Used Sandblast for sale (323)

Condition: reconditioned (used), B., VK26M (1974 series) with motorized discharge table: - Main engine - Feeding table ( driven ) - Output table - Control cabinet Pgjdpjfn Iu Ijfx Ahvoi Including infeed and outfeed table, workshop inspected * - debarking capacity: 10cm - 61cm diameter - 4 main decision makers - 4 cutting blades - Rotor speed =235 rpm / min - Rotor öppning=65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( length of wood ) Dimension ( without infeed and outfeed table ) L= 9840mm Entry table: 3540mm x 1000mm x 1900 Main engine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Item 1 1 Content: Disassembly of machinery, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material of blade shafts on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: Piece V-belt for rotor drive Pos 4 1 Gear oil Pos 5 1 Material: Abrasive + Colours Pos 6 4 Valonkone piece peeling knife Pos 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : with 3-phase delta-start for 30 kw main motor with 3-phase delta start for 11 kW geared motor with start for 4 kw gear motor supply with start for 4 kw gear motor output Main Starter Emergency STOP

Year of construction: 1999, condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Fan power 11 Kw Podpfehqd Tvjx Ahvsgi Efficiency up to 8000 m3/h. Vacuum up to 4300 Pa Filtration surface 128 m2

Condition: used, Year of construction: 2010, type of input current: three-phase, filter area: 50 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic and vacuum-type, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2010 The filter is cleaned during operation by compressed air pulses controlled by a microprocessor, ensuring high system efficiency. Low compressed air consumption due to the "Power-Spray" system. The Filtercube central extraction and ventilation unit, equipped with cartridge filters, is the ideal solution for almost any problem involving smoke and dust filtration. The fan is positioned on the clean-air side, reducing explosion risk to a minimum. Applications: - Central extraction system for multiple welding stations - Extraction system for welding robots - Extraction system for thermal cutting and grinding tables - General hall ventilation system (push-pull or displacement system) - Extraction system in combination with extraction tables - Extraction system for grinding non-explosive materials Specifications: Psdpfx Ahow Aw Nnsvjgi - Soundproofed fan housing, power: 4 kW - Capacity: 5,000 m³/h - Negative pressure: 3,000 Pa - Inlet diameter: 315 mm - Filtration surface: 50 m² New filter cartridges tailored to customer specifications available on request. Stock no.: 1047

Condition: good (used), Year of construction: 2007, - Spaleck Feeders . Type: SFLU 1950-300x3000 . Podpfoxwn H Dox Ahvegi L X W: 3.000 x 1.950mm. . Year of Manufacture: 2007 . With 2 Pcs. Friedrich Unbalance motors of 2KW each, Springs and Frame with rubber springs. Feeders can be sandblasted and painted .

Condition: new, functionality: fully functional, mileage: 100 km, power: 88.26 kW (120.00 HP), fuel type: diesel, maximum load weight: 450 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 2,750 mm, gearing type: automatic, emission class: euro6, loading space length: 3,200 mm, loading space width: 2,000 mm, Equipment: air conditioning, central locking, crane, fog lights, NEW – IMMEDIATE DELIVERY Engine: 2,000 cc – 120 HP Automatic transmission Air conditioning Safety Pack II PM 2823 crane with 3 extensions Lifting capacity at 2.50 m – 990 kg Lifting capacity at 7.20 m – 315 kg Pgedpfoxw D Tgox Ahvei MENTA three-way tipper Dimensions: 3200x2000 mm Aluminium side boards TR4, 400 mm high Rear board upper/lower opening Sandblasting, primer, and powder coating Payload: 450 kg 24 months warranty Leasing or financing available

Condition: good (used), functionality: fully functional, “Hein Lehmann TS 4 – 9,5” for Sale Pgedpfx Aeyhnqxshvsi Manufacturer: Hein Lehmann Type: TS 4 – 9,5 Deck size: 4.000 x 950 mm Number of decks: 1 Included: – Frame – Electrical Motor Vibrating screen will be overhauled, sandblasted and painted.

Condition: good (used), “Hein Lehmann Liwell LF 1.0 – 3.15 / 10 ED” for Sale Podoyhndfjpfx Ahvsgi Manufacturer: Hein Lehmann Liwell Type: LF 1.0 – 3.15 / 10 ED Deck size: 1.000 x 3.150 mm Number of decks: 1 Included: – Frame – Top cover – New 7,5KW Siemens electrical motor – New Pulley’s – New V-Belts Vibrating screen can be sandblasted and painted.

Condition: new, functionality: fully functional, Year of construction: 2026, The dust collector for cabin sandblasters is a complete unit equipped with an engine and a filter. Ensures effective removal of dust and dust from the sandblaster, improving visibility and eliminating escaping dust. Perfect for cabins with a large usable area, it ensures hygienic and safe working conditions. Device description The dust absorber intended for cabin sandblasters is a complete solution equipped with an engine and a filter, ensuring effective dust removal. It is ideal for use in various types of large-area booths where sandblasting is carried out. Thanks to its advanced design, the absorber effectively removes dust from the sandblaster, which improves visibility during operation. Dust that previously escaped from the device is now effectively removed, ensuring more hygienic and safe working conditions. The engine integrated with the absorber ensures high dust extraction efficiency. Thanks to this, users can enjoy the effective operation of the absorber, and sand and dust from the sandblaster are effectively collected and retained in the filter. The filter is a key element of the absorber that is responsible for retaining dust. Effectively retains dust particles and prevents them from returning to the cabin air. Thanks to this, employees are protected against inhaling harmful substances and have better air quality around them. The dust absorber intended for cabin sandblasters is not only an effective tool for maintaining cleanliness, but also ensures safe working conditions and improves the efficiency and precision of sandblasting. Pedpfx Ahsrh E Azjvjgi Technical data Extraction power 1100W Performance 3m³/min Power 230V/50Hz Noise level 85dB Inlet diameter 52 mm Handle length 280 mm Guard dimensions (height x diameter) 730 x 260 mm Filter dimensions (height x diameter) 310 x 170 mm Weight 9.5 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it causes minimal pressure loss. Pjdpfxjxrpmze Ahvegi Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Filtration surface: 62 m² The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. In this case, the lifespan of the cartridge filters is increased. Stock number: 0981

Condition: used, Year of construction: 1998, operating hours: 30,559 h, functionality: fully functional, overall weight: 825 kg, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 312 m³/h, operating pressure: 8 bar, pressure (max.): 8.5 bar, noise level: 70 dB, Equipment: documentation/manual, refrigerant dryer, type plate available, ❇️ Atlas Copco GA30 FF Screw Compressor – 30 kW, 8.5 bar, Excellent Maintenance For sale is a used but exceptionally well-maintained industrial screw compressor from the premium manufacturer Atlas Copco, model GA30 FF with integrated refrigeration dryer. The unit was built in 03/1998, has received regular servicing, and was in reliable operation until February 2022. ⸻ ❇️ Technical Data • Model: GA30 FF (with integrated refrigerant dryer) • Year of manufacture: March 1998 • Motor power: 30 kW (approx. 40 HP) • Max. operating pressure: 8.5 bar (factory specification) • Free air delivery (FAD): approx. 5.2 m³/min (≈ 312 m³/h) • Connection: 400 V / 50 Hz / 3~ (5-pin) • Fuse protection: 3 × 63 A Pgsdpoykk Rasfx Ahvji • Operating hours (at last service): 30,559 h • Weight: approx. 800–850 kg ⸻ ❇️ Maintenance & Condition The compressor was last professionally serviced by DF Druckluft-Fachhandel GmbH on 14.02.2022 with the following parts replaced: • Oil plug • Solenoid valve • Intake regulator kit Since then, the unit has not been operated. It was immediately prepared for decommissioning after servicing and is therefore in ready-to-operate condition. The compressor was stored dry and protected indoors. ⸻ ❇️ Features & Equipment • FF model: integrated refrigeration dryer for dry compressed air – ideal for sensitive applications such as spray painting or control air technology • Elektronikon® controller – user-friendly control panel with operating data storage • Sound insulation enclosure (industrial version) • Steel housing – transportable by pallet truck or forklift ⸻ ✅ Ideal for Workshops · Production facilities · Metal and woodworking · Tire services · Sandblasting · and much more ⸻ ❇️ Location & Loading • Location: 71083 Herrenberg (near Stuttgart) • On-site loading assistance available (forklift on site) • Inspection by arrangement is welcome ⸻ ❇️ Price & Contact Price: €3,490 (final price) No VAT will be charged according to §19 UStG. ———— ‼️ Please also check my other listings. It’s worth it! Viewing and collection in 71083 Herrenberg. ⚠️ Shipping (by freight forwarding) or delivery possible at buyer’s expense.

Condition: excellent (used), Year of construction: 2019, operating hours: 9,058 h, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, filter area: 106 m², suction capacity: 7,000 m³/h, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum system suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 6 Pgodpfx Ahsydcygsvsi Year of manufacture: 2019 The unit has 9,000 operating hours. Filtration area: 106 m² Fan power: 7.5 kW Capacity: 7,000 m³/h Inlet diameter: 315 mm Dimensions: Height: 3.38 m Width: 2.10 m x 1.15 m Stock number: 1105

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, working width: 4,800 mm, Descriptive Document of the Machinery “Bendazzoli NBB186/48 CE” Serial No.: 582 Corrugated Cardboard Packaging Production Machine 1. General Description: - Machine name: Printer Slotter - Model: NBB186-48 - Manufacturer: Bendazzoli Costruzioni Meccaniche - Year of Manufacture: 2001 - Year of Mechanical Overhaul: 2025 ° Slotter overhauled to as-new condition ° Partial printing unit overhaul (new anilox cylinder and rubber roller, new compensator, new bearings, new lubrication pump, overhauled ink feed pump) ° Partial feeder overhaul (new feeder wheels, new lubrication pump, main motor completely overhauled by CEAR, new CAM bearing) ° Static unit overhauled to as-new condition Complete sandblasting and repainting of all machine assemblies. - Year of Partial Electrical Overhaul: 2025 Includes replacement of: sensors / push button panels / onboard cabling / solenoid valves / electrical junction boxes for machine groups. 2. Technical Specifications: - Dimensions: Length 4800mm; Cylinder Circumference 1860mm - Speed: Maximum rotation 5,500 cycles/hour under optimal conditions - Minimum shaft center distance: 450mm - Sound pressure level (feeding area): 85dB (A) - Sound pressure level (delivery area): 82dB (A) - Electrical characteristics: Supply 400Vac Three-phase 3P+PE Nominal Power: 70KW Power Consumption: 57KW Nominal Current: 102A Operating Current: 82A - Production speed: approximately 5,000 boxes/hour in sync mode, approximately 2,500 boxes/hour in extended mode 3. Main Components: - Cronofit Feeder Table Group with automatic positioning of side guides and bundle support gate. - Printing Unit Group with automatic print presetting - Slotter Unit Group with extending and automatic presetting (knife heads) and carton height adjustment - Static Unit Group 4. Safety: - The machine is fitted with protective guards on all moving parts, equipped with sensors to detect guard opening. - Each machine group is provided with an emergency stop mushroom button and a rope pull switch to instantly halt group movements. 5. Electrical Equipment: - Main electrical cabinet housing all control and power distribution components - Operator control desk/console complete with touch screen panel 6. Components not included, for possible installation: - Cable tray and optional accessories - Command and power cables between cabinet/console/machine assemblies - Network bus cables Pedpfxjyifdvo Ahvogi -Price Negotiable Note: Possibility to purchase a Die-Cutter and Stacker (year 2008, requires overhaul)

Year of construction: 2016, condition: ready for operation (used), A Zionair sandblasting cabin is available. Cabin volume: 420l, internal dimensions X/Y/Z: 1200mm/600mm/580mm, max. workpiece weight: 40kg. Machine dimensions X/Y/Z: approx. 1300mm/950mm/1700mm, weight: approx. 125kg. An on site inspection is possible. Pgodsxxzhqspfx Ahvei

Year of construction: 1999, condition: ready for operation (used), Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible. Pedpsw Duvhsfx Ahvegi

Condition: good (used), 37 Machine Tools • Years of manufacture 1970–2000 • Well-maintained condition For sale is an extensive selection of machines from a locksmith’s workshop or metalworking company, specializing in special-purpose machine construction. The total lot includes over 40 predominantly conventional machine tools, solid industrial quality, all well maintained and in full working order. Many machines have been repainted in red/blue for company identification, but are technically in good original condition. The package includes, among others: CNC Vertical Machining Center Alzmetall BAZ 15 CNC Universal Milling Machine Wemas WM3 Universal Milling Machine Deckel FP3A Guillotine Shear BRZESKA FABRYKA 2000/3 Mini Excavator / Multi-purpose device “BOBCAT” FAI 336 Two Band Saws Mössner Rekord (large and small) Cold Circular Saw Kaltenbach Mitre Saw with Table K180 Surface Grinders ABA and ST 30/50 Cylindrical Grinder MSO EDM Machine AEG-Elotherm Elbomat 400 Eccentric Press Helmerding TP8 Hydraulic Press FMA Pokorny 60080-01-5 Spindle Press 10 t Grinder Knuth Belt & Disk Sander 102800 Sandblasting Unit Tremor S.A. Vevey Column Jib Crane 500 kg Four Welding Machines TransMIG 400 Pillar Drill Siegfried Franzen Jungheinrich Pallet Stackers (electric high-lift truck) And numerous other machines, workshop equipment, and accessories. Condition: Consistently well-maintained workshop equipment, all machines functionally tested Some machines repainted in company colors (red/blue) Sturdy machines of high-quality German and European manufacture Terms & Logistics Purchase of individual items possible; removal to be handled by the buyer Ideally sold as a complete lot, available immediately, For full lot purchase, we can arrange transport and loading logistics. Viewing by appointment possible Interested? A complete machine list, technical data, photos, and pricing available on request. If you have questions or would like to arrange a viewing, please contact us. Pgsdpfx Aoxx Tl Ishvei

Condition: used, maximum load weight: 13,443 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 01/2006, loading space length: 7,350 mm, loading space width: 2,500 mm, loading space height: 2,550 mm, Year of construction: 2006, Equipment: tail-lift, Information in English: GROENEWEGEN TRAILER – FULLY INSULATED VEDECAR BOX, LIKE NEW Box body: Fully insulated isothermal VEDECAR box Chassis make and type: Groenewegen DRA-10-10-2 Cooling unit: None First registration: MOT (APK): 07 ? 2025 Internal dimensions (L x W x H): 735 x 250 x 255 cm Unladen weight: 6,560 kg Payload: 13,440 kg Gross vehicle weight (GVW): 20,000 kg Suspension: Air suspension Axles: BPW axles with disc brakes Tyre size: 275/70 R22.5 Tyre tread axle 1: Left 90% / Right 90% (Michelin) Pgsdpfx Aoxx E Tqehvoi Tyre tread axle 2: Left 90% / Right 90% (Michelin) Additional features: - Fully repainted and sandblasted in 2029 - ABS - BPW axles with disc brakes - 2 toolboxes - Fully insulated VEDECAR box body - Dhollandia tail lift 2,000 kg load capacity - Complete service history available - Immediately available and ready for use - Absolutely rust-free, like new Further details: * Curb weight: 6,560 kg * First axle: Michelin, tyre size 275/70 R22.5, left external 90%, left internal 90%, right external 90%, right internal 90% * Second axle: Michelin, tyre size 275/70 R22.5, left external 90%, left internal 90%, right external 90%, right internal 90% * Tail lift: Manufacturer DHOLLANDIA, load capacity 2,000 kg * Axle 1: Position – Front, Brand – Other, Brake type – Disc brakes, Suspension – Air suspension, Twin tyres – Yes * Axle 2: Position – Rear, Brand – Other, Brake type – Disc brakes, Suspension – Air suspension, Twin tyres – Yes Further equipment: * Homepage * Steering axle * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Please inform yourself in advance about export costs and procedures for your respective country. Location: Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to prior sale, changes, and errors.

Year of construction: 2004, condition: used, Tank & Environmental Protection Wozniack Psdpfx Aec Nkr Nehvegi Dear Sir or Madam, we offer a 25.000 liters double-walled storage tank diesel tank ===== Nominal capacity : 25 cbm piece : 1 used : but generally overhauled, that means the tank is cleaned, sandblasted, primed and painted color equipment : lacquer RAL ; . However, you can always bring your own color requirements. Material : steel in steel, material S235JRG2 Documents : Manufacturer certificate/test certificate according to DIN 6616 D/2 and nameplate Piece : 1 dipstick Piece : 1 venting spigot Piece : 1 filling nozzle Piece : 1 new limit switch Piece : 1 new leak detector with filled up leak liquid Piece : 1 ladder Piece : 1 suction line Shape : cylindrical storage tank with feet/console tank dimensions : length -approx. 8390 mm diameter -approx. 2.000 mm weight -approx. 4.500 kg Storage : above ground Compact diesel dispenser Piusi 70 Ltr min . Pump 230 Volt max 55 Ltr/min. on request also in 70Liter min . Of course you can also design your tank system! We will gladly implement your color and equipment wishes according to our possibilities. All our plants are extensively controlled and checked in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises. We also buy existing tank facilities at any time. A trade-in of existing plants is possible. With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 2000, condition: used, Tank & Environmental Protection Wozniack Dear ladies and gentlemen, we offer : 5.000 liters double-walled storage tank Nominal capacity : 5 cbm piece : 1 Used : but generally overhauled, which means that the tank is cleaned, sandblasted, primed and painted color equipment : lacquer RAL ; . However, you can always bring your own color requirements. Material : steel in steel, material S235JRG2 Documents : Manufacturer certificate/test certificate according to DIN 6616 D/2 and nameplate Piece : 1 dipstick Piece : 1 venting spigot Piece : 1 filling nozzle Piece : 1 new limit switch Piece : 1 new leak detection sight with filled up leak liquid Piece : 1 ladder Piece : 1 suction line Shape : cylindrical storage tank with feet/console tank dimensions : length -approx. 2710 mm diameter -approx. 1.600 mm weight -approx. 1.500 kg Storage : above ground Compact diesel dispenser Piusi 56 Pump 230 Volt max 55 Ltr/min. on request also in 70Liter min. ===== Of course you can also design your tank system! We will gladly implement your color and equipment wishes according to our possibilities. All our plants are extensively controlled and checked in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises. Pgsdpfx Ahjc Nkrpovei Could we convince you of our offer? If you have any questions or requests, just give us a call. One of our experienced employees will be happy to advise you. We also buy existing tank installations at any time. A trade-in of existing plants is possible. With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 1999, condition: used, machine/vehicle number: DK25P, Dear Sir or Madam, we offer : _____ Pjdpfx Ascl Sfbjhvsgi 20.000 liters double-walled storage tank ===== Nominal capacity : 20 cbm piece : 1 Used : but generally overhauled, i.e. the tank is cleaned, sandblasted, primed and painted Color equipment : lacquer RAL ; . However, you can always bring your own color requirements. Material : steel in steel, material S235JRG2 Documents : Manufacturer certificate/test certificate according to DIN 6616 D/2 and nameplate Piece : 1 dipstick Piece : 1 venting spigot Piece : 1 filling nozzle Piece : 1 new limit switch Piece : 1 new leak detector with filled up leak liquid Piece : 1 ladder Piece : 1 suction line Shape : cylindrical storage tank with feet/console tank mass : length -approx. 6.400 mm diameter -approx. 2.000 mm weight -approx. 4.500 kg Storage : above ground Compact diesel dispenser Pump 230 Volt ca 70Liter min. ===== Of course you can also design your tank system! We will gladly implement your color and equipment wishes according to our possibilities. All our plants are extensively controlled and checked in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises. Could we convince you of our offer? If you have any questions or requests, just give us a call, one of our experienced employees will be happy to advise you. We also buy existing tank installations at any time. A trade-in of existing plants is possible. With kind regards from Warstein Tank Environmental Protection Wozniack

Year of construction: 2001, condition: used, Tank & Environmental Protection Wozniack Dear Sir or Madam, we offer : _____ 7.000 liters double-walled storage tank ===== Nominal capacity :7 cbm piece : 1 used : but generally overhauled, that means the tank is cleaned, sandblasted, primed and painted Color equipment : lacquer RAL ; . However, you can always bring your own color requirements. Material : Steel in steel, material S235JRG2 Documents : Manufacturer certificate/test certificate according to DIN 6616 D/2 and nameplate Piece : 1 dipstick Piece : 1 venting spigot Piece : 1 filling nozzle Piece : 1 new limit switch Piece : 1 new leak detector with filled up leak liquid Piece : 1 ladder Piece : 1 suction line Shape : cylindrical storage tank with feet/console tank dimensions : length -approx. 3710 mm diameter -approx. 1.600 mm weight -approx. 3.000 kg Storage : above ground Compact diesel dispenser AF 3060 Pump 230 volt max 55 Ltr/min. on request also in 70Liter min. Of course you can also design your tank system! We will gladly implement your color and equipment wishes according to our possibilities. All our plants are extensively controlled and checked in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises. We also buy existing tank facilities at any time. Psdpfx Aocmcm Nshvjgi A trade-in of existing plants is possible. With kind regards from Warstein Tank environmental protection Wozniack

Condition: used, Year of construction: 2017, overall weight: 512 kg, total width: 1,400 mm, total length: 1,400 mm, total height: 2,660 mm, type of input current: three-phase, negative pressure: 4,600 Pa, filter area: 14 m², suction capacity: 2,655 m³/h, Dust extraction unit, RINGLER/Karcher Group brand, self-cleaning vacuum filter, extractor and dedusting system designed for efficient extraction of graphite, metallic, mineral dusts, hard fibers, flammable, hazardous, toxic substances, and for process dust collection during sandblasting, soda blasting, grinding, polishing, and all types of dry dust. The vacuum fan is positioned after the filter on the clean air side, minimizing the risk of explosion. Brand: Ringler / Karcher Group Model: RE201 D5.5 IE3 Pocket filter cartridge – multi-pocket Fan power: 5.5 kW Capacity: 2655 m3/h Vacuum: 4600 Pa Filter surface: 14 m2 Inlet diameter: 180 mm / 125 mm Electromotorized filter cleaning Device in very good condition. Psdpexn Rgusfx Ahvogi Warehouse No.: 1051

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure jetting unit, high-pressure inbuilt cleaner mounted on a hot-dip galvanized and painted high-grade steel frame with forklift sleeves, suitable for installation in commercial vehicles. Similar to PTC Salmon but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo, etc. The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank (LxWxH): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (LxWxH): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (LxWxH): approx. 1,670 x 1,250 x 1,200 mm Dry weight without water tank: approx. 300 kg Dry weight with 400 l water tank: approx. 320 kg Dry weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW ENGINE: - Manufacturer: Vanguard - Model: 35 HP - Fuel: Petrol - Max. Power: 35 HP (26 kW) CONTROL PANEL: - Start button - Operating hours counter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low oil pressure - LED indicator for clogged air filter - LED indicator for RPM - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROLS: - Hydraulic hose reel wind/unwind - Bypass On/Off - Speed control +/- - Emergency stop button - Switch to radio remote control INSTALLED ALARM: - Water shortage safety system to prevent the high-pressure pump from running dry with automatic shutoff. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½” and 80 m 3/8" high-pressure hose - Hose: 80 m ½” high-pressure hose (included) - Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: Manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾” low-pressure hose - Hose: 35 m ¾” low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration grade: 50 mesh INCLUDED IN DELIVERY: - Multifunctional IMET radio remote control; - Engine On/Off; - Bypass On/Off; - Speed control +/-; - Hydraulic hose reel wind/unwind; - Emergency stop button; - Battery charger for remote control; - 300, 400, 500, or 800 l polyethylene water tank (with steel frame); OPTIONS ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½” high-pressure hose; - 50, 60, or 80 m 3/8” high-pressure hose with G3/4” connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to a hydrant; - UNI 45 kit; - Version with 2 high-pressure reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit with swivel joint and quick coupling; - High-pressure lance kit with fan nozzle 15° / rotating nozzle; - High-flow lance kit; Pgjdpfxsf Arugo Ahvoi - Rotating nozzle kit; - Twin-head nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Step cleaning device; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; - Further accessories upon request

Condition: new, Year of construction: 2026, functionality: fully functional, ### Double Workstations for Maximum Industrial Efficiency The NANXING ND712DTL is a high-performance industrial solution designed for six-sided drilling of wood-based panels. By integrating two independent workstations into a single compact footprint, this machine effectively doubles production efficiency while minimizing the required floor space. It is the ideal choice for high-volume furniture manufacturers looking for speed, precision, and reliability. ###Key Advantages & Technologies Dual Station Productivity: Features two independent workstations ( mm) with separate industrial computers and processing units, allowing for the simultaneous processing of two panels. Comprehensive 6-Sided Processing: Capable of drilling and routing on all six sides of a panel in a single cycle, eliminating manual handling errors. High-Rigidity Structure: The integrated machine body undergoes stress-relief tempering, vibration aging, and sandblasting to ensure long-term operational stability and precision. Advanced Control System: Powered by the SYNTEC CNC system and operating on Windows 10, delivering a processing speed that is 20%-25% faster than standard systems. Precision Engineering: The monolithic frame is manufactured in a single process using Japanese SNK equipment to guarantee high-precision alignment. ### Technical Specifications Panel Dimensions Length: 250 - 2,800 mm; Width: 250 - 650/1200 mm; Thickness: 10 - 60 mm | | Drilling Configuration | Top: 4 units (194 vertical); Bottom: 2 units (92 vertical) | | Main Spindles | 2 x 5.5 kW (ER25) + 2 x 3.5 kW (ISO30), max 18,000 rpm | | Max Travel Speed | X/U Axes: 135 m/min; Y Axis: 75 m/min; Z Axis: 30 m/min | | Tool Magazine | 8+8 position automatic tool changer for top electromandrels | | Total Power / Weight | 52.36 kW / 7,850 kg | ### Standard Features & Smart Functionalities Intelligent Panel Detection: Equipped with X-axis length detectors and Y-axis width compensation to ensure correct panel loading and prevent processing errors. Specialty Hardware Support: Configured with specialized aggregates for Lamello grooves and "invisible" hardware connectors. Pjdpfxeygr T Ue Ahvogi Automatic Scanning: Integrated dual scanners ensure rapid reading of barcodes, even on long panels, to increase workflow automation. Surface Protection: Outfeed tables feature brushes and conveyor belts to protect delicate finished surfaces during movement. Enhanced Safety: A comprehensive safety fence with light barriers and safety doors ensures total operator protection. ### About the Manufacturer NANXING Machinery, established in 1996 and listed on the Shenzhen Stock Exchange, is a global leader in intelligent furniture manufacturing solutions. Known for innovative technology and meticulous quality control, Nanxing machines are certified to international CE standards.

Condition: as good as new (ex-display), Year of construction: 2026, The CE08 series is an electrically powered high pressure cleaner. This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE08-series L/min CE08-200 bar 15 7,5 hp water blaster unit 50Hz CE08-200 bar 15 7,5 hp water blaster unit 60Hz CE08-200 bar 15 7,5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7,5 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 6.0 kW Volt: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Pgedpfxohf Nakj Ahvji Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High-Pressure Cleaning Unit, High-Pressure Jetting Unit, High-Pressure Built-in Jetting System on a hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in commercial vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Whale 30/250 | 30 l/min at 250 bar | Engine: Honda GX630 14.7 kW Whale 36/210 | 36 l/min at 210 bar | Engine: Honda GX630 14.7 kW Whale 43/180 | 43 l/min at 180 bar | Engine: Honda GX630 14.7 kW Whale 55/160 | 55 l/min at 160 bar | Engine: Honda GX690 17.7 kW DIMENSIONS / WEIGHT: Dimensions without water tank (LxWxH): approx. 650 x 1,000 x 1,030 mm Unladen weight without water tank: approx. 250 kg Dimensions & unladen weight with 300 l water tank: approx. 1,160 x 1,000 x 1,030 mm & approx. 280 kg Dimensions & unladen weight with 500 l water tank: approx. 1,260 x 1,000 x 1,030 mm & approx. 300 kg HIGH-PRESSURE PUMP: - Manufacturer: COMET - Model: TW 13022S Premium ENGINE: - Manufacturer: Honda - Model: GX 690 - Fuel: Petrol - Cooling: Air - Cylinders: 2 - Displacement: 688 cm³ - Max. output: 24 hp (17.7 kW) - Max. engine speed: 3,600 rpm TRANSMISSION: Gearbox housing CONTROL PANEL: - Ignition key - Hour meter - Electronic fuel gauge - LED indicator for low oil pressure - Emergency stop button INSTALLED ALARM: - Water shortage protection to prevent high-pressure pump running dry, with automatic shut-off function. SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a manometer. HIGH-PRESSURE HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 60 m ½” high-pressure hose - Hose: 50 m ½” high-pressure hose (included) Pjdpfxjdqmtto Ahvjgi LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 35 m ¾” low-pressure hose - Hose: 35 m ¾” low-pressure hose (included) FUEL TANK: - Capacity: approx. 13 l WATER FILTER: - With washable cartridge and drain valve - Filtration: 50 mesh SCOPE OF DELIVERY: - IMET multifunction radio remote control; - Engine On/Off - Bypass On/Off - Electronic speed control +/- - Emergency stop button - Battery charger for remote control - 300, 400 or 500 l polyethylene water tank OPTIONS ON REQUEST: - 60 m ½” high-pressure hose - Pulsation/booster pump - Second high-pressure hose reel - Electric high-pressure hose reel (requires connection to vehicle battery) ACCESSORIES ON REQUEST: - STORZ kit for hydrant connection - UNI 45 kit - Mobile hot water generator 10 kW – 12 VDC - High-pressure spray gun kit, swivel and quick coupling - High-pressure lance kit with 15° flat jet nozzle / rotary nozzle - High-flow lance kit - Rotary nozzle kit - Twin-head nozzle kit - Water sandblasting lance kit - Detergent dispenser kit - Step cleaning device - Surface cleaner - Sludge suction device (Venturi) - Pipe cleaning nozzles - Further accessories available on request