Beverage processing machine

Canning line for beer 10000 cph

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Gsdpfx Aow Uf Ihebgsbn Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: used, Year of construction: 2019, Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt Gbjdpel Hxniefx Abgsn

Condition: ready for operation (used), Diameter range: 50 mm - 108 mm Height range: 38 mm - 197 mm Production capacity: up to 500 c.p.m. No. of heads: 6 Gedpfxetqmrys Abgjbn

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine Gbedpfx Aeh Nvyzebgon -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: ready for operation (used), CAP30 APPLICATOR 1000 HELICAP23: YOM 2016 VERSION 300v 15.600 RUNNING HOURS Godpfxsw Nqn Ns Abgobn PRICE 150.000 EUR FCA POLAND THE MACHINE WAS IN PRODUCTION TILL SEPTEMBER 20. EXCELLENT CONDITION EXCELLENT CONDITION, READY FOR SHIPPING

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw Gbedpfomb U Tusx Abgon • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Gbodpst Ul Exofx Abgjn

Year of construction: 1997, condition: ready for operation (used), machine/vehicle number: 41110, Nominal pressure: 110 bar with existing delivery volume: 6 l/min max. supply pressure: 12 bar Gbedpfx Abed D U T Rjgsn electrical connection: 230 V, 1,5

Condition: excellent (used), functionality: fully functional, total height: 2,175 mm, total length: 13,670 mm, total width: 2,050 mm, The CES CO2 cryogenic tunnel is a high-performance solution for rapid product freezing in industrial environments. Thanks to its use of carbon dioxide, this tunnel provides rapid, efficient cooling, ensuring that food quality and properties are preserved. In fact, it is designed to guarantee uniform freezing while reducing moisture loss. What's more, the CO2 CES cryogenic tunnel stands out for its ability to handle large volumes of product, making it an ideal choice for large-scale operations. What's more, it offers flexibility of use, adapting to a variety of product types while ensuring a continuous workflow. Thanks to its cutting-edge technology, it enhances productivity while reducing energy costs, optimizing freezing processes in the food industry. In short, this machine represents a reliable and efficient solution to the demands of industries requiring rapid freezing, while guaranteeing rigorous compliance with quality and safety standards. Technical specifications Cooling Dimensions: 13670 x 2050 x 2175 mm (L x W x H) Usable dimensions: 11960 x 1201 (L x W) Gbsdpfx Asu Iu U Dsbgjn

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, Equipment: type plate available, BENHIL 8380 Butter Packaging Machine (used) • Manufacturer: BENHIL • Model: 8380 • Machine type: Butter and margarine packaging machine • Condition: good • Overhauled in 2019 • Performance: up to 4,800 units/hour • Formats: 250 g and 125 g • Includes BENHIL 8538 carton packer • Excludes GIGANT carton sealer (gluing machine) • Proven BENHIL quality • Ideal for industrial butter processing For sale is a used BENHIL 8380 butter packaging machine in good condition. The machine underwent a comprehensive overhaul in 2019 (list of overhauled parts available upon request) and is in well-maintained condition, both technically and visually. The system achieves a performance of up to 4,800 packages per hour and is designed for butter formats of 250 g and 125 g. The BENHIL 8380 is known for its high process reliability, precise portioning, and reliable packaging quality – even in continuous operation. Thanks to its robust design, the machine is ideal for industrial use in dairies and butter processing facilities. It offers proven technology, simple operation, and a long service life. Further information, photos, and on-site inspection are available upon request. Gedsx R Dn Hjpfx Abgjbn