Used Sandblast for sale (331)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Bodpfxey Urtfe Albewn Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), functionality: fully functional, fuel type: electric, Year of construction: 2005, Ratzinger RC 12 Impact Crusher, Bohringer RC12 + B1000 L15000 Conveyor Crusher completely overhauled Crusher mounted on a hydraulic chassis, very easy to transport. Crusher sandblasted and painted BRAND NEW conveyor L15000 Rotor diameter [mm]: 1100 Bwodpfxey Uh Swe Albon Inlet [mm]: 1220x900 Maximum material inlet [mm]: 600 Crusher electric motor: 132 kW Side conveyor electric motor: 5.5 kW Main conveyor electric motor: 4.5 kW Vibrator electric motor: 7.5 kW Conveyor belt electric motor: L15000: 7.5 kW Gap adjustment [mm]: 0-20 to 0-100 - hydraulic adjustment Capacity [t/h]: 100 to 250 depending on the material and the fraction obtained Crusher equipped with a side conveyor with pre-screening Crusher weight: 31,000 kg Conveyor weight: 1500 kg The crusher is 100% operational and ready for operation. Crusher liners are 90% operational. The crusher has been completely overhauled, with new bearings and a new electrical system. Blow bars rotated

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, COMPLETE PACKAGE: Mobile, transportable compressed air supply station – the entire system is installed in a red steel container (10 ft) and can be transported as a single unit using a crane. Simply connect the three-phase power supply and compressed air line – and it’s ready to go. The interior features a HIGH-QUALITY INDUSTRIAL SYSTEM manufactured in 2025: - SCC screw compressor with frequency inverter (speed-controlled, energy-efficient) - 2000-liter pressure vessel VIG (stands upright, protrudes through the container roof with a weather protection cover) - Complete control system with touch panel and emergency stop button on the outside - Acoustic sound insulation (black foam mats inside) - Permanently installed electric heater in the container (frost protection for year-round operation) - Hose material and compressed air connections for consumers - Crane lifting points on the container roof - Control panel with touch display, emergency stop, status LEDs Originally from the shipyard operations of Strela Shiprepair GmbH. System freshly painted, clean, and ready for use. Assumption of the maintenance contract with Schulze is possible. TECHNICAL DATA: SCREW COMPRESSOR: - Manufacturer: SCC Air Compressors - Control: SCC frequency inverter (speed-controlled) - Type: Screw compressor, stationary in the container - Year of manufacture: 2025, commissioning date: 23.05.2025 - Operating time: approx. 1 year in shipyard operations PRESSURE VESSEL: - Manufacturer: VIG GmbH, Kreuztal - Volume: 2,000 liters - Max. pressure: 11 bar - Test pressure: 15.73 bar - Temperature: -10°C to +50°C - Standard: AD 2000, test mark 1003 - Factory No.: 124585, year of manufacture 2025 CONTAINER: - 10-foot steel container, soundproofed, painted red - External dimensions: approx. 2,991 x 2,438 x 2,591 mm - Crane lifting points on the roof (photo attached showing the shipyard crane) - Three-phase power connection 400 V CEE IDEAL FOR: - Shipyards and shipbuilding companies (mobile compressed air supply for ships) - Sandblasting service providers (mobile complete solution) Bjdezav Ddepfx Albjwn - Industrial companies with changing locations - Automotive/body shops with an external location - Construction companies, scaffolding companies PICKUP: Loading with the shipyard crane directly on-site (container has lifting points on the roof). Transport by low-bed trailer via a forwarding agency. Inspection appointments are available at any time – we will then show you the complete documentation and demonstrate the system in operation.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. Bedpjy U Auyofx Albjwn • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. Bodsy U Autjpfx Albewn • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: used, functionality: fully functional, Year of construction: 1997, load capacity: 13,500 kg, Industrial trailer Bsdpfx Aoy Tgbzolbown Condition: Ready for operation and fully functional Technical condition: Good Description: 2-axle 3-way tipper SCHWARZMÜLLER with aluminium side walls --- Payload 13.5 tons --- Unladen weight 4.5 tons --- Year of manufacture: 1997 --- Drop and foldable walls --- Rear wall opens automatically --- 1st wall aluminium 80 cm, original Schwarzmüller --- Extension walls aluminium 60 cm --- Chassis and underside of platform have been newly sandblasted, primed, and painted --- Dual-circuit air brake system --- Lighting system --- Platform internal dimensions: width 2.42 m, length 5 m --- Tyres approx. 80% --- Austrian documents for registration included

Condition: good (used), functionality: fully functional, “Steinert NES 150 210 E 6119” for Sale Manufacturer: Steinert Type: NES 150 210 E 6119 Belt widthness: 1.500 mm (New belt) With control-unit. Bwsdpjy S Tv Nefx Alben Overhauled, balanced, sandblasted and painted.

Condition: used, filter area: 252 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Filter cleaned with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Parameters: Bjdpfx Aovzy Irelbown Efficiency - 12000 m3/h Filtration area 252 m2 Cartridge filter inserts - 12 pcs. 15 kW engine inlet diameter - 500 mm Dimensions: height - 3.65 m width - 2.10 m depth - 2.10 m fan: 1.75 m x 1.50 m height 1.45 m stock no.: 0948

Condition: new, Year of construction: 2025, We offer a new table blasting machine – high-quality Czech production, made using premium materials. Model – TS 330/1. - Diameter of rotary table – 1000 mm. - Maximum height of blasted part – 550 mm. - Overall machine height – 2750 mm. - 1 blasting wheel – power input – 5.5 kW. - Bucket elevator – power input – 0.75 kW. - Table rotation – power input – 0.75 kW - Total machine power input – 7 kW. We also manufacture table blast machines with table diameter – 1500 mm. Equipment with frequency inverter – regulating the rotation speed of the blasting wheel. A major advantage of the machine is the ability to change the turbine’s rotation direction to right or left. Bsdpfxewt T Uze Albown Blasting equipment comes with CE certification. Further advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, thanks to its design, this table blast machine can be considered highly advanced. (Sandblaster, sand blasting, shot blasting, sandblasting machine, blasting machine, blast cleaner). Blast machine.

Condition: new, mileage: 10 km, power: 110.32 kW (149.99 HP), fuel type: diesel, wheelbase: 3,400 mm, fuel: diesel, fuel tank capacity: 90 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 4, number of seats: 3, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, full service history, non-smoking vehicle, onboard computer, power assisted steering, start-stop system, tachograph, traction control, truck registration, ISUZU M30H 150 HP Permissible gross weight: 7,500 kg Wheelbase: 3,365 mm Standard Equipment • AGR - DPD - SCR • 7-inch multifunction display • Exhaust brake • Electrically adjustable and heated exterior mirrors • Immobilizer • Seat belt warning system • Headlamp washers • Manual air conditioning • Electric parking brake • Air-suspended driver’s seat • Front and rear fog lights • DAB+ radio - Bluetooth • USB charging port • Central locking with remote control • Multifunction steering wheel • Driver and passenger airbags • Power windows • Hill Start Assist (HSA) • Bi-LED headlights and taillights • Headlight range adjustment • Automatic headlights • Warning lights in case the driver's cab is not properly secured against tilting • Two-way adjustable steering wheel • Speed limiter (90 km/h) • Start-stop system • Removable cup holder • Spare wheel ENGINE ISUZU 4JZ1E6N diesel engine, 4 cylinders, 16 valves. Common-rail injection with DENSO i-Art direct injection. Turbocharged with electronically controlled VGS turbocharger, intercooler, and variable exhaust valve timing. DISPLACEMENT: 2,999 cm³; OUTPUT: 110 kW (150 HP) at 2,800 rpm; MAXIMUM TORQUE: 375 Nm at 1,280 – 2,800 rpm. EMISSION CONTROL: EURO VI OBD-E. Safety Package 2 ABS: Anti-lock braking system DWS: Front collision warning system AEBS: Advanced Emergency Braking System ASR: Traction control system AEBS for pedestrians and cyclists: Automatic emergency braking with pedestrian and cyclist detection EBD: Electronic brakeforce distribution FVSN: Following vehicle warning system Intersection warning: Blind spot monitoring when turning EVSC: Electronic stability control DDAW: Driver attention warning system AEBS: Automatic emergency braking system LDWS: Lane departure warning system RM: Reversing camera TSR: Traffic sign recognition MOIS: Motion detecting system BSIS: Blind spot information system TPMS: Tire pressure monitoring system Tanks: 100 l, 14 l AdBlue® TRANSMISSION AND RATIOS: Manual, 6-speed Capacity: 3 persons Axles: 2, rear drive axle with twin tires Brakes: Front and rear: 310 x 42 mm internally ventilated disc brakes with asbestos-free pads. Hydraulic system with brake booster and ABS to EC standards, separate brake circuits on both axles. Drum parking brake on the propeller shaft. Suspension: Front and rear: parabolic springs with integrated rubber stops, double-acting hydraulic telescopic shock absorbers. Bedoy Ucxrjpfx Albewn Front and rear stabilizer bars. Electrical system: 24 V – alternator 90 A – 2 x 90 Ah batteries (F-Space: 2 x 70 Ah) BODY TECHNICAL DATA Hooklift system: 90 cm City System Marrell Length: 3,300 mm Payload: up to 4,000 kg EQUIPMENT Container protection: Internal hydraulics Hydraulic manifold Hydraulic pump Oil tank Wide rollers for container stability Stainless steel hook frame Steel construction sandblasted and epoxy primer coated Marker lights Work platforms Work light 1 pc. Additional headlights Rear lamp cover frame No hidden charges with us: - Transfer costs: 0 - Documents: 0 - COC: 0 - First inspection: 0 Financing or Leasing available FURTHER INFORMATION: Premium Kfz Outlet GmbH Fichtenhöhe 3 02829 Schöpstal OT Ebersbach Germany We are at your service: ONLINE SALES wir sprechen deutsch we speak English говорим по русски mówimy po polsku

Condition: used, first registration: 03/2012, color: grey-black, Year of construction: 2012, gearing type: other, LICENSE PLATE: AH12361 TITLE: ATLAS DROP-DECK TRAILER, SANDBLASTED AND REPAINTED, AIR SUSPENSION Bwedpfxowq Ey Re Albjn REF: 25R02 YEAR: 03/2012 AXLES: 2 WHEELBASE: 4800 mm OVERALL LENGTH: 9.16 m DOMESTIC / EXPORT: Italy PAYLOAD: 16,400 kg - TRAILER: 20,000 kg fully loaded BODY TYPE: demountable (hooklift) BODY BRAND: ATLAS ADR: yes BODYWORK ADAPTABILITY: FROM: 5.00 m + 0.20 m TO: 7.00 m + 0.20 m SUSPENSION: air BRAKES: disc TYRES: 265/70 R19.5 ACCESSORIES - 4 new brake discs - new brake pads - caliper locking with tractor’s supply oil lines - 4 inner calipers (2 per side, operate independently) REFURBISHED: yes INSPECTION VALID UNTIL: 27/01/2026 TYRE CONDITION: 30% front, 40% rear PRICE: €17,500.00 + VAT Subject to errors and/or omissions. Displayed prices do not include VAT. Please contact our sales team for up-to-date pricing and conditions. For more information: Loris: 3484773001 URL: #thespecialistsofhooklift AURORA HOOKLIFT SYSTEMS operates in the sale and purchase of industrial and commercial vehicles, mainly specializing in the waste management sector. Experts in trucks, trailers, and hooklift equipment. A ready-to-deliver fleet of over 50 trucks and more than 150 containers, with and without hooklift cranes. E.&O.E. Given the number of adverts and details listed, Aurora invites you to verify the accuracy of the posted data with our sales staff.

Condition: used, Compact self-cleaning industrial filtration unit designed for the extraction and filtration of dry dusts and fume particles in continuous operation. Suitable for industrial applications such as grinding, sandblasting, welding, laser engraving, and machine processing. Condition: used. Manufacturer: HFILTRATION S.r.l. Model: PC MINI Machine Type: Industrial Cartridge Filter Unit Condition: used Filter Type: Self-cleaning Cartridge Filter Application Area: Dry Dust Filtration Filter Cleaning: Pulse-jet compressed air cleaning Filtration Efficiency: below 5 mg/Nm³ Cartridge System: BGIA-certified filter cartridge Cartridge Height: 600 mm Dust Collection Container: 15 liters Compressed Air Connection: 3/4" F GAS Required Compressed Air Pressure: 5 to 6 bar Maximum Compressed Air Pressure: 6 bar Bwedpfx Aljy Sbrxsbjn Compressed Air Consumption: approx. 40 Nm³/h Electrical Configuration: with fan and motor protection switch Motor Protection: magnetothermal circuit breaker Voltage: 400 V ±10% Electrical Protection Class: minimum IP54 Operating Temperature: -10 °C to +40 °C HEPA Filter: optional H13 or H14 Applications: grinding, blasting, cleaning, welding fumes, laser engraving, machine processing CE marking: present Machinery Directive: 2006/42/EC EMC Directive: 2014/30/EU Low Voltage Directive: 2014/35/EU

Condition: used, Year of construction: 1999, suction capacity: 5,600 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which results in high efficiency of the device. Sinbran filter cartridges. SINBRAN filter cartridges are environmentally friendly and therefore suitable for use in the pharmaceutical and food industries. They are suitable for separating aerosols of organic materials, such as those created during laser cutting operations. Bedjvxtkzjpfx Albown SINBRAN filter cartridges combine the advantages of membrane filters with the advantages of rigid body filters: Large filter surface requiring minimal space. High mechanical load capacity, very long life cycle, low pressure drop and high filtration efficiency is a new approach to dust removal that achieves impressive filtration results, even in particularly difficult applications. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters it causes minimal pressure loss. Short compressed air pulses during the filtration process ensure effective filter cleaning. 7.5 Kw fan Efficiency 5600 m3/h Sinbran filter inserts 12 pcs. Negative pressure 3000 Pa

Year of construction: 2022, operating hours: 998 h, condition: used, functionality: fully functional, machine/vehicle number: 031022210023, We offer setup for SLS 3D printing consisting of Sinterit LISA X SLS 3D printing machine, Sinterit Powder Handling Station, Sinterit Sandblaster SLS and cadMIX powder mixer. Details reg. Sinterit LISA X 3D printer : Laser type: IR Fiber Coupled Diode Laser, 30[W]; λ = 976 ± 3 [nm] rated to > 30,000 hrs Max. size of print diagonally: 398 [mm] (15.7 [in]) Max print volume: TPU based / Flexible material: 130x180x340 [mm] (5.1×7.1×13.3 [in]) PA / PP: 130x180x330 [mm] (5.1×6.7×13.3 [in]) Layer height (min – max): 0.075 – 0.175 [mm] (0.003 – 0.006 [in]) Build Speed: up to 18.4 [mm/h] (0.72 [in/h]) Serial number: 031022210023 Manufacturing date: 05/2022 Country of origin: EU, Poland IEC protection class: Class 1 IP code: IP30 Machine type: Selective Laser Sintering 3D Printer Dimensions (W × D × H): 650 × 610 × 1200 mm (25.6 × 24.0 × 47.2 in) Total weight: 145 kg (319.0 lbs) Supply voltage range: 190–240 V AC Supply frequency range: 50–60 Hz Maximum power consumption: 1650 W Bjdpfx Aoy Snn Hslbewn AC current: 8 A AC voltage for current rating: 230 V AC Number of phases: 1 Short-circuit current rating: 6 kA Total printing time : 998 hrs For more details and technical specifications please see attached .pdf documents. We are selling complete setup together not separately. Complete setup bought in Slovakia. Examples from printer are available. Box for transport is available. Printer has open system, it is possible to modify the parameters. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, functionality: fully functional, /// Overview Bsdpsy Sk T Esfx Albown The NB7X is a high-performance automatic edge banding machine designed for handle-free cabinet door production. It switches easily between half bevel (45°) and full straight edge modes, and features twin diamond cutters, a twin glue station, and a twin tape coil magazine. Suitable for panels from 9 to 50 mm thick (straight) and 15–25 mm (half bevel), it is an excellent solution for modern, handleless furniture manufacturing. /// Key Features Bevel edge milling — Two 4 kW high-power motors at 2,800 rpm with 45° diamond forming bevel cutters for precise, crack-free milling. Pre-milling — Dual Leitz diamond cutters (2× 3.7 kW, 9,000 rpm) rework imperfections from panel saw cutting for superior edge adhesion. Twin glue system — Separate gluing units for straight and 45° bevel edges; Teflon-coated EVA glue pot (~5 L) plus optional auto glue pumping with a 25 kg basin. Pre-heating — Warms the panel edge before gluing, ideal for cold or humid environments. Tape handling — Separate tape brackets for full straight and half bevel modes, with an edge tape grooving device for cleaner folding on thicker tapes. End, rough, fine & corner trimming — Full set of trimming stations with high-speed motors and copy-tracing structures to protect hinge holes. Scraping & buffing — Flat and profile scraping removes excess glue; dual-cloth buffing delivers a polished, shiny finish. Top presser — Aluminum beam with auto height adjustment based on workpiece thickness; compact wearproof rubber rollers prevent displacement during conveying. Safety — Feeding protector, workpiece thickness detection, interval feeding detection, and emergency stop. Control — 10″ touch screen with PLC control (380V/50Hz), energy-saving standby mode, and remote switch. Available in English, Simplified Chinese, and Traditional Chinese. /// Machine Construction The heavy-duty welded steel body undergoes heat treatment, vibration aging treatment, sandblasting, and CNC finishing for long-term dimensional stability. All machines are assembled by experienced technicians following strict SOPs and delivered with a Quality Certificate signed by a QC specialist.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, We offer refurbished turbines from a continuous shot blasting machine - Rösler RRB 22/5-L. Turbine type - Hurricane H42. The turbines have been refurbished using original spare parts made of tool steel. Shot blasting machine, sandblaster, blasting turbine, shot blasting, sand blasting, throwing turbine. Bedpfjyy Rybsx Albswn

Condition: new, Year of construction: 2026, CORMAK CL300 Pulsed Laser Cleaning Machine 300W The CORMAK CL series pulsed laser cleaners are industrial devices designed for fast, precise, and non-contact removal of contaminants from metal, non-metal, and wooden surfaces. Depending on the application requirements, three power variants are available – CL200, CL300, and CL500 – all based on JPT MOPA pulsed fiber laser sources. This ensures high process stability, a wide range of parameter adjustment, and the ability to work both with delicate components and more demanding surfaces. Technical Specifications Parameter Value Dimensions (W × H × D) 260 × 460 × 490 mm Weight 31 kg Laser Source Brand JPT Fiber Interface QCS Operating Mode MOPA Laser Wavelength 1064 nm Maximum Pulse Energy 5 mJ Fiber Cable Length 5 m Bwjdpfxjy Sgn Se Albjn Laser Pulse Frequency 1–3000 kHz Pulse Duration 13–500 ns Laser Spot Size 7 ± 1 mm Laser Line Length 0.01–150 mm Laser Line Width 0.01–150 mm Process Gas None required Scanning Area (Lens) 130 × 130 mm, F254 Cooling System Air-cooled Scanning Speed 0–30000 mm/s Operating Temperature 10–30°C Operating Humidity < 70% non-condensing Operating Voltage AC 230 V, 50/60 Hz Efficient and Precise Surface Cleaning CORMAK laser cleaning systems effectively remove: rust, paint coatings, varnishes, operational deposits, oxides, oil residues, resins, and other difficult contaminants. Thanks to adjustable pulse energy, frequency, and pulse duration, the cleaning process can be optimized for both: precise and selective cleaning of molds, dies, tools, and precision components, and efficient preparation of larger surfaces for further processes such as welding, painting, or bonding. The non-contact nature of laser cleaning minimizes the risk of mechanical damage, microcracks, or deformation of the base material. Advanced JPT MOPA Technology The use of JPT MOPA laser sources provides a wide adjustment range for pulse frequency and pulse width, allowing optimal energy density settings depending on the type of contamination and the base material. The long fiber cable increases working flexibility at greater distances from the main unit, which is especially useful when working on: large structures, production lines, installed machine components, steel constructions, molds, facades, and industrial equipment. All CL series models operate at a wavelength of 1064 nm, ensuring high effectiveness on common industrial materials such as: structural steel, stainless steel, aluminum alloys, and many other technical substrates. Cost-Effective and Environmentally Friendly Operation The CL series devices are air-cooled and do not require process gases or abrasive materials, which: simplifies installation, reduces operating costs, minimizes maintenance requirements, and makes the cleaning process more environmentally friendly. High scanning speeds combined with adjustable beam parameters significantly reduce processing time compared to traditional methods such as: sandblasting, shot blasting, or chemical cleaning, while ensuring repeatable results and a high-quality surface finish after cleaning.

Condition: new, power: 330 kW (448.67 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, STANDARD SPECIFICATION * Day Cab * Adaptive Cruise Control with FCW and AEBS-3 * Lane Change Warning System * Goodyear * Emissions Standard Euro 6 * Automated Transmission, TraXon, 12 gears * Standard Component Arrangement * Fuel Tank on Left * DAF Connect * Warranty Plus Driveline - 3 years - 300,000 km Options * Exterior Sun Visor * LED Headlights, Cornering and Fog Lamps * Central Locking, 3 Keys, 2 Remote Controls * Lower Step Cabin in Crystal White * Steering Wheel with Silver Accents * Door Trim: Loose Weave Fabric * Driver's Seat: Luxury Air * Armrests on Both Sides of the Driver's Seat * Passenger Seat: Cinema & Table, Fabric Cover * Dashboard Table * Cool Box or Refrigerator * Automatic Climate Control for Cabin * Parking Heater with Waste Heat Pump and Timer * Roof Hatch with Electric Operation * Accessory Power Supply: Standard + 2x 40 A * ECAS Remote with Extended Functions * Toll Preparation * Digital Tachograph, VDO 1C, Version G2V2 * Speed Limiter Setting: 90 km/h * DAF Infotainment Luxury Plus, Luxury Speakers * Antennas: DAB-Prep. Radio, 2x Mobile, GNSS Extra: CB * Wireless Charger * Reversing Warning System * Front: 8.00 t, Air Suspension, 161 N * Front Air Suspension: Medium * F1, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * R1, 315/70R22.5 GO KMAXD2 154/150 L Traction CBA * R2, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * MX-11 Engine, 330 kW/449 HP, Cab Emblem: 450 * 12-Speed TraXon Transmission 12TX2210 DD, 16.69-1.00 * Rear Axle Ratio 2.47 * Mechanical Differential Lock Bwodpfx Aetv T Avolben * MX Engine Brake * Parking Brake Assistant * Wheelbase 4.60 m / Rear Overhang 2.55 m * Longitudinal Members 260/7.0 mm, Continuous Inner Reinforcement * 545-l Aluminum Fuel Tank Left, Height 620 mm * Use with Drawbar, Type Plate, up to Max Gross Vehicle Weight * Crossmember D137 + Rockinger Coupling D130 * Pneumatic Coupling for Trailer, Swivel Coupling * Electrical Connection for Trailer, 24 V/15-pin * Hard-wired Body Signals and Warnings * Side Marker Lights * Body Mounting Method BAM 1, Console Type B * Tail Lift Application * Hard-wired Steering Right, No First Right * Alternator 130 A, Batteries 2 x 210 Ah AGM * Battery Energy Monitoring Day Registration 03.12.2025 Payload: 14,390 kg Body: ZIKUN Swing-Board I Body Technical Data: Through-loading length: 7,250 mm Loading length: 7,400 mm Through-loading width: 2,480 mm Rear portal: Loading width inside: 2,480 mm External width: 2,550 mm Through-loading height inside: 2,150 mm Entry height: approx. 1,199 mm Overall height: approx. 3,549 mm Underframe: Stable lightweight construction ZIKUN Flap Swivel Mechanism Fixed Roof Powder-coated in RAL 9010 Pure White Collision protection: Welded steel buffer strips on both sides for impact protection. -- PVC mudguards on rear axle -- Holder for wheel chock + 2 chocks -- Red position lights above tail lift -- Side contour markings in white, rear in red The entire body is sandblasted, primed, and painted or powder coated in one color. Underframe and Superstructure: DAF E1980 WHTE Integrated load securing with CRS system (4 rows) in roof and floor, incl. 4 locking bars with 6 horizontal spring telescopic rods (CRS System Ancra-Jungfalk, Dekra certified to VDI 2700 Code XL). Sliding access step Pallet protection edge left and right. Interior lighting as LED spotlights mounted at the top rear, connected to cab switch. Additional interior lighting as LED spotlights mounted at the rear. Front wall/bumper plate made of aluminum-

Condition: new, power: 270 kW (367.10 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, STANDARD SPECIFICATION * Day Cab * Mechanical cab suspension * Passenger seat: cinema style with fabric upholstery * Adaptive cruise control with FCW and AEBS-3 * Lane departure warning system Bwjdpor Sn Nnsfx Albon * Goodyear * Emissions standard Euro 6 * Automated gearbox, TraXon, 12 speeds * Standard component arrangement * Fuel tank on the left * PACCAR Connect * Plus Driveline Warranty - 3 years/500,000 km Options * LED headlights with cornering and fog lights * Windscreen with sun protection film * Central locking, 3 keys, 2 remote controls * Adjustable roof spoiler for Day Cab * Black mirror housings * Roof spoiler in cab color * Headlight bezel color: cab color * Bumper color: cab color * Steering wheel with silver accents * Door trim: loosely woven fabric * Driver's seat: Luxury Air * Armrest for driver's seat * Dashboard table * Cool box or refrigerator * Automatic cab climate control * Auxiliary heater with heat pump and timer * Roof hatch with electric control * ECAS remote control with extended functions * Toll system preparation * Digital tachograph, VDO 1C, version G2V2 * Cruise control setting: 90 km/h * DAF Infotainment Luxury Plus, luxury speakers * Wireless charger * Reversing warning system * Front axle: 8.00 t, air suspension, 161 N * Front air suspension: medium * F1, 315/70R22.5 GO KMAX S2 156/150 L Steering CBB * R1, 315/70R22.5 GO KMAX D2 154/150 L Traction CBA * MX-11 engine, 270 kW / 367 hp cab emblem: 370 * 12-speed TraXon gearbox 12TX2010 DD, 16.69-1.00 * Rear axle ratio 2.47 * Mechanical differential lock * MX engine brake * Parking brake assist * Wheelbase 5.10 m / rear overhang 2.75 m * Longitudinal frame 260/7.0 mm, continuous internal reinforcement * Use with drawbar, type plate, up to max. gross combination weight * Cross member D137 + Rockinger coupling D130 * Pneumatic connection for trailer, rotary coupling * Electrical connection for trailer, 24 V/15-pin * Tail lift application Day registration from 03.12.2025 Superstructure: ZIKUN Swing-Board I body Through-loading length: 6,650 mm Loading length: 6,800 mm Clear portal: 2,480 mm Internal loading width: 2,480 mm External width: 2,550 mm Internal through-loading height: 2,100 mm Loading height: approx. 1,177 mm Overall height unladen: approx. 3,479 mm Subframe: robust lightweight construction made of pressed steel sheets Bulkhead: made of special automotive-grade plastic panels, closed up to the roof, with a central strut, flush fitted Side walls: ZIKUN folding swing mechanism Roof: fixed roof consisting of steel spars with permanently bonded aluminum sheets, powder-coated in RAL 9010 pure white Bumper protection: welded steel anti-collision strips on both sides as bumpers PVC mudguards on the rear axle 1 set of mudflaps for same Holder for wheel chock + 2 chocks Red position lights above the tailgate Side contour markings in white, rear in red Anti-spray mats in the rear mudguards Painting: The entire bodywork is sandblasted, primed and painted in a single color or powder-coated. Subframe and body: DAF W9815WHTE Integrated load securing with CRS system (4 rows) in roof and floor, incl. 4 locking bars with 6 horizontal spring-loaded telescopic rods (CRS system by Ancra-Jungfalk, Dekra certified according to VDI 2700 Code XL) Sliding step on each side, 2 sliding steps in the lower section of the folding wall left and right, approx. 600 mm long Pallet stop edge left and right Interior lighting as LED spotlight mounted at rear at the top, with cab switch

Condition: new, mileage: 2 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 2,000 mm, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor - Tool box - Transportation Bjdpfx Aljy R Ud Eebswn = Additional options and accessories = - Air horn - All wheel drive - Aluminium fuel tank - Bluetooth - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - PTO - Radio/cassette player = Remarks = Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in tough conditions. Its 394 hp engine and 6x6 drive system ensure excellent performance on rough terrain. The flexible cargo body with benches and twist locks makes it perfect for troop transport and container logistics. This truck offers reliability for challenging off-road missions and operations. Specifications Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for superior traction in off-road environments. - Maximum Gross Vehicle Weight (GVW): 27 tons, suitable for heavy transport. - Axle Configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential lock. - Suspension: Reinforced 3-leaf front suspension (8.0 t) and rear suspension (2 x 13.0 t). - Wheelbase: 5100 mm, for stability and maneuverability. - Engine: 12.8-liter inline-6 OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and VG 3000-3W transfer case. - Tires: 365/85 R 20, optimized for off-road use. Cargo Body Features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Anti-slip checker plate steel (3/5 mm, S235JR) with 10 tie-down rings. - Side Walls: Foldable, removable side walls and tailgate; flatrack configuration possible. - Twist Locks: 4 units for ISO 20 ft containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and Tarpaulin: Steel bows with waterproof PVC tarpaulin (630 g/m², UV-resistant), white RAL color. - Extras: Foldable steps, rubber pads, mud flaps with anti-stone chip coating. Included Accessories: - Lockable toolbox on chassis. - Jerrycan holders for water and fuel. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasted (SA 2½), waxed protection, white RAL color. High Performance: - Versatility: Flexible for personnel, cargo, or container transport. - Durability: Robust steel construction for off-road use. - Efficiency: Quick adjustment of the cargo body without tools. - Reliability: Reinforced suspension and powerful engine. Applications: - Military Operations: Troop and equipment transport. - Logistics: Cargo transport in remote areas. - Container Transport: ISO 20 ft containers. Additional Options: - Lockable fuel caps, tank protection plate. - LED lighting, first aid kit, warning triangle, 6 kg fire extinguisher. - Built for Tough Conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rugged off-road environments and demanding logistics operations — the ideal solution for heavy-duty transport challenges. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or = More information = General information Bodywork: Tarpaulin Cab: day ...

Condition: new, mileage: 4 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 14.00 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 2,000 mm, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Aluminium fuel tank - Bluetooth - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - PTO - Radio/cassette player = Remarks = Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in tough conditions. Its 394 hp engine and 6x6 drive system ensure excellent performance on rough terrain. The flexible cargo body with benches and twist locks makes it perfect for troop transport and container logistics. This truck offers reliability for challenging off-road missions and operations. Specifications Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for superior traction in off-road environments. - Maximum Gross Vehicle Weight (GVW): 27 tons, suitable for heavy transport. - Axle Configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential lock. - Suspension: Reinforced 3-leaf front suspension (8.0 t) and rear suspension (2 x 13.0 t). - Wheelbase: 5100 mm, for stability and maneuverability. - Engine: 12.8-liter inline-6 OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and VG 3000-3W transfer case. - Tires: 365/85 R 20, optimized for off-road use. Cargo Body Features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Anti-slip checker plate steel (3/5 mm, S235JR) with 10 tie-down rings. - Side Walls: Foldable, removable side walls and tailgate; flatrack configuration possible. - Twist Locks: 4 units for ISO 20 ft containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and Tarpaulin: Steel bows with waterproof PVC tarpaulin (630 g/m², UV-resistant), white RAL color. - Extras: Foldable steps, rubber pads, mud flaps with anti-stone chip coating. Included Accessories: - Lockable toolbox on chassis. - Jerrycan holders for water and fuel. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasted (SA 2½), waxed protection, white RAL color. High Performance: - Versatility: Flexible for personnel, cargo, or container transport. - Durability: Robust steel construction for off-road use. - Efficiency: Quick adjustment of the cargo body without tools. - Reliability: Reinforced suspension and powerful engine. Applications: - Military Operations: Troop and equipment transport. Bedoy R Ar Rjpfx Albjwn - Logistics: Cargo transport in remote areas. - Container Transport: ISO 20 ft containers. Additional Options: - Lockable fuel caps, tank protection plate. - LED lighting, first aid kit, warning triangle, 6 kg fire extinguisher. - Built for Tough Conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rugged off-road environments and demanding logistics operations — the ideal solution for heavy-duty transport challenges. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or = More information = General information Bodywork: Tarpaulin Cab: day ...

Condition: new, mileage: 1 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 2,000 mm, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - 1 fuel tank - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Aluminium fuel tank - Bluetooth - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - PTO - Radio/cassette player = Remarks = Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in tough conditions. Its 394 hp engine and 6x6 drive system ensure excellent performance on rough terrain. The flexible cargo body with benches and twist locks makes it perfect for troop transport and container logistics. This truck offers reliability for challenging off-road missions and operations. Specifications Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for superior traction in off-road environments. - Maximum Gross Vehicle Weight (GVW): 27 tons, suitable for heavy transport. - Axle Configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential lock. - Suspension: Reinforced 3-leaf front suspension (8.0 t) and rear suspension (2 x 13.0 t). - Wheelbase: 5100 mm, for stability and maneuverability. - Engine: 12.8-liter inline-6 OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and VG 3000-3W transfer case. Bwodpfxsy R Ar Do Albon - Tires: 365/85 R 20, optimized for off-road use. Cargo Body Features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Anti-slip checker plate steel (3/5 mm, S235JR) with 10 tie-down rings. - Side Walls: Foldable, removable side walls and tailgate; flatrack configuration possible. - Twist Locks: 4 units for ISO 20 ft containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and Tarpaulin: Steel bows with waterproof PVC tarpaulin (630 g/m², UV-resistant), white RAL color. - Extras: Foldable steps, rubber pads, mud flaps with anti-stone chip coating. Included Accessories: - Lockable toolbox on chassis. - Jerrycan holders for water and fuel. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasted (SA 2½), waxed protection, white RAL color. High Performance: - Versatility: Flexible for personnel, cargo, or container transport. - Durability: Robust steel construction for off-road use. - Efficiency: Quick adjustment of the cargo body without tools. - Reliability: Reinforced suspension and powerful engine. Applications: - Military Operations: Troop and equipment transport. - Logistics: Cargo transport in remote areas. - Container Transport: ISO 20 ft containers. Additional Options: - Lockable fuel caps, tank protection plate. - LED lighting, first aid kit, warning triangle, 6 kg fire extinguisher. - Built for Tough Conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rugged off-road environments and demanding logistics operations — the ideal solution for heavy-duty transport challenges. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or = More information = General information Bodywork: Tarpaulin...

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 020616/P, total width: 70 mm, total length: 90 mm, total height: 180 mm, pressure: 8 bar, operating pressure: 8 bar, input voltage: 230 V, Equipment: cabin, For sale: METAL FINISHING water blasting machine Bjdjy Rz Abspfx Albown - Type – waterblast 800 - Model – WBL 001 - Serial No. – 020616/P - Year: 2008 The machine has seen minimal use and has been regularly maintained. It is highly practical and extremely efficient. Its key advantage is that with high water pressure—containing abrasive media—it impacts the metal surface, achieving excellent results. The main benefit of the water blasting method is that the water and abrasives circulate continuously, returning to the tank. This means there is no dust, no abrasive particles released into the environment, and the work area remains clean at all times. The machine is connected to the mains supply and ready for immediate operation.

Condition: new, mileage: 3 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 2,000 mm, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor - Tool box - Transportation Bsdpfx Aley Ry Nyjbown = Additional options and accessories = - Air horn - All wheel drive - Aluminium fuel tank - Bluetooth - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - PTO - Radio/cassette player = Remarks = Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in tough conditions. Its 394 hp engine and 6x6 drive system ensure excellent performance on rough terrain. The flexible cargo body with benches and twist locks makes it perfect for troop transport and container logistics. This truck offers reliability for challenging off-road missions and operations. Specifications Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for superior traction in off-road environments. - Maximum Gross Vehicle Weight (GVW): 27 tons, suitable for heavy transport. - Axle Configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential lock. - Suspension: Reinforced 3-leaf front suspension (8.0 t) and rear suspension (2 x 13.0 t). - Wheelbase: 5100 mm, for stability and maneuverability. - Engine: 12.8-liter inline-6 OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and VG 3000-3W transfer case. - Tires: 365/85 R 20, optimized for off-road use. Cargo Body Features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Anti-slip checker plate steel (3/5 mm, S235JR) with 10 tie-down rings. - Side Walls: Foldable, removable side walls and tailgate; flatrack configuration possible. - Twist Locks: 4 units for ISO 20 ft containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and Tarpaulin: Steel bows with waterproof PVC tarpaulin (630 g/m², UV-resistant), white RAL color. - Extras: Foldable steps, rubber pads, mud flaps with anti-stone chip coating. Included Accessories: - Lockable toolbox on chassis. - Jerrycan holders for water and fuel. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasted (SA 2½), waxed protection, white RAL color. High Performance: - Versatility: Flexible for personnel, cargo, or container transport. - Durability: Robust steel construction for off-road use. - Efficiency: Quick adjustment of the cargo body without tools. - Reliability: Reinforced suspension and powerful engine. Applications: - Military Operations: Troop and equipment transport. - Logistics: Cargo transport in remote areas. - Container Transport: ISO 20 ft containers. Additional Options: - Lockable fuel caps, tank protection plate. - LED lighting, first aid kit, warning triangle, 6 kg fire extinguisher. - Built for Tough Conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rugged off-road environments and demanding logistics operations — the ideal solution for heavy-duty transport challenges. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or = More information = General information Bodywork: Tarpaulin Cab: day ...

Condition: new, mileage: 5 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 14.00 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 2,000 mm, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Aluminium fuel tank - Bluetooth - Differential Lock - Leaf spring suspension Bwodpfxsy Rym Ss Alben - Parabolic suspension - Passenger seat - PTO - Radio/cassette player = Remarks = Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in tough conditions. Its 394 hp engine and 6x6 drive system ensure excellent performance on rough terrain. The flexible cargo body with benches and twist locks makes it perfect for troop transport and container logistics. This truck offers reliability for challenging off-road missions and operations. Specifications Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for superior traction in off-road environments. - Maximum Gross Vehicle Weight (GVW): 27 tons, suitable for heavy transport. - Axle Configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential lock. - Suspension: Reinforced 3-leaf front suspension (8.0 t) and rear suspension (2 x 13.0 t). - Wheelbase: 5100 mm, for stability and maneuverability. - Engine: 12.8-liter inline-6 OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and VG 3000-3W transfer case. - Tires: 365/85 R 20, optimized for off-road use. Cargo Body Features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Anti-slip checker plate steel (3/5 mm, S235JR) with 10 tie-down rings. - Side Walls: Foldable, removable side walls and tailgate; flatrack configuration possible. - Twist Locks: 4 units for ISO 20 ft containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and Tarpaulin: Steel bows with waterproof PVC tarpaulin (630 g/m², UV-resistant), white RAL color. - Extras: Foldable steps, rubber pads, mud flaps with anti-stone chip coating. Included Accessories: - Lockable toolbox on chassis. - Jerrycan holders for water and fuel. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasted (SA 2½), waxed protection, white RAL color. High Performance: - Versatility: Flexible for personnel, cargo, or container transport. - Durability: Robust steel construction for off-road use. - Efficiency: Quick adjustment of the cargo body without tools. - Reliability: Reinforced suspension and powerful engine. Applications: - Military Operations: Troop and equipment transport. - Logistics: Cargo transport in remote areas. - Container Transport: ISO 20 ft containers. Additional Options: - Lockable fuel caps, tank protection plate. - LED lighting, first aid kit, warning triangle, 6 kg fire extinguisher. - Built for Tough Conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rugged off-road environments and demanding logistics operations — the ideal solution for heavy-duty transport challenges. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or = More information = General information Bodywork: Tarpaulin Cab: day ...