Used Sandblast for sale (348)

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminium tank right side AdBlue tank usable capacity 64 litres Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, level E – onboard diagnostics Cabin colour signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running light and low beam Automatic headlight leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED revolving beacons (amber), mounted on cab roof front Cable entry through cab roof both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Lasdex A Nntjpfx Affsk Roof bar for accessories, front Factory-mounted emblems/type designation Emission type plate (Euro...) L-label (low noise vehicles -96) Flatbed made of steel/welded construction, fixed-mounted, low profile Length approx. 4800 mm, width approx. 2480 mm Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left) Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left) Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning 6 stake pockets per side (3 each) Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled Robust front wall consisting of welded frame with recessed stake pockets Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour Tool boxes between rear axles fitted with chequer plate 5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour. Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double cable operation with folding sheave and accessories Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending up to 15°) Electronic overload shutdown with FX500 FASSI stability control FSC-S/II including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load holding valves XF (Extra Fast) + XP (Extra Power) systems RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency control for crane operation High pressure filter supplied plumbed Separate hydraulic tank (180 l) with filt

Condition: new, functionality: fully functional, machine/vehicle number: V101VVNG4003ESGR0ZL180W, Year of construction: 2023, !! We would be happy to advise you !! Production orientation ////: Vertical Conveyor system ////: Feed and discharge optional and dependent on the product Film feed ////: rear Form shoulder ////: fixed Operator display ////: touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (depending on film width) Packaging height ////: dependent on forming shoulder Speed ////: 20-60 bags/min. depending on material, packaging size and product Foil width ////: 100-320 mm Consumption ////: approx. 4KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 210 kg System dimensions ////: approx. 3560 x 1320 x 1500 mm System material ////: approx. 1500 x 960 x 1120 mm System material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer holder ////: matching ink wheel printer optional for an additional charge of EUR 1200 Ljdpjq Ikg Dofx Affjak Delivery time ////: Current delivery time under 10 weeks Features: • Stainless steel version also suitable for the food industry • Application for powder, grains, liquids, paste/dough and small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control using color symbols • Print mark sensor included • Automatic stopping for empty products (no product - no bag) • Bag closing system for finished stand-up pouches • Safety protective covers • Can be combined with upstream and downstream machines • Customer-specific changes / designs on request Additional options (on request and for an additional charge): • Stainless steel finish / painting • Zig-zag knife, Euro hole stamp etc. • Automatic stopping for empty products (no product - no bag) • Automatic product feed systems, cyclical insertion systems • Perforation units (tear thread) for easy opening • Gassing units for protective atmosphere (extend product shelf life) • Length-dependent product processing using photocell query

Condition: used, mileage: 8,500 km, power: 227 kW (308.63 HP), first registration: 07/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, brakes: retarder, color: white, gearing type: automatic, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, STANDARD SPECIFICATION * Local transport driver's cab * Adaptive Cruise Control with FCW and AEBS-3 * Lane departure warning system * Front: 7.50 t, parabolic, 152N * Goodyear * Emission standard Euro 6 * EAS unit right, discharge right pointing to the rear * Fuel tank left * Tank for AdBlue® 30 l, right chassis side * PACCAR Connect * Warranty Plus-Drivetrain-3 years-200,000 km Options * Mechanically reinforced cab suspension * Exterior sun visor green translucent Ledpfevxm Nkjx Affeak * Fog lights and cornering/turning lights * Central locking, 3 keys, 2 remote controls * Pneumatic steering column lock * Driver's seat: air-sprung luxury driver's seat * Armrest driver's seat * Passenger seat: air-sprung * Armrest passenger seat * Roof hatch with manual operation * Front axle 1, 7,500 kg, load index 154 * Rear: 13.00 t, air suspension, SR1344 * Rear axle 1, 12,600 kg, load index 148 * F1, 315/70R22.5GO KMAXS2 156/150 L Steering CBB * R1, 315/70R22.5GO KMAXD2 154/150 L Traction CBA * Engine PX-7, 227 kW/308 hp. Driver's cab emblem: 310 4,815.00 4,815.00 * Automatic transmission PowerLine, 8-speed * 8-speed PowerLine 8AP1200 overdrive transmission, 4.89-0.64 * Rear axle ratio 5.14 * Mechanical differential lock * Parking brake actuation with test position * Wheelbase 5.00 m/rear overhang 2.25 m * Longitudinal members 270/8.0 mm, without internal reinforcement * Fuel tank made of aluminum, 340 l * One wheel chock * Use with drawbar, type plate, up to max. GVW * Cross member D85-Dc70-V25, coupling D85, mounted * Pneumatic connection for trailer, rotary coupling * Electrical connection trailer EBS, 24V/2x7-pin * Mounting of bodies BAM 1, loose consoles * Generator 100 A, batteries 2 x 175 Ah * Air intake above, behind the driver's cab Body: Through-loading length: 6,600 mm Loading length: 6,750 mm Through-loading width rear portal: 2,480 mm Loading width i. L.: 2,480 mm External width: 2,550 mm Through-loading height: 2,100 mm Loading height approx.: 1,210 mm Overall height approx.: 3,483 mm Body weight approx.: 2,700 kg /- 5% according to DIN, depending on equipment (Without guarantee) 1.3 Substructure: Sturdy lightweight construction made of pressed steel sheets, cleanly electrically welded. Crossbars with buckle-resistant outer frame. ZIKUN folding swivel mechanism. Continuous side wall, horizontally divided. By folding down the lower side wall, the upper wall is mechanically swung onto the roof. The lever kinematic, assisted by spring tension, is mounted on the front wall. This ensures that there are no mechanical parts in the cargo area or in the corner stakes. The power transmission is via a torsion tube in the roof, so that the side walls can be moved smoothly and easily in any position. Important: When open, the lower side wall stands vertically on the vehicle. At the front on the end wall, a level, smooth entrance without obstructive stanchions. Upper folding wall parts made from special 25 mm aluminum composite panels. Central lock on the right and left side walls. Upper side wall parts do not extend beyond the roof edge when open. open, prepared for the addition of a tail lift (see special versions) Fixed roof consisting of steel bows with permanently glued-on aluminum sheets. Powder-coated in RAL 9010 pure white. The entire body sandblasted, primed, and painted in a single color. Substructure and body: DAF H3279WHTE Movable entry step On each side, 2 movable entry steps in the lower part of the folding wall on the left and right, approx. 600 mm lon

Condition: new, Year of construction: 2025, color: red, overall weight: 14,745 kg, maximum load weight: 12,500 kg, empty load weight: 2,245 kg, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, rear discharge Body: Water tank roll-off container approx. 12,000 liters. ARCHIVE PHOTOS Water tank without platform approx. 12,000 liters – per DIN 30722-1 - Internal clear dimensions (LxWxH): 5500x2394x1003 mm - Material grade: S235 (St-37) Lajdpfxex Avkhs Affek - Flooring/wall panels: Smooth floor plate 5 mm thick, sides 3 mm, roof and rear wall 4 mm - At the rear, bottom: 2x Storz A couplings with ball valve (4 inches) - At the rear, top: 1 Storz B coupling with elbow and cap (2 inches) - At the front hook, top: 1 Storz B coupling with elbow, coupling and cap (2 inches) - Galvanized and bolted access ladder at the front bulkhead, pipe for ventilation - Frame made of INP180 - On the roof: manhole, diameter 600 mm - Inside: 3 baffle walls, diameter 600 mm (large cavities) - Watertight (tested for water tightness) - Greasable steel rollers Tanks welded, degreased, sandblasted, internally primed with Epoxy Temabond ST 200, 300 µm, externally primed with epoxy resin paint, 60 µm and finished with 2-component paint (polyurethane paint B7) 40 µm, in RAL color shade 3000 Red Supplied with UVV sticker (DGUV), checklist (safety instructions), and warning markings – watertight (tested for water tightness) ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: new, Year of construction: 2025, functionality: fully functional, Machine Type: Vapormatt Vapormate Manufacturer: Vapormatt The Vapormate is our highly versatile, manual entry-level system. It is a very popular choice for users who need a compact unit for smaller spaces or want to test the wet blasting process before investing in a larger system. The Vapormate comes equipped with all the features you would expect from one of our larger manual systems. The wet blasting process was invented by Vapormatt in the 1950s. Over more than 70 years of ongoing development in wet blasting, an ergonomic and cost-effective system has emerged—the Vapormate. The integrated water recirculation system ensures efficient use of consumables. Thanks to water as the carrier medium, wet blasting enables gentler and more uniform processing than, for example, sandblasting. With this technology, you can achieve smooth and even surfaces on your parts. Further technical information can be found in the attached brochure. The stated price is net, plus the currently applicable statutory VAT and shipping costs. The unit may be shown in the photos with optional accessories, which are available separately and subject to additional costs. The quoted price refers to the base machine only. Ledpjtqml Tjfx Affjak If you are interested, we look forward to hearing from you. We are happy to provide you with non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This listing serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, phone, messaging portal). As a first step, we will send you a non-binding offer, in which we will also inform you about our general terms and conditions, legal notice, and the right of withdrawal before any purchase/contract conclusion takes place.

Year of construction: 2024, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21861 Specifications: 2024 model 0 hours Not used Laodoxyptkspfx Affjk 380 volts/ 50Hz Ready for delivery Description: We have a 2024 Endustri GM dust filter for sandblasting for sale. Everything works as it should and above all it is like new. It has not been used. Ready for delivery Own weight: 1 Model: GM støvfilter for sandblåsing

Year of construction: 2025, condition: new, Sandblasting cabin for clean blasting work without soiling the working environment. Suitable for various blasting materials, e.g. quartz, glass ball, plastic ball, etc. Ideal for cleaning, derusting or paint removal from metal parts of all kinds, e.g. engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are firmly attached to the housing Viewing window with glued-on protective film enables optimum visibility and work protection during workpiece processing Dust-free working due to all-round seals on lid and door frame Sturdy storage grid allows workpieces to be placed inside the cabin With drain opening for changing the blasting material Suction pipe for the blasting material fixed at the bottom of the collecting container With compressed air connection on the outside 2 large side doors for loading and unloading from both sides, also for longer workpieces Integrated exhaust system with replaceable air filter Control of the air flow via foot pedal 2 blasting guns: one fixed and one freely movable blasting gun 3 separate switches for on/off, suction and cabin lighting 2 fluorescent tubes (230 Volt), in separate housing with protective screen and replaceable protective foil, including 5 spare foils regulation of the working pressure via pressure regulator with manometer Scope of delivery: Ledpfx Aocqm Rroffeak High-quality blasting gun with ceramic nozzle 4 pieces ceramic nozzles (4 / 5 / 6 / 7 mm) Incl. 5 pieces of replacement foils for S

Condition: new, Year of construction: 2023, functionality: fully functional, warranty duration: 12 months, !! We are happy to advise you !! Production orientation ////: Vertical Conveying system ////: Infeed and discharge optional and product-dependent Film feed ////: rear Forming shoulder ////: fixed Operator display ////: Touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (dependent on film width) Packaging height ////: dependent on forming shoulder Speed ////: 15-30 bags/min depending on material, package size, and product Film width ////: 110-320 mm Power consumption ////: approx. 4.6KW Power supply ////: 220-240 V / 50 Hz / single-phase Machine weight ////: approx. 600 Kg Machine dimensions ////: approx. 1720 x 1400 x 1750 mm Machine material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer mount ////: suitable ink wheel printer available as an option for an additional €1,200 Delivery time ////: Current delivery time under 10 weeks Platform and Z conveyor system €12,000 Laedpfx Afeq Ikhaofek Features: Stainless steel construction—also suitable for the food industry • Application for powders, granules, liquids, pastes/dough, and small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control with color icons • Pouch closing system for finished stand-up pouches • Safety protection covers • Can be combined with upstream and downstream machinery • Customized modifications/constructions on request • 12-head weigher integrated • each hopper 0.8L Additional options (on request and at extra charge): • Stainless steel finish/coating • Zigzag knife, Euro hole punch, etc. • Automatic stop for empty product (no product – no bag) • Automatic product feeding systems, stepwise insertion systems • Perforation units (tear-open thread) for easy opening • Length-dependent product processing by photocell sensor Production orientation: Vertical

Condition: good (used), Feed container for blasting system, sandblasting system, blasting system, sandblasting cabinet, rotary basket system, wire belt, overhead conveyor and roller conveyor blasting system, free blasting system -Handover: in its current condition as inspected -System: Individual components see photos Lodpfxoqcyzws Affeak -Feed container: Type Exactomat 2 G - 60 -Vacuum pump flow rate: 26.2 m³/h -Dimensions: 830/580/H1730 mm -Weight: 296 kg

Condition: new, functionality: fully functional, power: 15.5 kW (21.07 HP), fuel type: gasoline, color: yellow, operation weight: 205 kg, Year of construction: 2025, Kaeser Mobilair M17 Construction Compressor, NEW! Max. operating pressure 15 bar, flow rate 1 m³/min. Honda petrol engine GX 630 with 15.5 kW, 20 l tank, Compressed air connection 1 x G 1/2, operating weight 205 kg, Transport frame with carrying handles, Aftercooler and condensate separator including connection lines. Other sizes available on request! Laodpfx Asx Alarjffsk Machine location: Warehouse D-46514 Schermbeck. _____ Buy Kaeser M17 Compressor | Mobilair M 17 new | mobile construction compressor 15 bar | Kaeser compressor Honda GX 630 | portable screw compressor | Kaeser 1000 l/min petrol | mobile compressed air compressor for construction site | Kaeser petrol compressor | Compressor with aftercooler | Transportable construction compressor | Kaeser M17 immediately available Benefits & Highlights: -Compact mobile screw compressor – ideal for changing work sites -Autonomous operation thanks to Honda petrol engine – no power connection required -Robust steel frame with carrying handles – easy to load & transport -Optimal compressed air treatment thanks to aftercooler & condensate separator -Ideal for air-powered tools, sandblasting, construction site operation -Easy maintenance & reliable – proven Kaeser quality -Very low noise levels due to sound-insulated compressor housing Fields of application: -Road and civil engineering -Fiber optic technology -Municipal building yards -Trades & commercial operations -Industrial applications -Independent compressed air supply (e.g. on sites without electricity) -For pneumatic tools, impact wrenches, demolition hammers, sandblasting, etc.

Condition: new, Year of construction: 2025, functionality: fully functional, air demand: 1.13 m³/h, pressure: 7 bar, warranty duration: 24 months, total width: 1,370 mm, total height: 2,080 mm, total length: 1,150 mm, overall weight: 350 kg, Equipment: cabin, lighting, The Vapormatt PUMA is a high-quality and versatile manual wet blasting cabinet from Vapormatt, the leading company in the wet blasting sector and the inventor of this technology in the 1950s. Over more than 70 years of development, Vapormatt has engineered the PUMA to be both ergonomic and efficient. With an optional insertable basket, small batch parts can be processed, and a clamping device enables easy handling of rims or wheels. Large workpieces weighing up to 125 kg can also be placed on the robust stainless steel grid. For easier operation, an optional stainless steel rotary table is available. The integrated recirculating water system with cascade tank, filter unit, and return pump ensures efficient use of water and blasting media. Compared to sandblasting, wet blasting allows for gentler and more uniform processing, thanks to water as the carrier medium. This technique enables you to achieve smooth and consistent surfaces on your parts. Technical data: - Internal dimensions: 1100 x 1100 x 1200 mm (LxWxH) - External dimensions: 1400 x 1200 x 2100 mm (LxWxH) Lsdpfx Astqmh Eeffoak - Pump output: 2.2 kW (400 V / 50 Hz) - Sump volume: approx. 142 L water / approx. 15–40 kg abrasive media - Work surface load capacity: 125 kg Prices are net plus the current applicable statutory VAT and shipping costs. The images may show the machine including optional accessories, which are available at additional cost. If you are interested, we look forward to hearing from you. We are happy to provide professional and non-binding advice. The European Commission provides a platform for extrajudicial online dispute resolution (the OS platform). This offer serves exclusively as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, telephone, online messaging platform). In the first step, we will provide you with a non-binding offer, together with information about our general terms and conditions with legal notice and your right of withdrawal, before any purchase or conclusion of contract takes place.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,400 mm, total length: 3,500 mm, total height: 2,350 mm, air demand: 200 m³/h, Cartridge filter unit MBX-6000 with 8 cartridges. Effective air capacity 6000 m³/h, electric motor 9 kW, 3x400 Volt, 50Hz, filter area: 104 m² (8x13 m²), filter class: M, according to DIN 60335, pneumatic filter cleaning with 10 minutes after-run, dust bins: 4 units, each 30 liters. Ljdpfox Ai Hpsx Affeak

Condition: good (used), Year of construction: 2004, table length: 3,000 mm, table width: 4,500 mm, operating pressure: 3,800 bar, warranty duration: 12 months, total length: 4,500 mm, total width: 3,000 mm, water pressure: 3,800 bar, (Pictures in actual condition) - two to four cutting heads - control unit will be renewed - will be sandblasted and repainted - pump optionally available Lodpfx Afegvpu Uefjak - available in 12-16 weeks after order Special features: - Z-axes can be moved in relation to each other - Z-axes double guided - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: new, functionality: fully functional, machine/vehicle number: V101VVNG6004ESGR0ZL200H, Year of construction: 2023, Production orientation ////: Vertical Conveyor system ////: Feed and discharge optional and dependent on the product Film feed ////: rear Form shoulder ////: fixed Operator display ////: touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (depending on film width) Packaging height ////: dependent on forming shoulder Speed ////: 20-110 bags/min. depending on material, packaging size and product Foil width ////: 100-320 mm Consumption ////: approx. 4.6KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 240 Kg System dimensions ////: approx. 1500 x 960 x 1220 mm System material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer mount ////: suitable incl. wheel printer optional for an additional charge of EUR 1200 Lodpjq Ikg Iofx Affeak Delivery time ////: Current delivery time under 10 weeks Features: • Stainless steel version also suitable for the food industry • Application for powder, grains, liquids, paste/dough and Small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control using color symbols • Bag closing system for finished stand-up pouches • Safety protective covers • Can be combined with upstream and downstream machines • Customer-specific changes / designs on request Additional options (on request and for an additional charge): • Stainless steel finish / painting • Zig-zag knife, Euro hole stamp etc. • Automatic stopping for empty products (no product - no bag) • Automatic product feed systems, cyclical insertion systems • Perforation units (tear thread) for easy opening • Length-dependent product processing using photocell query

Condition: used, filter area: 108 m², suction capacity: 5,000 m³/h, Dust extraction unit, welding fumes extractor, self-cleaning cartridge filter suitable for plasma, laser, sandblasting, and shot blasting applications. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the unit. The fan is positioned on the clean side to minimize explosion risk. Motor power: 7.5 kW Capacity: 5000 m³/h Inlet diameter: 315 mm Cartridge filter elements (replaced 04.2025): 9 pcs. Filtration surface: 108 m² Rotary valve for dust discharge Stock no.: 1076 Ljdsxx R Nkopfx Affjak Device dimensions: Filtration unit: Width: 1.95 m Depth: 1.35 m Height: 3.95 m Base: 1.66 m x 1.30 m Enclosed fan: Width: 1.40 m x 1.25 m Height: 1.25 m

Year of construction: 2025, condition: new, ASK - 0 Hanger Type Shot Blasting Machine; It is used for polishing sheet and metal parts which have come out of press and heat treatment, cleaning and roughening of castings, preparation before paint and rubber coating, taking forging parts to canvases and revision of old parts. (Quantity x Diameter): Ø: 800 H: 700 has 2 turbine x Ø 325mm with 6 blades The cabin is made of ST-37 sheet metal and the hot pot area is supported by Brinell or Manganese wear plate. The interior of the cabinet is covered with a rubber sheet to prevent it from being exposed to abrasion due to the sandblasting process. Rubber sheets are fixed to the cabinet with moldings. (Coating with a complete manganese armor is optionally offered to our customers.) The wear plate cladding is screw-in design for future wear-based replacements. It can be easily changed by authorized personnel in your company. Although the cabin door can be pneumatic or manual, it is designed as a winged system and 2 pieces. The cabinet door has a lock system to prevent it from being opened during the blasting process. In addition, there is a sensor or switch on the cabinet that stops sandblasting when the door is open. The system consisting of rail line, suspension gear system and crane (optional) is designed to allow the material to be sanded to move easily inside the machine. Lodpfx Ajvkf Agsffeak Full automation panel is available. Panel materials are Siemens / Schineider brand. Machine control is provided with a 10” PLC screen.

Condition: used, maximum load weight: 13,420 kg, overall weight: 16,000 kg, first registration: 01/2013, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2013, Wagon No. G0113245_1 – Manufacturer: Krone. * Sliding roof curtain * Simple corner fittings * Plug-in slat (wood) * Side/rear contour marking * Load certificate Code-XL * Portal door with double locking rods (external) * Side sliding curtain Lajdpfsxw Dqrex Affok * Forklift accessible * Fixed support legs * Prepared for rail loading * Lashing recesses * Lashing points * Perforated pallet stop bar Used roof curtain. Delivery: IMMEDIATELY AVAILABLE. New curtain. Freshly painted. Portal door with double locking rods (external). Technically ready for operation, superstructure and support legs newly painted. Undercarriage sandblasted and newly painted. UVV valid. BRAND NEW PAINT!!!. LASI CODE XL!!!. Dimensions are approximate. Offer is subject to prior sale, prices are net ex location D-59302 Oelde. For further details, please contact us by phone or email:

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Chassis, cranked * Special steel frame made of high-strength fine-grained steels, electric welded at connection points, well-dimensioned outer frame * 4-axle configuration. Wheel covers above the axles with spray suppression * All steel parts sandblasted * Side underrun protection mounted, made of anodized aluminum * Increased point load capacity approx. 30,000 kg over approx. 4,000 mm * Special construction in the cranked area for the largest possible low-bed length in combination with AluLeg drop supports instead of telescopic spindle landing gears, max. rear swing radius of the tractor unit approx. 2,100 mm Special body with rear stanchion extension * Self-supporting aluminum roof girder/profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stanchions expandable to approx. 4,200 mm Lasdpelthgusfx Affjk * Three sliding stanchions per side with rubber tension relief * Additional central stanchion latches in the roof girder and parking position, operable by pull cable and spring latch * Mechanical lifting roof with height adjustment, lifting roof height approx. 400 mm, operable from both sides or one side only, without opening the opposite side and doors * Additionally, height adjustment of approx. 480 mm in approx. 40 mm increments via height-adjustable stanchions * Front cover on the bulkhead for driving under tarp up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on each side, 450 mm pockets at bottom, four rows of single pockets above * In the high-bed only 3 rows of insertable slats. Intermediate distances evenly distributed Floor * Approx. 27 mm special water-resistant bonded beech multiplex boards, rough surface * Steel plate in the wheel arch area * Forklift suitable according to DIN ? standard * Flush outer frame surface Brakes * WABCO air brake system with EBS according to EC standard 71/320 EEC incl. PREV (Park Release Safety Valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and axle load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low loader design * Air suspension with lift and lowering function, total stroke approx. 230 mm * Third and fourth axle as friction-steered trailing axles with electric and mechanical lock Twin tyres * 235/75 R 17.5, -16 ply, incl. spare wheel holder, without spare wheel Paintwork * Chassis in RAL 3002 red, single colour * Central stanchions, axles KTL-coated black * Corner stanchions hot-dip galvanized * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Body single-colour in RAL shade Special equipment included * Air suspension in ECAS version, operation on the semi-trailer * Oversize signage front and rear, galvanized, stepless telescopic, with attached marker lights incl. sockets for revolving beacons (small plates) * Additional sliding roof frame release from outside * 4 stanchion adapters for special outer frame profile, for arbitrary locking of central stanchions * PVC sliding tarpaulins, color similar to RAL 9006 silver * Translucent roof tarpaulin, oversize and overheight specification, flat hooks, tarpaulin folds, closures with locking pawl/OCS * Rear left telescopic socket for warning beacon incl. light * Outer frame for machine transport with approx. 64 lashing poin

Condition: like new (used), functionality: fully functional, Year of construction: 2022, total length: 1,480 mm, total height: 2,040 mm, total width: 850 mm, overall weight: 360 kg, input voltage: 220 V, input current: 32 A, Mint condition XYZPrinting MfgPro230xS 3D printer from 2022. The device has hardly been used and is in excellent condition - perfect for anyone looking for a reliable and powerful 3D printer. Why the XYZPrinting MfgPro230xS? Ledpfot H I Tvex Affjak Outstanding print quality: With its precise printing technology and a resolution of up to 50 micrometers, the MfgPro230xS delivers impressive print results that meet the highest industrial standards. High printing speed: Save valuable time during production. The MfgPro230xS offers fast printing speed without compromising on quality. Large installation space: With a generous print volume of 230 x 230 x 230 mm, even larger projects are no problem. Ease of use: The simple operation and intuitive interface make this 3D printer easily accessible even for beginners. Reliability: Thanks to its robust design and high-quality components, the MfgPro230xS is extremely durable and reliable. With the XYZprinting MfgPro230 xS industrial 3D printing system, the most complex structures can be produced in one piece and without support structures using selective laser sintering in your workshop. Developed for professional use as well as for use at institutes and universities. Accessories: Sinterit FZ138 PHS Station Sinterit FZ101 ATEX Vacuum Cleaner 230V Sinterit Sandblaster SLS N2 Generator

Condition: good (used), Year of construction: 2007, -6Pcs. Spaleck Feeders . Type: SFLU 1950-300x3000 . Lasdpfx Ajxwn H Deffjk L X W: 3.000 x 1.950mm. . Year of Manufacture: 2007 . With 2 Pcs. Friedrich Unbalance motors of 2KW each, Springs and Frame with rubber springs. Feeders can be sandblasted and painted .

Condition: used, Year of construction: 2005, type of input current: three-phase, filter area: 286.8 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extractor, self-cleaning pneumatic vacuum filter for continuous operation from the renowned brand Donaldson Torit. Laodpfx Ajxxkzmsffek Suitable for plasma, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located after the filter on the clean side, significantly reducing explosion risk. Ultra Web filter cartridges are pneumatically cleaned with compressed air impulses during operation for high device efficiency. Fan power: 15 kW Capacity: 12,000 m3/h Connection diameter: 315 mm Filter cartridges: 12 pcs. Filter surface area: 286.8 m2 Year of manufacture: 2005 Equipped with 'SparkTrap' spark arrestor system. Stock number: 1044

Condition: good (used), Year of construction: 2014, Manufacturer: SGM Magnetics Type: T-VIS 100 Year of manufacture: 2014 With New Control-unit. See PDF-file below for more detailed information. Lasdpfx Asma Tt Ajffok Eddy Current Separator can be sandblasted and painted.

Condition: used, functionality: fully functional, “IFE SZ 1500 FS” for Sale Manufacturer: IFE Type: SZ 1500 FS Mach. No.: 51 B084-10-1 Width: 1.500mm Year of Manufacture: 2005 Decks: 5 2 Pcs. Unbalance Motors and Springs included. Will be overhauled, sandblasted and painted. Lasdpeu Tktdjfx Affsk

Condition: good (used), functionality: fully functional, “Hein Lehmann UK 1.2 – 3.0 ED” for Sale Lajdpfou Tkryjx Affek Manufacturer: Hein Lehmann Type: UK 1.2 – 3.0 ED Deck size: 1.200 x 3.000 mm. Included: – Electrical Motor – Cardan-shaft – Rubber Springs Vibrating screen can be sandblasted and painted.

Condition: like new (used), “Mogensen Sizer Type SL 2066” for Sale Find our complete stock on our website. Manufacturer: Mogensen Type: SL 2066 Mach. No.: D 5474 Year of Manufacture: 2001 Width: 2.000mm Decks: 6 Including 2 Pcs. Unbalance boxes, shafts, 15 kW / 970 RPM electrical motor and springs. Lajdpfsggfkxex Affsk Sizer is in good working condition, can be sandblasted and painted.