Pillar Drilling Machine

Strands S 25

Condition: used, Year of construction: 1986, machine/vehicle number: 275590, Ref. No. 25362 Technical Data: - Drilling capacity 25 mm - Drill spindle taper MK 3 - Drill spindle speeds 100 / 205 / 345 / 440 rpm 695 / 885 / 1450 / 2900 rpm Hnjdpjyf Ehiefx Aa Eop - Drill spindle stroke 130 mm - Drill spindle reach 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis: 415 mm Y-axis: 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space required approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vice

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: Hnodpfxsv Rgzws Aa Esp 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: used, Year of construction: 2022, Technical details: Hnjdeu N A Eaopfx Aa Esp Pressure: 30 t stroke: 142,5 mm table surface area: 500 x180 mm passage opening in table: 500 x160 mm distance between columns: 1000 mm daylight dimension : table/slide up: 120 - 1020 mm machine weight approx.: 176 kg dimension machine xH: T: 0,8 x 0,8 x 1,8 m Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./min.: 1290 / 300mm Vertical lower beam, adjustable, manual, 10 steps, 100mm distance between steps Plunger cheek Lifting cylinder Ø 63mm with plunger holder Trunnion bore Ø 25 x 25mm *

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Hnodpfx Aajkvmi So Eop Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1975, Meuser horizontal boring and milling machine model M 76 BF 5.5 kw Drilling depth 76 mm Spindle holder MK 5 Hedpfx Ast T Rkdoa Eenp Table 1000 x 1000

Condition: good (used), NHH lathe Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Hnedpfjmw Ukcox Aa Ejp Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: new, measuring length bis 5700 mm Tube length 6000 mm numbers of toolholders 7 Rohr Edelstahl dimensions 6,0 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. Hsdsfv Atlspfx Aa Eenp The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor!

Condition: good (used), Centre height: 125 mm Distance between centres: 800 mm Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Infinitely variable spindle speeds: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm Hnsdpfeyu R H Nox Aa Eep 44 inch threads: 4 - 112 TPI Electrical connection: 380 V, 0.7/1.4 kW Required space: Approx. weight: 500 kg

Condition: used, greates pass round over bed 480 mm swing diameter over bed slide 300 mm turning length 1500 mm centre height 240 mm centre distance 1500 mm spindle bore 42 mm spindle turning speed range 14 - 1400 U/min Hedpfotqqx Ajx Aa Eonp total power requirement kW weight of the machine ca. 2,4 t dimensions of machine L x W x H 3,00 x 1,05 x 1,40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running center

Condition: excellent (used), Universal Milling Machine Schaublin 53N Manufacturer: Schaublin Model: 53 N Table size: 1100 x 255 mm T-slots: 4 T-slot width: 14 mm T-slot pitch: 50 mm Longitudinal travel: 700 mm Longitudinal travel for spiral milling: 550 mm Vertical travel: 430 mm Cross travel: 250 mm Feeds, longitudinal/cross: 12 to 1000 mm/min Feeds, vertical: 6 to 500 mm/min Rapid traverse, longitudinal/cross: 3500 mm/min Rapid traverse, vertical: 1750 mm/min Hjdoyxgyhepfx Aa Eenp Spindle speeds: 18 steps, 38 to 1500 rpm Spindle taper: VSM 33831 Size 44 Collet chuck: P25 Main drive power: 4 HP Main drive speed: 1425 rpm Machine weight: 1650 kg Space requirement: 226 x 172 x 165 cm No guarantee is given for the accuracy, completeness, or timeliness of this information.