, maintenance, or idle times. • Total spindle running time: 9,956 h Special Features • OPTIONAL: With perfect post-processor and CAD/CAM software TOP Solid (at extra cost) • Under power – demonstration possible at any time • Directly from production – not a dealer sale • Complete technical documentation available • Support with dismantling, loading and transport available (at extra cost) The tool holders and vise visible in the photos are not included in the offer, but can be purchased separately if desired. Dsdpfex H Idksx Ac Nskh Price: €135,000 net, negotiable for quick completion. All information has been provided to the best of our knowledge and belief. Subject to changes, errors, and prior sale.

Condition: new, Catalogue No.: HZ014 – Pre-milling – Corner rounding – Brand new machine in stock – CE certificate – Professional grade TECHNICAL DATA Panel thickness: 8–45 mm Edge thickness: 0.4–3 mm Min. panel width: 90 mm Min. panel length: 170 mm Feed speed: 9 m/min Pre-milling speed: 12,000 rpm Front/rear milling: 12,000 rpm Top/bottom milling: 12,000 rpm Corner rounding: 12,000 rpm Polishing: 3,000 rpm Feed motor power: 1.13 kW Glue tank heating power: 1.315 kW Pre-milling motor power: 1.5 kW Preheating power: 0.4 kW Glue spindle power: 0.25 kW Front/rear milling motor power: 0.22 kW Top/bottom milling motor power: 2 × 0.37 kW Corner rounding motor power: 0.37 kW Polishing motors: 0.12 kW and 0.18 kW Total motor power: 6.16 kW Working table height: 960 mm Extended support width: 560 mm Extraction port: 3 × 125 mm Dimensions (L × W × H): 3731 × 720 × 1636 mm Weight: 915 kg Holzing G-MAX 480 straight-line edge bander with pre-milling, saw cutting, top-bottom milling, corner rounding, radius scraper and polisher ensures a high-quality finish on the workpiece. It handles edge banding from coils up to 3 mm thick and strips up to 4 mm thick. The machine is equipped with a 1.2 kg capacity glue tank. Net price: 98,000 PLN Net price: 23,300 EUR based on an exchange rate of 4.2 EUR (Prices may change in the event of significant fluctuations) Dsdsx S Iypepfx Ac Nekh

Condition: excellent (used), Year of construction: 2010, Single-sided edge banding machine for processing straight workpiece edges as well as applying and post-processing various edge materials in both longitudinal and transverse feed directions. OVERVIEW OF THE EQUIPMENT CONFIGURATION: - POWER CONTROL PC 20+ electronic control - PU upper pressure rollers instead of rubber rollers - Workpiece gap optimization - Infeed fence extension by 300 mm with additional device for laminate overhang - JOINTING MILLING UNIT 2 x 2.2 kW 200 Hz - GLUING UNIT A12 with automatic edge feeding – Quickmelt application unit – Standard application unit interchangeable for PU glue - Pressure zone with motorized adjustment - END TRIMMING UNIT BEVEL/STRAIGHT 2 x 0.35 kW - PNEUMATIC ADJUSTMENT END TRIMMING BEVEL/STRAIGHT - PNEUMATIC 2-POINT ADJUSTMENT END TRIMMING - PRE-MILLING UNIT 2 x 0.55 kW counter-rotating – with PNEUMATIC 2-POINT ADJUSTMENT (flush and radius/chamfer milling) – Program control for side tracing rollers stepless and edge thickness – Multi-roller tracing - MULTIFUNCTION PROFILE MILLING UNIT 2 x 0.4 kW with exchange system and quick-change heads Dkedpfx Acsx S I Iyo Njh - PROFILE SCRAPER WITH QUICK-CHANGE HEADS - Special tracing for profile scraper - PNEUMATIC ADJUSTMENT SCRAPER - GLUE JOINT SCRAPER - POLISHING UNIT - RELEASE AGENT SPRAY UNIT WORKPIECE - CLEANING AGENT SPRAY UNIT WORKPIECE

Condition: excellent (used), Diosna / Alexanderwerk fork mixer - used - 120 kg dough capacity - refurbished Dksdpfxoyaqkfe Ac Neh - 2 speeds - timer - scraper - bowl guard - technical condition: excellent - collection from warehouse / shipping available - price on request

Condition: excellent (used), HOLZHER sprint 1329 Edgebander Well equipped, possibility to inspect before purchase Automatic NC control from control panel Liquids Pre-milling cutters Glue application, GLU JET system Pneumatic pre-cut guillotine Pressure rollers Ready-cutting saw blades Liquids Top and bottom milling cutters R1-R2 Corner rounding on 2 units Profile scraper R1-R2 Flat scraper Liquids Polisher Documentation Djdpeyankcofx Ac Nokh Max feed speed: 18 m/min Max edging thickness: 8 mm Max edge band thickness in roll: 3 mm Max edging height: 60 mm Machine length: 670 cm, with table: 755 cm Table dimensions: 180 x 60 cm Machine checked, ready for testing

Condition: used, Year of construction: 1997, HolzHer Edge Banding Machine 1436SE Djdowv Uq Ajpfx Ac Njkh Year of manufacture: 1997 - PVC Primus, 3mm PVC cartridge system - Edge banding, flush cutting, flush milling, chamfer milling, radius milling - Scraper, buffing unit - Dimensions: 4700mm x 1400mm; Height: 1650mm - Weight: 1300kg - Working dimensions: Length: 4500mm Depth: 1020mm Height: 1630mm - Connection nozzle: 140mmØ - Minimum workpiece width: 60mm - Feed speed: 11m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8mm for strip material, 2mm for coil material - WITHOUT pre-milling unit

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,135 mm, travel distance Y-axis: 865 mm, travel distance Z-axis: 762 mm, table load: 2,270 kg, overall weight: 17,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,000 W, tool weight: 7,000 g, number of axes: 3, This 3-axis Hurco VMX84i was manufactured in 2015. It features a WinMax control system, a table size of 2185 × 865 mm, and a maximum table load of 2270 kg. The machine offers a travel range of 2135/865/762 mm and a spindle speed up to 12000 RPM. It includes a 40-position automatic tool changer and through-spindle coolant. If you are looking to get high-quality milling capabilities, consider the Hurco VMX84i machine we have for sale. Contact us for more information. • Control: WinMax • Table working surface (W x D): 2185 x 865 mm • Spindle nose to table: 127 – 887 mm • T-slots (DIN 650): 8 slots, 18 mm, 125 mm spacing • Max spindle torque: 239 Nm (SK40) • Rapid traverse (X/Y/Z): 18 / 18 / 13.5 m/min • Automatic tool changer: 40 stations (SK40) • Max tool diameter: 75 mm (SK40) • Max tool length: 300 mm • Through-spindle coolant: yes • Workpiece probing: yes • Tool wear measurement: none • Coolant tank capacity: 867 l • Required floor space (with open doors, control, and chip conveyor): 7574 x 4450 x 3310 mm Dkjdpfjx Stlwsx Ac Noh Additional equipment • Scraper-type chip conveyor (standard) • Workpiece probing system Technical Specification Taper Size SK 40

Condition: new, cutting diameter 410 mm saw band length 5800 x 41 x 1,3 mm table height 750 mm capacity 90 degrees: flat 700 x 410 mm capacity 45 degrees: round 410 mm capacity 45 degrees: flat 500 x 410 mm capacity 45 degrees: round links 410 mm capacity 45 degrees: flat links 430 x 410 mm capacity 30 degrees: round 320 capacity 30 degrees: flat 320 x 410 15 - 150 m/min workpiece weight max. 250 kg/m kg 5,5 kW 3200 kg 4500 x 2800 x 2000 mm - The ergonomic panel control can be networked and offers various options Option packages * Teleservice for remote maintenance * Setting sawing programs in the AV * Import of sawing programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs Available in almost all lengths - Exact positioning of the material using servo positioning technology - Pioneering electric saw feed with ball screw: - highest cutting performance and quality, while being gentle on the saw band - Consistent use of the most modern recirculating ball bearing systems: - smooth-running, highly resilient, low-maintenance and play-free - Unique and patented double miter system: Dkodpfxox Sr Dre Ac Nsh - Material is always clamped at right angles Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 5.5 kW - Hydraulic material full stroke clamping - Automatic movement of the vices - Saw frame height adjustment automatically - Minimum speed and saw band monitoring - Electric miter tilting via servo motor - Visualized program input with CNC control - Integrated MEBA pliers insertion system from 5-2300 mm per stroke with integrated roller conveyor *Special equipment: - Laser light for cutting line display/marking saws - Chip brush driven - Micro dosing system - Clamping pressure regulation - Material bundle tension - Job menu - Material database - Zero stop - Scraper belt conveyor for optimal chip disposal, 2000 mm long - Cutting progress control

Condition: excellent (used), Edgebanding Machine Advantage 4612F - Regularly maintained, year of manufacture 2002 - Total length 6000 mm - Width 1100 mm - Height 1900 mm - Weight 3100 kg - Feed rate: 12 m/min Dksdpfx Acjx Srp Ij Njh - Workpiece dimensions: width 65 mm, max. thickness 45 mm, min. thickness 10 mm, length 150 mm, edge height 55 mm, 7 bar pressure - With two interchangeable glue pots - Pre-milling, flush trimming saw, multifunction unit, profile & surface scraper, buffing - With pre-milling unit

Condition: used, Year of construction: 2025, Number of shares: 7 | Amazone Trailed Reversible Plough Tyrok 400 V 7+0 100 Dsdpfsyaixbox Ac Nekh Equipment: Lower link axle Cat. 3 Hydraulic front furrow width adjustment Hydraulic tractive force booster Wheel 500/60-22.5 Scraper for support wheel Body assembly with hydraulic overload protection Central release pressure adjustment Beam, frame height 80 Manual working depth adjustment Parking stand Plough body STU 40 Mouldboard 430 Plough point HD Disc coulter holder Disc coulter D500 Wear protector LED rear lights for road travel | Internal No.: 11344659

Condition: used, Year of construction: 2009, Manufacturer: Romaco - Frymakoruma Dksdpfx Acjx R D Els Nsh Model: Dinex Lab Year: 2009 Type: Vacuum mixer for R&D or small-scale production Application: liquid and/or viscous (semi-liquid) products = dispersion, homogenization, emulsion, grinding, and pumping of the product Tank: Pressure: -1 / 0 bar Volume: 18 L Temperature: 130°C Jacket: Pressure: 6 bar Volume: 2 L Temperature: 180°C Homogenizer: high-speed agitation 2 modes = Pumping with discharge / Dispersion with high shear force Tool size: 100 mm Rotor: 20 x 4 mm Stator: 30 x 4 mm VEM motor 7.5 kW / 2890 RPM Scraper mixer: slow agitation SEW 0.37 KW motor Sterling SIHI LEMA 25 liquid ring vacuum pump Power 1.1 KW - Max. 16 m³/h. CIP (clean in place) 2 x feed hoppers, 1 of which is connected to the jacket with its piping Air pressure: 6 bar Water pressure: 6 bar Temperature control regulator Single-acting seal: reconditioned by Burgmann Paper documentation Weight: 750 kg

Condition: used, Year of construction: 2008, Manufacturer : VMI Model : R 401 DT Year: 2008 Dkedpfxjx R Dz Hj Ac Neh   Application: mixing and kneading of highly viscous or pasty products Vessel : 2 Volume : 40 Liters Power : 3KW Mixing unit: 1 beater / 1 scraper blade Up and down: hydraulic

Condition: used, Year of construction: 1986, Manufacturer : OLSA Model : Speedycream 750 Year : 1986 Type: vacuum mixer Capacity: 750 Liters Total capacity: 880 Liters Minimum working capacity: 280 Liters Jacketed : 3 bars Inside tank pressure: 1 bar Slow stirring: 5.5 KW Planetary: 15-78 rpm Blade with Teflon scrapers: 5-26 rpm Satellite rapid mixer (located on the lid): 7.5 KW Homogenizing disperser: 1400 - 2800 rpm Movement speed: 5-26 rpm Dsdpjx R Dmisfx Ac Njkh Temperature controller Planetary mixer speed indicator Internal vacuum indicator Planetary mixer power consumption indicator Fast stirrer power consumption indicator Planetary speed indicator Satellite speed selector Tilting axis Vacuum pump : 1,45 KW Drain valve Ø 65 mm Exterior dimensions: 2658 mm x 1420 mm x 2510 mm (3870 mm - lid open) Spare parts available (see photos) Original paper documentation available Video available in running condition

Condition: used, Year of construction: 2007, Manufacturer : - Year : 2007 Type: Melter with heating elements - immersion heaters Volume : 35 L Anchor blade stirring with Teflon scrapers Tank lid Variable speed drive: mechanical and manual Jacketed : Yes Immersion heaters: 2 Workshop test temperature: 80°C Dkjdox R Dlxepfx Ac Neh Recirculation pump for jacket Electrical cabinet Video available in running condition

Condition: used, Year of construction: 1998, Manufacturer : VMI Rayneri Model Trimix (TXR) 10 litres Year : 1998 Type : Vacuum mixer Application : Dispersion, dissolution, homogenisation, deaeration, heat exchange > gels, creams, pomades, …   Total volume : 10 Litres Empty weight : 300 kg Power : 3.5 KW Power supply: 230 V Pressure : 2 bars Temperature : 120°C Jacket + insulation Mixing : – Anchor blade with scrapers: 0 – 60 rpm – Counter agitation: 0 – 180 rpm – Dispersion/emulsion turbine: 200 – 3000 rpm   Sold with water temperature controller : Manufacturer : SOLEV Model : RE 50-3-SC-R-20-2D Year : 1998 Heating capacity : 3 KW Dedpfx Aex R Di Djc Njkh   Documentation available

Year of construction: 2022, condition: used, Manufacturer : Buhler Haas-Mondomix B.V. Model: HAKA type VA-15L Year : 2022 Type : Foam / Aerator mixer Previous application : Application : Whipped cream Production capacity : 100 kg/hr nominal Input density : 1,0 kg/l Output density: 0.6 – 0.8 kg/l   Near as new condition. Unit consisting of : – Pre-mixer PCM 400 litres Capacity: 400 litres Design: conical bottom Lid with hinged access for manual loading of ingredients Jacketed, insulated and protected tank Stirrer: cutting blade + Teflon scrapers PT100 temperature sensor – HALA type dispensing pump with frequency converter Volumetric pump with frequency converter Jacketed design Mass flow meter with regulator – HAKA VA-15L type continuous aerator Rotor / stator with 912×5 mm square lugs Effective volume 2 ltrs Mixing head stator Double-walled front and rear plate for cooling Rotor designed for cooling Temperature sensors Jacketed piping 7.5 kW direct drive motor, frequency converter controlled Air injection: manual or automatic with mass flow meter Automatic pressure control and regulation Cabinet + PLC, Siemens S7 type – HANB cold water production unit Autonomous chilled water unit (thermoregulation) for cooling the expansion head tank Dodpfxex R A Rte Ac Nskh Water temperature between 5°C-20°C Spiral heat exchanger / Centrifugal pump / Closed water tank – CIP Easy Clean system for easy cleaning Stainless steel platform supporting all equipment

Condition: used, Year of construction: 1985, Manufacturer : Dumek Model: – Year : 1985 Type: Vacuum mixer / Homogenizer Total volume: 80 L Useful volume: approx. 50 L Slow agitation : Stirring / counter-stirring Rapid agitation : rotor / stator 3.3 KW Up/down: mechanical Dodpfxox R Awao Ac Nekh Tilting: manual Jacketed with integrated heating unit Immersion heaters (new): 2 x 3000 W Regulation: mechanical Tank bottom sample Vacuum pump New scrapers are required; these items can be quoted separately.