Used Scm Si 16 Wa for sale (577)

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: AB141760, cutting width (max.): 1,500 mm, cutting width at rip fence: 1,500 mm, power: 7.5 kW (10.20 HP), sliding table length: 3,200 mm, Equipment: scorer, SCM sliding table saw, model SI 400 E Connected load 380V Main motor 7,5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Table extension 840 x 320 mm Parallelogram guard with wide and narrow hood Laodpfx Astwp Epsffek Scoring unit manual adjustment electric height adjustment electric swivel with siko display Suction connection 1x100mm 1x120mm

Condition: new, Basic equipment and accessories10-year guarantee on the guide system of the saw carriage- Saw carriage with anodized aluminum profile guide made of hardened,ground and flanged steel guides- Saw carriage length 3200mm- "READY" electronic control, 2-axis control (3rd axis onrequest) with:- Height adjustment and inclination of the saw unit (control of therip fence on request)- Management of the tool data with automatic correction of theCutting height in relation to the angle of inclination of the saw blade- Manual, semi-automatic and automatic mode with 99storable work programs- Additional functions: calculator and hour meter- Trimming frame for quick positioning of the stopmiter cuts- Table extensions in the outlet- Cutting length at the rip fence 1270 mm- 2-axis control with 99 programsMotor 7kW 50Hz (8kW 60Hz)- Motor with direct connection with push buttons- Three main saw blade speeds- Scoring unit with independent motorization, externally adjustable andStops for easy saw blade positioningSecurity/Protection- Emergency stop button on the front- Emergency stop button on the side near the rip fence (Version CE)- Thermal protection switch- Saw blade swing protection (version CE) integrated suction, suction nozzlewith a diameter of 80 mm- Saw blade swing protection with integrated suction, suction nozzle with 80 mmdiameter- Automatic motor brake on the main saw blade (CE version)- Lockable main switch- 110 V auxiliary circuit- CE Declaration of Conformity (CE version)Technical specificationsMax cutting height at 90° (mm) 140 with blade 400Max cutting height at 45° (mm) 97 with blade 400Saw blade tilt (degrees) 45Programmed lifting and swiveling of the saw blade unitSaw blade speed (rpm) 3000- 4000- 5000Scorer speed (rpm) 8500Main engine power (S6 -40%) kW (hp) 50 Hz 7 (9.5)Scoring unit power (S6 -40%) kW (HP) 50 Hz 1.3 (1.7)Format cuts:- with trolley 1600 (mm) n.a.- with trolley 3200 (mm) 3200x3200Cutting width for parallel cuts (mm) 1270Suction nozzle diameter:- on frame (mm) 120- on the saw blade guard (mm) 80- on the riving knife (mm) n.a.Net weight base machine (kg) 1050109999 Execution according to safety regulationsR10078 nova si 400ep CE version930731 volts 400 EU931201 Frequency 50 Hz570343 Digital readout for rip fenceComplete with:- Digital display and magnetic tape570133 Motor 9kW 50Hz (11kW 60Hz) with automatic star/delta switch kW9 HP12 Hz50 (kW11 HP15 Hz60)083202 base109993 MACHINE LANGUAGE: German Lajdjvxr Skopfx Affsk

Condition: used, Technical data: Max. saw blade diameter: 400 mm Min. saw blade diameter: 250 mm Saw spindle diameter: 30 mm Laedpfx Aoxzq U Sjffek Scoring unit Manual saw blade height adjustment Tilting saw blade from 0° to 45° Manual saw blade tilt adjustment Sliding table length: 3300 mm Worktable: 1200x700 mm Table height: 840 mm Table extensions: 510 mm Extraction nozzle diameter: 110 mm Fence: 900 mm Ruler length: 2200 mm Power supply: 400 V Main motor power: 4 kW Overall dimensions: Length: 3300 mm Width: 3500 mm Height: 845 mm

Condition: excellent (used), SCM SI12B Circular Saw Lajdpfx Afox I E Nmjfok Cutting width on the right: 700 mm Maximum cutting height: 100 mm with 300 mm blade Manual adjustment of saw blade tilt angle up to 45° Manual lifting and lowering of the saw blade Main motor power: 2.2 kW

Condition: used, Year of construction: 2007, Spindle tiltable: Yes, -45 to +45° Height adjustment: electric / position control Tilting adjustment: electric / position control Fence adjustment: electric / position control Height display: digital Tilting angle display: digital Fence position display: digital Spindle diameter: 30 mm, 40 mm, collet chuck for shank cutters Speeds: stepless variable Motor power: 7.5 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Lodpfxsx I Aiwe Affeak Machine length: 2600 mm Machine depth: 1400 mm Weight: 1100 kg

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm cutting width 3.200 mm Lajdpfxjhvan Io Affok cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg INVERTER NEW Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cutting length (max.): 3,800 mm, saw blade diameter: 380 mm, cutting height (max.): 90 mm, cutting width (max.): 3,800 mm, main saw diameter: 380 mm, overall weight: 4,400 kg, Beamsaw SIGMA IMPACT 90 (SCM Group) suitable for furniture panels precize cutting by one or more panels overlapped. Manufacturer: SCM Group Model: Sigma Impact 90 Production year: 2017 Cutting width: 3.800 mm Cutting depth: 3.200 mm Max. cutting height: 90 mm Front tables (air cushion): 1x 2.500x600mm, 3x 2.500x600mm Machine basement with air-cushion. Max. main blade diameter: 380 mm Scorer diameter: max. 300 mm PUSHER: brushless motor, max. speed 120 m/min ! SAW CARRIAGE: brushless motor, max. speed 150 m/min ! THK linear guides for the saw carriage movement. THK linear guides for the PUSHER movement. Automatic centralized lubrication of THK linear guides. Hi-Tronic kit: - main motor 15 kW (mode S6) - vertical movement of main and scoring blade by price ball-screws - optimized stroke of the main blade - electronic scorer adjustment in 2 axis (vertical, horizontal) - grooving with the main blade (electronic depth adjustment) - postforming cuts - window cut outs (blind cuts) - AKE flange for main and scoring blade Quantity of clamps (grippers): 10 pcs (maximum) Automatic exclusion of the clamp acting on the panels edge (up to 800 mm width). Start/stop pedal. Label printer. Control SW: WINCUT Optimalisation program: OTTIMO PERFECT CUT TOP (1x HW key) Control PC Eye-S: Windows + LCD touch screen 21" Air conditioning device for the electric box. Panel´s dimension automatic measuring. Laser line for the visualisation of the cutting line. Automatic double side aligner - motorized (60-2.200 mm). Lodpfx Afsx Nc Ayjfsak Machine stat: fully working Possibility to see in actuall production. Availability: cca April 2026

Condition: excellent (used), SCM Sintex four-sided planer. Laedpfxjx E R Hxo Affjk

Condition: used, Year of construction: 2008, Dimensions (LxBxH): 196 x 125 x 14 cm Four-sided planer SCM Sintex NT Year 2008 380V 4 spindles Ljdpfxswng U Ro Affeak Spindle bottom/top 7.5kW Spindle left/right 7.5kW Min/max working height 6-105mm Min/max working width 23-180mm Minimum workpiece length 300mm Throughput speed 6-12 m/min Input table 2300mm Spindle diameter 35mm Total dimensions 3400x980x1600mm (LxWxH), weight 1000kg - Year: 2008 - Documentation available: No - CE certificate present: No - Transport dimensions: 1960mm x 1250mm x 140mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: AE/21582, Operating voltage: 400 V/50 Hz Rated current: 44 A Weight: 4800 kg Year of manufacture: 2001 Panel cutting saw from SCM manufacturer, made for industrial applications Robust design for high productivity and precision Laodpfx Afot Dva Sofok Cutting height/saw top allowance: 115 mm Max panel width: 3200 mm Panel max length: 3200 mm Number of grippers: currently 6 Loading: front

Condition: excellent (used), Year of construction: 2018, SCM Línvicilbe SI3 Panel Saw Laedpjx Dbi Esfx Affsk Type: SI 3 Year of manufacture: 2018 Control: 3-axis Length of aluminium table: 3,200 mm Cutting width right of the saw blade: 1,500 mm Motor power: 7 kW (minimum) Scoring unit Saw blade diameter: 400 mm Maximum cutting height: 140 mm Touchscreen with operation for: Automatic height adjustment Automatic tilt adjustment Automatic parallel fence

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) Laodpor A Eq Rofx Affek L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: new, Year of construction: 2025, FS 41 classic Tersa - Thicknessing planer with TERSA quick-change system for planing knives With TERSA cutterblock for changing planing knives in seconds TERSA planing knife system enables particularly quiet running Ljdscnxayspfx Affeak Skew toothed steel infeed roller for constant and uniform wood infeed The extra long dressing tables made of one piece allow easy dressing of the workpieces Large dressing fence can remain in position when opening the dressing tables Rear opening dressing tables The high machine weight ensures highest precision and smooth running Powerful industrial motor Robust steel/cast iron construction Model FS 41 Classic Tersa Article-No. 5503414 Technical data ---Technical data dressing tables--- Total length of the tables 1800 mm Feeding table length 920 mm table height 870 mm working width 410 mm max. chip removal 4 mm ---Technical data thickness--- dimensions thickness table 605 x 420 mm min./max. working height 3 / 230 mm feed speed 7 m/min. planing shaft-Ø / planing knives 72 mm / 3 pcs. speed 5200 1/min motor 400V/50Hz/S6 40% 5,0 kW (6,6 PS) Suction nozzle diameter 2 x 120 mm Weight 270 kg Tersa planing cutter No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Planing mills solid backstops prevent the backstroke of workpieces 3-blade shaft Tersa for optimal planing pattern The wood infeed helical toothed steel infeed rollers for an

Condition: excellent (used), Four-sided planer scm sintex nte Planing width max 180 mm Planing height max 105 mm 4 spindles Bottom + top 7.5 kw Right + left 7.5 kw Electric height and width adjustments Lodsvzr Drjpfx Affoak Worktop lubrication pump Headset Spindle speed 6000 rpm Spindle bore diameter 35 mm Weight 900 kg European CE certificate Technical documentation Very good condition

Condition: used, Four-sided planer SCM Sintex 380V 4 spindles Spindle below / above 7.5kW Spindle left/right 7.5kW Max working height 105mm Lsdpfxewng Iwe Affoak Max working width 180mm Input table 2300mm Spindle diameter 40mm Total dimensions 3400x980x1600mm (LxWxH), weight 925kg - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: AE/024990, Operating voltage: 400V, 43A, 50 Hz Cutting dimension: 3200x2100 Saw projection: 105 mm Saw carriage speed: 0 - 60 m/min Lasdet Dvalopfx Affok Gripper speed: 38 m/min Saw carriage speed: 6300 rpm Grippers: 6 Saw drive: 7.5kW Undercutter: 1.5kW Saw size: 380mm

Condition: used, Four-sided planer moulder SCM Sintex NTE Electronic four-side planing and profiling machine Planing width: 180 mm Planing height: 105 mm 4 spindles Spindle motor 1 + 4: 7.5 kW Spindle motor 2 + 3: 7.5 kW Spindle diameter: 35 mm Long infeed table approx. 2300 mm Spindle speed: 6000 rpm Feed speed: 6/12 m/min Electric height and width adjustment Lsdpjxqf Dyofx Affsak Lubrication pump incl. planing tools Machine WORKSHOP TESTED and in VERY GOOD CONDITION Available ex stock Lieboch / LEASING POSSIBLE

Condition: good (used), functionality: fully functional, SPINDLE MOULDER with tilting spindle model SCM T160 L’Invincibile second hand machine spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 Lajdpevzghrefx Affok volt. 380/50 weight kg. 1000

Condition: as good as new (ex-display), Year of construction: 2025, ST 3 classic F 23 - Combined sawing-routing machine With tiltable saw blade, tiltable milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast iron table High-precision format sliding carriage made of anodized aluminum (travel 2250 mm) Large extension arm (900 x 600 mm) with telescopic aluminum stop Max. Saw blade Ø 315 mm with scoring device, swiveling from 90°-45°. Saw parallel fence with fine adjustment Stable sawing unit and large dimensioned double cradle frame unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3.500 - 10.000 min-1 With right-left rotation of the milling spindle Standard arc milling protection hood Two 5.0 kW motors with high power reserves Cast iron milling unit top mounted on both sides Laodpfxecnwyds Affek precision ball bearings on top close to the lever point four optimally graduated milling speeds, enabling the grinding of workpieces Powerful motors Industrial motor, 100% duty cycle suitable for continuous use (full load) Scope of delivery: Curved fraise protection hood anodized aluminum format sliding carriage aluminum stop jaws folding stop jaws Technical data Dimensions cast iron worktable 1112 x 430 mm working length 2250 mm max. saw blade Ø with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. cutting width 2660 mm saw blade tilting 90° - 45° cutting width 900 mm speed 4000 1/min. table cutter - spindle tilting 90° - 45 useful length of spindle 100 mm max. tool Ø 210 mm max. tenon tool Ø 275 mm max. tool-Ø retractable 180 mm speeds 3.500/7.000/10.000 1/min. General - motor power 400 V/50 Hz/S6 40% 2 x 5,0 kW ( 6,6 PS) Weight 470 kg Suction nozzle-Ø 2 x 120 mm Suction nozzle-Ø saw blade guard 60 mm Location: Ex stock 54634 Bitburg - immediately available -

Year of construction: 2010, condition: like new (used), I sell the panel beam saw SCM Sigma Prima 67. Year 2010. Cutting size 3300x3200mm. Ledei Evbzepfx Affsak Cutting height 67mm. Max saw blade diameters 320 + 160mm Main motor 7,5kW Scoring motor 1,3kW Total power 10kW Total area covered W.5400mm x D.7000mm 8 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. WinCut optimising software included. Label printing included. Software Ottimo Perfect Cut included. Very good condition. Available immediately.

Condition: ready for operation (used), functionality: fully functional, sliding table length 1500mm Laedpfjxhd Aisx Affek scoring unit fence with angle regulation max blade diameter 300mm spindle diameter 35mm spindle speed 3/4.5/6/8 tys. RPM connection 380V

Condition: good (used), functionality: fully functional, Manual control units with 20 meters cable length Ljdoxg Rn Nspfx Affeak

Year of construction: 2006, condition: ready for operation (used), AUTOMATIC FRONT-LOADING SECCIONADORA AUTOMATIC FRONT-LOADING OF OCCASION Make: SCM Model: SIGMA IMPACT year 2006 Lasdehkr A Sepfx Affjk CE regulation Useful cutting dimensions: 3200 x 3200 mm. Cutting height 67 mm 3 long first air tables and two shorter wide air tables 6 Pneumatic clamps Main saw motor 10 HP Scorer. PC. WINCUT software.

Condition: used, Year of construction: 2011, WINCUT Numerical Control Working dimensions mm 3800 x 3800 Max blade projection (mm) 107 Front panel loading N. 10 pincers on the pusher carriage Lateral aligner Scoring group (max blade diameter / power) 160 / Kw 1,5 Main blade unit (max blade diameter / power) 380 / Kw 7.5 Adjustable speed of the blade carriage (m/min) 1 - 135 Pusher carriage speed 70 m/min N. 3 air curtain front benches TECHNICAL DETAILS TO CHECK WHEN THE MACHINE WILL BE IN OUR WAREHOUSES Laodpowwrywofx Affek

Condition: good (used), functionality: fully functional, SCM manual control units, cable length 20 meters Lsdpfxsxg Rm Sj Affoak