Used Pillar Drill for sale (6,012)

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm throat: 320 mm bore stroke: 250 mm spindle taper MT: MK 4 spindle speed:: 63 - 710 / 8step U/min feed: 0,07; 0,13; 0,254; 0,42 mm/U Distance spindle/table max.: 600 mm table clamping surface:: Ø 450 mm table rotating: 360 ° clamping table - swivable: ja Grad drill table adjustment: 600 mm column diameter: 215 mm Kdedpfx Apswcygcs Aep total power requirement: 2,2 kW weight of the machine ca.: 730 kg dimension machine xH: 1,0 x 0,58 x 1,4 m Equipment: Quick-action drill chuck RÖHM Supra 16mm Coolant tank with pump Socket for 220V *

Condition: used, Technical details: bore capacity in steel (diameter): 13 mm throat: 160 mm bore stroke: 60 mm spindle taper MT: MK2 spindle speed:: 210 - 2580 / 16 step U/min feed: manual mm/U table clamping surface:: 200 x 185 (fest) mm Distance spindle/table max.: 620 mm table clamping surface:: 260 x 265 (verstellbar) Distance spindle/table max.: 160 - 460 mm table rotating: ja ° drill table adjustment: 300 (Handkurbel) mm column diameter: Ø ca. 70 mm total power requirement: 900 Watt weight of the machine ca.: 90 kg dimension machine xH: 0,6 x 0,31 x 1,7 m Kjdpfxjvgbdxe Ap Asdp The machine is equipped with a RÖHM 1-13 drill chuck incl. drill chuck key. Spindle run right. Small vice included *

Condition: used, Technical details: bore capacity in steel (diameter): 22 mm throat: 205 mm Kedpfx Apovxf Irs Aedp bore stroke: 100 mm spindle taper MT: MK2 spindle speed:: 2 step U/min feed: manuell mm/U Distance spindle/table max.: 150 - 600 mm base plate surface area: 350 x 400 mm table clamping surface:: 360 x 280 mm table rotating: 360 ° drill table adjustment: 450 mit Kurbel mm column diameter: Ø 100 mm control voltage: 380 V total power requirement: 0,8 kW weight of the machine ca.: 270 kg dimension machine xH: 0,6 x 0,5 x 1,95 m column drill incl. machine + vice. *

Condition: used, Year of construction: 1982, Technical details: bore capacity in steel (diameter): 28 mm throat: 300 mm bore stroke: 150 mm drill capacity in cast iron: 30 mm spindle taper MT: MK3 spindle speed:: 200; 300; 500; 800; 1250; 2000 / 6 step U/min feed: manuell mm/U Distance spindle/table max.: 50 - 600 mm table clamping surface:: 330 x 300 mm Ksdpju Idkbjfx Ap Asdp table rotating: nein ° drill table adjustment: 550 (Handkurbel) mm column diameter: Ø 125 mm total power requirement: 1,5 kW weight of the machine ca.: ca. 300 kg dimension machine xH: 0,7 x 0,45 x 1,87 m Equipped with RÖHM Supra 3 - 16mm quick-action chuck Machine vice *

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm Kdjdpfxsu Idkze Ap Ajp throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Condition: used, Year of construction: 2011, Technical details: bore capacity in steel (diameter): 35 mm throat: 350 mm bore stroke: 180 mm threading: ST M 24 mm spindle taper MT: MK4 spindle speed:: 50 - 1450 U/min Distance spindle/table max.: 780 mm table clamping surface:: 560 x 560 mm Kdsdpfx Asyli Sfjp Asp weight of the machine ca.: 500 kg dimension machine xH: 0,73 x 0,56 x 0,22 m

Condition: used, Year of construction: 1971, Technical details: bore capacity in steel (diameter): 16 mm throat: 250 mm bore stroke: 125 mm spindle taper MT: MK 2 spindle speed:: 350 - 2000 / 8step U/min Kedpfx Aeu Idhmsp Aedp table clamping surface:: 280 x 355 mm table rotating: ja ° drill table adjustment: 520 vertical mm distance table - lower edge spindle: max. 600 mm column diameter: 110 mm total power requirement: 1,1 kW weight of the machine ca.: 272 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: -Drill chuck 13 mm -twist drill 10 mm with 45° countersunk cut -machine vice *

Condition: used, Year of construction: 2003, Technical details: bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm Kodpeu Idhyjfx Ap Ajdp table clamping surface:: 420 x 270 mm table rotating: 360 ° table swivable approx.: 30° links / rechts drill table adjustment: 600 manuell mm column diameter: 100 mm current- max.: 400 V / 50 Hz A total power requirement: 0,9 kW weight of the machine ca.: 180 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting *

Condition: used, Year of construction: 1986, Technical details: bore capacity in steel (diameter): 18 mm throat: 250 mm bore stroke: 100 mm drill capacity in cast iron: Ø 23 mm spindle taper MT: MK 2 spindle speed:: 400 - 630 - 1000 - 1600 - 2500 U/min Kedpjwiwwfefx Ap Asdp feed: manuell mm/U Distance spindle/table max.: 75 / 605 mm table clamping surface:: 250 x 250 mm column diameter: Ø 90 mm total power requirement: 0,55 kW weight of the machine ca.: ca. 170 kg dimension machine xH: 0,4 x 0,8 x 1,8 m

Condition: used, Technical details: bore capacity in steel (diameter): 30 mm throat: 260 mm bore stroke: 160 mm spindle taper MT: MK3 feed steps: 0,1; 0,2; 0,3 mm/U und manuell spindle speed:: max. 1800 stufenlos U/min Distance spindle/table max.: 750 mm table clamping surface:: L: 280 x B: 355 mm table rotating: nein ° clamping table - swivable: 360 Grad drill table adjustment: vertikal: 600 mm column diameter: 130 mm threading: Nein / no total power requirement: 1,1 kW weight of the machine ca.: 570 kg dimension machine xH: 0,9 x 0,9 x 1,9 m This machine has 2 tables. Drilling table LxW: 370 x 500 mm Attachment table: LxW: 420 x 750 mm Clamping surface = 320 x 600 mm, transverse displacement (X-axis) 250 mm possible Ejection of tool via ejector wedge accessories: vice machine base Ksdpjva Higsfx Ap Asdp *

Condition: used, Year of construction: 1968, Technical details: bore capacity in steel (diameter): 40 mm throat: 380 mm bore stroke: 240 mm spindle taper MT: MK 5 spindle speed:: n.b. U/min feed: 01 / 0,14 / 0,2 / 0,28 / 0,4 (manuell+automatisch) mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 540 x 730 mm table rotating: 360 ° drill table adjustment: 600 (manuell) mm column diameter: Ø 220 mm base plate surface area: B: 510 x L: 510 mm total power requirement: 4,0 kW weight of the machine ca.: 1300 kg dimension machine xH: 1,2 x 0,95 x 2,35 m Kdjdpsvpfzyjfx Ap Aop Operation via control panel and/or foot switch Mechanical thread cutting incl. vice *

Condition: good (used), Year of construction: 1998, functionality: fully functional, operating hours: 150 h, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 35 mm, spindle mount: MK 3, drilling depth: 200 mm, height adjustment type: mechanical, actuation type: manual, rotational speed (max.): 3,200 rpm, rotational speed (min.): 80 rpm, Powerful, precise drilling machine with a wide range of applications. Table adjustment via rack and pinion. Reversible switch for clockwise/counterclockwise rotation, digital speed display, prepared for milling attachment. Accessories: precision quick-change vise, clamping width 145mm, jaw width 125mm, angular surface 90° for vertical clamping. Used very little, as it was only used for small workshop prototype construction and test drilling with special tools; business closed due to retirement. Collection is possible in 85521 Ottobrunn. Technical data UNIMAX 3 Continuous drilling capacity in E335 3 - 25 mm Normal drilling capacity 30 mm Threading capacity M 4 - M 20 Spindle MK 3 Drilling depth 125 mm Overhang 260 mm Spindle / table 90 - 840 mm Table surface 550 x 400mm T-slot width 14 mm Column diameter Kdsdozcfphjpfx Ap Asp 110 mm Overall height 1,855 mm Weight 225 kg Motor, pole-reversible 0.8 / 1.5 kW Power connection 400 V / 50 Hz Spindle speeds, stepless Range A 80 - 1,440 rpm Range B 180 - 3,200 rpm Standard packaging D - 220x74x125 cm

Condition: used, Year of construction: 1970, Column Drilling Machine FLOTT SB32 Spindle mount: MK3 Spindle speeds: 135–770 rpm Kdsdpfx Aeyvr Acop Aep Round table, diameter 400 mm Overall height: 2 m Weight: approx. 200 kg.

Condition: new, Year of construction: 2026, - Stepless speed control - Quickly adjustable drill depth stop - Thread cutting device - Undervoltage protection - Table height adjustment via rack and pinion - LED lighting in the head - Continuous/normal drilling capacity 20/23 mm - Thread cutting capacity max. M 12x1 - Spindle MK II - Drilling depth 100 mm - Overhang 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): Number 2, spacing 125 mm - Speed display: Digital - Drilling depth display: Digital Kdodpfjd Nk S Isx Ap Aop - Quickly adjustable drill depth stop - Manual feed - Motor: Three-phase 400 V - Spindle speeds, stepless: 30 - 3,000 rpm Optional drilling package 3, consisting of: - Machine vise [felix] 2.0 100 mm - Quick-change drill chuck 3-16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reducing sleeve MK 2 to MK 1 € 485.00 Optional: Coolant system: € 620,- FACTORY WARRANTY: 3 years DELIVERY: Free to your doorstep, including packaging NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT DEALER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display Kedpfx Apjy S Axgs Ajdp - Drilling depth fine adjustment 0.1 mm

Condition: new, ALZMETALL column drilling machine Alzstar 23 S Manufacturer: Alzmetall Type: Alzstar 23 S Condition: NEW Drilling capacity steel E335 (St 60) 23 mm Thread cutting Steel E335 (St 60) M 14 Cast EN-GJL-200 (GG20) M 16 Short spindle MK 2 Spindle stroke 100 mm Thrust 250 mm Kdedpfx Apey S Avls Aep Column diameter 90 mm Machine table, usable support 370 x 300 mm T-slots, number x width x distance 2 x 14 x 160 mm Distance spindle-table min./max. 140/670 mm Hand feed Machine height without options approx. 1770 mm Net weight approx. 175 kg Drive stepless Motor 750 / 1500 rpm Power 0.6 / 0.95 kW Spindle speed rpm 225-4300 Standard equipment: Mushroom push button (latching) for EMERGENCY STOP Reversing switch for clockwise and counterclockwise rotation Motor protection switch Stepless speed adjustment Digital speed display Protection class IP 54 Connection plug (fully assembled, cable length 2m) Spindle protection with electrical fuse Paint: DD structural paint light gray RAL 7035, anthracite RAL 7016

Condition: new, ALZMETALL AX3/SV pillar drilling machine NEW Manufacturer: Alzmetall Type: AX3 SV Condition: New Drilling capacity steel 40 mm Thread cutting steel M24 Cast M30 Short spindle MK 3 Spindle stroke 120 mm Usable projection 293 mm Column diameter 115 mm Machine table 515 x 360 mm Distance spindle-table 117/701 mm T-slots 2 x 14 x 224 mm Kdsdpfxoy S Auzo Ap Ajp Feed 0.1 + 0.2 mm/rev Machine height approx. 1840 mm Net weight approx. 270 kg Drive continuously variable Motor 750/ 1500 rpm Power 1.0 / 1.6 kW Spindle speed rpm 80-1125 Additional equipment: - Reversing switch - Machine light LED - Thread cutting device - Coolant device B Available immediately from stock

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status displays and warnings in the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable projection (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display Kdjdpfx Apjy S Auue Aep - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Not the right machine? Then please contact us.

Condition: new, Alzmetall Alzstar 30/s pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 30/S Condition: new Drilling capacity steel E335 (St 60) 30 mm Thread cutting Steel E335 (St 60) M 16 Cast EN-GJL-200 (GG20) M 20 Short spindle MK 3 Spindle stroke 140 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 132/724 mm Kdedpfx Asy S Ar Hep Asp Feed manual Machine height without options approx. 1770 mm Net weight approx. 260 kg Drive continuously variable Motor 750 / 1500 rpm 750 / 1500 rpm Power 1.0 / 1.6 kW 1.0 / 1.6 kW Spindle speed rpm 225-4300

Condition: new, functionality: fully functional, Equipment: lighting, Alzmetall AB 40 iTRONIC 70-4000rpm pillar drill Condition: new Drilling capacity steel E335 (ST 60): 50 mm Thread cutting steel: E335 (ST 60): M 30 Spindle mount: MK 4 Spindle stroke: 160 mm Throw: 300 mm Column diameter: 145 mm Spindle speed L rpm: 70 – 4,000 Power: 1.8 / 2.9 KW Equipment: 7" TFT - LCD display with touch function Thread cutting device Infinitely variable speed setting Automatic speed control Spindle protection Three separate buttons for clockwise - counterclockwise - stop Mushroom push button Main switch Clockwise and counterclockwise rotation Control voltage 24 volts Protection class IP 54 Motor insulation class "F" (155°) Painting Electromagnetic feed overload protection Machine oil initial filling Equipment options: - Alzmetall option no. 12 LED machine light - Alzmetall option no. 20.4 Comfort grip switch - Alzmetall option no. 20.5 Foot switch - Alzmetall option no. 24 Coolant device A Kedpfx Apjy S Aryo Aodp - Alzmetall option no. 37.3 Automatic drilling depth control - Alzmetall option no. 37.5 Technology computer - Alzmetall option no. 37.6 Maximum drilling depth display - Alzmetall option no. 38.1 Automatic spindle stop - Alzmetall option no. 38.2 Workpiece counter / spindle hour counter - Alzmetall option no. 50.6 Drilling depth fine adjustment 0.1mm

Condition: new, Alzmetall Alzstar 40/SV pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/SV Condition: new Technical data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm Kdsdpfx Aey S Artep Ajp T-slots (number x width x distance): 2 x 14 x 224 mm Distance spindle-table (min./max.): 117 / 701 mm 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity St 60 (mm): 40 Spindle stroke (mm): 120 Thrust (mm): 293 Motor (kW): 1.45 / 1.9 Speed range (r/min): 160 - 2250 Weight (kg): 285

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping Kdjdpeqa Txqsfx Ap Aep - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, High-performance drilling machine ALZMETALL, type Abomat 20 Production drilling machine Serial No. 452, Year of manufacture 1996 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle mount: SK 40 - M16 Overhang: 280 mm Drill slide stroke: 500 mm Distance from spindle nose to table: 185 - 685 mm Table size: 490 x 400 mm Spindle speed: 50 - 500 rpm, infinitely variable Drill slide feed: 20 - 224 mm/min, infinitely variable Drill slide rapid traverse: 4.5 m/min Feed motor power: 0.18 kW Rapid traverse motor power: 0.75 kW Drill spindle motor power: 1.1 kW (speed 1000 rpm) Kdsdpfx Aeikrtqjp Aop Mains connection: 400 volts, 50 Hz - Spindle speed infinitely variable via frequency inverter - Drill slide feed infinitely variable via frequency inverter - 2 operating modes: setup and automatic operation - Central lubrication - Control cabinet on the back of the machine - Swiveling control panel - Mounted on a steel plate (700 x 650 x 40 mm) with precise height adjustment Space requirement L x W x H: 1200 x 700 x 2530 mm Weight: approx. 1000 kg Good condition

Condition: used, High-performance drilling machine, ALZMETALL, Type Abomat 20 Production drilling machine Serial No. 449, Year of manufacture 1995 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle mount: SK 40 - M16 Overhang: 280 mm Drill slide stroke: 500 mm Spindle distance, max.: 685 Spindle distance, min.: 185 Table size: 490 x 400 mm Spindle speed: 2000 rpm Automatic feed: 224 mm/min Rapid traverse: 4.5 m/min Feed motor power: 0.18 kW Rapid traverse motor power: 0.75 kW Drilling spindle motor power: 1.5 kW Power supply: 400 Volt, 50 Hz Kdodpfx Apegd Ipks Ajp - Production drilling machine with a spindle speed and a feed rate - Current spindle speed: 2000 rpm - Current feed rate: 224 mm/min - 2 operating modes: manual and automatic operation - Electric drill head height adjustment - Central lubrication - Control cabinet on the back of the machine - Mounted on a steel plate (700 x 650 x 40 mm) with precise height adjustment Space requirement L x W x H: 1200 x 700 x 2530 mm Weight: approx. 900 kg Good condition

Condition: good (used), Year of construction: 2010, Article number: 302 0335 Drilling capacity: 34 mm Spindle mount: MK 4 Speed range: up to 6,650 rpm Thrust: 285 mm Table: 420 x 400 mm Clamping surface: mm Stroke: 160 mm Distance table-spindle nose: 790 mm Total connection: 2.2 kW Accessories/equipment: Condition: good Floor space: 600 x 920 mm Weight: 0.3 t Dimensions: 920 x 600 x 1,930 mm Kdedpevk Runofx Ap Ajp