Dry ice Pelletizer and blast machine

Cold jet (Pelletizer, dry ice blasting) 651046M

Condition: used, Year of construction: 2004, operating hours: 2,130 h, ? Bobcat S130 ? 2130 operating hours Bwjdpfsxu Tnzsx Aa Esi ? Quick coupler ? Hydraulic connections ? Good condition, fully functional

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Nominal power input: 620 W Bedpfxjb A Hxuo Aa Ejwi -Mains connection: 230 V -Drill -div. drills -Suitcase -Weight: 5.5 kg

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, power: 160 kW (217.54 HP), input voltage: 380 V, warranty duration: 12 months, year of last overhaul: 2023, Equipment: documentation/manual, 1 pellet press make: Buhler DPAB inner diameter die 660 mm tread die 138 mm Press is equipped with 1 motor 160 KW . Press door is made of Stainless steel with overload valve in door. Bsdpfx Aasrah Evj Eswi 2 Roll press with 2 rolls on the press overhauled in dimple or racked version Press is complete with die lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts Also, all safety devices will be observed and appropriate switches on Friction protection , door switch and inspection hatches will be fitted.

Year of construction: 1988, condition: used, Compressor unit type 178 A CD E Delivery volume 4760 l min 9 bar operating pressure KW 30 Bedpfx Aasgw Dqpj Ejwi

Condition: used, Year of construction: 2009, container length: 40 ft, color: white, overall weight: 35,000 kg, empty load weight: 4,760 kg, loading space volume: 67.7 m³, loading space width: 2,290 mm, loading space length: 11,599 mm, loading space height: 2,545 mm, Equipment: cooling unit, Dear Sir or Madam Thank you for your interest! Bimicon Container Service GmbH has been offering refrigerated containers and storage containers of all kinds since 1996 - whether for sale or for hire. Of course, we also provide the corresponding service and parts trade for containers. If a special design is required, we will be happy to advise you and provide you with a suitable solution. CONTAINERTYPE: - 40 foot high cube, Carrier refrigeration unit, built 2009, freshly painted RAL 9003 (paint included) The pictures shown are only an example, the actual product may differ. DELIVERY CONDITION: - PTI OK (pre-trip inspection always new before delivery, checked by our specialist staff) - completely ready for use / ready to plug in - Wind and waterproof - CSC certificate (certified safety standard, this sticker regulates the safe use of containers) - New paintwork included TECHNICAL SPECIFICATIONS: Floor type: T-floor; Power consumption: 380/440 V, 32A, 50Hz / 60Hz with 5-pin CEE plug for shore operation; Bwsdpfx Aaei Imwcj Eji Interior: made of stainless steel/aluminum, food-safe; Average power consumption: 3-8 kWh; Adjustable temperature range: -25 ... +25 °C (ideal for heating and cooling); Refrigerant: R134A / R449A. DIMENSIONS: External dimensions length: 12,192 mm External height: 2,896 mm External width: 2,438 mm Internal dimensions length: 11,599 mm Internal height: 2,545 mm Internal width: 2,290 mm TRANSPORT SOLUTION: Do you need a transport solution? With pleasure! We will deliver your container by regular truck or crane truck and deliver it to you on site. Ask us for a quote! All refrigeration units are serviced and of excellent quality and performance. All prices are shown as net amounts. We look forward to hearing from you! BIMICON Container Service Your specialist from Hamburg Your trust in the quality of our Hamburg-based family business since 1996.

Condition: good (used), functionality: fully functional, Equipment: type plate available, 100,000 liter tank, used, double-walled, good condition, ready for immediate use, cleaned - certificate from specialist company available Length: 15.74 m Diameter: 2.90 m Height: 3.10 m - Transport height - Access ladder - Platform with railing - Firmly welded saddle feet Bwedeuzvyuopfx Aa Eji - Ventilation - Limit value transmitter - Dipstick - leak detector Loading and transportation can be offered. Only serious and serious inquiries will be answered: Name, e-mail address and telephone number.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations. Bodsg Ezarepfx Aa Eowi

Condition: good (used), Year of construction: 2020, Rotor 260 mm Feed opening approx. 800 x 1200 mm Rotor length approx. 800 mm Motor 18.5 kW Technical data upon request Required space approx. 2050 x 1550 mm Bwodpswzaizefx Aa Esi All information without guarantee

Year of construction: 1990, condition: new, Brand SKF Type 6202-Z/QE6 Year of manufacture: Unused Weight (kg) approx. 9400 gross / 8780 net Bwsdpfx Aaeqa Am Te Eei Number of pieces in stock 193.200 ( approx) Made in France Comments Contact us for min. quantity Verkoopcondities Contact us for min. quantity

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: Bjdpfx Ajq Nyzbsa Eswi - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.