Mitre cross-cut saw for aluminum (special machine construction with 4 servo motors), circular saw, m

Fixed price plus VAT

€1,400

Condition

Used

Location

Hessisch Lichtenau Germany

Mitre cross-cut saw for aluminum (special machine construction with 4 servo motors), circular saw, m

Show map

Machine data

Machine type:: Mitre cross-cut saw for aluminum (special machine construction with 4 servo motors), circular saw, m

Condition:: used

Price & Location

Fixed price plus VAT

€1,400

Location:: 37235 Hessisch Lichtenau

Call

Details about the offer

Listing ID:: A3847127

Reference number:: 53704

Update:: 20.02.2026

Description

Miter cross-cut saw for aluminum (special machine construction with 4 servo motors)
Circular saw, miter saw, rip saw
year of construction 2002
Saw blade diameter 500 mm
Sawing range at 90° round Ø 180
Rectangle 350 x 140 mm (through longitudinal cut)
Sawing range at 45° round Ø 180
Rectangle 350 x 100 mm (through longitudinal cut)
Guide length of base support 1100 mm
Travel on the base support (forwards and backwards) 650 mm
Travel on the stand (up-down) 120 mm
Saw blade speed approx. 3000 rpm
Motor power 2.2 kW
Mains connection 400 Volt, 50 Hz
- Controlled longitudinal cutting movement
- Controlled saw blade height adjustment
- Controlled mitre cut through swivelling saw unit
- Controlled miter cut by tilting saw unit
- Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears
(MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor)
Dujdpfsdzp T Dex Adajr
- Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor)
- a total of 4 Indramat servomotors are installed
- very good German mechanical engineering
Space requirement L x W x H 1150 x 1100 x 1400 mm
weight approx. 360 kg
good condition

The unit comes from a special machine for special products.
All other components and electrical parts for the construction of a new special machine
are also available.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2013

598 listings online

Call

Send inquiry

Telephone & Fax

+49 5602 ... show

Fax:

These listings may also fit your interest.

Auction

Horizontal machining center Pinnacle LH 500B

Baden-Württemberg

18,541 km

Horizontal machining center
PinnacleLH 500B

€19,900

To the auction

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,447 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, table width: 500 mm, table length: 500 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 560 mm Travel Z-axis: 560 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 24 m/min Table width: 500 mm Table length: 500 mm Table load: 400 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,445 x 3,055 x 2,200 mm Total weight: 7,000 kg Spindle hours: 2,447 h Djdpsytnf Hofx Adaeur EQUIPMENT Automatic pallet changer 4-axis design incl. B-axis (table rotation)

See details

Listing

Budapest

17,968 km

Heavy duty shelf
ROSSIT

Call

Condition: used, Beams: 2700x120x50 mm 63 units Frames: 5200x1000x95 mm 17 units 4600x1000x90 mm 4 units 2300x1000x95 mm 2 units If you require racks or accessories in different configurations or versions, please contact us. We offer a comprehensive range of new and used racking systems and accessories, and are happy to assist you with your planning. Dujdpfx Ash Izr Uodajr Further accessories available, such as: Frame, corner, and collision protection, push-through guards, chipboard panels, wire mesh shelves, rear mesh panels, depth bars. Shipping: Please enquire about shipping costs, specifying your postal code, location, and the quantity of items required. Additional services: Planning, rack assembly/disassembly, purchase/sale Technical data, specifications and prices are subject to change and errors. Previous sale reserved!

See details

Auction

Baden-Württemberg

18,541 km

CNC lathe
DMG MORIALX 1500/300

€19,900

To the auction

Condition: ready for operation (used), Year of construction: 2022, operating hours: 113 h, functionality: fully functional, machine/vehicle number: AL150210302, turning length: 336 mm, turning diameter: 440 mm, spindle bore: 61 mm, spindle speed (max.): 6,000 rpm, controller model: DMG MORI COMPACT LINE, No reserve price – guaranteed sale to the highest bidder! Only 113 operating hours! TECHNICAL DETAILS Turning length: 336 mm Turning diameter: 440 mm Maximum bar diameter: 52 mm Swing over bed: 620 mm Swing over cross slide: 465 mm Spindle speed (max.): 6,000 rpm Number of spindle speed ranges: 1 step Spindle bore diameter: 61 mm Spindle bearing inner diameter: 100 mm Tool shank diameter for square tools: 20 mm Tool shank diameter for boring bars: 32 mm X-axis travel: 260 mm Z-axis travel: 375 mm X-axis rapid traverse rate: 30,000 mm/min Z-axis rapid traverse rate: 30,000 mm/min Number of tool magazine positions: 12 MACHINE DETAILS Dusdpfx Adsytbqveaer Control model: DMG MORI COMPACT LINE Frequency: 50 Hz Operating hours: 113 h EQUIPMENT Coolant system Chip conveyor

See details

Auction

Nordrhein-Westfalen

18,536 km

Machine vice
HILMA RÖHMHELDF 125

€450

To the auction

Listing

Nevers

19,092 km

Machining center
EMMEGIPHANTOMATIC T3A

€28,000

Fixed price plus VAT

Condition: ready for operation (used), Technical characteristics AXIS TRAVEL X AXIS (longitudinal) (mm) 4300 Y AXIS (cross) (mm) 270 Z AXIS (vertical) (mm) 300 ELECTRO-SPINDLE Max. power rating (S1) (kW) 5,5 Max. power rating Max. speed (rpm) 20000 Tool taper HSK 63F AUTOMATIC TOOL MAGAZINE Max. number of tools in the tool magazine 4 standard Max. number of angle machining heads loadable in the tool magazine 2 Max. blade diameter loadable in the tool magazine (mm) Ø 180 FUNCTIONS Multi-piece operation MACHINABLE FACES With straight tool (top face) 1 With angle machining head (side faces and ends) 2 + 2 With blade tool (side faces and ends) 2 + 2 TAPPING CAPACITY (with tap on aluminium and through hole) With compensating chuck M8 Rigid WORKPIECE CLAMPING Standard number of vices 4 Max. number of vices 6 Power and Motors Pluging: Three-phased Dsdpfx Aoundg Usdasur Overall dimensions Lenght: 5000 mm Width: 1300 mm Weight: 2000 Kg

See details

Auction

Nordrhein-Westfalen

18,536 km

Machine vice
HILMASM 160

€450

To the auction

Auction

Nordrhein-Westfalen

18,536 km

Oil drum rack
Oil DrumRack

€70

To the auction

Listing

DYAS PDC 1500 / CNC Plate Drilling Dyas Machinery Dyas PDC 1500

Minareliçavuş OSB

17,176 km

DYAS PDC 1500 / CNC Plate Drilling
Dyas MachineryDyas PDC 1500

Call

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Dujdpsgbfaxofx Adaor Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

See details

Auction

Nordrhein-Westfalen

18,536 km

Oil drum rack
Oil DrumRack

€70

To the auction

Auction

Nordrhein-Westfalen

18,536 km

High-performance spindle
LEHMANNCPS 20

€260

To the auction

Listing

Eccentric Press - Single Column AMBOLD PEEV 25.3

Schmölln

18,293 km

Eccentric Press - Single Column
AMBOLDPEEV 25.3

Call

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 520 x 400 mm no. of strokes 160 Hub/min ram surface 160 x 160 mm ram adjustment 40 mm ram hole 32 H7 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm total power requirement 2,7 kW weight of the machine ca. 1,9 t Dujdpfx Aeb U Hwpedaor dimensions of the machine ca. 1,3 x 1,0 x 1,85 m

See details

Auction

Nordrhein-Westfalen

18,536 km

Chip cart
MULKIChip Cart

€70

To the auction

Auction

Nordrhein-Westfalen

18,536 km

Screw compressor
BOGES 10

€450

To the auction

Condition: not inspected (used), functionality: unexamined, volume flow: 96 m³/h, final compaction pressure: 10 bar, rotational speed (max.): 3,920 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obliges timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Volume flow: 1.6 m³/min Final compression pressure: 10 bar Main rotor speed: 3,920 rpm MACHINE DETAILS Motor power: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 950 x 700 x 1,000 mm Machine weight: 500 kg Dodpfxoyr R H Dj Adaour External reference: Lot 94

See details

Listing

Helmstedt

18,281 km

Film laminating machine
KomfiAspira

€7,500

Fixed price plus VAT

Call

Auction

Nordrhein-Westfalen

18,536 km

LP gas
HYSTERHI.50 XM

€1,200

To the auction

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: D001B02655R, Year of construction: 1994, load capacity: 1,380 kg, lifting height: 3,090 mm, fork length: 1,200 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 04.05.26 and 07.05.26. Dujdsyr R Hqjpfx Adasr TECHNICAL DETAILS Load capacity: 1,380 kg Fork length: 1,200 mm Lift height: 3,090 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 3,300 x 1,000 x 2,200 mm Machine weight: 3,000 kg External reference: Lot 93

See details

Advertise here