Used Multirip Saw Paul for sale (46)

Year of construction: 2021, condition: new, −−−− Panel Data −−−− − Type of panels: Particle board, MDF − Top panel face: raw, uncoated − Bottom panel face: raw, uncoated − Panel geometry: plane−parallel / not warped or bent − Panel density particle board: 550 kg/m3 − Panel density MDF: 650 kg/m3 − Panel length: 2500 − 2800 mm − Panel width: 1100 − 1250 mm − Panel thickness: 15 − 55 mm −−−− Multirip Circular Saw −−−− − Type of feeding system: automatic, locally provided − Application: Multi−ripping using a fixed saw set−up including edge−hogging on both sides − Edge hogging on the left: approx. 3.0 − 4.0 mm − Edge hogging on the right: approx. 3.0 − 4.0 mm − Minimum strip width: 32 mm − Maximum strip width: 45 mm − Tolerance on ripping width: +/− 0.2 mm − Feed speed: approx. 15 − 50 m/min. − Driving power top saw shaft: 55 kW − Driving power bottom saw shaft: 90 kW −−−− General −−−− − Working height: 900 mm − Operating voltage: 400 V/50 Hz, 3 phase (C1−C2−C3−N−PE // TN−C−S) − Number of dust extraction outlets: 4 − Diameter of dust extraction outlets: 250 mm − Air speed: 30 m/sec. − Dust extraction capacity: approx. 21200 m3 per hour MULTIRIP CIRCULAR SAW K34G−UU/1500 Right−hand design − Basic machine designed to accommodate two bottom saw shafts with hydraulic vertical adjustment, arranged one after the other, for the fixed set−up of circular saw blades or milling cutters − Hydraulic height adjustment of top rollers − Mechanical setting of top roller pressure − Continuous insert tables made of laminated wood placed above the saw shafts − Saw shaft loading carriage − Main dust extraction device at the bottom with outlets on the infeed and outfeed side − Noise and dust enclosure with viewing window − Door with safety interlock incorporated in the tilting machine hood on the driving side, for changing the saw shaft with the machine running − 9 bottom knurled steel feed rollers (7 powered) − 13 top polyurethane−ring covered feed rollers (all powered) − Max. saw blade diameter: 270 mm − Cardan feed drive system for top and bottom feed rollers (and brush rollers, if included), consisting of gearbox with ball bearing spur gears, axletrees serving as drive shafts in the area of the rollers to be driven, power transmission to the rollers via cardan joints − Built−in table with bevelled front edge, 250 mm − Speed of saw shafts 4500 rpm − Feed speed infinitely variable from 5 − 50 m/min. by frequency−controlled gear motor 2.2 kW, with normal accessories, without tools − In case of manual removal of the workpieces directly after the machine, the maximum feed speed must be limited to 35 m/min. according to the European regulations. CONTROL SYSTEM M34G MULTIRIP SAW CONTROL SYSTEM − Siemens SIMATIC HMI touch screen − 7" colour display − Siemens S7xx control − control equipped with remote maintenance and thus easy to service − controlled top roller height − controlled saw shaft height − product−specific programming possible (feed speed, material thickness, saw shaft height, ...) − interfaces to the locally provided master computer on inquiry − intuitive control due to the clearly arranged design − signal exchange with the workpiece feeding system − signal exchange with the workpiece removal system Knsdpfx Aji Dylfoffof − "Industry 4.0 ready"

Condition: excellent (used), max cutting height 80 mm max workpiece width 700 mm spindle working width 720 mm max disc diameter 230 mm disc bore diameter 80 mm Knedjxciyiepfx Affsf

Year of construction: 1995, condition: ready for operation (used), This Paul Reinhardt K34G / 1500 panel saw was manufactured in 1995. It features a multi-blade saw with a feeding and stacking system, ideal for efficient panel cutting operations. Contact us for more information. Knodpfjx D Rd Ssx Affjf Application Types Sawing (Wood)

Condition: excellent (used), Catalogue number 7386 TECHNICAL DATA - max. saw blade diameter: 500mm - spindle diameter: 30mm - hydraulic clamp serves as blade guard - hydraulic blade stroke - max. cutting width: 550mm - 4 sliding rollers in the table - top feed roller, toothed and pressure type - max. cutting height (in the centre): 100mm - main motor: 5.9 kW - extraction port diameter: 100mm, 120mm - table dimensions: 700x630mm - table height from base: 830mm - infeed roller table - roller diameter: 350mm table size: - length/width: 4480x700mm - motor: 0.75kW - outfeed table (belt) - belt width: 510mm table size: - length/width: 3130x800mm - motor: 0.75kW - machine dimensions (L/W/H): 890x910x1200mm - total weight approx.: 900kg – Infeed and outfeed table – Hydraulically adjustable blade – Used saw, in very good condition Net price: 24,900 PLN Net price: 5,930 EUR based on 4.2 EUR rate Knjdpfxst E Silo Affsf (Prices may vary with greater fluctuations)

Condition: used, Year of construction: 1988, On offer: Ksdjx Dxy Uspfx Affjnf A multirip saw by PAUL Brand: PAUL Model: K34C/800 Year of manufacture: 1988 Machine type: Multi-blade rip saw / Multirip Feed width: 800 mm Max. cutting height: approx. 100 mm Saw blade diameter: 100–280 mm Feed speed: up to 50 m/min Power connection: 3 × 380 V / 50 Hz Connected load: 17.2 kW Rated current: 35 A Protection: 50 A slow-blow fuse Control voltage: 220 V / 50 Hz Ideal for fast and precise ripping of panel materials: chipboard, MDF, OSB, solid wood, plastic and composite panels (including GRP/CRP, fiber cement) Perfect for furniture parts production, battens and batch cutting.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 99.128351, DOUBLE MULTI RIP SAW 1400 MM. TOP+BOTTOM SHAFTS. MOTOR KW 55 / A 102 Knedpfxjx Dth To Affjf MACHINE OFF / DIRECT OUT OF RUNNING PRODUCTION 6-7 YEARS AGO. CONDITION IS GOOD. require brochure /leflet

Condition: like new (used), functionality: fully functional, Tool shaft for multi-saw PAUL K34G Ksdpfx Aoqwg Swsffenf total length 850mm diameter 100mm

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98125446, saw blade diameter: 500 mm, cutting height (max.): 75 mm, positioning accuracy: 1 mm, cutting width (max.): 180 mm, CNC full optimization cross-cut sawline PAUL 11MKL for soft and hard wood. Line include : infeed conveyor with length 11525 mm, double side table for marking wood defects, measuring station with luminescence and light barrier for wood start and end detection, sawing station and outfeed conveyor 11500 mm sorting line with 5 side pushers to sorting table. Wood input length 2000-6000 mm Wood width 30-180 mm Wood thisckness 6-75 mm Min cross-section 30x15 mm or 45x6 mm Max cross-section 130x75 mm or 180x45 mm Saw blade diameter 500 mm Kedpoxrr S Hefx Affenf Saw motor 5.5 kw , saw stroke pneumatic, saw cycles 0.4 sek Feed speed max 200 m/min Power consumption 11.4 kw Control software CNC MAXI 5 Premium Line is in full working condition

Condition: refurbished (used), Year of construction: 2015, operating hours: 2,500 h, We are selling a Paul KME2 1000 R edger. The machine has worked for 3 years in single-shift operation, shows signs of use, is mechanically sound, and has passed a technical inspection by the company. 1000 mm cutting width, 120 mm cutting height, control from the operator panel. Kodpov N Rv Aefx Affonf

Condition: good (used), Year of construction: 1987, functionality: fully functional, Besaumer Paul Kme 2/750 Left, fully hydraulic, 22 kW, with electrical system Kedpfoxq Hlrox Affsnf

Condition: excellent (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, cutting height (max.): 160 mm, height adjustment type: hydraulic, Technical Description – Double Edger PAUL KME-750-L (Year of Manufacture 2012) The machine offered is a double edger of the type PAUL KMEZ-750-L, year of manufacture 2012. The machine is in good condition and ready for immediate use. It is ideally suited for precise edging of wood in industrial applications. Technical Data: • Machine No.: 12242770 • Year of manufacture: 2012 • Net weight: approx. 1,500 kg Drive & Electrical: • Connected load: 38 kW • Supply voltage: 400 V / 50 Hz • Rated current: 71 A • Circuit protection: 80 A • Control voltage: 24 V DC Saw technology: Kedpfsxpua Usx Affsnf • Saw blade speed (min/max): 250 / 380 rpm • Bore diameter: 75 mm • Saw motor speed: 3,200 rpm Hydraulics & Pneumatics: • Hydraulic pressure: 60 bar • Pneumatic pressure: 6 bar Equipment: • Infeed rollers for easy material feeding • Integrated alignment scanners for automatic positioning • Batten sleeve • Waste block separator • Outfeed table for orderly material discharge This high-quality machine from PAUL is designed for continuous use in industrial wood processing and is equipped with practical additional features that enable efficient workflow.

Condition: reconditioned (used), - Paul cross-cut saw 17 AP - pneumatic saw stroke - 150 mm cutting height - 400 mm max. cutting width Knedpfx Aovkfuioffsf - 2 non-driven roller tables, each 2,000 mm long

Condition: new, new spacer rings of different thickness for PAUL KME 2 and BM, with bore 75 mm, new carbide tipped saw blades 300 Ø and 380 Ø x 75 Ø, new CV saw blades hard-chrome plated different Ø Kedpfx Afsh Anyfsfonf

Condition: not inspected (used), functionality: unexamined, MULTIPLE CIRCULAR SAW PAUL K 34G/1500 OCCASION TECHNICAL FEATURES: Kodpfx Afouryrnofonf - DRAGGING SYSTEM RUBBERIZED ROLLERS. - USEFUL DRAG WIDTH OF 1.500 MM. - MAIN ENGINE POWER 37 KW (50 Cv) - ELECTRONIC VARIATOR REDUCER MOTOR OF DRAGGING 3 HP AND 2-48 M/MIN - MAXIMUM SAW DIAMETER 300 MM - CUTTING HEIGHT MAX 100 MM

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 700 mm, saw drive: 31,000 W, total length: 17,000 mm, total height: 1,000 mm, height adjustment type: mechanical, total width: 2,500 mm, Double-edge circular saw with conveyor rollers from Paul Type: PKAH Year of manufacture: 1989 5-meter driven conveyor rollers 2 x 5-meter non-driven conveyor rollers With side-mounted board removal belt Total L x W x H: 17 x 2.5 x 1 meter Boards up to 70 cm wide and 16 cm thick can be edged. Width electrically adjustable. Height mechanically adjustable. 400 V Max. 63 A 31 kW Knsdpfx Afowa T Dcsfsf Please contact us if you are interested or have any questions.

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Kedpfx Afot Amc Isfsnf

Year of construction: 1993, condition: used, - working width (mm): 2200 - engine power (kW): 22 - top rollers: with PU rings Kjden I Twyjpfx Affjnf - bottom rollers: knurled - Saw shaft: included

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm passage width • Saw shaft newly fitted with bearings • 18.5 kW drive motor • 1 fixed bushing Knjdpow Slwkjfx Affsf • 1 slatted bushing, approx. 300 mm usable clamping length • 1 adjustable bushing • 50 mm saw shaft diameter • Mechanical height adjustment of upper rollers • Vibratory chute in the machine • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop inspected • Machine newly painted • Approx. 5 m long roller table in front of the saw • Approx. 4 m long roller table after the saw

Condition: excellent (used), Circular saw flat motor KATT 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second stub shaft for hydraulic pump drive with pulley 150 mm Ø, tested and with new bearings. Kodpjh D Rt Asfx Affenf

Condition: reconditioned (used), - Paul crosscut saw 15 AO - hydraulic saw stroke - 150 mm cutting height - 500 mm max. cutting width Knjdsw Slgfopfx Affef - 1 non-driven roller conveyor approx. 1,600 mm long

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 750 mm passage width • 125 mm cutting height • 18.5 kW saw motor • Mechanical quick width adjustment • Saw shaft newly mounted • 1 fixed bushing • 1 adjustable bushing • 50 mm saw shaft Kedpjwt N N Uefx Affenf • Manual upper roller height adjustment • 2 used saw blades • Stepless feed speed 0–50 m/min • Machine workshop inspected

Condition: used, Complete sawmill, for now only for sale as a whole. Reservation for individual purchase possible at any time. Sawmill consisting of: 01. Log infeed 3-strand Mayrhofer with separator with inserter Total length: 8 meters Width: 3.5 meters 02. Fully hydraulic carriage Mayrhofer with auxiliary carriage with rails Track gauge: 90 cm 03. Pini & Kay FN65 HH frame saw Passage width: 650 mm Drive motor: 33 kW With saw blades With suspension With intermediate gear With splitting wedge With scraper conveyor for sawdust 04. Frame roller table with 3 extractors and steep conveyor Ksdjwptuyjpfx Affsnf Length: 8.5 meters Width: 1.8 meters Roller width: 1.6 meters 05. Extraction table 4-strand Length: 4.5 meters Width: 2 meters 06. Steep conveyor 4-strand Conveyor length: 3.6 meters Width: 3.8 meters 07. Double edger Paul KME 2 0-line left Right-hand machine Drive motor: 22 kW With 2 under-table crosscut saws With hydraulic roller lifting With hydraulic width adjustment With sliver separator With extraction table/cross conveyor for slivers With elevator for main material With conveyor belt With spiral roller conveyor With manual box sorting (10 boxes/carts) 08. Sharpening room consisting of: Frame saw sharpener Vollmer CNHV 1978 Set device Loroch SGB 6 1983 09. Drying chamber Vanicek Internal dimensions: Length: 4.53 m Width: 9.16 m Height: 4.4 m External dimensions: Length: 4.6 m Width: 9.3 m Height: 4.62 m Location: Austria, near Vienna

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Standard configuration Machine included: - Fence Knodpfjuqdwxex Affsf HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: used, tank capacity: 1,969 l, GENERAL Design: suspended Remarks: 2 support brackets made of V2A (support surface reversed; see photos) Rotational speed: 571 rpm Knodpfxjxqa Sle Affof Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be checked) Overall height: 3,800 mm Heating/Cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: bolted lid Shaft sealing: mechanical seal without thermosiphon vessel Agitator: propeller Pedestal type: bracket Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,969 liters Double jacket volume: 70.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 2,110 mm Previous use: Pharmaceutical chemistry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: DN80 flange Note: slight residues MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 220/380 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.7 mm Agitator arrangement: eccentric in the top head Agitator equipment: technical documentation for agitator available

Condition: used, Paul double-edged planer KM2, good condition, 9.6 kW, cutting length 590 mm, cutting height 80 mm Ksdjx H Uhvopfx Affonf Subject to price changes, errors and misprints excepted.