Used Packet Cross Cut for sale (17,648)

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Kodpfx Ahodzp T Dsvolp Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: excellent (used), Year of construction: 1994, Automatic defect cross-cut system Wood width max. 260 mm Wood height max. 100 mm Saw 7.5 kW Feed 6 kW worked 1995 - 2012 approx. 4 hours/day Kedpfx Ahjkv Untovslp

Condition: excellent (used), functionality: fully functional, Double miter saw OMS INVINCIBLE OK 330 Maximum cutting length: 3000 mm Maximum cutting width: 140 mm Units adjustable at 45°/-45° Klodpfx Asylm Nushvep Motor power: 2×3HP ~2.2kW Saw blades: 330 mm Pneumatic vertical material clamp

Condition: new, Year of construction: 2026, Cutting height 125x220 mm Kjdeyk Idwspfx Ahvolp machine weight ab. 450 kg Motor output 5,5 kW

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4360x900x1450 mm Weight 560 kg Total power requirement 10 kw Kjdpfx Aoyk H Uhehvelp

Condition: excellent (used), Year of construction: 2019, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 8135.44, cutting height (max.): 100 mm, cutting depth: 300 mm, Great saw Ksdpfx Aeyngnishvolp

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total width: 1,500 mm, total length: 11,300 mm, total height: 1,800 mm, cutting width (max.): 350 mm, saw blade diameter: 550 mm, roll width: 430 mm, spindle diameter: 35 mm, cutting length (max.): 5,300 mm, hole diameter of the disc: 35 mm, CEMIL TR550 semi-automatic cross-cut saw Specification: • condition - used, ready to work • manufacturer - CEMIL • model - TR550 • max working width - 350 mm • max working height - 130 mm • maximum cutting length - 530 cm • blade diameter 550 mm • blade mounting spindle - 35 mm • blade speed - 3080 rpm • right, receiving table 505 cm long • left table 600 cm long • tables and feed 43 cm wide • adjustable cutting speed • adjustable pusher speed • possibility of working in automatic and manual cycle • in the machine, possibility of setting, among others length and number of cut elements, board length, waste length • extraction nozzle - fi 140 mm • weight approx. 280 kg • instructions in Italian, control partially translated into Polish • overall dimensions after unfolding - 11,300 cm x 150 x 180 cm (length x width x height) • body dimensions - 110 x 150 x 180 cm (length x width x height) Additional information: • very good, factory technical and visual condition Klodpfjwa Dhlex Ahvep • the photos show the actual condition of the item for sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT

Condition: new, cutting width max 610 mm Cutting height max 200 mm Saw blade diameter 650 mm Klsdpfx Aeyi Hthohvjp Motor output 11 kW

Condition: used, band length ca. 1.700 mm + 2.700 mm cutting width max. 2.500 mm Kledpfx Aov Hgb Njhvep Cutting height max. ca. 80 mm

Condition: used, Year of construction: 2015, functionality: fully functional, tool diameter: 550 mm, overall weight: 5,000 kg, We offer this used Störi Mantel UKS 850 cross-cut saw, year of manufacture 2015. Machine type: UKS 850 Modification: OPTIM Date of manufacture: 11/2015 Serial number: 215 85 012 Maximum tool diameter: 550 mm Rated voltage: 3×400/50 V/Hz Rated current: 49 A Machine power: 25 kW Air pressure: 0.8 MPa Total weight: 5,000 kg If you have any questions or need further information, please feel free to send us a message or contact us by phone. Kljdpfsyky Uhjx Ahvjp

Condition: good (used), Code: 0228 Brand: OMS SALVARANI Model: 300 INVINCIBILE Pneumatic double croscutting machine for cutting wood, frames, fixtures, joinery, furniture, and various other materials Technical data: Working length mm 3000 Blade diameter mm 300 Motor power Hp 2,5 - Rpm 3000 Manual movement of the 2 heads Cutting from 0 to 45° right and left Kedpfoxnxumex Ahvjlp Pneumatic pedal for lowering the heads N° 2 pneumatic clamps for locking workpieces N° 2 suction ports diameter mm 50 Compressed air 6 bar Overall dimensions mm 4000 x 700 x 1250 h Weight kg 520

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Kljdeuiwqhepfx Ahvop Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Condition: new, Year of construction: 2025, Professional machine for removing defects from wood and wooden elements. It optimizes the cutting process and ensures minimal material losses. The CROSS CUT 306 optimizer is a new technology of wood machines, produced by the leading brand on the Polish market, which is CNC Technologies. The machine provides fast, simple and precise cuts to size, increasing production efficiency. The optimizer performs cross-cutting of the material into sections of a specified length, eliminating material defects marked with a fluorescent pencil and using a sensor to analyze the position of the pencil. It is worth noting that the machine can measure and cut in an automatic cycle. Model: TechnologieCNC CROSS CUT 306-4M Effective machining length - 4000 mm (optionally 6 m) Kledjtvmv Rspfx Ahvep Effective machining width - 30-230 mm Effective machining thickness - 40-80 mm Effective machining in cross-section - 250x30mm Scanning speed - 80m/min Scanning device - Infrared sensor of the German brand SICK Scanning/detection of defects - Fluorescent sensor of the German brand SICK Table height - 800mm Feed speed - 60m/min Pusher servo drive - AC DELTA 750w Saw lift servo drive - AC DELTA 1kW Cutting saw motor - 7.5kW, 3Ph, 2930 rpm. Saw blade diameter - fi 500 mm Extraction port diameter - 100mm x2 Total power: +-10kW Overall dimensions - 6750 x 1450 x 1800mm Transport dimensions: 535 x 80 x 110 - table, 200 x 100 x 160 - console Weight: 1436 kg

Condition: new, Year of construction: 2026, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: Ksdpfjhw Ng Ijx Ahvolp PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device Program creating lists on PC in XML

Condition: used, Year of construction: 2002, total height: 1,870 mm, total length: 2,100 mm, total width: 2,720 mm, Weight: 1.600 kg Price: On request Kjdpeyf H H Hsfx Ahvslp - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 595001 3 16 - Main motor power [kW]: 6.5 - Voltage [V]: 400 - Current consumption [A]: 15 - Fuse [A]: 20 - Transport dimensions: 2100mm x 2720mm x 1870mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, The following used system is available for sale. Should this be of interest to you, I will provide further details if required. 2 x 1500 Combined Cutting Line - 22.9. - 06:29 We offer for sale: 2 x 1500 Combined Cutting Line / Cross, Angular, and Longitudinal Shearing. Klsdpeyigrnofx Ahvep Technical Data: Manufacturer: SCHRÖDER Material width: 1,500 mm Material thickness: 2.0 mm Input coil weight: 10 tons Angle shears: 1,500 x 2.0 mm Rotary shears for cutting: For a coil width of 600 mm: ±50° For a coil width of 800 mm: ±40° For a coil width of 1,000 mm: ±30° For a coil width of 1,500 mm: ±5° Description: The system separates sheets from coils up to a maximum width of 1,500 mm. The coil scale processes 11 tons of material continuously—crosswise, lengthwise, and at angles. Strip cuts can be slit into 4 parts by longitudinal slitters. The system features a straightening unit with a 5-roll leveller, followed by longitudinal slitters, angle shears, a conveyor belt, and a stacking unit with integrated scale. The entire system is designed for cutting sheets from coils into various blanks and panels. The complete line is mounted on a shared frame measuring approximately 5 x 15 meters. It is maintenance-friendly, energy efficient, and in excellent condition. The system is connected and can be tested and demonstrated. Year of manufacture: 1995

Condition: like new (used), Fully mechanized line for splitting and cutting (Masterflex+Paul) consisting in: Kljdpfxekt I Uyo Ahvsp - transverse conveyor for 2 packages - automatic destacking and singularization installation with slat recovery with conveyor included - transverse conveyor for circular feed piece by piece - trolleys on the rail for circular feeding - circular Masterflex provided with 4 movable blades, axis to axis, free passage width of 1,000 mm, cutting height 100 mm - 2 motors of 50 KW, 4 releases electrically controlled by joystick, provided with a control panel - timber evacuation conveyor provided with a waste separator (edges and hems) - waste conveyor + automatic waste cutting pendulum - parts recovery conveyor with return to the operator for repair - transversal conveyor with singularization for feeding optimizer Paul - optimizer Paul model, passage width of 1,000 mm, cutting height of 100 mm, equipped with marking station for defects, with laser (without chalk) - sorting line by optimizer with 20 ejectors. Installation is in a very good working condition.

Condition: excellent (used), Double mitre saw OMS INVINCIBLE OK 330 Maximum cutting length: 3000 mm Maximum cutting width: 140 mm Units adjustable to an angle of 45/-45° Motor power: 2×2.2 kW Ksdeydc Tmjpfx Ahvjlp Saw blades: 330 mm Pneumatic vertical material clamp

Condition: used, Year of construction: 2002, total height: 1,600 mm, total length: 9,000 mm, total width: 2,400 mm, Weight: 2.500 kg Price: On request - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: 1073.14 - Input table length [mm]: 8360 Kljdpfsyddkaex Ahvsp - Output table length [mm]: 2750 - Options: Automatic pusher system - Voltage [V]: 400 - Fuse [A]: 25 - Power [kW]: 11.0 - Transport dimensions: 9000mm x 2400mm x 1600mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, working width 1.700 mm saw-blade dia. 350 mm cutting length 1.200 mm Kledpfx Asycqigohvsp

Year of construction: 1982, condition: good (used), pre-cutting saw Esterer KSG-F year 1982 travelling with swords with control with length measuring with frame with hydraulics Kledpfx Aeip T Dljhvep immediately available Location: Austria, near Vienna

Condition: excellent (used), functionality: fully functional, Cross-cut multi-blade saw for the production of squared timber and turning blanks Ksdpeych N Djfx Ahvolp

Condition: used, Transport 350 EUR Kedpjwna Rxsfx Ahvolp

Condition: used, Year of construction: 2005, total height: 1,750 mm, total length: 1,350 mm, total width: 1,350 mm, Optimization cross-cut saw Stromab TR 500 Matrix 4 4000 Year of construction 2005 Engine power 10 hp Auto push-up system Inkjet printer - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 250143 - Main motor power [kW]: 7.5 - Max. saw width [mm]: 375 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 4300 - Output table length [mm]: 2000 - Transport dimensions: 1350mm x 1350mm x 1750mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Kjdewq U Dxspfx Ahvelp Yorick Diebels

Condition: used, Year of construction: 1999, functionality: fully functional, Crosscut saw, miter saw OMS FC 300 RAP 2.2 kW – after technical inspection Specification: Kjdpfjyg R Spsx Ahvolp • Technical condition – used, after inspection • Manufacturer – OMS • Model – FC 300 RAP • Blade diameter – 300 mm • Saw motor – 2.2 kW • Max. dimensions of workpiece at right angle: 95 x 125 mm (height x width) • Saw blade guards for operator safety • Extraction port – diameter 60 mm • Cutting angle adjustment: +/- 45 degrees (machine does not maintain perfect accuracy at extreme angles) • Year of manufacture – 1999 • CE marking • Overall dimensions without tables: 75 x 75 x 70 cm (L x W x H) Additional information: • The machine is in decent technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to power up and inspect the machine on site • The price listed in the auction does not include VAT or transportation costs Financing and transport: • We organize transport via MDD fleet, courier services, or external carriers • Financial support available in the form of leasing or lease loans