Used P200 for sale (162)

Condition: excellent (used), THERMAL TRANSFER PRINTING SYSTEM WITH PUNCH (printing, laminating, punching) Equipment / Additional information: Car inspection stickers were last produced Dodpfx Aiovf Ig Djiekw

Condition: good (used), functionality: fully functional, Year of construction: 1992, Pressure: 200 t Bending length: 3050 mm Distance between uprights: 2550 mm Ram stroke: 274 mm Control: Cybelec ModEva Pac Approx. machine weight: 17,000 kg Dsdoxb Sugjpfx Aiiskw Accessories/Equipment: - Control conversion to Cybelec ModEva Pac - 2 bending aids in front of the machine - Fiessler light curtain in front of the machine - Foot switch

Year of construction: 1991, condition: ready for operation (used), A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible. Dkedow A R Spepfx Aiisw

Condition: used, overall weight: 575 kg, volume flow: 550 m³/h, power: 75 kW (101.97 HP), We offer for sale Grundfos pump Type TP 200-510/4 A-F-A-DBUE. The pump is used, in very good condition. Djdpfx Aewqnfveiiskw

Year of construction: 1992, condition: ready for operation (used), Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools. Dkedpfji Dx Sbsx Aiiew

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm throat 300 mm stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers Dkodpst I D U Eofx Aiiew - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions

Condition: used, Diosna SP 200 spiral mixer 200 kg dough suitable for all types of dough, thanks to the gentle kneading mobile with permanently installed bowl short kneading time due to large kneading area easy to use smooth surfaces, easy to clean large power reserves, convincing quality assurance Dkedpfx Aijrxzbmoisw capacity in flour 125kg bowl contents 300 liter

Condition: used, Demonstration machine Hans Schreiner - metal lathe, 3-jaw chuck 315mm, 4-jaw faceplate 320mm, clamping disc 430mm, drive plate 250mm, steady rest, ride-on rest, magnetic brake, switchable automatically and with foot operation, coolant system, halogen lamp, splash guard, chip tray can be pulled out to the front, fixed punch, roller punch MK5 removable bed, hardened and ground bed and gear wheels without oil filling Dksdpsvrvvaofx Aiiew incl. Multifix Set B and 3-axis digital display Technical data: Centre height 300 mm Centre width 2000 mm max. turning diameter 600 mm spindle mount Camlock 8 hollow spindle 80 mm tailstock taper MK5 spindle speed 24 to 1600 rpm Speeds 15 Main motor output 7.5 kW Max. diameter over cross slide 350 mm Max. turning diameter in the bridge 680 mm Longitudinal feed 0.07 - 4 mm/revolution Cross feed 0.02 - 1.35 mm/revolution Metric thread 0.5 - 28 mm pitch Inch thread 56 - 1 threads/inch Module thread module 0.5 - 3.5 Thread diametric pitch 56 - 8 Quill diameter/travel 65/120 mm Weight 2200 kg

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 0-250-17-2346, functionality: fully functional, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 300 mm, number of axes: 4, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 4,300 mm Travel range, Y-axis: 2,250 mm Travel range, Z-axis: approx. 300 mm Main spindle Power: 10 kW Tool interface: HSK-F63 Spindle speed, max.: 24,000 rpm Axis configuration Controlled CNC axes: 4 Interpolating C-axis Servo-controlled Z-axis Tool changer Number of positions: 14 Tool holder: HSK-F63 Drilling unit Number of drilling spindles: 12, vertical Integrated groove saw Vacuum system Vacuum pumps: 3 x Becker MM1322 AV Total air flow: approx. 300 m³/h MACHINE DETAILS CNC control Version: WoodWOP 6 Beckhoff Industrial PC Beckhoff TwinCAT CNC Dedpfx Aezld Iyjiiokw Bosch Rexroth IndraDrive Digital Servo Drives SERCOS Motion Control Supply voltage: 415 V Frequency: 50 Hz Phases: 3 Full-load current: 61 A Main fuse: 80 A Control voltage: 24 VDC EQUIPMENT Matrix vacuum table 10 vacuum zones Heavy-duty gantry construction Automatic central lubrication system Twin extraction hoods with automatic positioning

Condition: refurbished (used), Diosna SP 200 AF spiral mixer with 2 bowls 200 kg dough Dsdpfx Aiew Rdmzeijkw temperature measerument digital control panel suitable for all types of dough, thanks to the gentle kneading capacity in flour 125kg bowl contents 300 liter tool drive 11/18.5 KW bowl drive 0.66/1.3 KW hydraulic drive 1.1 KW

Condition: used, mileage: 93,000 km, power: 177 kW (240.65 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space length: 7,370 mm, loading space width: 2,480 mm, loading space height: 2,370 mm, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, spoiler, tail-lift, traction control, Year of manufacture: 2023 Year of construction: 2023 Front axle: Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Double wheels; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Empty weight: 9.249 kg Carrying capacity: 8.750 kg GVW: 17.998 kg Dkodpfx Aio Ahilcsijw Tail lift: Palfinger, tail lift, 2000 kg Price: On request = Additional options and accessories = - Air suspension - Aluminium fuel tank - Camera system - Heated driver's seat - Lane Assist - LED- lighting - Outside temperature display - Radio - Reversing camera - Roof spoiler - Side door

Condition: good (used), Year of construction: 1977, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 200 t, table width: 800 mm, table length: 1,100 mm, throat depth: 440 mm, distance table to ram: 400 mm, total length: 37,200 mm, total width: 24,000 mm, total height: 18,200 mm, overall weight: 12,600 kg, ram adjustment: 110 mm, ram stroke: 40-180 mm incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 1/min Dkodpfetu Hvwox Aiisw Distance table/ram - adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Condition: used, Diosna SP 200 AD spiral mixer with 2 bowls 200 kg dough suitable for all types of dough, thanks to the gentle kneading capacity in flour 125kg Dksdpfx Aioptpxpeisw bowl contents 300 liter tool drive 11/18.5 KW bowl drive 0.66/1.3 KW hydraulic drive 1.1 KW

Condition: excellent (used), DEMAG hub motor 36/20 K6P for electric hoist P1600 available with clutch and brake disc on request Type 36/20 K6P, motor in good, tested condition Dedpfjv Uai Ajx Aiiskw Motor/armature/rotor/runner, bearing shields, clutch, brake also available separately P2000 casing, cable drum, cable guide from large stock

Condition: used, Year of construction: 1971, pressure 200 t Dkodpet Hw Dwsfx Aiiew passage width NA mm stroke 180 mm table length 690 mm table width 530 mm distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration

Condition: ready for operation (used), Facing lathe DP 2000 Chuck diameter 2000 mm Length 4500 mm 2 tool posts included with the machine Dkodpfx Aijv Hx R Neijw Weight approx. 22 tons Video of the machine in operation available!

Year of construction: 1984, condition: refurbished (used), PRESSURE 200t TABLE UP/DOWN 1130x860mm STROKE 250mm DAYLIGHT 500mm Dodpfx Aijdzp Ezsiokw

Condition: used, machine/vehicle number: 005289, X axis working area: 7400 mm Y axis working area: 1550 mm Dsdswcyacspfx Aiiokw Working Table: Flat table Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 10 Total number of tool changer positions: 14

Condition: ready for operation (used), Lift for one floor. Dodjy U Na Njpfx Aiiekw

Condition: used, Diosna SP 200 AD spiral mixer with 2 bowls 200 kg dough Dsdoiwg R Topfx Aiiekw suitable for all types of dough, thanks to the gentle kneading capacity in flour 125kg bowl contents 300 liter tool drive 11/18.5 KW bowl drive 0.66/1.3 KW hydraulic drive 1.1 KW

Condition: used, Diosna SP 200 AD spiral mixer with 2 bowls 200 kg dough Dkodpfsiwg Rdox Aiiow suitable for all types of dough, thanks to the gentle kneading capacity in flour 125kg bowl contents 300 liter tool drive 11/18.5 KW bowl drive 0.66/1.3 KW hydraulic drive 1.1 KW

Condition: good (used), Year of construction: 2020, PLC control, digital output, digital output module, digital input, Base Unit Dsdpox Updhofx Aiiokw -Manufacturer: Siemens, Simatic ET 200SP Base Unit -Type: 6ES7 193-6BP20-0DA0 -Number: 20 modules available -Price: per piece -Dimensions: 140/20/H35 mm -Weight: 0.1 kg/pc

Condition: used, Year of construction: 1988, pressure 200 t throat 450 mm stroke 30 - 140 mm table surface area 1100 x 850 mm dayligth 500 mm Dkodpfxjvb I Ito Aiijw ram surface 800 x 600 mm ram adjustment 110 mm tool hole in ram Durchm. 65 x Tiefe 105 mm no. of strokes 45 Hub/min total power requirement 15 kW weight of the machine ca. 14,2 t dimensions of machine L x W x H 3,18 x 2,09 x 3,05 m

Condition: good (used), mileage: 57,691 km, power: 81 kW (110.13 HP), first registration: 04/2020, fuel type: electric, tire size: 185/65R15, axle configuration: 4x2, wheelbase: 2,730 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 2, total length: 4,600 mm, total width: 1,760 mm, total height: 1,850 mm, loading space length: 2,040 mm, loading space width: 1,500 mm, loading space height: 1,350 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Fabric - Partition = Notes = Configuration: 4x2, Payload: 767 kg, Unladen weight: 1473 kg, Gross vehicle weight: 2240 kg, Towing capacity, unbraked: 450 kg, Towing capacity, center axle, braked: 450 kg, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Rear window wiper, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: White, Maintenance manual, Rear view camera, Type of lighting: Halogen lamp, Air conditioning, Seat heating, Bluetooth, Engine power: 81 kW (109 hp), Fuel: Electric, Type of gearbox: Automatic, Power steering, ABS, ASR, Starter battery, Charging connector: Type 2, Range: Type 2, Body type: Standard, Side panels, Roof rack: None, Side doors: 1, Side windows: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, L1 NAP 200KM WLTP Sidebars Aico 1e Owner Camera Navi Full Service History!, Spare wheel, Tread depth of spare wheel: 7%, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: VFT-32-Z Axle Configuration Tire size: 185/65R15 Brakes: Disc brakes Suspension: Coil suspension Axle 1: Steered; Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Weights Unladen weight: 1,473 kg Payload: 767 kg GVW: 2,240 kg Functional Loading area height: 50 cm Maintenance APK (Technical Inspection): Valid until 04.2028 Dedpfx Aoz Nfbneiijkw Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Financial Information Leasing price: €210 per month (delivery van, 72 months); Ask for more information and conditions.

Condition: new, Year of construction: 2025, operating hours: 1 h, power: 200 kW (271.92 HP), pressure (max.): 13 bar, New variable screwcompressor ALMIG Variable XP 200 air cooled Controller: Aircontrol Premium Year 2025 Hours: 1 h new condition, available short.(4 weeks) Technical specifications: type: Variable XP 200 Possible operating pressures of the system: 5 to 13 bar Quantity delivered at 5 bar : 9.63 to 43.58 m³/min at 6 bar : 9.80 to 38.85  m³/min at 7 bar : 9.92 to 35.00 m³/min at 8 bar : 9.65 to 33.00 m³/min at 9 bar : 9.61 to 31.25 m³/min at 10 bar : 9.56 to 30.20 m³/min at 11 bar : 9.50 to 28.75 m³/min at 12 bar : 9.43 to 26.26 m³/min at 13 bar : 9.37 to 25.01 m³/min Installed power: 200 kW Protection class / Insulation class Drive motor: IP55 / ISO F Operating voltage / frequency: 400 V / 50 Hz Sound pressure level (DIN 45635 T13) : 78 dB (A) Compressed air connection: flange DN 100 Dimensions and weight Dkodozm Nu Ujpfx Aiiow Length : 3300 mm Width : 1860 mm Height : 1945 mm Weight : 4320 kg Visit our store. We´ve got a lot of compressors and dryers on stock.