Used Scm Ti for sale (576)

Condition: new, work table dimensions 2500 x 780 mm spindle DM 30 mm tilting of spindle +/- 45,50 usable spindle lenght 140 mm Max. tool DM under table 300 x 80 mm suction DM 1 x 120 & 2 x 100 mm Motor elektrospindel 7,50 kW elektro spindel with inverter for speed 900 to 12.000 RPM control panel with mit "Easy Touch 7" program "Flex"- fence with autom. adjustment via 'Easy Touch 7' left right turning of spindle Iijdpfx Afed Etkhsfek table elongation front INCL. OPTIONS: - "Fast” table with autom. adjustment via 'Easy Touch 7' control - version “LL” with 2 cast iron tables (2500 mm) Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: like new (used), SCM bottom spindle moulder Sliding carriage in the table 120 cm Height and tilt electrically adjustable Spindle fi30 7 kW motor Iiedowt A Iqspfx Affjk 4 spindle speeds Very good condition

Condition: new, Year of construction: 2022, Swivel spindle 0° - 45 Height and swivel adjustment by handwheel Dial gauges in handwheel motor power 7,0 kW 4 speeds 30mm milling spindle Iiedoipv A Tjpfx Affek Aluminum stop jaws Milling fence with crank adjustment Long cast iron tables Safety rulers

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers Iodpocuwptefx Affsik 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), mandrel diameter: 30 mm, Equipment: motor brake, Table milling machine SCM type T130 with four roller feed unit, table size 1200x730mm, max. Speed 10.000/min, spindle D=30mm. Motor 5.5kW A spindle D=40mm can also be supplied at an extra charge. Iedpfx Ajt Rfn Ejffoik

Condition: good (used), Code: 0465 Brand: IDM - SCM GROUP Model: IDIMATIC 49-20 Automatic edge bander for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various Technical data: Min/max gluing height mm 10/50 Min/max edge thickness mm 0,4/20 Min panel width mm 60 Min panel length mm 140 Adjustable feed speed m/min 12/18 Electric press lift Telescopic support for large panels Soundproof cabin Composition: Anti-adhesion unit: spreads anti-adhesive liquid on the upper and lower surfaces of the panel Gluing unit with pre-melting unit Pressure rollers End trimmer unit for front and rear vertical cutting of excess edging - N° 2 motors 0,5 Kw at 12000 rpm - Tool diameter mm 110 Top/bottom trimmer unit with superimposed motors for trimming the upper and lower sides of the excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Top/bottom trimmer and beveller unit for final upper and lower trimming of excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Manual turret device - automatic positioning of the tool post and front copiers according to the different edge band thickness Routing unit makes through holes and non-through holes in the edged side and on the upper and lower parts of the panel and is time controlled Iedsvhc E Hepfx Affeik Cleaning unit for brushing and polishing of the edge bands applied - N° 2 motors 0,18 Kw at 1400 rpm which can be inclined vertically between 0° and 30° Compressed air 7-8 bar Overall dimensions mm 5600 x 1000 x 1500 h Weight kg 2500

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. Isdpod Supgjfx Affjik no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 230 / 1600 (ca.) Numerical Control / Software WinEdge Adjustable feeding speed (m/min ) 10 - 30 Safety and sound-proof enclosures/cabins SIZING PART (for each side): No. 2 Hogging Units (2 x Kw 5,8 ca.) No. 2 Milling units (2 x Kw 4 ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt glue + Multing Unit) Pressure zone (adjustable by CN) Edge coils supporting unit (No. 6 reels) Rough Trimming unit (2 x Kw 1 ca.) Fine Trimming unit 08.055 (2 x Kw 0,5 ca.) 0°-30° No. 5 Milling grooving units (5 x Kw 4 ca.) Profile Scraping unit Iiodpfjl Hydmjx Affok Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit + Hot Air Heater (to reactivate the color of plastic tape)

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Isdpjx A E Tfefx Affsik Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15

Condition: good (used), Year of construction: 1995, functionality: fully functional, planing width: 520 mm, number of planer blades: 4, height adjustment type: electric, Equipment: motor brake, Description SCM FS 520 – Surface planer & thickness planer combination machine | Year of manufacture: 1995 | Good condition For sale is a robust and precise combination machine from SCM: SCM FS 520, built in 1995, ideal for professional workshops and ambitious carpenters/joiners. The machine has been regularly maintained and is in good technical condition. Technical data & features: + Manufacturer / Model: SCM FS 520 + Machine type: Combined surface planer & thickness planer + Year of manufacture: 1995 + Motor power: 5.5 kW (three-phase) + Cutterblock: Centrofix system (quick knife change, precise cut) + Number of knives: 4 Centrofix knives + Planing width: 520 mm + Thicknessing width: 520 mm + Max. planing depth: approx. 5 mm + Thicknessing height: 3 – 250 mm + Feed speed: 6–12 m/min (2-speed) + Surface table length: approx. 2200 mm (infeed & outfeed table) + Pneumatic table opening: Yes – for easy switching between surfacing and thicknessing + Electric height adjustment of thicknessing table with digital readout + Weight: approx. 1000 kg + Extraction port: 120 mm + Voltage: 400 V Condition & maintenance: + Machine from a well-maintained workshop + Centrofix knives in good condition + Tables flat, bearings run smoothly + Immediately ready for use + No known repairs required Iijdpfx Afsx Aibaefsk You will receive an invoice with VAT shown. Shipping via freight forwarder by arrangement possible. Price: +Negotiable €7650 net ex-stock Haldensleben.

Condition: as good as new (ex-display), Year of construction: 2025, Compact wide belt sander with combined sanding unit Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Ijdpfx Afjgf Sw Njfsik Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating

Condition: used, Year of construction: 2011, Working size in X-direction: 2770 mm Working size in Y-direction: 1220 mm Working thickness (Z-dimension): 80 mm Machine design: Gantry-type machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Number of axes: 3 Tool changer: Yes Tool changer positions: 10 Keyboard: Yes Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table type: Matrix table Iedpfx Afsvvi Htefsik Stop system: Stop cylinders Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Safety: Safety tread mats Storage location: Sonnefeld

Condition: excellent (used), CNC Woodworking Center. Ijdewmxkhspfx Affeik

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 14 / 60 Working width (min/max) mm mm 260 (ca.) / 3200 Iiedpfx Afowhi Slofjk Numerical Control /Software MAESTRO PRO EDGE Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5

Condition: used, machine/vehicle number: 007966, Position 1: Panel Feeding and Loading SCM-EVOLUTION C Position 2: Double Sided Squaring/Edgebanding Machines SCM-EVOLUTION C Ijdpfx Afjwu Agpjfoik Position 3: Panel Stacking and Offloading SCM-EVOLUTION C

Condition: used, Year of construction: 1992, The machine is in used but good condition. Iiodpfxoxxn Tmo Affsk The machine runs perfectly. The unit requires fine adjustment. If you have any questions or are interested, feel free to contact us!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AE00000087, Brand and Model: SCM ACTION P Iiodpfexr T N Tsx Affek Year of Manufacture: 2018 Condition: Lightly used, excellent condition Location: Croatia Key Technical Specifications: - Type: Automatic cabinet clamp with “comb” pressing system - Vertical and horizontal automatic clamping - Brushless motors: 2 kW (vertical), 1.5 kW (horizontal) - Positioning speed: up to 160 mm/s - Max pressing force: 1400 kg (vertical), 1600 kg (horizontal) - Working area: up to 2500 mm length, 1300 mm height, 800 mm depth - Installed power: 4 kW / 15 A - Weight: approx. 1800 kg - Machine dimensions: 4200 × 1200 × 2250 mm - Safety: Safety photocells on both sides Functionality: - Manual loading and unloading - Ideal for quick cabinet assembly in kitchens, bathrooms, and offices Price: €16,500 + VAT Notes: - The machine is in excellent working order and was lightly used - Perfect for manufacturers looking to optimize cabinet assembly - Available immediately For more information, pictures or viewing appointment – feel free to contact us.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,550 mm, Used SCM Pratix S 15 - Year: 2012 - Available in January 2026 - 3 axes Iiedpfxjxl D Slo Affjk - Drill head - Videos available

Condition: new, Year of construction: 2025, functionality: fully functional, ACTION M frame press Press for any kind of window system: windows, slatted shutters, shutters and solid wood doors. Max working dimensions L x H 3500x2500 mm Min working dimensions L x H 250x375 mm Max vertical/horizontal thrust 7,4/2 ton Working height 480/1050 mm Hydraulic pump power 2.1 kW MACHINE COMPOSITION: ACTION M ACTION M FRAME PRESS num 1 Iijdpfx Afowh T Dlsfok 109831 Normative CE per SM 1 R00494 action m 35-25 1 930731 Volt 400 EU 1 931201 Frequency 50 Hz 1 530074 PVC-coated beams working surfaces 1 530075 Intermediate manual crossbeam complete of piston and counter-stop 1 530076 Hydraulic system for low pressure working 1 530077 Equipment for trapezoidal products with oscillating head to adapt to the different corners of the windows system 1

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Manufacturer: SCM Model: PRATIX 22 Year of manufacture: 2017 Working area X: 3086 mm Working area Y: 2155 mm Working area Z: 150 mm Number of milling spindles: 1 Main motor: 9.5 kW Max. speed: 24,000 rpm Fixed clamping points for aggregates Tool holder: HSK-F63 Tool magazine positions: 19 Gantry construction Machine with moving gantry Grid table Vacuum pump Two vacuum pumps with a capacity of 250 m³/h each Isdpfow Ahr Tox Affjik Drilling unit

Condition: used, machine/vehicle number: 007691, X axis working area: 2440 mm Ijdpfxou Rigye Affsik Y axis working area: 1220 mm Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: excellent (used), Year of construction: 2000, I sell the window angular centre SCM Multiflex. Moulding heads VIVALDI EU68mm. Iisdohw Dfyjpfx Affsk Cutting + Tenoning spinde right side / Tenoning side. 2 pcs. Profiling spindles + glass strip cutting machine left / Profiling side. Available immediately.

Condition: excellent (used), SCM Multiflex angle centre for single-sided cross and longitudinal machining of window and door corners Iodpfx Afjwmcnwefsik Tensioning spindle length 320mm, max. working range 320mm Feed system with rollers Profiling spindle length 320mm, max. working range

Condition: excellent (used), SCM internships in excellent condition Isdpfx Afst Hkq Rsfjik

Condition: excellent (used), two bottom heads one side - right head heads with 21 spindles spindles span 32mm Iedpow Ad Tgjfx Affeik motors 3x1,1kW 2 pneumatic pressure regulation of span between heads right/left spindles