Used Pme for sale (8)

Condition: ready for operation (used), Year of construction: 2007, Immediately available ex stock: Single-column eccentric press PME Erfurt Model PE 63 C Year of manufacture: 2007, only very few operating hours (original price €90,000) Machine approved according to latest UVV for manual loading operations Table: 1000 x 600 mm Pressing force: 63 t Stroke adjustment: 8 – 100 mm Chedpfsxy N Inox Ab Tef Ram adjustment: 80 mm Number of strokes: 100/min Drive: 6 kW Weight: 4.5 t Price: €12,500 plus VAT ex location

Condition: used, Year of construction: 2008, pressure 63 t throat ca. 280 mm stroke 8-100 mm Chedpexu Nw Sefx Ab Tof no. of strokes 60-130 Hub/min ram - range of adjustment 80 mm weight of the machine ca. 4,3 t

Condition: reconditioned (used), Year of construction: 2008, Nominal Press Force: 800 kN Ram Stroke, adjustable in steps: 30...120 mm Cedpjw Ec A Esfx Ab Tohf Ram Adjustment: 100 mm Throat Depth: 300 mm Stroke Rate at Idle: 70 / min Continuously Adjustable Stroke Rate: 40 - 130 /min Die Height at Maximum Stroke (bottom) and Adjustment (top): 400 mm* Table Clamping Surface (W x D): 1,200 x 600 mm Ram Clamping Surface (W x D): 600 x 450 mm Ram Bore (pin bore): 50 H7 mm Main Motor Power: 7.5 kW Approx. Machine Height: 3,250 mm Machine Weight: 7,500 kg - With hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, latest UVV (accident prevention regulations) - With Siemens S7/300 control, touch operation on movable operator panel - Two-hand operation, stroke gate protected by limit switches - Centering groove - Roller feed: Servo 300 (strip width 300 mm, strip thickness: 4 mm, cross-section: 1000 mm²) - Roll block strips - Anti-vibration feet

Condition: used, Year of construction: 2004, machine/vehicle number: 2177/03/9604014, Press capacity: 160 ton Chsdpfouqdzdex Ab Tsf Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton Standard configuration Control system SIEMENS S7 Extended machine accessories Automation PME feeding unit consisting of decoiler and feed / straightening unitDecoilerLoad capacity 2 tStrip width 400 mmMaterial thickness 0.5 - 4.5 mmCoil outer diameter 1800 mmSpreading range 470 - 630 mmHydraulic expansion of the spreadHydraulic pressure armElectronic feed / straightening unitMax. strip width 400 mmMax. material passage 410 mmMaterial thickness 0.5 - 4.5 mmCross-section 1200 mm²Number of straightening rollers 7Straightening roller diameter 80 mmNumber of feed rollers 2Pneumatic lifting of feed rollersFeed speed 50 m/minFeed length 0 - 10 m

Condition: excellent (used), Band width: max. 400 mm Band thickness: 0.5 - 4.0 mm Cross-section: 1,000 mm² Upper roller pneumatically liftable Large roller basket at infeed Side band guide with right/left spindle With mounting plate for installation on the press body Chedpfx Asxg Rlzeb Tef The feeder receives a completely new press control as a desktop unit upon order

Condition: used, Year of construction: 2018, Nominal pressing force: 4,000 kN Ram stroke, adjustable in increments: 30–160 mm Ram adjustment: 180 mm Throat depth: 515 mm Stroke rate at idle: 45 / min Option: Infinitely variable stroke rate: 10–60 / min Die installation height at max stroke (ram down, adjustment up): 660 mm Table clamping surface (W x D): 1,700 x 1,000 mm Table height above floor: 1,005 mm Ram clamping surface (W x D): 1,100 x 800 mm Pin bore in ram: 65 mm Main motor power: 45 kW Machine height approx.: 4,325 mm Machine weight: 33,000 kg Control - Press safety control with redundant structure and self-diagnosis, including status and error display in plain text Stepless stroke rate regulation in the range of 10–60 strokes/min via ABB frequency inverter Control variant – touchscreen TFT color including electronic cam control with tool management and tool protection, with color touchscreen visualization, SIEMENS PLC S7-300, tool data management, counting systems, data transmission via Profibus Fully automatic stroke/ram adjustment Cedow Rbxzopfx Ab Tshf Rigidly welded tie rods, clear opening between tie rods: 1,345 mm Swiveling main control panel Non-contact safety device – BWS brand LUMIFLEX mounted at the front of the machine table and/or tool area, each mounted on the tie rods.

Condition: refurbished (used), Year of construction: 2025, Drive: servo motor Belt width max. 300 mm Belt thickness 0.5 - 4.0 mm Cross-section max. 1,200 mm² Feed length 0 - 9,999.9 mm Accuracy + / - 0.05 mm Roller diameter 80 mm The feed rollers are hardened and ground. The top roller is lifted to feed in the strip via a pneumatic cylinder and valve. pneumatic cylinder and valve. The contact pressure of the top roller is applied pneumatically via Chsdpfxjr H Dwis Ab Tof short-stroke cylinders. The top roller is mounted in a torsion-resistant manner to prevent one-sided roller pressure. roller pressure is prevented. Off-center belt transport is permitted. An infeed roller basket, an adjustable lateral belt guide and a belt end belt end control on the infeed side are included in the standard version. included. Protective covers on the feed rollers and the drive elements. The intermediate lifting can be closed and switched off

Condition: new, Year of construction: 2023, Nominal press force of 1,000 kN Piston stroke, in steps adjustable 16 to 140 mm Tappet adjustment 90 mm Throat depth 295 mm Number of strokes in the idle 70 / min Mould installation height at Größthub Chodpsdulidofx Ab Tof down and adjustment up 420 mm *. Table clamping area (Wxd) 1,050 x 660 mm Plunger clamping area (Wxd) 640 x 460 mm Pin hole in the tappet 65 H 7 mm Power of main motor 7,5 kW Height of the machine 3,085 mm Weight of machine 8,500 kg, hydr. Overload protection, automatic slide adjustment, semi automatic stroke adjustment, latest UVV