Used Tooling for sale (36,838)

Year of construction: 1994, condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 75 x 75 x 3100 mm MACH-ID 4131 Bedpjzc Iztjfx Aa Uowp Type: Multi V Lower tooling 75 x 75 x 3100 mm Year: 1994 Total length:3100mm Total hight:75mm Length: 3100mm Width: 75mm Height: 75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Sheetmetalworking tooling Bsdpfxszc Izgs Aa Ujwp Multi V Lower tooling 140 x 140 x 6000 mm Total length:6000mm Total hight:140 x 140mm V-size: 8 - 10 - 16 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, For sale are the Multivac forming and closing tools shown in the pictures. Bodpswth Uiofx Aa Uswp There are 2 sets. Each for a foil width of 420mm. Multivac 19.200.1240.95 6x11cmx18cm tray size. Price: 2000 eur the other is 9x11.5cmx11cm item number 105793236, price 2000 eur.

Condition: excellent (used), Year of construction: 2003, Tool holder, vertical + horizontal SK 40 Table size, L x W 710 x 315 mm Speed range, vertical spindle 63 – 2500 rpm Speed range, horizontal spindle 45 – 1800 rpm Travel ranges: X-axis, longitudinal adjustment, automatic / manual 400 / 420 mm Y-axis, transverse adjustment, automatic / manual 220 / 228 mm + cross slide 375 mm Z-axis, vertical adjustment, automatic / manual 350 / 380 mm Adjustment of the quill, vertical, manual 80 mm Machine dimensions, approx. 1550 x 1620 x 1850 mm Machine weight, approx. 1300 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Bwsdpfx Aoziutzea Uop

Condition: used, Year of construction: 1997, Year: 1997 Table: 1780 x 415mm Spindle Speed 30 – 2066 RPM FIDIA Control Power Draw Bar Bedpfswtd Dysx Aa Uowp LOVO Light Coolant

Condition: used, Year of construction: 1985, x-travel 710 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 155 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min Bedozip Hiopfx Aa Uowp rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,3 t dimensions of machine L x W x H 2,20 x 2,30 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant

Condition: used, various tool changing consoles / die loading arms available: 070022 GUETHLE-SWT CT 16/1600 (16 t / 1600 mm) with support leg (2x) 180006 GUETHLE-SWT CT 6/2700 (6 t / 2700 mm) with support leg (2x) 210008 GUETHLE-SWT CK t / 1000 mm) (2x) 210009 GUETHLE-SWT CK t / 1000 mm) (2x) 180010 unknown (2 t / 1500 mm) with support leg (2x) 190002 GUETHLE-SWT CT t / 1000 mm) with support leg (2x) Bwjdsxddqfopfx Aa Usp 220019 GUETHLE-SWT CT 2/1000 (2 t / 1000 mm) with support leg (2x) 180002 GUETHLE-SWT CK 2/800 (2 t / 800 mm) (2x) 090054 GUETHLE-SWT CS 2/800 (2 t / 800 mm) swivelling (2x) 180003 GUETHLE-SWT CK 1/800 (1 t / 800 mm) (2x) 230001 Hydrap (1 t / 800 mm) (2x)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min Bodjzikraspfx Aa Uswp spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm Bwedpjziknzsfx Aa Uop tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: good (used), Year of construction: 2010, functionality: fully functional, 5-axis CNC tool grinding machine, Anca RX7 - Year of manufacture: 2010 - Software: ToolRoom RN32 - Spindle speed: 10,000 rpm - Double disc changer, capacity up to 8 discs - PLX tool loader Bwjdpfx Aaszh Nuws Usp

Condition: used, 2 x radial tool holders VDI 40, each: 400 Euro net. 2 x axial tool holder VDI 40, each: 250 Euro net. Bedpfx Aotz U Iioa Ujwp

Condition: good (used), Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder, tool holder -Quick-change tool holder: Quick-change turning tool holder -Recording dimensions: see photos -Tool holder: for grooving/slotting steel -Dimensions: 140/60/H125 mm Bwjdpezhuwwsfx Aa Uop -Weight: 1.9 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, CNC machining center Walter Helitronic Power - Year of manufacture: 2005 - Control system: HMC600 i7 panel with Tool Studio 3.0 Bodpfx Aezht Dvoa Uewp - Cylindrical loader - Grinding spindle motor power: 11.5 kW

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Rollomatic 660XW, year of manufacture 2024, 6-axis CNC tool grinding machine: Control system: FANUC 30iMB Grinding wheel changer: 6-position Bwedpfx Aaezhtrge Uep Tool diameter: Ø 0.1 – 12.7 mm 4 linear axes + 2 rotary axes Grinding spindle (max.): 14 kW Spindle speed: 500 – 12,000 rpm Machine dimensions: 1840 × 1560 × 2250 mm Machine weight: approx. 2,500 kg

Condition: good (used), Top slide, top slide, dovetail guide, tool slide, cross table, support slide, support beam, tool clamp, tool holder, tool mount, centering clamp -Tool clamp: Centering clamp, tool holder -Hole: Ø 58 mm -Dimensions: see photos Bodpfjzhl Dbox Aa Ujwp -Dimensions: Ø 125 x 125 mm -Weight: 5.7 kg

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Bwjdpezhlgcefx Aa Ujp Subject to prior sale

Condition: good (used), Year of construction: 2004, total height: 500 mm, overall weight: 500 kg, total width: 800 mm, rotary table diameter: 180 mm, table load: 200 kg, Metal cutting Tooling Nikken - CNC180 MACH-ID 9663 Make: Nikken Type: CNC180 Control: ULTIMAX Year: 2004 Table Ø: 180mm Bodpszhlb Hefx Aa Ujwp Table load:200 Length: 1200mm Width: 800mm Height: 500mm Weight: 500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1986, machine/vehicle number: 815, total height: 1,900 mm, total length: 1,400 mm, total width: 900 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 2,000 rpm, overall weight: 600 kg, table length: 500 mm, table width: 200 mm, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS: - Serial number: 815 - Operating voltage: 380 V - Frequency: 50–60 Hz - Rated current: 14 A - Table dimensions: 500 x 200 mm WORKING RANGE & CAPACITY: - Universal dividing head center height: 170 mm - Tailstock center height: 120 mm (with intermediate support: 170 mm) - Max. workpiece length between centers: 336 mm - Workpiece diameter with unsupported mounting: approx. 600 mm - Max. center length: 950 mm - Internal taper of indexing spindle: Morse 4 / Unified 40 - T-slots: 12 mm (machine base), 8 mm (additional elements) TRAVEL & ADJUSTMENTS: - Sharpening stroke: 190 mm - Cross travel of tool holder: 100 mm - Vertical movement of grinding head: 325 mm - Tool holder: 230 mm Bwedpfowxrfpox Aa Uep - Indexing device on tool slide: 330 mm ROTATION / SWIVEL RANGES: - Grinding head mounting / tool holder / grinding head / universal headstock: 360° DRIVE & SPEEDS: - Three-phase motor: 0.7 / 0.85 kW - DC motor: 1.3 kW - Spindle speed: 4000 / 8000 rpm (dual speed) - Stepless DC: 2000 – 10000 rpm ACCESSORIES: - Includes two-axis digital readout - Extensive accessories set suitable for the machine

Condition: good (used), Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 9 pieces -Tool angle: 35° -Dimensions: see drawing in the photos -Dimension: 26 x 120 mm -Total length: 835 mm / 1x 400/170/100/50/40/30/20/15/10 mm each Bwjdpfx Aord Adfea Usp -Total weight: 11 kg

Condition: good (used), Tool holder, milling holder, milling tool, adapter, intermediate sleeve, tool presetting device -Milling tool holders: Adapter for tool presetting device, 7 pieces -Types: HSK 63 HSK 100 SK 40/50 ANSI/CAT see photos Bodpfx Aopix Nksa Uewp -Submission/Price: complete -Overall dimensions: 500/300/H170 mm -Weight: 34.4 kg

Condition: good (used), Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling tool holders: SK40 16 pieces Bwjdpfxezhkq To Aa Ujp -Type: various designs, see photos -Price/Fee: complete -Transport dimensions: 400/300/H150 mm -Total weight: 37.7 kg

Year of construction: 2015, condition: used, Exhibit Bwjdpfx Aaev Dat Tj Ujp Storage location: Sonnefeld

Condition: good (used), Year of construction: 1975, Deckel FP2 FPS retrofitted tool milling machine with a 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. It features a fixed table, electrically interlocked milling head guard, and an SK 40 spindle mount. Accessories include various collets and milling arbors. It is in good, operational condition. A demonstration under power can be arranged. Bwodpfx Aozac Sbea Uop

Condition: good (used), HSK Tools for CNC Milling Machines + Marquardt Shrinking Device – Assortment Various tools with HSK interface from industrial use are for sale, suitable for CNC milling machines. 🔹 Scope of the offer: Extensive assortment of tools with HSK interface, including: - Drills - Milling tools - Measuring probes / touch probes Tools predominantly from well-known manufacturers, including Kennametal. Large quantity – ideal for manufacturing companies, workshops, or resellers. Condition and scope as shown in the photos. 🔹 Also included in the offer: Shrinking device – Marquardt Spanntechnik - Manufacturer: Marquardt Spanntechnik - Device Type No.: 32257-M437 - Type: 047.032.0.0.0 - Electrical connection: 400 V / 50–60 Hz - Maximum fuse: 16 A ➡️ The shrinking device is fully functional and can be purchased separately or together with the tool set. 🔹 Optional: Bwedpfxjynhxco Aa Ujp Storage cabinet with inserts for organized storage of a large number of tools – also available for purchase (see photos). 📦 Sale: Preferably as a complete lot. Individual sale possible upon request. Sold as shown; please refer to the photos for details.

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Bwodpfx Aaex Emfks Uep Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread