Used Oven For Preheating for sale (4,174)

Year of construction: 2017, condition: ready for operation (used), Vötsch VAW 60/100 Heat Oven / Heating Cabinet / Furnace Internal dimensions: 600mm x 1000mm x 600mm (W x D x H) External dimensions: 1800mm x 1800mm x 2200mm (W x D x H) Rated temperature: 650 °C Year of manufacture: 2017 Nominal power: 20 kW You are welcome to arrange a viewing. We can organize cost-effective shipping for you upon request. Gtjdpfx Aowykz Sefkot You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offers. All listed company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are reserved.

Condition: used, Tempering oven ARTUR NOLZEN type TL30/30/50 Warm air oven, convection oven, heating cabinet Fabrication no. 14785 Year of construction 1996 Temperature range max. 750°C Internal dimensions 300 x 300 x 480 mm Inner width at center bar 260 mm Connected load 6 kW Mains connection 400 Volt, 50 Hz - Temperature control NOLZEN type TRO t - 96 4 - THEBEN time control, type TR 635 top - Heating time to 750° C in approx. 95 min. Space requirement L x W x H 1300 x 1100 x 1400 mm Gtjdpoq Ubqisfx Afkot Weight 310 kg good condition

Year of construction: 2015, condition: ready for operation (used), Heating surface: 3200x1480mm, 2x heating plate dimensions: 2120x1480/1060x1480mm, max. temperature: 180°C, connected load: 17.8kW, length: 3300mm, width: 1650mm, height: 1100mm, weight: 887kg. Elements: insulated lid, lid handle, quick-release clamps, industrial rollers with stoppers, electrical switch box/control panel, U-shaped support rails, signal light tower, POWER signal light, on/off timer switch, digital timer, temperature control unit left heating plate, temperature control unit right heating plate, on/off switch left heating plate, on/off switch right heating plate, RESET push button, EMERGENCY STOP switch, signal light circuit breaker (BREAKER), main switch. With documentation. An on-site inspection is possible. Gtedpfsw S Tx Ajx Afkot

Condition: ready for operation (used), Heraeus UT 6060 heating furnace no. 415 max. 300°C Dimensions: Outside: 750mm x 730mm x 580mm ( L x W x H ) Inside: 400mm x 350mm x 380mm ( L x W x H ) Godpfx Aolt Ut Rsfkstt For more technical data, see pictures. You are welcome to visit for inspection. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Deviations from technical data as well as errors in the description of the article can happen and remain reserved.

Condition: good (used), Haussler Stone Oven Model - INO 2000/4 230 volt power Heavy fire brick baking chamber 122°–608° F temperature range Excellent design Made in Germany Gedpfjvz Dv Tjx Afkett In excellent condition

Condition: excellent (used), Miwe Condo 60x80 Stone Floor oven with proofer for further information please send an email Gjdpfx Aekzhqmjfkjtt

Year of construction: 2002, condition: good (used), functionality: fully functional, Temperature max: 700° Celcius Opening LxH: 1.500 x 30 mm Country of origin: The Netherlands Electric power: 14 kW Machine LxWxH: 2.000 x 1.000 x 1.700 mm Godswi Ry Hspfx Afkett Machine weight: 1500 kg

Condition: excellent (used), J4 tunnel oven from year 2012, disassembled and ready for shipment. For more information, please send an email. Gsdow Elytjpfx Afkjtt

Condition: like new (used), Mondial Forni Stonefloor oven 120x150 year 2016 just used a few times Gsdewf Ix Sspfx Afkstt

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1213255, REF: MM6183 1 x Double D Food Engineering double rack industrial oven, including baking racks and chimney. Technical specification ⚙️ ✅ Manufacturer - Double D Food Engineering Ltd ✅ Burner model - n 2-4 ✅ Serial number -  1213255 ✅ Date of manufacture - 1992 ✅ Rating 500-000 Gjdsxb Alvspfx Afkstt General overview ℹ️ Designed for precision thermal processing, this oven delivers consistent and reliable results for a wide range of applications, including baking, roasting, drying, and cooking. This oven provides superior temperature control and uniform heat distribution, which is critical for product quality and safety. Key Features & Benefits 📋 ✅ Consistent Results: Ensures uniform cooking, baking, or drying for consistent product quality. ✅ High-Volume Capacity: Built to handle large production batches, significantly increasing efficiency and throughput. ✅ Precise Control: Offers accurate temperature and time control, allowing for fine-tuning of the cooking process. ✅ Hygienic Design: Constructed with materials and features that facilitate easy cleaning and meet food safety standards. ✅ Versatile Applications: Suitable for a broad spectrum of food products, from baked goods and snacks to meats and ready meals.

Condition: excellent (used), Thermo Scientific Heratherm Thermo Scientific Heratherm OMS180 Forced Air Drying Oven – 250 °C Product Description: Gtodpfx Afex Uxz Aekst For sale is a Thermo Scientific Heratherm OMS180 forced air drying oven. The unit comes from laboratory use and is in good used condition. Heating, forced air circulation, and controls are fully functional. Suitable for laboratory, industrial, educational, research, material and sample drying applications. Technical Specifications: Manufacturer: Thermo Scientific Model: Heratherm OMS180 Max. temperature: 250 °C Temperature control: Digital Interior: Stainless steel Forced air operation: Yes Power supply: 230 V / 50–60 Hz Power consumption: approx. 3.06 kW Protection rating: IP20 Weight & Dimensions: External dimensions (W × D × H): approx. 620 × 630 × 800 mm Internal volume: approx. 180 liters Weight: approx. 75 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See pictures) (Specifications and technical data are subject to change and errors!) If you have any further questions, feel free to contact us by phone.

Condition: excellent (used), Type: TSO600/96/4 TH Serial number: 10064051 Year of constructon: 2007 Model: right hand execution Belt width: 600 mm Belt length: 96 m Tiers: 2 x 4 pc Heating: thermal oil, 400 kW at 180°C Gsdpfxex Ttykj Afkott Steam: max 1500 kg/h Exhaust: Ø 252 mm, 1000 m³/h Compressed air: 6 - 8 Bar Cold water: 1 - 20°C, 3 m³/h Hot water: 20 - 60°C, 4 m³/h Power: 3 x 400V, 50Hz, 40kW Dimensions: 11040 x 4000 x 4975 mm Weight: 20000 kg With belt washer and CIP

Year of construction: 1992, condition: good (used), degree 220 total power requirement 50 kW Gjdpjx Ti Dxofx Afkett weight of the machine ca. 1500 kg dimensions of the machine ca. 2600 x 1600 x 1600 mm

Operating hours: 9,999 h, condition: good (used), functionality: fully functional, Used continuous belt brazing furnace Manufacturer: WMU System • System designation: y-WMU • Type of system: o Continuous belt furnace o Protective gas atmosphere H₂ / N₂ • System manufacturer: WMU GmbH Temperature data • Number of control zones: 4 • Max. temperature at part: 900 °C • Min. temperature at part: 880 °C Setpoint temperatures per zone: • Zone 1: 970 °C • Zone 2: 970 °C • Zone 3: 980 °C • Zone 4: 980 °C Process parameters • Belt speed: o 480 mm/min o corresponds to 530 mm/min at full belt load Gtjdpfxex Tb Rdo Afkjt • Gas flow rates: o Nitrogen (N₂): 20 m³/h o Hydrogen (H₂): 14 m³/h

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) Godpox S E Nuefx Afkott 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm

Year of construction: 2016, condition: excellent (used), Fully functional, in very good technical and optical condition. Year of manufacture : 2016-2017 The set contains: EUROMAT B5 / B10 VARIO oven + 2 loading spaces. Baking Sheets/Tray - Accessories. Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. Payment in cash, possible upon delivery on site. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. Gtsdjx Rcguepfx Afket We issue intra-community invoices - excluding VAT. opening hours Mon-Fri: 8 a.m.-4 p.m.

Year of construction: 2009, condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode dryer, welding powder dryer, welding electrode stabilizing oven -Manufacturer: Gullco, Drying oven electrode dryer welding powder dryer type 125-220 -Nominal temperature: up to 38° - 288°C -Usable space: WDH 250/480/200 mm -Voltage: 220 V Gtsdpfx Aox Sw N Hofkjt -Power: 1000 W -Dimensions: 385/365/H695 mm -Weight: 24.4 kg

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 Gtedpjfz I Rxjfx Afket 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Year of construction: 2015, Working condition reflow oven. Gtodsx Tq I Sepfx Afket Ask for additional information!

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 Gtodpfx Aefz Nd Ijfkjt 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ Gtsdjfx Nfmjpfx Afkjt 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 Gtjdpfsfzb Niex Afkst ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Gtjdpfx Ajfz U Nbefket Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 Gtsdpfxsfzccns Afkot ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Gtsdpfsfzb Rcjx Afkot Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡