Used Pass Drill for sale (5,789)

Condition: good (used), Nagel Citoborma 280B Paper Drill This machine is 100% functional. It is one of the newest models. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill has an automatic table lock that releases after each cycle. Cjdozdazhepfx Ailord Excellent condition. Solid construction – weight 76 kg. 380V power supply Two drilling heads with adjustable spacing from 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Nagel Citoborma 180 Paper Drill with Pedestal The machine is in 100% working order. Very good condition. Solid construction – weighs approximately 100 kg. This is one of the newest Citoborma drill models. 230V power supply. One drilling head. Drill diameter: 2-20 mm. Stack height: 60 mm. The drill table is adjustable in all directions (sides, front/back). Crsdezdawvjpfx Ailsd It has stops for setting the drilling spacing. In addition, the drill has an automatic table lock that releases after each cycle. The set includes drill bits, tools, a new cutting stick, and instructions.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). Cjdpfjq Nfuzjx Ailord 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Year of construction: 2002, condition: used, functionality: fully functional, Machine for straight cutting of aluminium and copper tubes. Csdpfx Ajyt Spcoiljrd

Year of construction: 2002, condition: used, functionality: fully functional, Machine for cutting aluminium and copper pipes with the option for pipe end processing. Cjdpfxsyt Sppe Ailsrd

Year of construction: 2019, condition: used, We are selling several used marking, beading, drawing, thread embossing, and tabbing tools from Pass Stanztechnik that were used on our Trumpf TruMatic 7000. We also have various smaller tools as well as spare and wear parts available. A complete list can be sent via email. Codoyu Tl Uepfx Ailsrd

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, controller model: DIXI CNC 4400, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,000 mm Vertical movement with pallet changer (Y-axis): 880 mm Distance from spindle axis to top of table: 0 – 1,000 mm Distance from spindle axis to top of table with changer: 0 – 880 mm Table dimensions without changer: 840 x 1,000 mm Table dimensions with standard changer: 800 x 800 mm Max. table load: 2,000 kg Max. table load with pallet changer: 1,200 kg Table rotation: 360° continuous Rapid traverse: 1,500°/min T-slots: 7 equally spaced slots, width 18 H7 Tool interface: ISO 50 Spindle speeds: 8 – 3,000 rpm (in 3 ranges) Drive power: 11 kW Drive power with overload: 13.75 kW Max. torque: 200 kpm Working feed rates (X, Y, Z): 1 – 9,999 mm/min Rapid traverse (X, Y, Z): 9,999 mm/min Measuring system resolution: +/- 0.001 mm / 0.001° Positioning accuracy: 0.001 mm / 0.001° Distance from table axis to spindle flange: 390 mm to 1,390 mm MACHINE DETAILS Control system: DIXI CNC 4400 Credpszd Rizsfx Ailjd Installed total power: 47 kW Compressed air requirement: 6 kg/cm² Dimensions & Weight Dimensions (L x W x H): 4,835 x 4,160 x 3,190 mm Machine weight: approx. 17 t Compressed air requirement: 6 kg/cm²

Condition: used, Year of construction: 2012, power: 20 kW (27.19 HP), working width: 1,300 mm, number of spindles: 82, plate height: 90 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area X-axis: 3,000 mm Working area Y-axis: 1,300 mm Maximum panel thickness: 90 mm Total number of drilling spindles: 82 Drilling units – Unit 1 (top) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Drilling units – Unit 2 (bottom) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Milling spindles Number of milling spindles: 2 Milling spindles – Unit 1 (top) Number of controlled axes: 3 Motor power: 4.5 kW Milling spindles – Unit 2 (bottom) Number of controlled axes: 3 Motor power: 4.5 kW Routing units Number of routing units: 2 Routing units – Unit 1 (top) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW Routing units – Unit 2 (bottom) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW MACHINE DETAILS Total installed power: 20 kW Machine programming software: BIESSEWORKS EQUIPMENT Automatic panel stacking system with motorized transfer Barcode reader (manufacturer: SICK) CE marking Protective grid Safety mats Crodjzf Ibdopfx Ailed The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8565

Condition: used, Year of construction: 2011, total width: 1,500 mm, total length: 3,000 mm, total height: 1,750 mm, Colour: White Empty weight: 450 kg - Year: 2011 - Documentation available: No - CE certificate present: No Cedozizqgepfx Ailord - Serial number: 11060282 - Main motor power [kW]: 1.3 - Table length [mm]: 2000 - Table width [mm]: 520 - Max. drilling stroke [mm]: 60 - Number of spindles [pcs]: 27 - Spindle speed: Manual - Min. spindle speed [rpm]: 2820 - Max. spindle speed [rpm]: 2820 - Distance between spindles [mm]: 30 - Workpiece clamps [pcs]: 10 - Workpiece support/Guide: Traverses - Drills included: Yes - Voltage [V]: 400 - Current consumption [A]: 3 - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 3000mm x 1500mm x 1750mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Stago PB 2015 Paper Drill Crjdpfx Aioziyqxeled This is the latest drill from Stago, originally from the office of a large company. The machine is 100% functional. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock. Sturdy construction – weighs approximately 70 kg. 230V power supply Two drilling heads. Drill diameter: 2-10 mm. Stack height: 60 mm. The machine has an adjustable spacing between the heads. The drill has been serviced. Drills and tools are included.

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Crjdpfxev If T Tj Ailsd Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment

Condition: used, Year of construction: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electric jog operation, - Automatic return of the drilling unit after reaching the preset drilling depth - Automatic extension of drilling depth when end-grain drilling saves the need to adjust drilling depth from flat to end-grain drilling. (+10 mm, e.g. with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end-grain 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy bit changes. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping beam, movable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop fence 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily swappable from right to left for mirror-image shelf drilling in carcass constructions, also suitable for line boring in System 32. - Side stops and position settings, as well as drilling height position via support table using mechanical digital counters. - Side stops can be easily swiveled away, for the quickest changeover from carcass to frame and line boring. - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm. - Ideal three-stage... Weight: approx. 400 kg gross, approx. 350 kg net. Dimensions (L x W x H): 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction hood, dust tested, ø 120 mm. 1 set for line boring in System 32 complete with: 1 base fence 1050 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 frame dowel device complete with: 1 center stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim. Credpfxeyyxkhe Ailjd

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment Special drilling machine for stair construction, window construction, and universal applications through pneumatic height adjustment. Angled dowelling and picket drilling can be easily achieved thanks to the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Crodpfxjyfta Ts Ailed Motor start with practical handle switch Precision chuck with two inserts 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowelling on two levels without readjustment The desired drilling heights can be set for each drilling level with a handwheel and digital counter; switching is then done pneumatically from the front Crossfeed approx. 320mm, stepless or in a 12mm grid Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, can be placed at the front and rear of the table 2 swiveling workpiece supports 2 side stops, also usable as a front support Undercarriage Dust extraction connection 80mm 4 used but good drill bits 9, 12, 16, 19mm Few paint spots have been repaired, very good condition, see original photos A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: new, bore capacity in steel St 60 32 mm bore capacity in cast iron GG 20 38 mm Drilling capacity in St 60 40 mm threading in St 60 M 24 threading in GG 20 M 30 Cjdpfx Aisyvvptslsrd Short spindle MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 515 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117 / 701 mm feed von Hand spindle turning speed - stepless 160 - 2250 U/min total power requirement 1,45/1,9 kW weight of the machine ca. 260 kg

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 220 mm tool adaptor MK 4 Cjdpfxezip I Hj Ailsrd machine weight ab. 400 kg

Condition: new, 40 mm M 24 M 30 spindle turning speed - stepless 160-2250 U/min MK 3 spindle stroke 120 mm Cedpfsyvvq Dox Ailsrd throat 293 mm column diameter 115 mm 515x360 mm distance spindle /table min./max. 117/701 mm 2 x 14 x 224 mm feed 0,1 + 0,2 mm/U Machine height 1840 mm

Condition: good (used), Code: 0431 Brand: GRIGGIO Model: GF 27 - CE Standard Multiple boring machine with 27 spindles for furniture, custom-made furniture, kitchens, joinery, panels, bathroom furniture and various – CE Standard Technical specifications: N° 27 quick-change spindles Centre-to-centre distance between each spindle 32 mm Total centre-to-centre distance between the first and last spindle 832 mm Credpszipq Ijfx Ailod Max drilling depth 85 mm Table dimensions 1050 x 380 mm Motor 2 Hp N°2 pneumatic workpiece clamps Squares on the worktable Drill bit holder Pneumatic head tilting from 0 to 90°, allowing drilling in any position Extension rods for stop holders Quick Dept Overall dimensions mm 1200 x 780 x 1300 h Weight kg 360

Condition: used, Clamping cube for radial drilling machine Clamping plate, clamping cube, clamping block Clamping surface on top: L x W = 600 x 500 mm Clamping surface on the side: L x H = 600 x 460 mm Overall height: 505 mm T-slots: 20 mm Credpfx Ajzinz Soilod T-slot spacing: 150 mm Overall dimensions L x W x H: 680 x 500 x 505 mm Weight: 150 kg Good condition

Condition: used, Univ. universal milling machine with active digital display, DECKEL type FP 1 Universal milling machine Machine No. 2102 - 6130 Year of manufacture 1991 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 210 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate 5 to 500 mm/min Rapid traverse 1200 mm/min Motor power 1.6 and 2 kW, pole-changing Mains connection 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN type TNC 113 - Stepless feed in the X, Y and Z axes - Spindle speed controlled via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable 100 mm Cjdpfx Aezinzxeilerd - Fixed tilting table 600 x 210 mm - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Protective enclosure with hinged doors around the machine table - Original chip tray for mounting on the machine base - Machine lamp - Counter holder with counter bearing - Electrical diagram available Space requirement L x W x H 1600 x 1250 x 1750 mm Weight 900 kg Good condition

Condition: used, Univ. universal milling machine with active digital display, DECKEL Type FP 1 Machine No. 2101 - 7088, Year of manufacture 1993 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW, pole-changing Power connection 380 Volt, 50 Hz - Active control and digital display for 3 axes, HEIDENHAIN Type TNC 123 - Stepless feed rate via servo motor in the X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Swivel, rotary, and tilting angle table DECKEL, Type 2114 - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Hinged protective shield with safety switch - Original chip tray for mounting on the machine base Crjdpfx Ajziny Ijilsd - Electrical diagram available Space requirement L x W x H 1600 x 1200 x 1770 mm Weight 900 kg Good condition

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 179-000-000000-000, functionality: unexamined, Machine data Designation: IMI Cedpfozim R Eex Ailerd Installation dimensions: approx. 2000 × 1200 × 2300 mm Weight: approx. 1500 kg

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Crjdjyqxxrjpfx Ailed Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: used, Scharmann drilling machine Available from September Credpfx Aszilmreilod Year of manufacture: June 1965, original purchase price: 267,045 DM Travel ranges: Longitudinal (X): 1,600 mm Vertical (Y): 1,200 mm Transverse (Z): 1,150 mm Spindle speed: 20 – 6,000 rpm Table size: 1,200 × 1,400 mm Table load capacity: max. 6 t

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Credpfx Aiewuz Dgeled Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: excellent (used), functionality: fully functional, Detel M-35 multi-spindle drilling machine Number of spindles: 35 Spindle spacing: 32 mm Distance between extreme spindles: 1088 mm Drilling depth: up to 90 mm Vertical and horizontal drilling capability 4 pneumatic material clamps Drilling speed adjustment Motor power: 2 x 1.4 kW Csdpfx Aiozh U Hlslsrd