Vertical machining center

Hedelius C 60 P-2000

Condition: used, Year of construction: 2008, x-travel 2000 mm y-travel 620 mm z-travel 520 mm tool taper 2500 x 600 mm control 2000 kg tool magazin: SK40 rapid traverse HEIDENHAIN table-size 30 - 8000 U/min feed 45 m/min total power requirement 45 m/min workpiece weight max. 20 kW diameter of tools max. 10500 kg tool length - max. 5400 x 3300 x 3000 mm Equipment: - Heidenhain iTNC 530 control system - Tool magazine with 30 spaces - Chip conveyor - Screen filter system with IKZ - Operating instructions Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160) Rsdpfxoulnbko Adajn

Condition: excellent (used), Year of construction: 1995, Straight cut: Round 530 mm Flat 1100 x 530 mm Miter Left and Right 45° Round 530 mm Flat W X H 700 x 500 mm Miter Right 30° Round 400 mm Rsdeu R Rzrepfx Adaon Flat W x H 450 x 400 mm

Condition: good (used), Linde Cryoflex CTFA4-60 Cryogenic Freezer Serial: 3002097/2 Rjdpfxowbnvce Adajn 2011, This continuous conveyor belt in a sub-zero tunnel was developed specifically for operators keen to avoid unnecessary handling and transportation of parts requiring sub-zero treatment. The CRYOFLEX® T freezer can be easily integrated into continuous hardening lines. It is well suited to mass production of small or thin parts such as injectors, springs, nuts and bolts. The standard temperature range extends from room temperature to -110°C (-166°F), Stainless mesh belt dimensions 4000mm x 600mm, 3Ph

Condition: excellent (used), TIRA Type: TCC 7120 Temperature range: -75°C / +180°C Air-cooled condenser Temperature stability (over time and in the center of the usable space) ±0.1°C ... ±0.3 °C Maximum temperature change rate Heating: 4°C/min Cooling: 3°C/min Humidity range: 10% to 98% relative humidity Humidity stability over time ±1% ÷ ±3% Dew point range for long-term tests +2 / +94 °C Dew point range for short-term tests -20 / +2 °C External dimensions (L x D x H) 1320 x 2235 x 2137 mm Test space dimensions (L x D x H) 1000 x 1130 x 1020 mm Test chamber volume: approx. 1152 liters Max. load per grid: 50 kg Rjdpfx Adjwfddwjaen Maximum floor load of the test chamber: 100 kg Refrigerants: R404A and R23 Power supply: 400V + 6%/-10% / 50Hz / 3P+N+PE Rated power: 10.2 max. 17.5 kW Rated current: 19.5 max. 32.0 A Noise level: approx. 80 dB(A) Weight: 1180 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2007, functionality: fully functional, Small panel saw Behringer LPS 60 T, year 2007, available from early 2026. Rodpsx H Rulsfx Adaen

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 142333097, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, rotational speed (max.): 6,000 rpm, table load: 2,000 kg, TECHNICAL DETAILS Travel X-axis: 1,600 mm Travel Y-axis: 800 mm Travel Z-axis: 710 mm Max. spindle speed: 6,000 rpm Table dimensions (L x W): 1,800 x 800 mm Table load capacity: 2,000 kg Rsdox Ap S Eepfx Adajn Spindle taper: ISO 50 MACHINE DETAILS Machine dimensions: 2.73 x 4.31 x 3.03 m Length with chip conveyor: 4.31 + 1.03 m Depth with control system: 2.73 + 0.40 m Depth with coolant tank: 2.73 + 1.80 m Control unit: Heidenhain iTNC 530 Note: The machine can still be inspected under power until week 50.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, workpiece weight (max.): 3,500 kg, spindle speed (max.): 7,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working Area X-axis travel: 2,500 mm Y-axis travel: 1,000 mm Z-axis travel: 770 mm Distance spindle nose: 890 mm Number of machining axes: 3 Table Clamping surface left-right: 3,220 mm Clamping surface front-back: 1,000 mm Workpiece weight: max. 3,500 kg Spindle / Head Speed range: up to 7,000 rpm Drive power: 40 kW Tool Magazine Number of tool positions: 50 Workpiece Automation Storage type: magazine Control Control type: CNC Control model: Heidenhain ITNC 530 MACHINE DETAILS Electrical connection data Connection voltage: 400 V Rodpfx Ajwztphjdasn Dimensions & Weight Required space left/right: 6,500 mm Required space front/back: 5,000 mm Overall height: 3,700 mm Total weight: approx. 22,000 kg EQUIPMENT Chip conveyor: yes High-pressure pump The magnetic plates are not included in the scope of delivery (can be purchased optionally for €15,000). Machine will be provided partially dismantled at shop floor level.