Used Plastic Injection Moulder for sale (7,426)

Condition: new, Year of construction: 2021, V-hold 4-sided, 5-spindle planer, model VH-M 521 Tedpfx Afshq Rp Hj Tjf - width from 25 to 230 mm - height from 8 to 160 mm 1st from the bottom - 7.5 kW 2nd from the right -7.5 kW 3rd from the left -7.5 kW 4. from the top -11 kW 5. from the bottom - 7.5 kW - 5.5 kW feed from 6 to 36 m / min - revolutions 6500 / min - diameter of the spindles 40 mm - feed for short, opposite the right spindle - pressure in front of and behind the upper spindle. - manual table lubrication pump - machine weight 3100 kg In stock

Condition: used, Year of construction: 1990, Design: tiltable Swivel angle forward: 45 degrees Swivel angle backward: -5 degrees Table length: 2400 mm Table width: 1240 mm Extendable frame support: Yes Number of speeds: 4 Speeds: 3000/4500/6000/9000 rpm Speed selection: pole-changing motor Speed display: LED Spindle taper: MK 5 Spindle clamping length: 150 mm Cutter arbor diameter: 30 mm Todpfsxyad Tex Af Tjf Control panel position: top Spindle height adjustment: electric Spindle tilt adjustment: electric Spindle lock: yes Spindle brake: electric Suction diameter (fence): 125 mm Suction diameter (machine): 100 mm Spindle rotation direction: left/right Electric axes: spindle height & tilt & fence adjustment Table opening closure: insert segment Fence jaw version: integral/Aigner Fence jaws: 650 / 500 mm Fence adjustment: manual Digital fence display: yes Fence jaw setting: manual Power feed unit: yes Feed rollers: 4 Feed adjustment: fixed speeds Working height / feed table height: 850 mm Dimensions: 3000 x 1240 x 1900 mm Extraction diameters: 1 x 125, 1 x 100 mm Location: supplier

Condition: like new (used), Year of construction: 2012, I sell the veneer saw with moulding premilling router Manufacturer: Casati Macchine Modell LZ 3100. Year 2012. Cutting length 3100mm. Todpfsxawniex Af Tsf Very good condition. Available immediately.

Condition: reconditioned (used), Year of construction: 2013, Leadermac Speedmac 631 Working width: 310 mm, height: 150 mm. Spindles: 6 x 50mm (4x spindles with inverter speed control Tjdpfsxzthbjx Af Tof Bottom (22 kW) - 6000 rpm outboard bearing Right (15 kW) - (4000 to 9000 rpm) straight jointer Left (15 kW) - (4000 to 9000 rpm) straight jointer Top (22 kW) - 6000 rpm, outboard bearing, Top (22 kW) - (4000 to 9000 rpm), outboard bearing, straight jointer Bottom (22 kW)- (4000 to 9000 rpm), outboard bearing, straight jointer Feed speed 60m/min (Possible to increase). Top feed rollers 200mm (first 2) and 140mm others Connection: 380 V / / 50 Hz Full Documentation included.

Condition: ready for operation (used), Year of construction: 1998, Stock-No. 13610 Manufacturer Krauss Maffei Type of machine KM 110 – 390 C2 Tedjub S Ulepfx Af Tof Year 1998 Working hours h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 1100 kN Mould opening force, max. 70 kN Travel force movable platen opening 35 kN Travel force movable platen closing 28 kN Size of mould platens (h x v) 745 x 770 mm Distance between tie bars (h x v) 470 x 470 mm Mould opening stroke 600 mm Mould height min 300 mm Max. daylight 900 mm Hydraulic ejector - stroke 150 mm Ejector force 22/10 kN Injection unit: Screw diameter 35 mm Ls/D ratio 23 Injection pressure 2429 bar Stroke volume 156 ccm Shot weight (PS) 142 gr. Injection rate 123 ccm/s Screw speed 391 1/min Plasticising rate max. 22 g/s Nozzle pressure 84 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 18,5 kW Installed heating capacity 12 kW Adjustable barrel heating zones 5 Reservoir capacity 345 ltr. Dimensions and weights: Dimensions of the machine ca. 4,50 x 1,60 x 2,00 m Total machine weight 6000 kg Max. mould weight 1485 kg Accessories: - Anti vibration pads - 6 x Water flow Additional Options: - 2 x air valve - 2 x core pull - Robot interface according to Euromap 12 - Electrical screw drive - Accumulator

Condition: good (used), Year of construction: 2013, Ref. no.: 18494 Hersteller: ENGEL Type: Victory 50-200 Spex Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Todpfx Asxzq Sksf Tof Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs

Condition: excellent (used), Year of construction: 2011, clamping force: 1,300 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, injection weight: 289 g, mold height (min.): 300 mm, General Data Model: Krauss Maffei KM 130/750 CX Year of manufacture: 2011 Control system: MC5 Machine weight: 6,200 kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m ⚙️ Injection Unit Unit: .../750 Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 289.4 g Specific injection pressure: 2,336 bar Screw L/D ratio: 22.4 🔩 Clamping Unit Clamping unit: 130/... Clamping force: 130 t Platen dimensions: 745 × 770 mm Tie bar spacing: 470 × 470 mm Mould height (min.): 300 mm Opening stroke: 600 mm Max. daylight: 900 mm Ejector force: 22.6 kN Ejector stroke: 150 mm Todpfsxzq Dgjx Af Tef 🧰 Additional Equipment - Hydraulic core - Pneumatic valve 4-section rotameters (2 pcs.)

Condition: like new (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, total length: 4,110 mm, total width: 2,650 mm, total height: 4,565 mm, overall weight: 22,000 kg, The nearly new used ARBURG Allrounder T offered here, with a clamping force of 2000 kN, features a 2-station rotary table that alternates 180° forward/back. With only 8,344 operating hours, the machine is in excellent condition. Tedpsxx R Iajfx Af Tsf

Condition: used, functionality: fully functional, HYDRAULIC VALVE Tedpsxzphwofx Af Tof All our items have been inspected by the technical department.

Condition: excellent (used), Year of construction: 2008, operating hours: 58,000 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 20 bar, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 100 mm, overall weight: 3,900 kg, Equipment: documentation/manual, Due to recent developments - Tax notice and advantage for used machines From 01.07.2025, used machines may also benefit from a special depreciation allowance of 30% per year. In addition to the more favorable price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth Booster (§ 7 Paragraph 2 German Income Tax Act - draft) Engel E Max cleanroom machine, year 2008, including GEKU SR 500 ST linear robot The machine has operated just under 58,000 pump hours in automatic mode. The machine comes from a well-known pharmaceutical manufacturer, which means both the machine and the handling system were subject to very strict maintenance management and are in excellent condition. We provide a commissioning warranty for every machine purchased from us. Todpfx Afst A Ufws Tsf

Condition: ready for operation (used), Year of construction: 2008, operating hours: 3,200 h, Injection Unit Tedsw Ailbjpfx Af Tjf Screw diameter 60 mm Injection pressure 2006 bar Clamping Unit Clamping force 200 tons expandable to 300 tons Opening stroke 700 mm Mould height max 350 mm Additional Equipment Hydraulic ejector Side air valve Robot interface 4-zone mold temperature control system This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: like new (used), Year of construction: 2023, INJECTION MOLDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Year of manufacture: 2023 Technical Specifications Clamping Unit: Clamping force: 1000 kN – ensures high process stability Rotary table diameter: 1300 mm – optimizes production cycle Usable mold mounting area: 800 × 590 mm Minimum mold height: 300 mm Maximum daylight between platens: 585 mm Injection Unit (3 interchangeable cylinders): Cylinder Ø 30 mm: 83 cm³ at 2200 bar Cylinder Ø 40 mm: 140 cm³ at 1250 bar Todpjxzklqjfx Af Tjf Cylinder Ø 20 mm: 36 cm³ at 2500 bar Additional equipment: - 2 hydraulic cores – for operating complex molds - 2 pneumatic valves – for additional mold functionalities - GK control – enables direct control of 3 heating zones from the machine - SELOGICA DIRECT control system – precise process control, capability for custom sequence programming Year of manufacture: 08/2023 Pump operating hours: 1062 h Detailed Description The machine is fitted with a hydraulic system featuring two energy-efficient variable displacement pumps and a servo valve for precise pressure and movement control. The hydraulic power unit is mounted outside the injection molding machine’s frame, significantly reducing operational noise. Thanks to precision filters and low oil volume, the oil change interval is extended to 20,000 hours. T2 servo-regulation technology includes: - Two adjustable variable delivery pumps - Programmable, adjustable, and stabilized clamping force - Programmable and manually adjustable nozzle contact force - Capability for simultaneous (parallel) movements (nozzle, ejector, cores) The machine is also equipped with: - Additional continuous oil filtration and cooling system (bypass circuit) - AES system – automatic optimization of main drive operation, reducing energy consumption by smoothly adjusting pump speed according to machine load (for 15–75 kW motors, 380–480V, 50–60 Hz). Required option: 525/02 – adjustable machine cooling circuits Tool plates are equipped with a central injection position and a Ø 125 mm centering hole.

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Equipment: documentation/manual, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones Todpfx Afjxzqyzj Tjf - 8-section rotameter

Condition: used, Year of construction: 2001, Technical details: screw size: 105 mm injection shot weight in Polysterol: 4.940 g/PS closing pressure: 9000 kN weight of the machine ca.: 19 t Tjdjtuncvspfx Af Tsf Out of serial production Machine and Robot condition regularly checked by EngelCare program Linear robot on machine was fully refurbished in 2021 *

Condition: good (used), Year of construction: 2002, operating hours: 7,192,484 h, functionality: fully functional, machine/vehicle number: 58985, Technical details Clamping force: 3500 kN Size of mould platens (h x v): 1100 mm x 1016 mm Distance between tie bars (h x v): 800 mm x 710 mm Mould opening stroke: 670 mm Mould height min: 375 mm Mould height max: 710 mm Max daylight: 1380 mm Hydraulic ejector - stroke: 250 mm Ejector force forward/backward: 81 kN Injection unit Screw diameter: 55 mm Tsdpfx Afexzdnro Tsf Ls/D ratio: 22 Injection pressure: 2041 bar Stroke volume: 653 ccm Shot weight PS: 594 g Screw speed: 253 1/min Plasticising rate max: 52 g/sec

Condition: excellent (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, Technical Details Tedpfot A Ui Ajx Af Tof Manufacturer: Engel Model: V 330H/80V/130 Combi Cleanroom Year of manufacture: 2006 Operating hours: 33,107 h Screw diameter: 25/22 mm Machine weight: 10,600 kg Additional equipment included: GEKU SR 500 ST robot Safety enclosure Rotary table The machine has run nearly 33,107 hours in automatic mode. Current note – Tax advice and advantage for used machines From 01/07/2025, used machines can also be depreciated for tax purposes with a special annual depreciation rate of 30%. In addition to the more favorable price compared to a new machine, you can claim the same depreciation benefits as for a new machine. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E)

Condition: ready for operation (used), Year of construction: 2018, General Data Tjdpfxoxx Dy Ao Af Tsf Measurements width 1560 mm Measurements depth 5980 mm Measurements height 2190 mm Machine weight 8900 kg Injection Unit Screw diameter 45 mm Clamping Unit Clamping force 1900 kN Additional Equipment Air valves: 2 This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, clamping force: 350 kN, screw diameter: 28 mm, injection pressure: 1,577 bar, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this high precision BOY 35M injection moulding machine. The 30 & 35 machines are a rare find on the used market as they offer a versatile four tie bar setup with good platen areas, from a footprint not much larger than that of a BOY 22. If you’re looking for the most versatile little machine, this has to be worthy of consideration. Fitted with the Procan MD controller and 28mm diameter screw, which gives a shot weight of 55.8 (PS)g. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Tsdpfx Aexxlmdsf Tjf

Condition: good (used), Year of construction: 2004, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 80 mm, injection pressure: 2,500 bar, For sale: Injection moulding machine Arburg 820S 4000-2100, serial no. 195746. The item is in good condition. Technical specifications: Year of manufacture: 2004 Injection unit: 2100 Screw diameter: 80 mm Shot volume: 1407 cm³ Clamping force: 4000 kN Tie bar spacing: 820×820 mm Platen size: 1171×1171 mm Maximum mould height: 850 mm Maximum opening stroke: 700 mm Maximum distance between platens: 1550 mm Ejector force: 100 kN Ejector stroke: 250 mm Maximum weight of moving mould half: 4500 kg Hydraulic pump drive power: approx. 55 kW Total installed power: approx. 88.9–96.2 kW Number of heating zones: 6 + nozzles Net weight of machine: 22,700 kg Dimensions (L × W × H): approx. 8.0 × 2.3 m Control system: SELOGICA Machine cycles: 4,157,591 Pump hours: 69,800 Auto mode: 58,556 Transport and loading can be organised Europe-wide on request, at an additional cost. Prices excl. VAT Tedoxxi Nvjpfx Af Tjf Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine purchase & sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing business? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 193818, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, injection pressure: 2,080 bar, injection weight: 297 g, ejector stroke: 225 mm, opening stroke: 650 mm, plate width: 685 mm, plate height: 685 mm, installation height: 250 mm, total length: 5,500 mm, total width: 1,600 mm, total height: 2,160 mm, overall weight: 6,630 kg, number of injections: 1, input current: 125 A, Equipment: documentation/manual, All items are sold as used and untested unless otherwise specified. Only the injection moulding machine is offered for sale, without handling device or accessories. Please pay attention to the item description. Todpfx Ajxy Iugsf Tef

Condition: excellent (used), Price: €50,000 Package 11 ARBURG injection moulding machines Models - Allrounder: 270-S-500-60 270-M-500-90 270-S-400-70 221S-350-100 Tsdpfxoxw U Uhj Af Tsf 370S-500-100 370S-700-70

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, screw diameter: 2,518 mm, Arburg 520S 1600 290/70 Two-Component Injection Moulding Machine 12.3 million cycles 86,565 hours manual mode 78,099 hours automatic mode Injection unit 1: horizontal, 290 diameter, max. 71 cm³, screw diameter 25 mm Injection unit 2: vertical, 70 diameter, max. 21 cm³, screw diameter 18 mm Opening stroke: 925 mm Electric index rotation 12-zone integrated hot runner system 3x core pull 2x air blast (needle shut-off valve control) Various customer-specific inputs and outputs Interfaces: Tedpfx Asxzix Asf Tjf - ALS - Temperature control units - Dryers Multilift H 6kg handling unit: - 2x vacuum circuits - 5x double-acting grippers - Z-axis servo, 800mm - C, G, X, and B axes pneumatic - Various customer-specific I/O (gripper monitoring, etc.) At Maschinen-Handel, every machine purchased from us comes with a commissioning guarantee. This provides you, as the customer, with maximum security in the used machine market. Important notice! – Tax information and benefit for used machines Starting from 01.07.2025, used machines will also qualify for a special tax depreciation of 30% per year. In addition to the lower price compared to new equipment, you can claim the same depreciation rates as for a new machine. Keyword: Growth Booster (§ 7 section 2 EStG-E)

Year of construction: 2013, condition: ready for operation (used), Injection Unit Screw diameter 30 mm Stroke volume 85 cm³ Injection pressure 2000 bar Additional Equipment Todpjxxndfofx Af Tof Machine handling is included. This Arburg Allrounder 270 H 350-70 was manufactured in 2013. It features a screw diameter of 30 mm, a maximum injection pressure of 2000 bar, and a nozzle lift-off stroke of 210 mm. With 20,000 operating hours, this hydraulic injection moulding machine includes machine handling. Consider the opportunity to buy this Arburg Allrounder 270 H 350-70 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine. complete maintenance by manufacturer until current Tedpfx Ash Dr E Tof Tjf Injection molding machine: Manufacturer / Type: Krauss-Maffei KM80 220 C2 Serial No.: 61006272 year of construction: 2004 Control system: MC4 Clamping unit clamping force: 800 kN /80 tons tie bar distance: 405 x 405 mm Mold installation height min.: 250 mm platen distance max.: 750 mm Clamping platens standard: 610 x 610 mm ejector stroke: 150 mm core pull: 1x pcs. Injection unit Injection unit / cylinder ø30 mm Shot weight max. (ø30):: 77g/hp Injection flow: 73cm³/sec Spec. injection pressure: 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & Weights Weight with control cabinet: 3,8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Year of construction: 2007, condition: ready for operation (used), This Krauss Maffei 110-750 CX was manufactured in 2007. It is a hydraulic injection moulding machine with significant operating hours, indicating robust performance over the years. Unit 1 has 63,972 hours, and Unit 2 has 69,878 hours. Consider the opportunity to buy this Krauss Maffei 110-750 CX hydraulic injection moulding machine. Contact us for more information about this machine. Tjdpfx Asxczthef Tjf Application Types Injection Moulding