Used Plastic Injection for sale (6,459)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection weight: 359 g, mold height (min.): 300 mm, Year of manufacture: 2014 Clamping force: 200 tons Light pillar spacing: 570 x 570 mm Screw diameter: 50 mm Injection volume: 392 cc Injection weight: 359 g Lasdpfx Afezmg A Astod Complete equipment: Robot, conveyor belt, hot runner controller, etc.

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced Ljdpfx Aov D Nxleftjad 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection Lajdpszma Avofx Aftod

Condition: like new (used), Year of construction: 2015, operating hours: 47,247 h, functionality: fully functional, machine/vehicle number: 230999, clamping force: 500 kN, screw diameter: 35 mm, displacement volume: 115 cm³, injection weight: 105 g, Equipment: documentation/manual, Here, as a dealer of injection molding machines, we offer the following well-maintained used injection molding machine: Of course, we also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 320C 500-170 Serial Number: 230999 Year of Manufacture: 2015 Operating Hours: 47,247 h Control System: Selogica Dimensions L/W/H: 3.12 x 1.43 x 1.99 Weight: 2300 kg Functionality: fully operational Condition: very well maintained Extras: 1x core pull Thermoplastic screw/cylinder, 35 mm, highly wear-resistant 1 x blow-out Coloring interface - extended monitoring - extended movement sequence - extended clamping - production control - job change - complete documentation and software (on CF card) German language - from first owner - origin Germany - regular maintenance by the manufacturer and previous owner Visible peripheral devices are not included in the offer - only if they are explicitly mentioned. Injection unit Screw diameter: 35 mm Injection weight: 105 g/PS Injection pressure: 1,470 bar Injection volume: 115 ccm Clamping unit Clamping force: 50 tons / 500 kN Tie bar spacing: 320 x 320 mm Platen size: 446 x 446 mm Tool installation height: 200 mm Max. distance between platens: 550 mm Ejection stroke / force: 125 mm / 30 kN Clamping unit: hydraulic Motor power: 11 kW Heating power: 9.4 kW Total power: 21 kW The machine is immediately available in our warehouse in Hanover/Germany and has been tested. ✔ Warranty Warranty until first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to your location against reimbursement of freight costs - worldwide delivery possible Immediately available in our warehouse in Hanover/Germany For information about the machines we offer and our company: - we only sell machines that we have purchased ourselves from current production, from our warehouse in Hanover. Lodov U Tl Dopfx Aftead - all offered machines are checked and tested before dismantling. - we do NOT sell insolvency goods - we are NOT a broker dealing with third-party property. - all offered machines come from successful companies for which maintenance and care are a matter of course. - all offered machines are in our warehouse and can be inspected while powered on.

Condition: used, Year of construction: 2010, machine/vehicle number: PR28, Used SACMI OIMA 350T injection molding machine - Year 2010Technical Specifications & Performance DataThis injection molding machine for PET preforms is a high-output cell engineered for beverage production and industrial packaging applications. Manufactured by OiMA, it combines robust clamping performance with precise injection control and a complete set of auxiliaries for reliable second hand operation within a used bottling line context.Manufacturer: OiMA S.p.A.Model: 6500.350Application: PET preform production for beverage packagingClamping force: 350 tonInjection volume: 4500 cm³ per 100 MPaInstalled power: 436.58 kWPower supply: 400 V, 50 HzMachine mass: 20,000 kgPress year: 2014Mold: SACMI PPM 072 H, 72 cavities, 34 g preforms, neck type Alaska Blue PRE 342Year: 2010Mold temperature: 8–12 °CMold mass: 9,720 kgAuxiliaries included: Sytrama REV 156 PET take-out robot; Plastic System dehumidifier; Plastic System hopper H6000H; Plastic System mold-area dehumidifier DSH 2004 MIC DISP; conveyor; palletizing systemMaterial processed: PETAdvanced Automation & Control SystemsThe cell integrates a Sytrama REV 156 PET robot for automatic take-out and part handling, supporting stable cycle times and consistent product quality. The machine is equipped with an electric charging unit and hydraulic accumulators for fast, repeatable injection phases. Operator-friendly controls and interlocked safety guards help streamline setup and routine operation.Automated take-out and transfer via Sytrama robotAccumulator-assisted injection for stable, fast cyclesIntegrated dehumidification and material handling for resin conditioningElectrical specifications: 400 V, 50 HzEngineered for quick, repeatable mold changes and efficient maintenance accessProduction Line Integration CapabilitiesThis injection cell can operate as a standalone preform production unit or be integrated upstream of stretch blow molding in a PET production line. The included dehumidifiers, hopper loader, conveyor, and palletizing system simplify in-plant logistics and align with broader bottling equipment and packaging machinery workflows.Standalone or inline operation with PET packaging linesDehumidification and hopper loading optimize PET resin preparationConveyor and palletizing system support downstream handling and warehousingIdeal for beverage production environments targeting consistent preform supplyMachine Condition & Maintenance HistoryThis second hand injection molding machine is presented in operational condition and ready for immediate use after standard site preparation and commissioning. The core press is year 2014, with the SACMI mold and auxiliaries from 2010, providing a balanced mix of robust mechanics and proven proce... Lodpfx Afszktdbjtsad

Condition: good (used), Year of construction: 2007, CPU boards for injection molding machines Arburg Multronica Boards manufactured approx. 2007 Ledpozl Tv Tofx Aftoad Available: 3 units

Condition: good (used), Year of construction: 2009, Arburg parts Year of manufacture approx. 2009 Lasdpfezl Tcyex Aftsd

Condition: ready for operation (used), Year of construction: 1997, operating hours: 113,881 h, functionality: unexamined, machine/vehicle number: 32833, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 11,500 kg, For sale is a used machine from a site closure. Ledpfx Aozl S Rpsftead Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: good (used), Year of construction: 1994, Arburg Thermonic Temperature controller (model SI FF 10 G250/300) The device features an analog rotary knob for setting the target temperature in Celsius and Fahrenheit (range 50°C to 450°C), as well as three LED displays for monitoring the temperature deviation. Laedpfx Aszl Sbneftsd

Condition: used, Year of construction: 1999, 4x electronics circuit boards - Arburg Year of manufacture approx. 1999 Lodpfxjzl R Nqe Aftsad

Condition: used, Year of construction: 1998, machine/vehicle number: 145893, clamping force: 350 kN, screw diameter: 25 mm, clearance between the columns: 221 mm, displacement volume: 56 cm³, injection pressure: 2,500 bar, For sale is an Arburg injection molding machine, type Allrounder 221-75-350. The machine is in used condition. Technical data: ARBURG Maschinenfabrik Hehl & Söhne GmbH & Co.KG Model / Type: Allrounder 221-75-350 Machine No. / Serial Number: 145893 Year of Manufacture: 1989 Machine Weight: 970 kg Ledpfszki N Tex Aftjad Clamping Force: 350 kN Clear Tie Bar Spacing: 221 mm x 221 mm Platen Dimensions: approx. 342 mm x 342 mm Opening Stroke / Stroke: 275 mm Tool Installation Height: 150 mm / 300 mm Max. Platen Distance: 425 mm Injection Unit: Screw Diameter: 22 mm / 25 mm Max. Injection Volume: up to 56 cm³ Max. Shot Weight: up to 50 g Specific Injection Pressure: up to 2500 bar Electrical Connection Values & Power: Operating Voltage: 380 V (3 phases) Mains Frequency: 50 Hz Heating Power: 3.46 kW Pump Motor: 7.5 kW Total Power / Total Connected Load: 11.0 kW Upon request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2004, machine/vehicle number: PR25, Used NEGRI BOSSI 850T injection molding machine - Year 2004Technical Specifications & Performance DataThis NEGRIBOSSI U850 Injection Molding Machine delivers high-tonnage performance for large-shot applications and precision molding. Configured with a 100 mm screw, it offers robust shot volume and clamping power, making it suitable for industrial packaging components and beverage production accessories. Manufactured in 2004, the machine integrates proven NEGRIBOSSI engineering with an EUROMAP 8500H-6500 injection unit and a user-friendly HMI.Model: U850 (EUROMAP 8500H-6500)Clamping force: 8500 kNScrew diameter: 100 mmShot volume: 3925 cm3Shot weight (PS): 3570 gMaximum shot weight: 3750 gInjection pressure: 1670 barBetween tie-bars (H x L): 1140 x 1020 mmPlaten size (H x L): 1670 x 1580 mmMould height (min–max): 400–1100 mmOpening stroke: 1200 mmEjector stroke: 399 mmHydraulic operating pressure (mould/injection): 180 barMotor-pump power: 74 kWPlasticizing power (100 mm): 37 kWHeating power (100 mm): 37 kWTotal installed power (100 mm): 198 kWCore pullers: 2Robot interface: YesAir circuit: 1Electric dosing motor: YesMachine dimensions (L x W x H): 11550 x 2600 x 2305 mmMachine weight: 39600 kgAdvanced Automation & Control SystemsThe U850 features a modern HMI with clear operational menus and diagnostic pages to streamline setup and production. The machine supports robot interface connectivity for automated part removal and downstream handling. Electric dosing and precise plasticizing power ensure stable melt quality and repeatable cycles. Safety controls and process monitoring are integrated through the control interface to maintain consistent, high-quality output.HMI control: multi-page interface with technical characteristics viewAutomation: robot interface enabled for pick-and-place and cell integrationPower architecture: motor-pump 74 kW; plasticizing and heating 37 kW each (100 mm configuration)Process monitoring: live readouts for temperature, times, positions, and pressuresProduction Line Integration CapabilitiesThis injection molding machine integrates seamlessly into industrial packaging and beverage production environments, supporting automated cells with robots, conveyors, and quality control stations. Its robust clamping unit and generous tie-bar spacing accommodate multi-cavity molds for components used in used bottling line refurbishments and second hand production setups.Compatible with automated part removal robots and conveyors Ljdpfx Ajzkht Djftead

Condition: new, Year of construction: 2014, machine/vehicle number: PR27, Used HUSKY 48 cavity injection molding machine - Year 2014Technical Specifications & Performance DataThis Husky Injection Molding Machine is engineered for high-efficiency PET preform production, delivering robust performance and precision for industrial packaging and beverage production environments. Its substantial clamping force and optimized injection unit support demanding multi-cavity molds, ensuring consistent part quality and cycle stability. Ideal for integration upstream of stretch blow molding in PET bottling equipment, it provides the throughput and reliability required for both new installations and upgrades to a used bottling line or second hand production cell.Manufacturer: Husky Injection Molding SystemsModel: HPET 230E-RSE95D-95Year of manufacture: 2014Production output: 448 kg/hMold cavities: 48Clamping force: 2254 kNMax. mold stroke: 550 mmMold shut height: 250–660 mmMax. ejector stroke: 150 mmDistance between tie bars: 610 × 610 mmScrew diameter: 95 mmScrew stroke: 375 mmMax. screw speed: 120 rpmMax. injection pressure: 1170 barInjection capacity: 2658 cm³Screw L/D ratio: 25:1Melt channel diameter: 22 mmPreform specs: 48-cavity mold; 28 g (30/25 neck) and 26.5 g (29/25 neck)Footprint (area required): W 800 cm × L 2200 cmAdvanced Automation & Control SystemsThe system features an industrial control panel designed for stable, repeatable operation and safe maintenance access. Electrical architecture supports multi-phase operation with clearly rated protection, ensuring reliable performance across production shifts.Power supply: 3 ph, 400 V, 50 HzConnected load: 200 kW; 358 ASystem wiring: 3PH + N + PEShort-circuit current rating (SCCR): 10 kALargest motor (panel rating): 10 ALargest heat load (panel rating): 39 AAir pressure: 10 barIntegrated take-out device interface: compatible with automated preform handlingSafety: CE-marked control system with emergency stop circuits and guarding provisionsProduction Line Integration CapabilitiesPurpose-built for PET preform manufacturing, this injection molding system integrates seamlessly with upstream resin handling and drying and downstream quality inspection, storage, and logistics. It is an excellent fit for industrial packaging and beverage production, feeding PET blow molding machines on PET lines within modern bottling equipment layouts.Operation modes: Standalone cell or integrated in automated production linesDown... Lasdpfx Afszkhtwjtod

Condition: excellent (used), Year of construction: 1998, Min. tool mounting height: 200 mm Max. plate distance: 550 mm Column spacing: 270 x 270 mm Screw diameter: 15 mm Clamping force: 400 kN Includes temperature control unit Includes handling robot The machine is in very good condition and is operational. Lajdpfxszkfh So Aftod

Condition: excellent (used), Year of construction: 2008, Min. tool mounting height: 200 mm Max. tool mounting height: 350 mm Max. opening stroke: 380 mm Screw diameter: 22 mm Clamping force: 800 kN Tie bar spacing: 470 x 420 mm Delivery does not include attachments/accessories. Ljdpfszkfd Tex Aftead The machine is in very good condition and is powered on.

Year of construction: 1994, condition: ready for operation (used), A hydraulic Battenfeld plastic injection molding machine is offered. Clamping force: 1000kN, screw diameter: 40mm, shot weight: approx. 183g, mold mounting platens X/Y: 700mm/700mm, shot volume: 201cm³, max. injection pressure: 1968bar, max. screw speed: 290rpm, nozzle contact force: 79.2kN, machine cycles: approx. 1985087, operating hours: approx. 53578h, control system: Battenfeld UNILOG 4000. Dimensions: approx. 5440mm/1550mm/2300mm, weight: approx. 5060kg. Motor, pump and inverter renewed in December 2009. An on-site inspection is possible. Lajdpfxozl Enho Afted

Condition: excellent (used), Year of construction: 2013, clamping force: 3,500 kN, screw diameter: 60 mm, clearance between the columns: 720 mm, displacement volume: 763 cm³, injection pressure: 1,905 bar, injection weight: 695 g, mold height (min.): 350 mm, Basic data Model: 1450 injection unit / 350 t clamping force Year of manufacture: 2013 Control system: NC5 Injection unit Screw diameter: 60 mm Injection volume: 763 cm³ Injection shot weight: 695 g Specific injection pressure: 1905 bar Screw L/D ratio: 20 Clamping unit Clamping force: 350 t Lasdpozl D Ersfx Aftsd Tool plate dimensions: 1040 × 1060 mm Distance between tie bars: 720 × 720 mm Mold height: 350–745 mm Opening stroke: 730 mm Maximum plate distance: 1475 mm Ejector stroke: 200 mm Dimensions and weight Dimensions (L × W × H): 7.64 × 2.01 × 2.27 m Weight: 15,540 kg Tooling and equipment 4 × hydraulic core 12 heating zones for the mold 2-circuit pneumatic cascade control Indunorm quick couplings 2 pneumatic valves on the moving platen Increased pump drive power activeDrive – pump with adjustable speed activeProtect – active mold protection Wear-resistant screw Bimetallic cylinder Injection with p+v regulating pump (closed loop) EUROMAP 67 robot interface

Condition: good (used), Manufacturer: Arburg Year of manufacture: 1998 Machine number: 174514 Lsdjzl Dycopfx Aftoad Type / Model: 420-1000-350 Operating hours: 65,000 h Automatic operating hours: 57,000 h Clamping force: 100 t Opening stroke: 500 mm Control system: Selogica Tie bar spacing: 420 x 420 mm Platen dimensions: 570 x 570 mm Minimum tool height: 250 mm Maximum distance between platens: 750 mm Screw diameter: 40 mm Maximum injection volume: 182 cm³ Shot weight: 153 g Holding force: 5 t Connection: 33.4 kW Accessories/Equipment: 2 core pulls, handling connection, pneumatic air valve Condition: good Weight: 3.43 t Dimensions: 3,200 x 1,100 x 1,800 mm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Gas injection and closure machine for nitrogen gas flushing of round cans for powder and coffee. Technical specifications as per original manufacturer: - Diameter range: 56 mm – 86 mm - Height range: 45 mm – 200 mm - Production capacity: up to 50 cans per minute - Number of fumigation heads: 10 - Number of seaming heads: 1 Lodpfsw I Ax Rjx Aftoad

Condition: ready for operation (used), Suitable for: - Food: fluid and viscous products such as sauces, tomato sauces, pâtés, mayonnaise, ketchup, dressing - Chemicals: pesticides, detergents, fertilizers, herbicides, paints, varnishes - Cosmetics: shampoos, creams, shower gels, oils, lotions Piston filler with 4 volumetric filling heads, with upward dispensing Lasdpfx Aeyxpqcefted Manual cap placement by operator Automatic capping unit Incl. 80-liter heated tank with mixer Up to 2,000 bottles per hour

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, For sale is an injection moulding machine from the manufacturer Arburg, model 520 C 2000-800, year of manufacture 02/2006. Laedpfew Hpwrox Aftjd The machine is in a very good, well-maintained condition. An on-site inspection is possible at any time by prior telephone arrangement.

Condition: excellent (used), Year of construction: 2012, operating hours: 34,000 h, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 420 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, plate width: 670 mm, plate height: 670 mm, overall weight: 3,900 kg, Equipment: documentation/manual, warehouse no.: 503569 manufacturer: KRAUSS MAFFEI type: KM 80-750 CX controller: MC6 year of construction: 2012 operation hours: 34000 h clamping force: 800 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 670 x 670 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2336 bar equipment included: screen text german core pulling hydraulically 1x machine incl. Handling machine without belt conveyor machine without hopper loader Anti vibration mounts technical data robot-system Lodoyvz Izjpfx Aftsad handling type: integrierter Linearroboter manufacture: Krauss Maffei controller: LRX 100 year of construction: 2012 handling weight: 10 kg operation hours: 3400 h X axis: 550 mm Y axis: 1200 mm Z axis: 1500 mm screen-text: deutsch measures of machine l x w x h: 4.5m x 1.5m x 2m total weight: 3900KG

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: X55766, clamping force: 5,500 kN, screw diameter: 98 mm, clearance between the columns: 830 mm, displacement volume: 3,394 cm³, 550-ton machine in good condition. Lodpfx Afszlt Aaetsad

Year of construction: 2022, operating hours: 2,000 h, condition: like new (used), functionality: fully functional, We offer this like-new Ulmatec filter unit, model FES 20-35-4, for dry dust extraction of aluminum/plastic, manufactured in 2022. Ledpszlr Dcefx Aftjad Manufacturer: Ulmatec Model: Filter unit FES 20-35-4 Year of manufacture: 2022 Condition: like new Type: Dry dust extraction for aluminum/plastic Category No.: 376 If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66931, clamping force: 6,600 kN, screw diameter: 98 mm, clearance between the columns: 900 mm, displacement volume: 3,885 cm³, injection pressure: 2,100 bar, This machine underwent a complete overhaul and was retrofitted in 2023. Ljdozlrc Sspfx Aftoad