Used Welding Fumes for sale (5,655)

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 324 m², suction capacity: 18,000 m³/h, negative pressure: 2,250 Pa, input frequency: 50 Hz, Dust extraction, filtration, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is not sufficient to maintain clean air in the workshop. Laterally mounted ducts with a pollution collection point draw in contaminated air and lead it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. A compressed air pulse is applied to clean the cartridge filters automatically at the required intervals. After the compressed air pulse, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the outlet of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA according to EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a stationary, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges of 36 m2 each) Csdpfo Ahm Iijx Abajhd Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 400 V, total width: 1,050 mm, total length: 1,920 mm, total height: 2,160 mm, filter area: 23.75 m², suction capacity: 1,500 m³/h, Equipment: type plate available, HERDING brand dust extraction and welding fume extraction system. Self-cleaning filter, pneumatic, suitable for plasma, laser, abrasive blasting, grinding gypsum, cement, plastics, and all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Chsdszpxdkepfx Abasd Model: Delta Comp 1500-5/9 SB Fan power: 5.5 kW Capacity: 1500 m3/h Filtration area: 23.75 m2 Inlet diameter: 150 mm Height: 2.16 m Width: 1.05 m Depth: 1.92 m Weight: 1200 kg Stock number: 1158

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype Cjdsx Da Tiopfx Abashd For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 64 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Nederman dust extraction unit, fume extraction system, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, plastics, and catalysts, mineral processes, and all types of dry dust. Codpfxjz R T Elo Abaohd The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Fan power: 5.5 kW Capacity: up to 5000 m3/h Vacuum: up to 3000 Pa Cartridge filter elements: 16 pcs Filtration area: 64 m2 Inlet diameter: 315 mm Dimensions: Length: 1.60 m Width: 1.65 m Height: 3.40 m Base: 1.32 m x 1.12 m Stock number: 1174

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 620 kg, filter area: 60 m², suction capacity: 5,000 m³/h, negative pressure: 2,500 Pa, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based system for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Kemper System 8000 The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Fans with a power of 5.5 kW. Flow rate: 5000 m3/h Vacuum: 2500 Pa Filtration area: 60 m2 Stock number: 1147 Csdpfx Aozil Ivebashd

Condition: like new (used), Year of construction: 2014, type of input current: three-phase, total width: 1,200 mm, total length: 1,600 mm, total height: 3,850 mm, filter area: 120 m², suction capacity: 7,200 m³/h, Dust extraction unit, fume extraction unit, self-cleaning filter from the renowned NEDERMAN brand. The FilterMax DX, designed by Nederman, is a modular filtration system capable of serving extraction points throughout the entire production hall. Chsdpfezf Hn Aox Abaed The FilterMax DX is designed to operate with dry dust that may pose an explosion hazard. The unit is equipped with a reinforced, double-grounded housing with a panel designed to withstand extreme loads that occur during an explosion. The unit is like new – it has never been used (stock surplus). Brand: Nederman Model: FilterMax DX 6000 TR Year of manufacture: 2014 Designation: EX II 1/3 D T=125°C Capacity: 7200 m3/h Filtration area: 120 m2 Filter cartridges: 12 pcs Fan power: 11 kW Inlet diameter: 300 mm ATEX panel to relieve explosion pressure ATEX check valve Unit dimensions: Width: 1.20 m x 1.60 m Height: 3.85 m Base: 1.10 m x 1.40 m Stock number: 0008

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Price ex location: €650 (net) Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Csdpfx Ajyhxl Rjbaohd Year of manufacture: 1991 380V, 1.1kW, 2.6A, IP54 Condition: good Availability: immediately Location: Waltrop

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, volume flow: 1,000 m³/h, Equipment: documentation/manual, Welding fume extractor, dust collector, filter, pneumatic, vacuum-based, IVAT. For welding, grinding, and all types of dry dust. Filter cleaned pneumatically with compressed air (manually). Chodpfxsz R Shlo Abaod Model: Flex-22 Year of manufacture: 2018 Fan power: 1.1 kW Capacity: 1000 m3/h Cartridge-type filter element. Extraction arm, approximately 2.5 m long. Stock number: 1168

Condition: good (used), Year of construction: 2015, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, mobile welding fume extraction filter devices, welding fume extractors -Manufacturer: Kemper, filter unit for mobile welding fume extraction -Type: 63100 -Drive: 1.6 kW -Volume flow rate: 340 m³/h Codpfx Abex Hvqfjajhd -Extraction arm: not included -Machine dimensions: 300/300/H690 mm -Weight: 23.5 kg

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 135 kg, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 2,900 Pa, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter KEMPER. For welding, grinding, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency of the unit. Chedpfx Absyz Rt Djasd Model: Filter-Cell XL Year of manufacture - 7/2015 Fan power 1.5 kW. Airflow 1000 m3/h Vacuum 2900 Pa Cartridge filter element. Stock no. - 1128 1/2

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,000 mm, total height: 4,000 mm, filter area: 140 m², suction capacity: 3,800 m³/h, negative pressure: 3,500 Pa, Dust extraction unit, fume extraction for welding, self-cleaning filter, suitable for plasma cutting, laser cutting, sandblasting, shot blasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Motor power: 7.5 kW Capacity: 3800 m3/h Inlet diameter: 280 mm Filter cartridges: 9 pcs. Chjdpozlzv Ijfx Abaed Filtration area: 140 m2 Fire damper Noise silencer Dimensions: Height: 4.00 m Width: 1.65 m Depth: 2.00 m Base: 1.33 m x 1.84 m Stock number: 1148

Condition: good (used), functionality: fully functional, overall weight: 85 kg, SUCTION UNIT PLYMOVENT EMK 1602-H Manufacturer: PLYMOVENT Designation: EMK 1602-H Weight: approx. 85 kg Very good condition (see photos) Large castor wheels, 2 of which can be locked (simply operate with foot) Dimensions: Height 107 cm Chedpfxst Dkyte Abasd width 90 cm Depth 1100 cm Offer consists of 1 piece EMK1602-H General information: We are offering items here from various company liquidations, which we describe as well as possible and provide informative photos. Further information about the item cannot be provided. We offer the opportunity to view items on Tuesdays and Thursdays between 9 am and 4 pm by telephone appointment. If required, the item can be taken away immediately. Unless expressly described, this offer is for second-hand goods. Items have been visually inspected and are in good condition. Please note the photos Functionality performed - result ok. All offers ex stock 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. all dimensions are approximate Photos similar

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 100 m², suction capacity: 7,500 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, fume extraction, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: TEKA Model: Filtercube 4H Year of manufacture: 2008 The filter is cleaned by a microprocessor controller using pulses of compressed air during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central Filtercube filter ventilation unit, equipped with cartridge filters, provides an ideal solution for almost all problems in the field of fume and dust filtration. The fan is located on the clean side, minimizing the risk of explosion. The Filtercube production series is certified by a German institute according to DIN EN ISO 15012-1 and approved for welding class W3 as a stationary fume extraction unit. Applications: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables Cedpfx Ae Aazd Ejbashd system for general ventilation of halls (push-pull system, buoyancy system) extraction system in combination with an extraction table extraction system for grinding non-explosive materials Parameters: *Fan with a power of 7.5 Kw. *Capacity 7500 m3/h *Maximum vacuum 3000 Pa *Filtration area 100 m2 *Noise silencer Stock number: 1178

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Brand: FÜCHTENKÖTTER Model: FKPF 192/12 Fan power: 11 kW Airflow: 8000 m3/h Vacuum: 3200 Pa Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Filtration area: 216 m2 Year of manufacture: 2017 Chedpfx Aoy T Iyrobasd New filter cartridges (coated with impregnant) Dimensions: Height: 4.02 m Width: 3.95 m Depth: 1.85 m Base: 2.50 m x 1.70 m Stock number: 1120

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 200 kg, input voltage: 400 V, filter area: 15 m², suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, input frequency: 50 Hz, hose length: 3,000 mm, Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum KEMPER. For welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with non-polluting dust collection. The mobile cartridge filter KEMPER MaxiFil Clean is designed for continuous operation to filter welding fumes and dust with high concentrations. Suitable for use in welding carbon steels, low-alloy steels, high-alloy steels, and aluminum using any welding method. Economical in operation due to the long service life of the filter cartridge. Parameters: Chsdpszdqv Uefx Abaed Capacity - 1100 m3/h Maximum vacuum - 3200 Pa Three-phase fan with a power of 1.5 kW Filtration area - 15 m2 Year of manufacture - 2015 Patron filter cartridge with PTFE membrane Filtration efficiency - > 99.97% Built-in delay timer in start-stop mode. When connected to a start-stop sensor (optional), the delay time for fume extraction after the welding process is completed can be set to a value of 5-60 seconds. Stock number - 1145

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,200 mm, total height: 4,250 mm, filter area: 286 m², suction capacity: 18,000 m³/h, negative pressure: 3,500 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-operated for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16 Year of manufacture: 2010 Cartridge filter elements, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 18.5 Kw Fan model: FR 501 Codpfx Abjz Ayv Ujaehd Built-in frequency converter. Remote monitoring of the device is possible thanks to Donaldson's iCue technology. Capacity up to 18000 m3/h Inlet diameter: 630 mm Noise silencer included. New filter elements, custom-made according to the device's intended use, are also available on request. Stock number: 1155

Condition: used, Year of construction: 2015, type of input current: three-phase, input voltage: 400 V, filter area: 286 m², suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. Cjdpfxoz Trrhs Abajhd The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16-R Year of manufacture: 2015 Unit in the "R" version – reinforced construction with additional grounding. Built-in explosion relief flap. Delayed dust discharge valve, EX ATEX certified. Filtration area: 286 m2 Fan power: 7.5 kW Capacity: 6000 m3/h New filter cartridges installed in the unit. Stock number: 1029

Condition: used, Year of construction: 1999, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, filter area: 286 m², suction capacity: 7,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit, self-cleaning filter, pneumatic, vacuum-operated for continuous operation, from the renowned Donaldson Torit brand. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and for all types of dry dust. The fan is located behind the filter on the clean air side, minimizing the risk of explosion. The filter cartridges are pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Fan power: 9 kW Flow rate: 7000 m3/h Inlet diameter: 350 mm Number of filter cartridges: 12 Filtration area: 286.8 m2 Year of manufacture: 1999 Dimensions: Chjdpfx Aoz Hkgiobasd Width: 2.10 m Depth: 2.50 m Height: 3.37 m Base: 2.11 m x 1.52 m Stock number: 1171

Condition: used, Year of construction: 2011, filter area: 418 m², suction capacity: 14,000 m³/h, negative pressure: 3,600 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Brand: VALCO Chsdpewiuaqefx Abajd Model: PPX-18-W3 Thanks to the W3 approval, the filter in this version can be used when welding high-alloy steels. The filter is cleaned with compressed air pulses during operation, which ensures high efficiency of the device. The fan is on the clean side, which reduces the risk of explosion to a minimum. Parameters : Efficiency - 14000 m3/h Negative pressure - 3600 Pa Filtration area - 418 m2 Cartridge filter inserts - 18 pieces Fan - 15 Kw Inlet diameter - 450 mm total length - 2.80 m total width - 1.35 m height - 4.00 m Device from 2011 Full technical documentation available. There are 2 pieces of this device available. Stock no.: 0986 1/2

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Chedpfx Ajz N Am Usbaed Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: ready for operation (used), Euromate MFS UltraFlex Mobile Extraction Unit Mobile Filter Welding Fume Extraction Airflow: approx. 800 – 1,500 m³/h Arm length: 4m Pipe diameter: Ø203mm You are welcome to arrange a viewing appointment. Chjdeymlc Nspfx Abaed We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. Visit our shop and check out our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Year of construction: 2015, condition: used, A central welding fume extraction system is offered. Airflow: 30000m³/h, airflow: 30000m³/h, motor power: 30kW, compressed air connection: 6-8bar, max. static pressure: 2500Pa, duty cycle: 100%, control: PLC. The system is equipped with 2 spark traps and various ductwork components (extraction arms and hoods not included). An inspection is possible by arrangement. Codpfx Ajzy Rvtjbashd

Condition: used, Year of construction: 1988, Welding fume extractor Fabr.ESTA Type:SRF - 2000 Year 1988 Ready for use. Chjdpfx Abeu Hlppeasd

Condition: used, We are offering a welding fume extraction unit from the brand Euromate. Please contact us for a quote. Csdpfx Absxz R Aieashd

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, overall weight: 135 kg, input voltage: 400 V, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, input current: 3 A, Equipment: type plate available, Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum KEMPER. For welding, grinding, and all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. Chedpezu Rm Iofx Abasd Model: Filter-Master XL Year of manufacture: 11/2013 Fan power: 1.5 kW Capacity: 1000 m3/h Vacuum: 3000 Pa Filter cartridge Filtration area: 10 m2 Extraction arm length: 3.00 m Stock number: 1163