Pillar drill

Alzmetall Alzstar 40/SV I Neu ab Lager

Condition: new, pressure 60 t stroke 400 mm daylight longitudinal/sideways 820 x 300 mm dayligth 900 mm liter capacity 6,5 l feed down 6,1 mm/sec feed up 10 mm/sec Motor output 2,2 kW weight of the machine ca. 0,675 t dimensions of the machine ca. 1,2 x 0,85 x 2,1 m Tjdpfogg Nn Sex Apdod Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking

Condition: new, welding current max. 250 A open-circuit voltage max. 66 Volt connected load frequency 400 V weight 65 kg Dimensions (LxWxH) 900 x 500 x 750 mm MIG/MAG gas-shielded welding machine: Tsdpfx Aoy Aa Itjpdod incl. 3m hose package.

Condition: new, Year of construction: 2024, pressure 60 t stroke 400 mm table surface area 800 x 500 mm feed down 4,03 mm/sec feed up 5,82 mm/sec column daylight 820 mm oil pressure max. in the work cylinder 400 bar oil volume 26 l voltage 400 V / 50 Hz total power requirement 3 kW weight of the machine ca. 0,55 t dimensions of the machine ca. 1,5 x 0,9 x 2,1 m Tsdpfx Aovcrmvopded • unused workshop press, • manual and hydraulical operation, • Pressure cylinder moveable horizontally, • Working table hydraulical adjustable, • Cylinder Ø 150 mm, piston base Ø 85 mm.

Condition: new, Fastech Horizontal Bandsaw, Semi-Automatic, BMSY 360 DGH ECO Round Cutting Capacity mm: 360 Flat Cutting Capacity mm: 510 x 360 Square Cutting Capacity mm: 360 +30° Round Cutting Capacity mm: 360 +30° Flat Cutting Capacity mm: 440 x 360 +30° Square Cutting Capacity mm: 360 +45° Round Cutting Capacity mm: 360 +45° Flat Cutting Capacity mm: 390 x 360 +45° Square Cutting Capacity mm: 360 +60° Round Cutting Capacity mm: 200 +60° Flat Cutting Capacity mm: 200 x 360 +60° Square Cutting Capacity mm: 200 -30° Round Cutting Capacity mm: 360 -30° Flat Cutting Capacity mm: 440 x 360 Tjdpfxeg Ektto Apdsd -30° Square Cutting Capacity mm: 360 -45° Round Cutting Capacity mm: 360 -45° Flat Cutting Capacity mm: 390 x 360 -45° Square Cutting Capacity mm: 360 -60° Round Cutting Capacity mm: 260 -60° Flat Cutting Capacity mm: 260 x 360 -60° Square Cutting Capacity mm: 260 Motor Power, Main Drive kW 3 Hydraulic Pump Power kW 0.37 Motor Power, Coolant Pump kW 0.12 Band Speed, stepless: m/min 20 - 100 Saw Band Dimensions mm: 4800 x 34 x 1.1 Height of Work Surface mm: 860 Weight kg: 1450 Length / Depth / Height mm: 2650 / 1210 / 1870 Double Miter Saw Stepless Band Speed Hydraulic Vise High-Performance Gearbox Hydromechanical Saw Band Tensioning Saw Band Brush Digital Display for Miter Angle

Condition: new, Year of construction: 2026, CORMAK ZX 40BPC is a solid metal drilling and milling machine. Possibility of head rotation +/- 90 degrees of spindle, possibility of head rotation +/- 90 degrees, automatic spindle feed, right and left rotation, large table, liquid cooling, automatic table feed in the x axis, powerful engine, ability to drill up to 40 mm. Rotational speed up to 2500 rpm Machine characteristics HEAVY STABLE CAST IRON AUTOMATIC SPINDLE FEED ADJUSTABLE HEAD HEIGHT MASSIVE CROSS TABLE WITH PRECISELY GRINDED SURFACE DOVtail-shaped guides QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATIONS ROTATING HEAD +/- 90° Technical data Max. drilling size (steel/cast iron) 32/40mm Face milling width 80mm End milling width 22mm Spindle extension 125mm Spindle taper MT4 Spindle speed (1400 rpm motor) 50～2500min-1 Maximum distance of the spindle tip from the table 735mm Maximum distance of the spindle tip from the base 1245mm Distance of the spindle from the column surface 272 mm Dimensions of the work table 730x210mm Base dimensions 690x520mm Engine 1.3/1.8kW Cooling engine 40W Dimensions 1200x1000x1910mm Weight 440 kg Tsdpfxovxhfmj Apdjd

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: Tedpfx Aey S Axgepdod - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request. Tjdpfxsfm T Hbj Apdod

Condition: good (used), machine/vehicle number: 421272, range of control: 20 - 180 A welding circuit at 100% ED: 135 A electrical connection: 380 V, 5,5/8,5 kVA V Todpfec Ich Ijx Apdjd space needed: 520 x 480 x 800 mm weight: 118 kg

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers Todpfsxacbuox Apdod - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: new, Fastech Horizontal Bandsaw, Semi-Automatic BMSY 320 DGH Saw band dimensions: 4160x34x1.1 mm Band speed: 20 - 100 m/min, continuously variable Cutting capacity 0° rectangular: 450x320 mm, round 320mm Cutting capacity 30°: round 320 mm, square 320 mm, rectangular 410x320 mm Cutting capacity 45°: round 320 mm, square 320 mm, rectangular 330x320 mm Cutting capacity -30°: round 320 mm, square 320 mm, rectangular 420x320 mm Cutting capacity -45°: round 320 mm, square 320 mm, rectangular 340x320 mm Cutting capacity -60°: round 240 mm, square 220 mm, rectangular 230x220 mm Tedpfx Apjg Ekp Nsdjd Working height: 860 mm Coolant pump motor: 0.12 kW Hydraulic motor: 0.37 kW Motor: 2.2 kW Length: 2260 mm Width: 1160 mm Height: 1700 mm Weight: 1030 kg Double miter saw Continuously variable band speed Hydraulic vise High-performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for the miter angle