Coordinate measuring machine

Mitutoyo QV-E202P1L-C Quick Vision ELF

Condition: used, Year of construction: 2010, functionality: fully functional, turning length: 300 mm, turning diameter over cross slide: 20 mm, turning diameter: 20 mm, spindle speed (min.): 10,000 rpm, spindle speed (max.): 10,000 rpm, spindle bore: 20 mm, rotational speed (max.): 10,000 rpm, power: 30 kW (40.79 HP), Turning and milling center complete with bar feeder LNS HYDROBAR MINI SPRINT bar loader(Maximum bar length 3,000mm) DMG MORI SPRINT 20-8 Control: Fanuc 310i Main spindle speed: 10.000 rpm Power: 5,5 kW torque: 14 Nm bar passage: max. 20 mm C1 axis: 0.001 travel Z1 axis: 80 mm Counter spindle speed: 10.000 rpm power: 5,5 kW torque: 14 Nm C2 axis: 0.001 Travel X2 / Z2 axis: 240 / 300 mm rapid traverse in X2 / Z2 axis: 40 m/min Tool carrier I (X/Y) Technology: Linear slide Internal machining: 6 stations Bjdpfx Asq Nmm Eof Todk tool holder: 20 mm External machining: 6 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck, ESX 16 Travel in X/Y axis: 50/350 mm Rapid traverse in X/Y axis: 40/30 m/min Tool carrier II (Y) Technology: Linear slide internal machining: 4 stations tool holder: 20 mm External machining: 4 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck , ESX 16 Travel in Y2 axis: 120 mm rapid traverse in Y2 axis: 40 m/min MACHINE DETAILS weight: 4200 kg Connected load: 30 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Chip management: chip conveyor Coolant management: Coolant pump Fire extinguishing system: Kraft + Bauer Oil mist extraction: Interface prepared Further equipment: Signal lamp

Condition: refurbished (used), Year of construction: 2025, operating hours: 16 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 200 mm, year of last overhaul: 2025, ambient temperature (min.): 16 °C, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 442 multi-sensor measuring device equipped with camera, laser and Renishaw probe system. Factory overhauled premium multisensor measuring center with guarantee and warranty rebuilt 2025. Incl. latest SW update, 18 months free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agency, worldwide. Online, optionally on-site demos with customer parts, application technology advice from accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, construction, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual education and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly via Profitech and without a financial institution. Measuring device individually configurable to customer needs Measuring range of all sensors: 400x400x200mm Dimensions: 800x1000x2000mm Weight: about 800kg max. loading weight: glass plate 30kg Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L= measuring length in mm) max. travel speed: 250mm/s including camera including lasers including LED ring light incl. new frame grabber (Eagle) including 2-monitor operation incl. CNC control and PC including new Optichek 3D 5.0 evaluation software Bsdsdy Uvmspfx Af Tedk

Condition: reconditioned (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, 3D coordinate measuring machine Mahr MS2VT used multi-sensor CMM with motor zoom and active vibration damping Factory overhauled premium multisensor measuring center with guarantee and warranty rebuilt 2022. Incl. latest SW update, 18 months free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agency, worldwide. Online, optionally on-site demos with customer parts, application technology advice from accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, construction, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual education and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly via Profitech and without a financial institution. Measuring device individually configurable to customer needs • Measuring range single sensor: 200x200x200mm • Dimensions: 900x750x950mm Bcym337udm • Weight: about 170kg Bedpfx Aedz Er Rjf Tsdk • Accuracy: E2 = 2.4 + L/150 [?m] • Refurbished 2024 • incl. USB camera with fixed focal length • incl. LED ring light • including calibration standard • incl. 2-monitor operation • incl. new Windows 10 • incl. Opticheck3D 5.0 ​​evaluation software (12 months free SW update) Manufacturer's icon image (sister device)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 04306, measuring range X-axis: 1,000 mm, measuring range Y-axis: 650 mm, measuring range Z-axis: 650 mm, workpiece weight (max.): 700 kg, total height: 2,734 mm, total width: 1,160 mm, total length: 1,680 mm, overall weight: 950 kg, input voltage: 230 V, ambient temperature (max.): 22 °C, ambient temperature (min.): 18 °C, Equipment: type plate available, !!!DISCOUNT!!! Motor-driven coordinate measuring machine with robust bridge design, mounted on air bearings. Included with the machine are a Renishaw 5-axis touch-trigger probing system PH20, compact touch probe TP20 with 1x SF module, Renishaw KIT 23 (stylus kit), TCR20 module changer (compatible with PH20 probe), UCCT5 interface kit for operation (joystick, cabling, servo end amplifier), UNITABLE control console, calibration sphere with holder (ceramic, diameter 25), PC table (120x80x72 cm), and Dell Optiplex 7010 (W10) with monitor and A4 inkjet printer. Bsdowu Uccspfx Af Tsdk

Condition: good (used), Year of construction: 2008, functionality: fully functional, total width: 1,700 mm, total length: 1,765 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, compressed air connection: 4 bar, Wenzel Smart Gear - gear and 3D coordinate measuring machine The machine is in very good condition and fully functional. It has been regularly serviced and well looked after. Machine data: • Machine dimensions L=1765mm W=1700mm H=2232mm Bedpfxsvvudke Af Tjdk • Max. rotary table workpiece diameter = 5 to 270mm • Measuring accuracy gear testing in accordance with VDI/VDE2612/2613 Group II • Max. rotary table load = 20 daN • Travel paths X= 500mm Y=450mm Z=400mm • Scanning probe - Renishaw SP600M • 7x SP600 change plate for probe included • Module measuring range 0.4 - 10mm • Active air damping of the machine • Year of manufacture 2008 • Accessories such as driver, reference ball etc. as shown • Jaw chuck D=80mm with inside and outside jaws • 24 inch monitor, mouse, keyboard The following software modules are included: Gear cutting software: • TMain - program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Calculated axis position determination • TGear – Spur gear measuring program • TGear – Head and root circle option • TWorm – Worm measuring program 3D software • Metrosoft CM 3.8

Condition: used, Year of construction: 2002, Technical details: x-travel: 505 mm y-travel: 405 mm z-travel: 405 mm measuring range X-axis: 505 mm measuring range Y-axis: 405 mm measuring range Z-axis: 405 mm compressed air: 0,4 MPa voltage: 100/120/220/240 V / Hz total power requirement: 700 Watt machine weight approx.: 0,5 t dimension machine xH: 1,1 x 1,1 x 2,185 m further features: -it is a linear measuring system with resolution 0.0001mm -measuring speed X/Y+Z-axes 430 mm/s Bodpfou S Izcox Af Todk -acceleration X/Y+Z-axes 980 mm/s² -measuring table made of granite, size LxW: 638 x 860mm, with workpiece clamp -max. tool size height max. 545mm weight max. 180kg Equipment: -Measuring probe Renishaw TP200 -Computer Fujtsu - Siemens Scenic P; protection class IP30 -without measuring probe -Software available (USB Stick) *

Condition: used, Barloader FMB Micromag 20/3200"C" Bdjdpswgpcusfx Af Tsk

Condition: excellent (used), The scope of delivery includes: Bdsdjmnnvaepfx Af Tok 01x lattice box, used Length: approx. 820 mm Depth: approx. 420 mm Height: approx. 420 mm Material: steel Material color: galvanized Wire Ø: approx. 4.50 mm Mesh width: approx. 54 x 54 mm Stackable: yes Stacking edge: 30 x 18 mm (W x H) Inner height: front approx. 185 mm | rear: approx. 390 mm Weight / piece: approx. 15.74 kg Note: half open in width Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Year of construction: 2015, condition: excellent (used), Mecasonic MCS2 CAB ultrasonic welding system - Very good condition - Year of manufacture: 2015 - 3 units available - CE declaration of conformity given - Condition: Incoterms EXW CH-4528 Zuchwil - Loading options available Bsdevvw Ekepfx Af Tjdk

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1-462-01, Dear interested party, You will find all the data on the plant in the photos and in the PDF files. Bedpfxjumk S Uo Af Todk The plant can be viewed by appointment. We will be happy to answer any further questions you may have.