Used Packet Cross Cut for sale (21,971)

Condition: used, Number of milling spindles 2 St. fence 1 St. workpiece ja yes STEGHERR Cross rung milling machine, Type KSF-mini ----- Including stop ruler with measuring scale and sliding stop. Fsdpfewi Upfjx Ag Dopr Tools included. Specialized jointer for the efficient production of cross-mustard joints. The KSF-mini cross-mustard jointer is the product of STEGHERR's extensive experience in building these specialized jointers for cross-mustard joints. With the KSF-mini, all common cross-mustard joints can be produced quickly and precisely. Even profiled joints can be machined on the KSF-mini. Precise routing is achieved because the workpiece is machined on three sides in a single clamping operation. The tool is driven by two three-phase motors; the workpieces are clamped pneumatically. The profile cutter is designed for the joint width. The saw blades that perform the flattening can be adjusted to the dimensions of the profile cutter using spacers. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. Motor: 2.2 kW, 380 V, 50 Hz Pneumatic pressure: 6 bar Included: ----- Table base Foot switch Tools as shown in the pictures: 1 profile cutter 3 saw blades (corresponds to a 10 mm web width) Fence ruler with measuring scale and sliding stop as shown in the pictures. Installation dimensions approx. L x W x H: 1,330 x 570 x 1,430 mm Weight: approx. 150 kg (All technical specifications according to the manufacturer, without guarantee!)

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 209070, CASATI BIT 900/2000 veneer cross-cutting machine. Fully functional. Fjdouna E Hepfx Ag Djpr

Condition: used, Year of construction: 2013, SECOND-HAND CROSS-CUTTING VENEER PACK GUILLOTINE CASATI MOD. TO/CC1450 Fsdpfx Agev Tczlo Dopr - Cutting lenght mm. 1450 - Pressor stroke mm. 100 - Max. rear feed width mm. 600 - Min. rear feed width mm. 25 - Hydraulic unit motor power kw 3 - Rear feed motor power kw 0,37 - Year 2013

Condition: excellent (used), Spindle speed: 3,000 rpm Max. workpiece length: 500 mm Cut-off wheel: Ø 180 x 1 mm Cup wheel: Ø 100 x 20 mm Dimensions: approx. 430 x 360 x 500 mm Weight: 90 kg Fpjdpfow Hbqwjx Ag Dsr

Condition: as good as new (ex-display), Year of construction: 2019, 380 V Pneumatic Fodpfx Agjtgkwfe Djpr

Condition: ready for operation (used), Cross Bar Milling Machine Manufacturer: Stegherr Fodpfow Imhcsx Ag Dspr Model: KSF Suitable for milling cross bar joints, e.g., in windows, doors, and furniture Equipped with 3 milling units An upper and a lower milling unit simultaneously mill the two mitre-like cut-outs A third unit simultaneously performs the flattening The machine table is moved pneumatically-hydraulically. The forward and return speeds are adjustable. With foot switch 2 motors, each approx. 2.2 kW Total connected load approx. 4.5 kW Compressed air 6 bar Voltage 380 V 50 Hz Extraction connection diameter 180 mm Incl. 3 milling tools

Condition: used, DIMENSIONS: HEIGHT 100 mm WIDTH 270 mm ELECTRONIC PUSHER LENGTH 6100 mm SAW BLADE MOTOR 4 kW Fsdpfew E Eudex Ag Depr

Condition: good (used), GRECON 3001 CROSS CUTTING OPTIMIZER Fpsdpfsqzh Inox Ag Djr A.COSTA VOLLMER ARTIGLIO PRIMULTINI STORTI We also have all kind of Sawmill machines

Condition: excellent (used), SCM internships in excellent condition Fpsdjt Hkq Rspfx Ag Der

Condition: used, Year of construction: 2003, The machine is in perfect working condition. Fodpfx Agjgrn Emj Dspr

Condition: new, Year of construction: 2025, Max. cutting section mm. 610x30 / 520x100 / 420x150 Structure completely in painted steel of large thickness and reinforced. Solid anchoring system to the ground with flanged steel feet for the hole. Fpsdpfxjwk Ipho Ag Dsr Two-hand safety cutting controls in ergonomic position. Independent pneumatic adjustments to adapt to the different types of processing. Progressive starter compressed air in supply. Cutting speed easily adjustable via pneumatic regulator, on the control panel. Cutting time adjustable from 0.5 to 2 sec. Cutting speed adjustable via pneumatic regulator on the control panel. CUTTING UNIT: Cutting unit with extremely robust horizontal plane, equipped with galvanized idle rollers with capacity 600 kg, diameter 89 mm, width 500 mm. Tilting cutting movement with power transmission via a group of belts. Structure in thick and highly robust sheet metal. Ideal motor/blade weight balancing system. End-of-stroke shock absorbers. Swing with bearings. Motor anchoring with easy adjustment for perfect 90-degree cuts. Easy maintenance with easy access. Blade motor power HP = 14.8 (11 kW). HM circular blade, diameter mm. 600. Cutting edges Z = 108. Hole diameter mm. 35 Upper piece locking presser with electro-pneumatic management. External speed and pressure adjustment on the control panel. Intelligent presser: Automatic adaptation to the thickness of the wood, thus significantly reducing cutting times Presser movement system via new ball bearing slides with double dust protection and automatic lubrication system. Long-lasting and easily interchangeable aluminum blade guards. The entire system is equipped with individual and independent pneumatic adjustments, external on the control panel, to adapt to the different types of work to be performed.

Condition: new, Year of construction: 2025, DOUBLE CROSS CUTTING MACHINE ANGOMAC Double cross-cutting machine, ideal as line machine, for pallet elements production. Fpedpfxjfclpfs Ag Dor cutting lenght from 650 to 6500 mm max thickenss 200 mm

Condition: refurbished (used), PALLET LINE MULTIBLADE AND CROSSCUTTING MACHINE A.COSTA VOLLMER ARTIGLIO PRIMULTINI STORTI Fpedpfx Asqag T Asg Djr We also have all kind of Sawmill machines

Condition: new, Year of construction: 2025, Max. cutting section mm. 280x95 / 240x125 / 340x15. Structure entirely in thick and reinforced painted steel. Solid ground anchoring system with flanged steel feet for the hole. Ergonomic two-hand safety cutting controls. Independent pneumatic adjustments to adapt to different types of work. Compressed air progressive starter in supply. Cutting speed easily adjustable via pneumatic regulator, on the control panel. CUTTING UNIT: Cutting unit with horizontal plane. Structure in thick and highly robust sheet metal. Ideal motor/blade weight balancing system. Shock absorbers at the end of the stroke. Swing with bearings. Motor anchoring with easy adjustment for perfect 90 degree cuts. Easy maintenance with easy access. Solid ground anchoring system with adjustable steel feet with perforated flange. Blade motor power HP=7.5 (5.5 kW). HM circular blade, diameter mm. 500. Cutting edges Z=108. Hole diameter mm. 35 Adjustable cutting time from 0.5 to 2 sec. Adjustable cutting speed via pneumatic regulator on control panel. Fpedpfx Agjwk Hime Dor Upper piece locking presser with electro-pneumatic management. External speed and pressure adjustment on control panel. Intelligent presser: Automatic adaptation to wood thickness, thus significantly reducing cutting times Presser movement system via new ball bearing slides with double dust protection and automatic lubrication system. Long-lasting and easily interchangeable aluminum blade guards. The entire system is equipped with individual and independent pneumatic adjustments, external on control panel, to adapt to the different types of work to be performed.

Condition: like new (used), Device for cleaning die-cut sheets Fsdpewyxi Rjfx Ag Depr German production, Metabo. 230V power supply. Easy-to-use, manual device for removing external waste from the pallets of die-cut sheets. Safe, two-handed operation of the device.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, rotational speed (max.): 10,000 rpm, Control system: Heidenhain iTNC 530 Technical specifications: Travel distances: X-axis: 1,100 mm Y-axis: 610 mm Z-axis: 610 mm Rapid traverse (X/Y/Z): 32 m/min Feed rate (X/Y/Z): 12 m/min Distance table surface – spindle nose: 120 – 730 mm Maximum speed: 10,000 rpm Torque: 332 Nm Drive power: 13 kW Fpsdpex Hfnmofx Ag Dsr Tool holder: SK 40 Tool positions: 30 Table dimensions: 1,250 x 610 mm Maximum table load: 900 kg Connected load: 35 kW Machine weight: 7,500 kg Chip conveyor Internal coolant supply (ICS): 22 bar Coolant tank capacity: 250 liters Air through spindle center

Condition: like new (used), Year of construction: 2022, operating hours: 65 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness copper (max.): 30 mm, sheet thickness brass (max.): 30 mm, total width: 1,500 mm, total length: 3,000 mm, table length: 3,000 mm, working width: 1,500 mm, table width: 1,500 mm, Equipment: documentation/manual, Slightly used Swift Cut Pro 3000 with Hypertherm 125A power source. Fpsdpfsx E At Rsx Ag Dor

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2024112326, CUT-CREASE-FOLD Max cut size - 600*900mm Operating mode - Vacuum absorption Cutting accuracy - 0.01mm Head - 2 blade heads Fsdpfjx Ezk Iex Ag Dopr Repeat Accuracy - 0.05mm Maximum uncut running speed - 800mm/s Max cutting speed - 700mm/s Force - 2000g Output modes - U disk/WiFi/USB Power

Condition: excellent (used), Stainless Steel Cut to Length Line • Coil Weight: 2 tonnes Fjdpswbzbxofx Ag Depr • Coil Width: 100 – 500mm • Cut Length: 150 – 500mm • Thickness: 0.30 – 1.0mm • Max Coil O/D: 500mm

Condition: excellent (used), Hydraulic Guillotine Shear (used) Manufacturer: VOLZ Euro-Cut Model: 6.5 x 3050 Year of manufacture: 2002 Max. cutting length: 3050 mm Fpsdex Ag Scopfx Ag Djr Max. plate thickness (ST 45): 6.5 mm Distance between side frames: 3050 mm Motorized back gauge adjustment: 20 – 1000 mm Cutting angle adjustment: hydraulic Hold-down clamps: 18 pieces Motor power: 11 kW Machine weight: approx. 5100 kg Required space: Width 3830 mm, Depth 2865 mm, Height 1700 mm Foot switch Angle stop Front support arms Motorized back gauge adjustment Cutting edge illumination The machine is in very well-maintained condition and is immediately ready for operation. Forklift available, free loading onto truck Low-cost shipping available Machine location: 59510 Lippetal

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, working range: 3,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, table height: 1,750 mm, table length: 3,710 mm, working width: 1,500 mm, table width: 1,960 mm, We are selling a Swift-Cut 3000XP CNC plasma cutting center with a Hypertherm MAXPRO200, purchased mid-2023. The machine has seen very little use. According to the manufacturer, the maximum sheet thickness is 50 mm; we have cut sheets up to 40 mm thick. The cuts were clean and straight, with minimal slag. Piercing in the middle is possible up to 32 mm thickness. Fjdsxxighspfx Ag Djpr The machine offers online support from Swift Cut in both English and German. Solid Edge software is installed on the machine. The machine is immediately available. We are planning to invest in further production equipment. The unit is located at our subsidiary in the Czech Republic – Vrbno pod Pradědem.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working range: 3,050 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 220 mm, positioning accuracy: 0.015 mm, input voltage: 400 V, table length: 3,050 mm, operating speed: 250 mm/s, table width: 1,525 mm, pressure: 4,137 bar, positioning speed: 15 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, table height: 840 mm, operating pressure: 4,137 bar, input current: 77 A, total height: 1,300 mm, total length: 4,210 mm, total width: 2,130 mm, water pressure: 2.8 bar, pump pressure: 4,137 bar, overall weight: 3,850 kg, working length: 3,050 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, 2017 Swiftcut Swift-Jet CNC Waterjet Cutting Machine – Under 900 Hours Use High-Precision CNC Waterjet Profile Cutter – Low Hours, Excellent Condition – Now Available at Used Machine Tools Ireland Ltd 🔍 Overview: We are offering this 2017 Swiftcut Swift-Jet Waterjet Cutting Machine, a top-tier solution for high-precision, cold-cutting of a wide range of materials including metal, stone, plastic, glass, and composites. With less than 900 operational hours, this machine is in superb condition and ideal for any business seeking reliable, accurate, and versatile cutting performance. 🛠️ Machine Specifications: Brand: Swiftcut Model: Swift-Jet Year of Manufacture: 2017 Technology: CNC Waterjet Profile Cutting Cutting Area: [Insert size, e.g. 1250mm x 2500mm if known] Hours Used: Less than 900 hours Pump Type: High-pressure waterjet pump Cutting Method: Abrasive and pure water capability Software: Swiftcut Control Software (user-friendly, intuitive interface) Table Dimensions: 3000 x 1500mm Max Sheet Size: 3050 x 1525mm (10' x 5') Max Traverse Speed: 15m.min Max Z Axis Clearance: 220mm Positional Accuracy: 0.015mm Tank Depth: 840mm Max Pressure: 60,000psi(4137bar) Continuous Pressure: 60,000psi Min. Piercing Pressure: 20,000psi Max Output Flow: 3.8l/min Max Orifice Size: 0.36mm Min Orifice Size: 0.13mm Cutting Water Infeed: 7.6l/min Water Pressure Infeed: 2.8bar Pump Voltage: 400V/77A Pump Power: 37kW/50HP Machine Voltage: 1ph/16A Water Treatment Voltage: 1ph/10A Garnet Hopper Voltage: 1ph/10A Machine Dimensions: 4210 x 2130 x 1740mm Pump Dimensions: 1850 x 920 x 1300mm Machine Weight: 2400kg(empty) Pump Weight: 1450kg 🌟 Key Features: Cold-cutting process – no heat-affected zones, preserving material integrity Fjdpfxowb D S Ho Ag Depr Precise and clean cuts on a variety of materials and thicknesses Ideal for metal fabrication, signage, engineering, prototyping, and more Compact footprint, easy installation, and low maintenance Exceptional build quality from a trusted UK manufacturer 🔧 Applications: Perfect for cutting: Mild Steel, Stainless Steel, Aluminium Brass, Copper Stone, Granite, Marble Plastic, Acrylic Glass, Rubber, Composite Materials ✅ Why Choose This Swift-Jet? Very low hours – lightly used and well maintained Excellent condition – ready to work immediately Cost-effective alternative to brand new equipment Supported by Swiftcut's strong reputation for service and performance Take advantage of this rare opportunity to own a high-spec waterjet cutting system with low hours – ideal for precision fabrication. Act quickly – this unit won’t last long! Explore Other Waterjet Options Here: Used Waterjet Cutting Machines Used waterjet cutting machine Ireland, Swiftcut Swift-Jet for sale, CNC waterjet profile cutter, low hours waterjet machine, 2017 Swift-Jet waterjet, metal and stone cutting machine, abrasive waterjet cutter, used CNC cutting machines Ireland, high-precision waterjet cutter, used fabrication equipment for sale

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type Fedpfofv Hphox Ag Dspr to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: good (used), Marel SC90 Salmon Slicer Salmon Slicer Model: SC90 Silk Cut 11 D Cut slicer Single Lane With adjustable slice thickness and angle Up to 90 slices per minute Slice angle: 8-20 degree Dual frequency 50/60Hz Fodpfjv Dmz Dsx Ag Dopr

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Fpodsu Tg I Dspfx Ag Djr Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.