Sandblasting container

Oliver Fritz GmbH & Co. KG

Condition: new, Year of construction: 2026, Pressure blast cabinet for internal pipe blasting with turntable and manual blasting operation - Filter system - Turntable with prism for pipe support placement - Driven internal pipe lance - Program storage: travel path, feed rate, blow-off function Fjdpfx Adjyn Inwopsfw - External blasting nozzle with oscillation (option)

Condition: new, Isitan Hydraulic 4 Rolls Round Bending Machine 4R HMS 1270 x 130 Upper and lower roll driven Hydraulic side roll infeed 3 digital displays Hydraulic folding bearing Hardened rolls Conical bending device Separate control panel Useful length : 1270 mm Top roller diameter : 130 mm Side rolls diameter : 130 mm Motors total power : 3,3 KW Working speed : 5m/min. Weight : 2150 kg Dimensions (mm) : 3200 x 1150 x 1110 (L x W x H) Bending power : 5mm Ffjdjiffwqspfx Adpsw Bending capacity : 4mm All bending capacities are calculated on the basis of 250 N/mm2 yield strength Material ( ST 37 - ST 42 mild steel )

Condition: new, Year of construction: 2026, Pressure blasting cabin 4-axis controlled cleaning of moulds, steel rings, ingot moulds in the aluminum, tire mold, pressing tools, etc. Ffedpodrtanofx Adpsw The travel of the jets is freely programmable. 2 PCs automatic nozzle and 1 St. hand nozzle for cleaning the parts. HARDOX turntable and feed screw for long-lasting use of the blasting machine. For questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2026, Abrasive Conveyor Screw 5m with Dosing Hood Ffjdpfxoynz Ide Adpjw For installation as a transverse screw conveyor to the bucket elevator at the end of the hall (pushing abrasive across the full hall width with a forklift) - 5m + outlet to bucket elevator, solid-blade screw Ø250mm with 5mm thick screw flights. - Can be used as an abrasive storage hopper. The blasting system draws abrasive as needed via a level probe. - Depending on installation depth, allows up to 24 hours of uninterrupted blasting without hall cleaning. - Hall cleaning takes only 10 minutes using a forklift or wheel loader. - Very low maintenance and repair costs compared to a complete conveyor floor. - Particularly suitable for very heavy workpieces. - Lower acquisition costs compared to a full-area conveyor floor. - Reduced foundation costs compared to a full-area conveyor floor. - Can be pushed across the full hall width as opposed to a sweep pit. - Very high warranty period.

Condition: excellent (used), Year of construction: 2011, operating hours: 59,234 h, functionality: fully functional, This machine is for sale by a European corporation and is in exceptionally well-maintained condition. Further photographs and video recordings are available at any time upon request. Technical Data – DMC 210 FD Machine type: 5-Axis Machining Centre Model series: DMC 210 FD Machine category: Metal-Cutting Manufacturing Equipment 3-Axis Milling Machine CNC-controlled Year of manufacture: 2011 Condition: Very good Operating hours: approx. 59,000 h Weight: 50,000 kg Control / CNC: CNC control, Siemens 840D Solutionline Number of axes: 5-axis machining center Control type: Fully automatic (Code 017) Spindle / Tooling Tool holder: HSK 100, DIN 69871 HSK100 Spindle type: HSK100 Maximum spindle speed: 6,300 rpm Maximum feed rate: 60 m/min Maximum tool weight: 35 kg Maximum tool length: 450 mm Maximum tool diameter: 250 mm Tool magazine / Measurement technology: Tool magazine: 280 positions Measuring probe: Renishaw MP10 Travels: X-axis travel: 1,800 mm Y-axis travel: 2,100 mm Z-axis travel: 1,250 mm Table / Workpiece Table length: 1,850 mm Table width: 1,850 mm Maximum workpiece length: 1,500 mm Maximum workpiece weight: 5,000 kg Power supply / Connection data: Mains connection: 400 V, 3/N, PE, 50 Hz Power consumption: 167 kVA Maximum current: 241 A Maximum circuit breaker: 250 A DC control voltage: 24 V DC Fjdpfx Aex Sylkjdpefw AC supply voltage: 230 V AC Total installed power: 163 kW Equipment: Operator platform: Available Coolant system: Available Chip extractor: Available Operating manual / Documentation: Available

Condition: new, Year of construction: 2026, 200L mobile pressure-blasting vessel for construction sites or stationary use. Fittings are securely mounted under the handle. Very well suited for robust site applications. Comprising: - 200L pressure vessel - Pre-sieve - Weather protection lid - Water separator - Pressure regulator - Adjustable conveying air control (air quantity for vessel and blast hose) - Blast hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57m³/min) - Abrasive metering valve, Y-piece rubber coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man's switch with control cable - Controlled quick venting Fsdpjynr E Tjfx Adpjfw Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with bucket (Hobbock) and lid as an attachment for extended blasting without refilling - etc. Manufactured in Germany

Condition: new, Year of construction: 2026, Pressure blasting pot, 140L, mobile for construction site or stationary use. Fittings securely mounted under the handle. Very well suited for tough construction site applications. Includes: - 140L pressure vessel - Pre-filter - Weather protection cover - Water separator - Pressure regulator - Adjustment for conveying air (tank air volume and blast hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear Ffedpfoynr E Hsx Adpsw - Breathing air filter with 10m air hose - Blasting helmet Safety features: - Dead man’s switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with drum and lid as attachment for multi-hour blasting without refilling - etc. Made in Germany

Condition: as good as new (ex-display), Year of construction: 2025, 5 KW Air-cooled chiller for outdoor installation with axial fans. In standard equipment incl. p3 pump. Technical data on request . The machine is available from stock in Güglingen. Fsdpfxjfqlllo Adpsfw We advise you gladly and free of charge for your application . We have constantly changing chillers from stock in all sizes as a demonstration machine or new partly also used . In addition, we partly take refrigeration systems in payment or buy them.

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel - Pre-sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose Ffsdpfx Adsynr Emopjw - Blasting helmet Safety equipment: - Dead man switch with control cable - Pneumatic quick venting control Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Manufactured in Germany

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Ffjdpfelxyhfex Adpsw Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: good (used), Year of construction: 1985, Megamat carousel Type: 130-225-42 Device no.: 4492 Year: 1985 Rack height: approx. 5410 mm Unit width: approx. 2670 mm Unit depth: approx. 1300 mm + 300 mm table top Number of shelves: 42 Shelf width: approx. 2155 mm Shelf depth: approx. 410 mm Shelf height: approx. 200 mm Fedpfx Adovc Hk Nepsfw Shelf load: 100 kg Total load: 4,200 kg Color: beige/green

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9% Ffjdpfxert H Izj Adpsw

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Fsdpfx Adsdrtaljpjfw Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: good (used), Year of construction: 2011, machine/vehicle number: MS 1153, Offer 23158 Technical data ca : - passage to blasting chamber B 370 x 170 mm - blasting nozzle - Door opening to blasting chamber - Blasting material pressure vessel Fsdpfxsllvr Ds Adpsfw - blasting material recovery - separate control panel - space requirement blast machine 1600 x 2000 x H 1750 mm - space requirement blasting material container 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume 700 - 1500 m³/h - Suction fan 3 kW - space requirement filter unit 1600 x 1600 x H 3250 mm - mot. driven inlet roller table 4 m - roller table without drive 3 m - roller width approx. 800 mm - roller table height approx. 700 mm

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Fjdpjw Ivp Nsfx Adpofw