Used P200 for sale (191)

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: N365 OMP 200 151-0615 Hedpsxl Rzgofx Ai Njnk -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 2x aggregate available -Price: per piece -Dimensions: 210/130/H120 mm -Weight: 7.1 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams, compact cylinders -Pneumatic cylinder: ZIDP 200/100 -Stroke: 100 mm Hjdpfx Aisgrzvcs Nenk -Piston diameter: 200 mm -Piston rod: Ø 40 mm -Dimensions: 220/220/H450 mm -Weight: 23.5 kg

Condition: used, Technical details: Hodpfxju N Dmxs Ai Nonk weight of the machine approx.: 18 kg kg dimensions L x W x H: Ø 200 x H: 100 m PERMANENT MAGNETIC ROUND PLATES distance between 5x magnetic cores 36mm, width 20mm force operation 8mm square key (not included) *

Condition: used, Technical details: floor-plate length: 2000 mm plate width: 1500 mm plate height: 820 mm Plate thickness: 185 mm weight of the machine ca.: ca. 2,1 / 2,2 pro Platte t transport dimensions LxWxH: ca. 2,0 x 1,5 / pro Platte m Hjdpfsu N D Rdex Ai Nonk There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x fixing holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for shelf no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for panel no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm *

Year of construction: 2011, condition: used, functionality: fully functional, ALEXANDERWERK ROLLER COMPACTOR, MODEL WP 200 Machine for compaction of the raw material is exclusively effected by the press rollers under hydraulic pressure. Specifically for use in the production area. Built in 2011. CHARACTERISTICS - Roller diameter: 200 mm - Roller width: 75 mm - Control system: external control cabinet (two cells) - Equipped with Combi-Vent-Feeder (CVF), consisting of the CVF Stirrer and the CVF Feed Screw, for optimized de-aeration of the raw material and allows for an automatic blending of undersize material (if any) with raw product PRODUCTION - Output: up to 500 kg/h (lactose) - Maximum roller gap: 5 mm - Maximum roller speed: 38 U/min - Maximum pressing force: 20 kN/cm SIZE Hnjdoycw Uvopfx Ai Nsk - Height: 2,010 mm - Width: 1,245 mm - Depth: 1,700 mm - Weight: 2,450 kg - Weight without switch cabinet: 2,050 kg - Switch cabinet weight: 400 kg - Height of switch cabinet: 2,100 mm - Width of switch cabinet: 800 mm - Depth of switch cabinet: 600 mm

Condition: used, Year of construction: 2011, functionality: not functional, total height: 2,500 mm, total length: 12,000 mm, total width: 4 mm, power: 65 kW (88.38 HP), overall weight: 10,305 kg, bar diameter (max.): 110 mm, pipe diameter (max.): 110 mm, turning length: 350 mm, workpiece diameter (max.): 110 mm, Equipment: documentation/manual, We are offering this used Sinico SIN-O-MATIC TOP 2000 cutting and end-finishing machine, year of manufacture 2011. Model: SIN-O-MATIC TOP 2000 Type: TR110/2-350-CL-S CNC Serial number: 1459 Hedpfx Aijycr Nhj Nsnk Year of manufacture: 10/2011 Weight: 7,200 kg (plus magazine) Workpiece diameter: 110 mm Maximum workpiece length: 350 mm Installed power: 65 kW max CNC control by NUM Automatic machine for cutting to length and end-finishing. Transfer machine with horizontal axis table for cutting and end-processing of tubes and bars. Flexible and highly adaptable CNC machine. It ensures high productivity, up to 2,500 parts/hour, and is designed for processing small to large workpieces: bar diameters up to 110 mm, finished part lengths up to 350 mm. Maximum versatility for machining tubes and bars. The machine is capable of performing the following operations: Chamfering – Face milling – Thread cutting – Forming – Marking Various spare parts, clamping jaws, and accessories are included. The machine is still assembled but has a fault, which is why it cannot be shown under power. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: good (used), approx. 15 Corlettes, Cordes, width 2m, not stackable - used - : Prices per item from location: €109 (net)! Manufacturer: Cordes Type: Corlette sp-200.525 Year of construction: unknown Hjdpfxovnahrs Ai Njnk Dimensions: Width: approx. 2m Depth: approx. 1.10m 1.72 m height including wheels 1.56 m without wheels Not stackable Load capacity: 950kg Own weight: approx. 93kg With drawbar and coupling Color gray Condition: good Available: immediately Location: 51373 Leverkusen

Condition: new, Year of construction: 2026, The WP200 self-centring 3-jaw chuck is a professional accessory designed for use with welding positioners and welding rotators such as models PS310 and PS320. Its precise clamping mechanism allows quick, stable, and concentric fastening of pipes and cylindrical or hexagonal parts, significantly improving the efficiency and safety of circumferential welding. Main advantages of the WP200 chuck Self-centring 3-jaw mechanism – ensures even and stable clamping of workpieces regardless of their shape. Versatility – compatible with most welding rotators and welding positioners, including CORMAK PS310 and PS320. Clamping precision – perfect alignment of workpieces translates into better weld quality and smooth rotation. Durable construction – robust body made from high-strength materials resistant to heavy mechanical and thermal loads. Hnsdjycqnvepfx Ai Nek Compact size and easy installation – low weight and precisely positioned mounting holes ensure quick integration with welding equipment. Design and technology The WP200 chuck features three high-quality jaws designed to automatically centre the workpiece on the rotational axis. Its outer diameter of 200 mm and inner diameter of 80 mm allow clamping of workpieces up to 170 mm in diameter. The body is made of high-grade steel, providing excellent resistance to deformation during long-term use. Precision and efficiency The WP200 self-centring 3-jaw mechanism significantly reduces setup time for welding operations. The elimination of backlash and positioning errors directly improves the quality of circumferential welds. Stable clamping of workpieces also enhances operator safety during welding. Applications The WP200 chuck is designed for use with welding rotators, welding positioners, and welding manipulators in operations involving pipes, flanges, rings, and cylindrical components. It is ideal for welding workshops, manufacturing plants, and the steel construction industry. Technical parameters Max pipe diameter: 170 mm Outer diameter: 200 mm Inner diameter: 80 mm Mounting hole spacing: 85 mm Mounting hole diameter: 9 mm For welding positioner: PS310, PS320 Weight: 10 kg

Condition: used, Year of construction: 2006, with tiltable saw blade for mitre cuts from government authority used, top condition, low hours Manufacturer: J. Neu Model: Piccolo EP 200 Year of manufacture: 2006 Hjdpfxeyb S Hqo Ai Nenk CE type-tested Motor: 5.5 kW Cutting height approx. 200 mm Cutting width approx. 550 mm Blade diameter approx. 600 x 30 mm Tiltable: left 60° – right 45° Height adjustable from the front via handwheel Extraction connection D 100 mm Required space approx. 1200 mm x 1700 mm x 1700 mm Original price approx. €15,000.00 Location: 97447 Gerolzhofen, loaded free of charge, unpacked Delivery in as-inspected condition No warranty or guarantee

Condition: new, Year of construction: 2026, pressing force: 200 t, stroke length: 60 mm, table width: 400 mm, table length: 4,200 mm, stroke adjustment: 60 mm, warranty duration: 24 months, Equipment: safety light barrier, These presses and feeding lines, engineered for the door and window accessories sector and offered with both single and double operation capability, guarantee long-term, high-efficiency performance. In the window accessories industry—where high-volume production is essential—our presses, combined with our expertise, ensure maximum customer satisfaction. - Pressing force up to 400 tons - Table length up to 6000 mm - 2- or 3-connecting rod options - Automatic, constant fine lubrication with continuous return - Progressive lubrication block use - Front and rear press access - Sliding covers with magnetic sensors - Induction-hardened and ground gears - Gear-hub connections with conical locking PRESS: 200 TON STROKES: 40-70 RPM STROKE LENGTH: 60 MM MAXIMUM DIE HEIGHT: 340MM TABLE-RAM HEIGHT: 400MM ADJUSTMENT RANGE: 100MM TOP TABLE DIMENSIONS: 400X3000MM BOTTOM TABLE DIMENSIONS: 400X4200MM MOTOR: 18.5 KW MOTOR SPEED: 3000 RPM Hnedpfjxrbmyjx Ai Nsk

Condition: good (used), -Stainless steel, work table Hodpfeb A I Ndex Ai Nenk -Design: stable -filing -double-sided table -Dimensions 2000/1800/H810 mm -Weight: 117 kg

Condition: good (used), -Stainless steel, work table -Design: stable -filing -double-sided table Hnedjb A I Ncspfx Ai Njk -Dimensions: 2000/1800/H800 mm -Weight: 100 kg

Condition: good (used), -Stainless steel work table -Design: stable -Base floor: 1 Hedpfsb A I N Esx Ai Nenk -border -filing -Dimensions: 2000/930/H930 mm -Weight: 82 kg

Condition: good (used), -Stainless steel work table -Design: stable -filing -double-sided table Hsdpeb A I N Isfx Ai Nenk -Dimensions: 2000/1800/H800 mm -Weight: 120 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 11,148 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, table length: 2,500 mm, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 620 mm Z-axis travel: 520 mm Number of axes: 3 Hjdex Hzn Aepfx Ai Njnk Table length: 2,500 mm Table width: 600 mm Tool holder: SK40 Main spindle power: 20 kW Max. spindle speed: 12,000 rpm Tool magazine: 30 MACHINE DETAILS Dimensions (L x W x H): 5,000 x 2,500 x 3,000 mm Net weight: 10,500 kg Power: 20 kW Operating hours: 11,148 h EQUIPMENT - Tool magazine - Chip conveyor - External cooling - without machine vices.

Condition: used, Technical details: floor-plate length: 2003 mm plate width: 1005 mm plate height: 180 mm Hjdpfx Aiewnfu Ns Nsnk transport dimensions LxWxH: 2,02 x 1,05 x0,18 m 3 pcs availabe (price per piece) Cast steel Table surface 2020mm x 995 mm Longitudinal groove: Number 4 Size: a=38, h=60, b=59, c=24 mm Center-to-center distance 250 mm Fixing hole: Number 4 Size D=30mm *

Condition: good (used), Hydraulic pump, oil pump, gear pump -Recording wave: Hnjdpfsb A Sizex Ai Nok -Dimensions: 180/160/120 mm -Weight: 4.5 kg

Condition: good (used), Hydraulic pump, oil pump, gear pump -Recording wave: Price: per piece Hedpjb A Siyefx Ai Nonk Quantity: 2 available -Dimensions: 170/120/110 mm -Weight: 4.3 kg

Condition: used, Year of construction: 2005, overall weight: 1,155 kg, load capacity: 200 kg, arm reach: 2,400 mm, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding Hnedpfx Aisv Tmqqs Nsk - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending - And many other projects Brand: KUKA Model: KR200 Comp Year: 2005 Control Cabin: KRC2 2001 Rated Payload: 200kg Access Distance: 2400mm Contents: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant + Electrical Panels Shipping: NOT included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: excellent (used), Year of construction: 2007, load capacity: 200 kg, arm reach: 2,400 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR200 KRC2 ED05 Condition: USED Hnodpfew Idi Dsx Ai Nsk Year: 2007 Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabinet + All Wire Sets + Teach Pendant Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs. (Source: KUKA's Website)

Year of construction: 2025, condition: new, 18 kW e-heater for 1000 pices 1 liter bottles used for pasteurization of cold filled bottles, jars,... Hsdpfxj Hmwks Ai Nsnk automatic temperature control 400V 50Hz 32A 18kW mounted on moveable frame

Year of construction: 1992, condition: good (used), Control system conversion 2022 to CYBELEC VisiTouch Pac pressure 200 t folding length 3050 mm column width 2550 mm Control system CYBELEC VisiTouch Pac ram stroke 524 mm Machine weight approx. 17.000 kg Equipment: - Control system conversion 2023 to CYBELEC VisiTouch Pac - controlled axes: Y1, Y2, X, R, crowning - hydraulic punch clamping - hydraulic die clamping Hnjdpfx Aijim R N Hj Njk - 4-stage pneumatic die displacement

Condition: used, This listing is for the PIPETMAN L P200L 20-200uL Colour Coded Yellow The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Hjdpjxv Dq Aofx Ai Nonk Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Condition: used, This listing is for 1 of 6 Capricorn CEP2000 Centrifuge Hodpfsxzg Alsx Ai Nsnk Capricorn Labs manufacture the CEP 2000 Bench Top Centrifuges and offers full maintenance and servicing support for their CEP Series of Bench Top Centrifuges have been designed specifically for use in clinical trials and are well established as reliable machines, which require very little maintenance. They have been developed to give high performance in a compact unit with simple, easy to use controls.

Condition: used, Year of construction: 2009, THIMON Automatic Pallet Hooder LIGNE CPHP 2000 Manufacturer Thimon – Savoie Hexapole, Rue Louis Armand, BP 69, 73420 Méry, France Type Industrial automatic pallet hooder (film hood application with roll unwind) Industrial Applications Hsdsx N Utqopfx Ai Nenk Automatic hooding of pallet loads at end-of-line to stabilize, protect, and secure pallets before shipping. Used on production and logistics lines in food, beverage, chemicals, cosmetics, and FMCG industries. Main Technical Specifications - Type: LIGNE CPHP 2000 - Year of manufacture: 2009 - Registration / ID: 507304 - Compliance: CE Machine Usage The LIGNE CPHP 2000 automates the application of a film hood over a full pallet load. The pallet is conveyed into the hooding area, the hood is formed and applied around the load to ensure pallet stability, protection against dust and moisture, and consistent handling and transport performance. Features / Differentiators - Large-format film roll unwind system suited for industrial throughput and high-volume pallet loads - End-of-line integration with pallet conveying and guarded safety area - Clear traceability for service and spare parts through ID 507304 and type LIGNE CPHP 2000