Used Brandt Ktd 72 for sale (85)

Year of construction: 2006, Condition: good (used), - Glue pot - Conversion: carried out by the company Hüttenhölscher in Verl - Application: glue application line for handle strips - Vacuum table: included Wiwojyyn - Automatic pressure zone: included

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Machine with only a few operating hours C92Ehpu

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Ffhlpd08 Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, Year of construction: 2008, Edgeband thickness max: 8 mm Thickness of coiled edgeband max: 3 mm Feedrate max: 11 m/min Glue system granulate: glue pot below feeding chain Quick-change glue pot: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 1 motor Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: right-side machine BRANDT Glue system A 8 Gluing unit: Yes Dqygoz Control: BRANDT POWER CONTROL PC 20+ Conformity marking: CE mark Weight: 1.960 kg

Year of construction: 2009, Condition: like new (used), Glue tank Guillotine Cutting the front / back of the ball Milling up / down cutters R2 Material feed 11 m / min European CE certificate Qutxx

Condition: excellent (used), Year of construction: 2011, Edge banding machine Manufacturer: Brandt Type: KDF 660 Ambition 1660 Year of manufacture: 2011 Edge thickness: 0.4 - 12 mm Max. workpiece thickness: 8 - 60 mm Feed: 8 - 18 m/min, infinitely variable Total power: 24 kW Weight: approx. 3 tons Total length: 6,260 mm Pre-melter: Yes Joining unit: Yes 3D2Gufysc Cross-cut saw unit: Yes Radius, flush milling unit: Yes Corner copying unit: Yes Radius scraper: Yes Surface scraper: Yes Buffing unit: Yes

Condition: used, Year of construction: 1996, Used machine Year of construction: 1996 Equipment and technical data: Spreading unit consisting of: -roll and fixed length magazine -roll separator Dqlk22 -glue applicator -pressure zone Heating system: Glue basin Cross-cut unit Jointing unit Universal trimming unit Scraper unit Buffing unit Buffing unit Workpiece thickness: 10-55 mm Workpiece length: min. 160 mm Workpiece width: min. 65 mm Edge thickness: 0.4 - 12 mm Roller cutting: 3 x 45 mm Feed rate: 13 m /min. Pneumatics: 7 bar Availability: Short term Storage location : Flörsheim

Condition: excellent (used), Year of construction: 2010, operating hours: 2,419 h, Functionality: fully functional, total length: 5,760 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, plate height: 60 mm, Brandt 1650 Highflex with return and PU glue Box Top maintained Year of manufacture 2010 Operating hours 2419 H Total edge length: 201744 m Edge thickness max 12 mm Panel thickness max 60 mm Dqxkm9 Roll material thickness max 3 mm Workpiece width min 70 mm Feed max 18 m/min Feed stepless Height adjustment motorized Glue system granulate Pre-melting container BRANDT glue system QUICKMELT KD 2 x PU glue tank Strip magazine Joining milling unit Cross-cut saw unit 2 motors Flush/radius/chamfer stations 1 Corner copying unit 2 motors Scraping unit Profile scraper, flat scraper Buffing unit Units clocked NC axis(s) Version Right-hand machine Machine length 5,760 mm Conformity marking CE mark Return Ligmatech Boomerang PU glue box is still in operation, viewing desired ,available approx. March 2025 no guarantee pickup only, forklift available net price plus VAT price negotiable

Condition: used, machine/vehicle number: 005832, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gzbdmg Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, Year of construction: 2013, Edgeband thickness max: 12 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece width min: 70 mm Feedrate max: 18 m/min Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Glue system granulate: Premelting unit Quick-change glue pot: Yes Magazine for single strips: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: right-side machine Quick-change aggregate(s): Yes Machine length: 6.070 mm BRANDT Glue system QUICKMELT QA 45: Yes BRANDT Trimming saw HL 6120: Yes BRANDT | HOMAG MS 40 Multifunctional trimming unit: Yes BRANDT Flush trimming/radius/chamfer milling aggregate MF 6250 Multifunctional trimming unit: Yes BRANDT Profile scraper unit ZK 6510: Yes Scissor support: Yes Dqygnh Control: BRANDT POWER CONTROL PC 20+ Conformity marking: CE mark

Year of construction: 1988, Condition: used, Table dimensions - mm Number of milling agregates - St. Motor output - kW St8Ky2Zs8 reus - U/min Weight - kg Year used, good conditionmanufactured by Brandttype F10 + EK 11 - trimmingbuilt in 1988Masch.-No. 0-260-01-2188/0-260-01-2746required space ca. 1100 mm x 1100 mm x 1700 mmlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revision,without guarantee and warranty

Condition: good (used), Year of construction: 2002, We are selling a Brandt edge banding machine 0 KD 79/2 CF The machine has a pre-milling unit and is fully functional. Edges from 0.6-15mm possible Dqwib7

Condition: excellent (used), Year of construction: 2014, I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2014: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment servo driven Material height 8-50mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1320kg Plus one additional glue tank included. Bsjgxwpftis Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: good (used), Edge bander Brandt type: KD 86 year of manufacture: 1993 for veneer material thickness up to 12 mm glueing from the roll up to 3 mm with pneumatic clipping station glueing application unit with Quickmelt-container solid built pressure zone with 4 rolls clippping for for front and back router station flush, chamfer second router station radius R 3 mm corner copying radius spoke shave R 3 mm wood dust collecting box Curojhl ploshing station pneumtic package for polishing station extendable support bar for big parts operators panel in head height space need approx. 6100 mm

Condition: used, machine/vehicle number: 005793, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Ic23Wxoqe Max feed speed: 11 m/min

Condition: good (used), Brandt optimat KDF 340 edgebanding machine pre-mills glue application pneumatic pre-application guillotine pressure rollers pre-cutting balls top and bottom milling unit R1 - R2 profile cyclin R1 polisher Bnrdt7T9X3J max part height 50mm max thickness of veneer in a roll 3mm feed rate 11m/min machine length 350cm air demand 6 bar machine checked and tested, fully meets its functions

Year of construction: 1988, Condition: reconditioned (used), for simultaneous upper and lower flush milling of protruding edge materials on straight edges as well as curved workpieces with inner and outer radii Equipped with stop rails for straight edges and centric stop rings for shaped parts workpiece thickness approx. 12 - 60 mm workpiece width min. approx. 30 mm inner radius min. approx. 45 mm edge thickness max. approx. 1 mm milling motors 2 x 0,26 kW, 3.000 rpm/50 Hz Electric 380 V, 3 Ph., 50 Hz, pneumatic connection 4 bar working height 850 mm Cross-cutting device EK 11 for exact trimming of edge material protrusions on workpiece ends with straight and curved edges edges mounted on F 10 workpiece thickness approx. 10 - 60 mm edge material thickness max. approx. 1 mm cross-cut tool diam. 100 x 32 x 3 mm Hjnfnuyutt Z = 20 drive 1 x AC motor via toothed belt on tool shaft power 0,37 kW Speed 3.000 rpm Electrical 380 V, 50 Hz, 3 Ph.

Condition: used, machine/vehicle number: 006458, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Gkm89W Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Maximum panel thickness: 50 mm

Condition: used, machine/vehicle number: 006723, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Begd7Wa Max feed speed: 11 m/min

Condition: used, machine/vehicle number: 007517, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Cv9Jamat Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 007240, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Hu3O8Is

Condition: used, machine/vehicle number: 005503, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Cbksfzkg Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 16 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 006216, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Ci29Hzx8Ob

Condition: used, machine/vehicle number: 007251, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Bokpzqhdfu8 Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 006719, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Dnckrh