Used Plastic Injection Moulder for sale (7,301)

Condition: excellent (used), Year of construction: 2005, Welcome We offer Isdjvyuvujpfx Ah Neht Thermoregulator - thermostat for injection molds - model HB THERM 160 U1 - series 4 Technical data: Manufacturer: HB - THERM Type: HB - 160U1 Year of production: 2005 Medium: Water Temperature: 160° C Heater power: 8 kW

Condition: good (used), WEINIG UNIMAT 23 9 SPINDLE SHORT INFEED TABLE 1: BOTTOM 7,5KW 2: RIGHT 7,5 KW 3: LEFT 7,5 KW 4: RIGHT 7.5 KW 5: LEFT 7,5KW 6: TOP 11 KW 7: BOTTOM 7,5 KW 8: TOP 7,5 KW 9: BOTTOM 7,5 KW 10: UNIVERSAL 7,5 KW 360° TILTABLE 15 x DRIVEN TOP FEED ROLLERS 5 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS PNEUM. POWERED HOLD DOWN ON 6+8 Ihsdpfx Aeyahubsh Not DIMENSION: APPR 5400 X 2000 X 1800 MM WEIGHT: APPR. 6500 KGS DUSTHOODS: 9 x 140 MM DIAMETER POSSIBLE TO INCREASE MOTOR SIZES AS NEEDED

Condition: used, 13 injection moulds/tools for 2 tables with 2 variants each, complete set Ihjdpfxoyahn Us Ah Njt

Condition: excellent (used), Year of construction: 2008, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, injection weight: 479 g, mold height (min.): 300 mm, Clamping force: 130t Year of manufacture: 2008 Injection weight: 475.9g Injection unit 1000 Screw diameter: 55 mm Specific injection pressure: 1904 bar Injection volume: 523 ccm Injection weight: 475.9 g Clamping force: 130 t Tool plate dimensions: 745 x 745 mm Ihjdpfx Ahjyagvws Njt Distance between tie bars: 470 x 470 mm Ejector force: 22.6 kN Mould height: 300 mm Opening stroke: 600 mm Maximum platen distance: 900 mm Weight: 8000 kg Year of manufacture: 2008 Control system: MC5 Equipment: - Accumulator - Euromap 67 interface - 2 x pneumatic valves - Hydraulic core on moving platen

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM300-1900CX Baujahr: 2011 Schließkraft: 300 Tonnen Holmabstand 630 x 630 mm Schnecken DN: 60 mm Max. Hubvolumen: 769 cm³ Spritzteilgewicht: 692 g/PS Steuerung: MC5 Ausstattung: 3 St. Kernzug Djbr Rvoxyrc Isf Nysul Schnittstelle Roboter 45- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät Ca. 51.000 Betriebsstunden Ihedpfex Tbfujx Ah Net

Condition: excellent (used), Year of construction: 2015, operating hours: 68,946 h, functionality: fully functional, In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Isdpfxsyab R No Ah Neht Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight: 6700 kg. Height: 2215 mm. Length: 4672 mm. Complete installation also available: Injection moulding machine + WITTMANN W818-2066 (2013) Robot + Conveyor belt Robot WITTMANN W818-2558 (2013)

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. Robust construction, proven VEM 7.5 kW motor, three-phase 400 V power supply. The machine features a large feed hopper, convenient service access, and an electrical control cabinet with emergency stop button. The installed low-speed three-phase motor ensures high shredding power with stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz Iodpfxovyumyo Ah Neht • Speed: 1500 rpm • Throughput suitable for medium and large injection moulding machines • German manufacturing quality • Sturdy frame and knife assembly Very good condition, mechanically inspected, ready for operation.

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Ihodpfx Ahoyab I Us Njt

Condition: ready for operation (used), Year of construction: 2015, operating hours: 45,109 h, General Data Machine weight 4400 kg Control Unit Brand FANUC Injection Unit Screw diameter 36mm Clamping Unit Clamping force 150-180t Ijdpfx Ahjx S Slco Nsht This FANUC Roboshot S150iA was manufactured in 2015. It's an electrical injection moulding machine with a closing force of 150-180 tons and a screw diameter of 36mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2007, clamping force: 5,000 kN, screw diameter: 85 mm, displacement volume: 2,128 cm³, injection pressure: 1,574 bar, injection weight: 1,937 g, mold height (min.): 450 mm, Battenfeld HM 500/3400 Injection Moulding Machine Clamping force: 500 t Year of manufacture: 2007 Injection shot weight: 1937 g Injection unit .../3400 Screw diameter: 85 mm Hnow A Nkox Ifpaou Dog Specific injection pressure: 1574 bar Injection volume: 2128 ccm Injection shot weight: 1937 g Screw L/D ratio: 22 Clamping system 500/... Clamping force: 500 t Platen dimensions: 1590 x 1470 mm Tie bar spacing: 1000 x 800 mm Mould height: 450 mm Opening stroke: 1150 mm Max. platen distance: 1600 mm Ejector stroke: 250 mm General data: Ihsdpfoyagvdsx Ah Nst Weight: 25000 kg Dimensions [L x W x H] [m]: 7.3 x 2.5 x 2.6 Equipment: - 1 x pneumatic valve - 2 x hydraulic core pulls - euromap 67 interface - bimetallic injection unit

Condition: ready for operation (used), Year of construction: 2004, operating hours: 21,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 40 mm, displacement volume: 217 cm³, injection pressure: 2,377 bar, ejector stroke: 150 mm, opening stroke: 600 mm, total length: 4,480 mm, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,000 kg, power: 18.5 kW (25.15 HP), Equipment: documentation/manual, In perfect shape. Iodpewlhb Tofx Ah Nsht

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 253-829, working width: 300 mm, planing height: 200 mm, spindle diameter: 50 mm, Weinig planer in perfect condition 5 spindles 2 bottom spindles Isdpfx Aox U U Dajh Njht 2 vertical spindles 1 top spindle Jointing systems on one top and one bottom spindle

Condition: excellent (used), Planer 9 heads Working width - 20 cm Ihedpfxjtrdwto Ah Nst Working height - 22 cm 5 pulleys in the table Heads 1 bottom 7.5 kW 2 right 11 kW 3 left 11 kW 4 right 11 kW 5 up to 11 kW 6 down 11 kW 7 up to 11 kW 8 down 11 kW 9 universal 11 kW PERFECT CONDITION!

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Ijdpfxeyab Nfj Ah Noht

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 1240 mm Measurements depth 4530 mm Measurements height 1910 mm Machine weight 3500 kg Injection Unit Screw diameter 36 mm Stroke volume 153 cm³ Injection pressure 173 MPa Screw speed 98 g/s Clamping Unit Clamping force 900 kN Ihjdpfxox D I Uuo Ah Njt Opening stroke 320 mm Max open daylight 700 mm Ejector stroke 100 mm Ejector force for / back 33 kN Media Oil tank 190 L This HAITIAN MA900 II eco was manufactured in 2016. It is a hydraulic injection moulding machine with a clamping force of 900kN and a shot volume of 153 cm3. Consider the opportunity to buy this HAITIAN MA900 II eco hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Catalogue number 7252 TECHNICAL DATA - Spindle diameter: 25 mm - Spindle working height: 170 mm - Spindle support - Interchangeable spindle - Spindle lock - Table adjustable up/down - Original fence - 4 speed settings + right/left rotation: 3000, 4500, 6000, 9000 rpm - Table dimensions: 980x980 mm - Motor: 3 kW - Dimensions (L/W/H): 1100x1000x1370 mm - Weight: 682 kg ADVANTAGES Iodpjx S Iknjfx Ah Noht – German production – Spindle support – Very good condition – Used milling machine Net price: 6,900 PLN Net price: 1,640 EUR at an exchange rate of 4.2 PLN/EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2019, operating hours: 14,600 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 570S2200-400/170 Baujahr: 2019 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 30 mm Max. Hubvolumen: 106 cm³ Spritzteilgewicht: 97 g/PS Schnecken DN 2: 25 mm Hubvolumen: 49 cm³ Ihsdjx S I Imepfx Ah Nst Spritzteilgewicht: 45 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit 6 - ACHS Roboter, Hersteller: MOTOMAN Baujahr: 2018 Förderband

Condition: used, Year of construction: 2018, 6 x Stork injection moulding machines Machine type Commissioning Age in months 4400-2150 19/12/2002 278 4400-2150 28/11/2012 159 4400-2150 14/08/2015 126 6600-5650 01/11/2011 171 9000-5650 30/05/2014 141 Ihsdpex Uymasfx Ah Njt 9000-5650 01/11/2018 87

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 134022-100, screw diameter: 60 mm, clearance between the columns: 710 mm, displacement volume: 913 cm³, injection weight: 684 g, mold height (min.): 375 mm, input frequency: 50 Hz, input voltage: 400 V, We are offering a Battenfeld HM300/1300 injection moulding machine in very good condition. The machine has been regularly serviced and maintained. Isdpfjxuz Nmsx Ah Neht

Condition: good (used), Year of construction: 1996, operating hours: 24,222 h, Description Type: BOY 80M Year of manufacture: 1996 Operating hours: 24,222 hours Screw (high wear resistance): 42 mm Max. injection pressure: 1,532 bar Max. shot volume: 200 cm3 Clamping force: 80 t Max. distance between tie bars: 410 mm Min. mould height: 250 mm Max. distance between plates: 725 mm Dimensions: 1,000 x 3,395 x 1,995 mm (L x W x H) Weight: 3,250 kg Options • Core pull • Including Procan control system • High wear-resistant 42 mm screw and cylinder • Colour contact (potential-free max. 5A) • Signal control for colouring Ijdpfjx Swn Nex Ah Noht

Condition: ready for operation (used), Year of construction: 1997, General Data Machine weight 190000 kg Measurements height 4090 mm Dimensions Machine Length 14760 mm Injection Unit Shot weight 9642 g Screw diameter 155 mm Iedpex Sz Erofx Ah Njht Clamping Unit Clamping force 31500 kN This Husky E 3150 RS 170 155 was manufactured in 1997. It features a clamping force of 31,500 kN, a screw diameter of 155 mm, and a shot weight of 9,642 g. Ideal for large-scale production, it has a stroke volume of 13,205 cm³ and an injection pressure of 1,636 bar. For more information about this machine, please reach out to us. Application Types Injection Moulding

Condition: excellent (used), Catalogue number 7207 TECHNICAL SPECIFICATIONS - Spindle diameter: 30 mm - Spindle working height: 120 mm - Interchangeable spindle - Spindle locking - Adjustable height (up/down) - Original cast iron fence - 4 spindle speeds + right/left rotation - Table dimensions: 1060 x 770 mm - Cast iron table - Motor: 4 kW - Dimensions (L/W/H): 1060 x 1050 x 1070 mm - Weight: 510 kg ADVANTAGES – German-made Ihedpfx Ajx Syaboh Not – Used milling machine – Very good condition Net price: 5,500 PLN Net price: 1,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,845 h, This KEYENCE Agilista-3200W was manufactured in 2016. It includes Modeling Studio software, printer setup materials, side covers, and an AC power cable. Ideal for those looking to enhance their 3D printing capabilities. Contact us for more information. Application Types Ihsdpfx Aex Stldsh Nst 3D Printing

Year of construction: 2002, condition: ready for operation (used), Injection Unit Ihjdox D Hxlepfx Ah Net Screw diameter 40 mm This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hours at 50,327 and automatic operating hours at 36,908. Consider the opportunity to buy this Krauss Maffei 150-520 C2 hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements height 470 mm Dimensions Machine Length 470 mm Ijdpsx D Ea Uofx Ah Njht Clamping Unit Clamping force 1100 kN This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding