Used Operating Instructions for sale (29,378)

Condition: good (used), Year of construction: 2017, functionality: fully functional, Baler Presto CC 40 M, Year of manufacture: 2017 Lhsdpszk Anpofx Aftsi Technical Specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Binding: 4-fold, polyester strapping, manual Throughput rate at bulk density of: 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale size: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3,800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Operating instructions and CE declaration are available. Note: Channel discharge is fully automatic and regulated. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale is ex-works, prepayment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2007, max. wheel diameter 400 mm weight of the machine ca. 4 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : KLINGELNBERG Single- and double-flank rolling test machine with structure-borne sound testing model R 30 year 2007 _____ Workpiece outer diameter min. / max. 36 / 300 mm Center distance between workpiece and counter wheel 135 - 290 mm Spindle speeds max. 3.000 rpm Drive torque max. up to 2196 rpm 20 Nm Drive torque max. 2196 – 3.000 rpm 14,7 Nm Spindle drive 4,62 kW Total drive approx. 10 kW - 400 V - 50 Hz Total weight approx. 4.000 kg Lsdpfxjxvdrye Aftshi Accessories / Special Features: • The machine is a universal rolling tester designed for the following testing procedures: o Single-flank rolling test o Double-flank rolling test o Structure-borne noise testing in single and double-flank contact o Helix testing in double-flank contact • WINDOWS PC control for measurement data acquisition and analysis with the NoisyS32 testing software • SIEMENS control panel for operating the machine and evaluating the test cycles • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating instructions • Unfortunately, the license dongle for activating the measurement software is currently missing. We hope to receive it from the supplier of the machine. Condition : very good condition ! Almost unused ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection gear machines – CNC or conventional - available. Please let us know your requirements.

Condition: used, mileage: 203,897 km, power: 130 kW (176.75 HP), first registration: 07/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, loading space length: 4,300 mm, loading space width: 2,150 mm, loading space height: 2,300 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, INTERNAL VEHICLE NUMBER: M620----VW CRAFTER 2.0 TDI XXXL BOX VAN----KM: 203,897 WITH SERVICE BOOK VEHICLE HISTORY AVAILABLE IN DIGITAL FORMAT LAST INSPECTION WITH OIL CHANGE AT 203,696 KM ON 05/19/2026 Lhsdpjzmczzefx Aftji ALL INSPECTIONS WERE CARRIED OUT IN A MANUFACTURER-AUTHORIZED WORKSHOP VEHICLE HISTORY AVAILABLE IN DIGITAL FORMAT----1ST OWNER ----LIKE-NEW M+S TIRES----* HILL START ASSIST * BRAKE ASSIST * CROSSWIND ASSIST * AIR CONDITIONING * REARVIEW CAMERA * AUTOMATIC HEADLIGHT ADJUSTMENT * HIGH BEAM ASSIST * START/STOP ----2 SEATS----PAYLOAD: 1,060 KG UNLADEN WEIGHT: 2,440 KG TOTAL WEIGHT: 3,500 KG ----XXXL BOX BODY WITH RAMP FROM RAPID LEICHTBAU GmbH BOX DIMENSIONS: LENGTH: APPROX. 4.30 METERS WIDTH: APPROX. 2.15 METERS HEIGHT: APPROX. 2.30 METERS SIDE WALL WITH TIE-DOWN RAILS----WHEEL ARCH DIMENSIONS: LENGTH: APPROX. 1.15 METERS WIDTH: APPROX. 0.45 METERS HEIGHT: APPROX. 0.35 METERS----SPECIAL LOADING RAMP FOR LOADING ROLL-ON/ROLL-OFF UNITS----AIR SUSPENSION REAR FROM VB AIR SUSPENSION FITTING INSTRUCTIONS----* MULTIFUNCTION STEERING WHEEL * BLUETOOTH HANDS-FREE SYSTEM * APPLE CARPLAY * ANDROID AUTO * USB-C * AUX * SD CARD * ERGO COMFORT SUSPENSION SEAT * 2 X ARMREST * ELEC. WINDOW LIFTS * ELEC. DOOR MIRRORS+HEATED * CENTRAL LOCKING WITH REMOTE CONTROL * LED CARGO AREA LIGHTING SWITCHABLE * LUMBAR SUPPORT * ROOF SPOILER * LED CABIN LIGHTING * STORAGE COMPARTMENT IN THE CAB ----Special Equipment: * Audio system Composition Media (radio/CD player, MP3 playback function) * Equipment package: Light + Visibility * Exterior mirrors, electrically adjustable and heated * Suspension: Dampers and stabilizers reinforced front and rear * Vehicle without type designation * Steering wheel with multifunction * Marker lights, side * Smoker's package * Rear view camera * Mud flaps, front * Seats in cab: Suspension seat ErgoComfort * Driver's side (seat adjustment 20-way) Additional Equipment: * Airbag, driver side * Exterior mirror, convex, left * Exterior mirror, convex, right * Turn indicator LED integrated in exterior mirror * Floor covering in cab: Rubber * On-board tools * Cw-value underbody paneling * Double headlights * Dual-tone horn * Entry grab handle on rear pillar, left * Entry grab handle on rear pillar, right * Hill start assistant * Brake assistant (HBA) * Crosswind assistant * Window lifts, electric front * Windshield glass laminated * Remote control key (2), foldable * Grab handles, A-pillars * Interior lighting in cab: LED * Interior lighting in cargo/passenger compartment: LED * Fuel tank: 75 liters * Headlamp range adjustment * Truck registration * Engine 2.0 Ltr. - 130 kW TDI * Wheelbase 3640 mm * Tire repair kit * Low emission according to exhaust standard Euro 6 * SCR system (AdBlue technology) * Power steering, electro-mechanical * Seat cover / upholstery: Fabric * Seats in cab: Passenger seat adjustable * Start/stop system for engine * Sockets (12V connection) in cab (2 pieces) * Bumper front in gray with trim in vehicle color * Tie-down eyes, cargo area * Warning system for safety belt (driver side) * Heat-insulating glazing * Central locking with remote control and interior operation * Permissible total weight 3.50 t ----On request, we can retrofit the vehicle with a trailer hitch. Professional assembly – quick and reliable, starting from 599 €. +++ Exclusive promotion at Autohaus Mat GmbH: Up to 1,000 € trade-in bonus – your advantage for vehicle replacement! +++ Contact

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm Lhsdpjzkvx Uofx Aftoi cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear * Design: "Circuit-guided" - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: good (used), max. module 2 hobbing length 135 mm total power requirement 2,2 kW weight of the machine ca. 1420 kg dimensions of the machine ca. 2,00 x 1,60 x 1,43 m --> Technical specifications Maximum milling diameter: Ø 150 mm --> Maximum milling length: 135 mm --> Maximum module: 2 --> Spindle bore: Ø 24 mm Ljdpozkvuvsfx Aftohi --> Spindle mount: MK-4 --> Cutter speeds: 140–1120 rpm --> Automatic feed Equipment and accessories: Coolant system, cutters, change gears, operating instructions

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: 14202407, This is an electric rapid-cooking kettle from the premium manufacturer MKN, model Optima 850, nominal capacity 285 liters / usable filling volume 260 liters. After a thorough inspection, the unit is in flawless, good used condition. You will receive an invoice with VAT stated. Our used equipment service for you: * 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. * High-quality brand-name equipment at fair prices. * Professional overhaul / inspection & expert cleaning. * Checked & fully functional - or money back. Lhodszku Inopfx Aftei * Flexible choice of shipping or self-collection. * Competent advice - before and after purchase. * Provision of operating instructions, connection diagrams & spare parts. * Inspection according to DGUV V3. Technical data: * W x D x H: approx. 1400 x 850 x 920 mm * Inner kettle: 1020 x 540 mm, 535 mm deep, for 6 x GN 1/1 - 200 mm deep * Power connection: V: 400 / kW: 35.8 * Serial number: 14202407 * Nominal capacity: 285 liters * Usable filling volume: 260 liters * Year of manufacture: 2014 * Heat output: sensible: 1253 W, latent: 7160 W Condition: Used, major inspection performed, fully functional Further details: * Device switch * Power selection switch * Temperature regulator * Safety temperature monitor * Indicator lights * Tube heating element * Pilot heating element * Contactor * Water solenoid valve * Level controller with level electrode * Pressure regulator * Electrical connection * IPX 5 Shipping: * Delivery or self-collection by arrangement. * Worldwide shipping on request. * Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively according to our general terms and conditions (GTC).

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, ZwickRoell Z100 THW Allround Table Top Manufacturer: ZwickRoell GmbH & Co. KG Type: Z100 THW Model: 100 kN Allround Table Top Year of Construction: 2024 Machine Type: Electromechanical Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a like-new ZwickRoell Universal Testing Machine, Type Z100 THW Allround Table Top, manufactured in 2024. The machine is suitable for highly precise tensile, compression, bending, and material tests in research, development, quality assurance, laboratories, and industrial applications. The testing system is equipped with a 100 kN XforceK load cell, state-of-the-art measuring and control technology, and comprehensive documentation, including operating instructions, testing, and calibration documents. Technical Data: Manufacturer: ZwickRoell GmbH & Co. KG Type: Z100 THW Model: 100 kN Allround Table Top Article Number: 3023272 Works Number / Serial Number: 746182 Year of Construction: 2024 Testing Force: 100 kN Test space height (bottom): 1,285 mm Test space height (top): 1,400 mm (with additional cross member) Test space width: 1,040 mm Cross member speed: 0.0001 to 1,500 mm/min Return speed: max. 2,500 mm/min Control deviation: max. 0.05 % Stroke resolution: 0.484471 nm Positioning accuracy: ±2 µm Control cycle: 1,000 Hz Power connection: 400 V / 3-phase / N / PE Mains frequency: 50 / 60 Hz Current consumption: max. 9 A per phase Power consumption: approx. 6 kVA Protection class: IP32 Load Cell: Manufacturer: ZwickRoell Series: XforceK Serial Number: 832082 Nominal force: 100 kN Nominal sensitivity: 2 mV/V Dimensions: Load frame height: 1,769 mm Overall height with base frames: 1,884 to 2,694 mm Width: 1,360 mm Width with base frames: 1,536 mm Width including machine electronics: 1,729 mm Depth with base frames: 781 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 215 kg Base frames: approx. 34 kg System weight with typical components: approx. 315 kg Maximum total weight according to nameplate: 385 kg Equipment: Electromechanical two-column testing frame 100 kN XforceK load cell Electronic measuring and control technology Programmable test sequences Digital measurement data acquisition Mechanical holding brake Control panel with emergency stop Original ZwickRoell operating manual Testing and calibration protocols Measurement process capability studies (Cg/Cgk) Calibration markings present CE marking Accessories as shown in the pictures Condition: Lhodpfx Aozktr Ssftji Used Year of construction 2024. The machine is in very good condition. Testing, maintenance, and calibration documents are available. Optical condition as shown in the pictures. Scope of supply: ZwickRoell Z100 THW Universal Testing Machine 100 kN XforceK load cell Original operating manual Testing and calibration documents Documentation Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: E22SI16112554450, This is a combination steamer SCC WE 202, in electric version, from the premium manufacturer Rational, manufactured in 2016. The combination steamer is located in our in-house workshop and will undergo a thorough inspection, and will be sold with a 6-month warranty. These are sample photos of the same model series; actual photos will follow shortly. The combination steamer is expected to be available from week 30. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 standard This combination steamer offers space for 20 x 2/1 or 40 x 1/1 GN containers. In automatic mode, the appliance automatically recognizes the ideal cooking path, the size of the food, the quantity being loaded, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods and finishing). Technical data: W x D x H: approx. 1084 x 996 x 1782 mm Minimum dimensions of the door opening for transport W x H: 1145x1900mm Power connection: V: 400 / kW: 65.5 / Hz: 50/60 Weight: approx. 351 kg Serial number: E22SI16112554450 Year of manufacture: 11/2016 Condition: Used, inspected and fully functional. Further information: In combination steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C) and combination (30°C to 300°C) Core temperature sensor Integrated energy optimization Care Control - self-cleaning Handheld spray with automatic retraction 8.5-inch color display and touchscreen 5 fan speeds programmable Integrated, maintenance-free grease separation system Automatic start time preselection 7 cleaning levels for unattended cleaning - also overnight Moistening adjustable in 3 levels - from 30°C to 260°C 5 programmable fermentation levels USB interface Joint-free, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Lodpfx Aozkhwioftshi Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors.

Condition: new, This is a robustly built, stainless steel work table with a closed left side, 6 adjustable feet, a storage shelf, and an upstand of 50 mm. Due to its robust construction, it is also very suitable for food production facilities. The work table is new and unused, still with protective film. The stated price is the net price, less a 25% special discount, plus 19% VAT. Your offer price is €1007.78 net. Lhsdpfx Afoln Udpstoi OUR USED EQUIPMENT SERVICE FOR YOU: High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 seal TECHNICAL DATA: External dimensions WxDxH: 2700x850x900mm Upstand 50mm Left side closed One storage shelf Condition: New, unused SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to request advice, or would you like to view something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 – 13:00 and 14:00 – 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 33,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Highest fifth-wheel load on the market (20") Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis, fifth-wheel, container Fine-grained steel welded construction, fifth-wheel plate with interchangeable 2 kingpins and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot, flush with rear Lhjdpjzl Eh Usfx Aftji Center telescopic extension, 1st stage; rear extension extended, 1st stage: 2 x 20-foot or 1 x 40-foot with or without gooseneck tunnel Center telescopic section, 2nd stage; rear extension extended to 2nd stage: 1 x 45-foot with gooseneck tunnel and rear overhang Center telescopic section, 2nd stage; front extension extended to 1st stage Rear extension extended, 2nd stage 1 x 45-foot container with long gooseneck tunnel and beveled corners Center telescopic section as a telescoping central tube frame with bolt locking mechanism Without rear height adjustment and without foldable center supports; transport of containers without a tunnel is not possible. 2 container guides, including connection plate for electrical, air, and brake connections Plug-in adapter for front locking, for securing containers without a tunnel from below, with mounting bracket when not in use Front extension mounted on rollers, manually extendable (for 45-foot containers with long tunnels) Rear extension mounted on rollers, with hand crank 24 to. 2-speed support jack, single-side operation Extendable underrun protection for 45-foot containers Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, activated by 3 brake applications Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer’s choice Steel rims, factory silver Electrical System 24 volts, 4 x 3-chamber lights + 1 round backup light and + 1 round rear fog light, yellow LED lighting on the sides 2 white front position lights 2 white/red lane-departure warning lights at the rear 2 x 7-pin reverse-proof sockets at the front, without connecting cables Operating Instructions When transporting 45-foot containers with a short tunnel, with or without a front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total trailer length of 16,500 mm will be exceeded! The underrun protection must be extended manually! A special permit pursuant to § 70 StVZo is required! Registration / License Plates Germany Type approval pursuant to EC Directive 2007/46

Condition: used, Year of construction: 2000, functionality: fully functional, working width: 1,400 mm, Manual Sheet Laminating Machine, Gluing Machine Tünkers Forward 1450S This is a hand-operated machine where carrier and pressure sheets are processed manually. This well-maintained unit is suitable for a wide range of applications. For example, it can be used for laminating corrugated cardboard, corrugated board, cardboard, semi-cardboard, as well as films and fabrics. The maximum sheet size is 1400 x 1400 mm, the minimum sheet size is 200 x 280 mm. Carrier material weight approx. 250 g/m² up to approx. 8 mm thickness possible. The weight of the top material can range from approx. 80 g/m² to 800 g/m². Depending on material and size, up to 600 laminations per hour are achievable. Training and instruction on the machine and its operation can be provided if needed; we are happy to assist! Lhedpoy Svqpofx Aftji Currently, the machine is located in Viersen-Dülken. If you have any questions, please feel free to contact us.

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm Lhsdpfxszkbn Us Aftsi feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: ready for operation (used), Year of construction: 1969, x-travel 700 / 710 mm y-travel 275 mm z-travel 350 mm taper in main spindle ISA 40 table surface area 900 x 250 mm T-slots 3 x 18 x 60 Stk. turning speeds 32.0 - 2000 U/min feed stepless 15 - 750 mm/min voltage 400 V total power requirement 4.0 kW weight of the machine ca. 1400 kg range L-W-H 1000 x 1400 x 1800 mm from a training workshop (vocational school) Features: - Robust, electric-motor-driven universal milling machine - With horizontal and vertical main spindles * Vertical main spindle can be swiveled 360° in two planes - Sturdy T-slot clamping table with 18 mm T-slots - Electric feed control - Stepless speed adjustment Ljdpfszkbnzex Aftohi - Swiveling machine light - Control cabinet, installed on the right - Original operating instructions Machine data sheet

Condition: ready for operation (used), Year of construction: 2010, pressure 160 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 400 mm ram stroke speed 200 mm/sec work speed 10.0 mm/min return speed 165 mm/sec work stroke ca. 350 mm dayligth ca. 660 mm oil volume 450 ltr. table height 830 / 950 mm table width 75.0 / 60.0 mm voltage 400 Volt total power requirement 18.5 kW weight 13440 kg range L-W-H 5150 x 2050 x 3150 mm current new price approx. 90.000 euros special price on request ----- ULTIMA PLUS electro-hydraulic press brake with: * increased installation height .. approx. 660 mm * increased cylinder stroke .. approx. 350 mm ----- - in checked condition - machine video - ?v=chgCaXLnpa8 Equipment: - CNC electro-hydraulic die/press brake - CYBELEC CNC control "DNC 880 S" * swiveling control panel, front right * 2D graphic programming & product display * tool & program library - CNC controlled axes: Y1 + Y2 + X + R axis - CNC electro-motorized back stop, with ball screws (X axis) - CNC electro-motorized Height adjustment of the stop beam (R axis) - 2x manually adjustable back stop fingers (Z axis) - 2x front, movable support arms with T-slot ("Sliding System") - 1x set of bending/insert tools Lodoxaambepfx Aftjhi * AMADA / SYSTEM A tool system - Laser protection device in front of the machine - Safety device behind the machine (door) - 1x freely movable foot switch - original operating instructions

Year of construction: 2018, condition: excellent (used), functionality: fully functional, We are selling a used cooler that is still in very good condition. The fins are clean. Please refer to the data sheet for more information. If you are interested, I can send the documents, i.e., the drawing, the data sheet, and the installation instructions, by email. The feet are included and can be seen in the pictures on the cooler. The cooler has its own frequency converter in the small control box for control. New price: approx. €23,000.00, excluding installation. This device has the following features: * Frost-proof due to 34% ethylene glycol → ideal for year-round outdoor use. Ljdpfszly Ddox Aftjhi * Energy-efficient thanks to EC fans with 0–10 V control. * Low noise (good choice for installation in residential or mixed-use areas). * Robust (galvanized, powder-coated steel housing RAL 7035, copper pipes/aluminum fins). * Easy integration (loose flanges DN 50, repair switch, emergency operation signal, terminal box). Summary: The device is a classic industrial/commercial dry cooler for closed glycol circuits. The most common applications are process cooling, data centers, food refrigeration, and large HVAC systems with free cooling. We would take over the loading free of charge upon purchase. The buyer would only need to commission a forwarding agent. We do not provide any warranty or guarantee.

Year of construction: 2000, condition: ready for operation (used), overall weight: 2,110 kg, sheet thickness (max.): 5 mm, working length: 2,040 mm, Plate rolling machine manufactured in 2000. This FASTI 136-20-4.5 features a capacity of 2040 x 4.5 mm at 400 N/mm² tensile strength and weighs 2110 kg. It is equipped with a Fasti-Matik 5 R control unit and operates at 400 V. If you are looking to get high-quality plate rolling capabilities, consider the FASTI 136-20-4.5 machine we have for sale. Contact us for further details. Lhodpozi S U Aefx Aftsi - Capacity: 2040 x 4.5 mm (at 400 N/mm² Tensile Strength)- Weight: 2110 kg- Control Unit Model: Fasti-Matik 5 R (FM 5 / FM 5 R)- Operating Voltage: 400 V (3/N/PE~)- Frequency: 50 Hz- Control Voltage: 230 V AC / 24 V DC / 24 V AC- Connected Load: 6.356 kW- Nominal Current: 15.7 A- Circuit Diagram No.: 10X0001 B- Included Equipment: Control unit operating manual, machine instruction handbook- Working Hours: estimated as very low- Saving programs to the 3.5-inch floppy drive does not work (no access). It may be possible to replace it, though or the values must be entered manually.

Condition: like new (used), functionality: fully functional, Year of construction: 2016, operating hours: 10 h, Includes: Special iron turning tool ATRC 18 Special scroll bending tool ATAR 305 Spiral bending device ATSC Demonstration machine, no 10h worked! TECHNICAL DATA Shaft diameter mm. 30 Roller diameter mm. 128 Roller revolutions per minute rpm. 8.5 - 17 Drive motor Kw. 0.75 Main switch with release coil and built-in emergency (CP30 - CP30 R) - Reversing gear and double speed switch are mounted on a separate console (CP30 - CP30 R) - Foot switch Foot switch rotation control L/R with built-in emergency - (CP 30 PR) - Two-speed selector (CP 30 PR) - Mechanical regulation of the upper roller Mechanical regulation of the upper roller with position reading on display - Two traction rollers with ribbed surface Internal machine body made of steel - Steel shafts steel shafts, hardened and ground - Gear wheels made of special special steel with ground teeth - Rollers made of special steel with a hardness of 59/60 HRC - Outer cover in ABS - Working position horizontal (CP 30) Horizontal working position (CP 30) - Horizontal and vertical working position vertical (CP 30 R - CP 30 PR) Weight: CP 30 PR 240 kg. External dimensions mm: CP30 PR Base 680 x 800 - Height 825 ACCESSORIES Lhjdot Akxaepfx Aftji Straightening rollers with two positions - Universal rollers ( standard ) - Operating key Operating key - Operating instructions

Year of construction: 2015, condition: used, control Siemens number of workstations 4 Stück CAB unit 2 Stück Workpiece spindle: 4 Stück Height in the middle of the circular indexing tabl 1396 mm tail stock 4 Stück Workpiece spindle speed (3x) 3000 1/min Speed ??CAB unit (2x) 6000 1/min Rotary table speed (1x) 1435 1/min Workpiece spindle drive 9 Nm CAB unit 6 Nm round table 0,75 kW In our assessment, the machine is in good condition and can be inspected under power by appointment. The machine was used for cam machining. Comprehensive operating instructions are available. See the installation plan in the PDF document. Accessories, tools, and clamping devices shown are only included in the scope of delivery if explicitly stated in the additional information. Lhodpfxjzi E D Ds Aftsi Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 65487, Equipment: documentation/manual, For sale is an Innomatec LTC-802 M Leak Test Computer in like-new condition, from our company’s inventory. The device was factory-calibrated by Innomatec in 2026 and will be sold including a current factory calibration certificate. According to the manufacturer, there are currently no restrictions regarding service or spare parts availability. Lhjdpfjzltyfjx Aftei Manufacturer: Innomatec Mess und Schnellanschluss Model: LTC - 802 M Year of manufacture: 2019 Condition: like new Category ID: 404 Type ID: 2224 Type: Measuring system Technical data Manufacturer: Innomatec Model: LTC-802 M Year of manufacture: 2019 Mass flow method Pressure range: 0.05 to 5 bar Single-channel leak test device Configurable testing system Suitable for large-volume components Factory calibration 2026 Scope of delivery: Innomatec LTC-802 M Original power supply Accessories as shown in the photos Factory calibration certificate Operating instructions (as shown in the photos) Application areas Automotive industry Medical technology Industrial manufacturing Quality assurance Leak testing Automated production systems Condition Like-new condition Factory-calibrated by Innomatec (2026) Completely cleaned Ready for immediate use Note: The photos of the current factory calibration certificate are part of the listing and can be found in the attached images. Sale is made by a company with an invoice. Inspection possible by appointment. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, X-axis measuring range (tool diameter) approx. 350 mm Measuring range, Z-axis (tool length): approx. 400 mm Lhjdpfx Afezlqztjtsi Max. tool weight: 10 kg Tool holder/base holder: SK 50 Tool adapter: SK50 to SK40 Measurement display with operating instructions/manuals Tool presetter in very good condition.

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 GG 22 M 42 Lhsdpfx Asv If T Tjftji Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment

Condition: used, mileage: 160,000 km, power: 125 kW (169.95 HP), first registration: 03/2023, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,967 mm, total width: 2,020 mm, total height: 2,616 mm, loading space length: 4,250 mm, Year of construction: 2023, Equipment: air conditioning, central locking, navigation system, soot filter, A50 Front axle with increased load capacity AR2 Axle ratio i = 3.923 BA3 Active brake assist C6L Multifunction steering wheel CB7 Stabilisation level I CL1 Steering wheel adjustable in tilt and height CW2 Deletion of vehicle lowering D03 High roof D50 Continuous partition wall E1D Digital radio (DAB) E1E Digital extra: hard disk navigation E30 Battery main switch, single pole E3M MBUX multimedia system with 7-inch touchscreen E57 Electrical system for trailer socket ED4 Fleece battery 12 V 92 Ah ES0 Jump-start contact EW6 Digital extra: Remote Services Plus EX9 Digital extra: 3 years complimentary map updates EY2 Digital extra: Live Traffic Information EY5 Mercedes-Benz emergency call system EY6 Breakdown management F68 Exterior mirrors heated and electrically adjustable FF5 Overhead shelf above windscreen FJ4 Storage compartment under cockpit FZ5 Anti-theft alarm system GD8 6-speed manual transmission ECO Gear H1B Tachograph operation front under headliner H21 Heat-insulating glass with band filter on windscreen HH9 Semi-automatic TEMPMATIC air conditioning HI1 Climate zone 1 (cold/comfort) IC1 Model series C907 / C910 Sprinter IE0 Model series C907 VS30 RWD IG4 Standard IG5 Basic IK0 Complete vehicle IL1 Domestic code IL5 Left-hand drive IR6 Wheelbase 4325 mm, rear overhang 1615 mm IT4 3.5 tonner J10 Speedometer km/h J4V Pre-installation Intelligent Tachograph EU J55 Seat belt warning device for co-driver J58 Seat belt warning device for driver J65 Outside temperature display JA8 Crosswind assist JG0 Shift point indicator JH3 Communication module (LTE) for digital services K13 Main tank 71 litres KP7 Emission control SCR generation 4 L65 Ceiling lamp(s) load/passenger compartment with door contact L94 Omission of parking lights Lhjdpfx Ajzll Emeftoi LA2 Headlamp assistant LB1 Side marker lights LB5 3rd brake light LC4 Comfort roof control unit LE1 Adaptive brake light LX5 Europe M60 Alternator 14 V / 250 A M72 Vehicle HVO capable MJ8 ECO start/stop function MS1 Cruise control MT6 Emission class Euro 6d N1 MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800 rpm P21 Special price control I P23 Special price control III Q11 Longitudinal member reinforcement Q67 Rear tow hook RH2 Tyres 235/65 R 16 C RS3 Steel wheels 6.5 J x 16 S02 Driver's seat S22 Armrest for driver's seat S23 Co-driver bench seat SA5 Driver airbag SK2 Occupancy detection driver's seat T16 Sliding door right T77 Grab handle at load compartment sliding door at partition T86 Grab handle at rear right corner post V42 Lashing rails on side wall at belt rail V43 Wooden floor V94 Cable duct on side wall V95 Cable duct at rear portal VA2 Interior panelling load compartment up to roof height (wood) VF7 Upholstery fabric Maturin black FIN: W1V9076351P480990 W54 Rear doors, double-wing, opening up to side wall WM4 Factory control code 065 WZ7 Factory control code 155 X30 Registration certificate, part II X99 Manufacturer Mercedes-Benz AG XC9 COC papers XG7 Without uprating/de-rating 3,500 kg XI2 Year of modification G2-I XM1 Noise reduction measures XO5 Digital operating instructions XO9 Mercedes-Benz MobiloVan with DSB and GgD XU1 Signs / printed matter German XV0 Control code - BZM test XW9 Control code transition WLTP XZ0 Model generation 0 Y10 First-aid kit Y44 Warning triangle Z1N Approval N1 Z2E Country version EU - EFTA - UK Z4V Production Düsseldorf Z52 ECE version ZM0 Panel van Long

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System Ledpfozlkgcsx Aftohi 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: used, Year of construction: 2023, Overview This Braumanufaktur Werk II Fillmaster R18 is a compact isobaric rinsing, filling and crown-capping monoblock for glass bottles, built in 2023 by Braumanufaktur Werk II (Großalmerode, Germany). It is sold as a complete craft-scale bottling set for carbonated beverages together with a 750 L fermentation and carbonation tank (SM Inox, 2021) and a 330 L pressure loading tank (SM Inox, 2023). The monoblock combines 6 rinsing stations, 6 isobaric filling valves and 6 crown-capping heads in a single compact unit. CO₂ pre-saturation of the bottles before filling reduces oxygen pickup and product oxidation. Mechanical movements are driven by a pneumatic system (6 - 8 bar); filling parameters, production data and bottle counters are managed via the Siemens SIMATIC HMI touch panel. The line is still installed and under power, and basic functionality can be demonstrated on site. Lodpjziuazofx Aftehi Technical data - Manufacturer: Braumanufaktur Werk II GmbH (Großalmerode, Germany) - Model: Fillmaster R18 - Year of manufacture: 2023 - Machine type: isobaric rinser - filler - crown capper monoblock, glass bottles - Rinsing stations: 6 / filling valves: 6 / capping heads: 6 - Capacity: approx. 500 - 650 bph (semi-automatic, operator-dependent) - Filling system: isobaric, with CO₂ cylinder connection for bottle pre-saturation - Bottle formats: currently set up for 0.375 L glass; adaptable to other crown-cap formats - Crown caps: 26 or 29 mm, all sizes configurable - Control: Siemens SIMATIC HMI touch panel (filling parameters, production data, bottle counter) - Compressed air: 6 - 8 bar - Power: 230 V, 5 A - Dimensions: approx. 870 x 930 x H 1,910 mm Equipment - SM Inox FBTB 750 L PED fermentation and carbonation tank (2021): domed bottom, pressure lid, double insulated jacket with glycol circuit fed by an external heat pump, dedicated control panel for temperature, agitator and CO₂ injection (automatic / manual), carbonation stone fed via solenoid valve; PED Cat. III, approx. Ø 955 mm - SM Inox FCTC 330 L loading tank (2023): pressure lid with CO₂ inlet for pump-free liquid transfer between tanks, approx. Ø 640 mm - Mobile transfer / washing pump on stainless trolley - OEM technical documentation (operating manual, PLC instructions, quick guide) and declarations of conformity Condition Used - very good condition with light use: the PLC production counter reads approx. 58,600 bottles / 12,000 litres in total. Still installed and under power; the sale takes place because the owner has discontinued production. Availability Immediately. Location: Italy. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited and demonstrated on request.

Condition: excellent (used), Year of construction: 2003, x-path 350 mm y-path 240 mm z-path 340 mm Control Siemens Type 810 D Total power requirement 15 kW Machine weight approx. 1.6 t Space requirement approx. m Universal CNC tool milling machine Type DMU 35 M - 810 D Working range: X-axis (longitudinal stroke of milling slide) 350 mm Y-axis (transverse stroke of milling slide) 240 mm Z-axis (vertical stroke of table slide) 340 mm C-axis - table rotation, manual 360 ° B-axis - table swivel, manual + 105 / -15 ° Table surface (rounded) 280 x 400 mm Table load approx. 100 kg Tool holder SK 40 Spindle speeds stfl. programmable 20 - 6,300 rpm Feed values / rapid traverse stls. 20 - 5,000 mm/min. Feed drive/power 1.6 Nm AC main drive approx. 10 kW Total drive approx. 15 kW - 400 V - 50 Hz Weight approx. 1,600 kg Accessories / special equipment: - SIEMENS path control type 810 D (Processor 840 D) for interpolation in 3 axes with electronic handwheel screen, swiveling control panel, SIEMENS SHOPMILL software (version 05.03.22) with additional DECKEL MAHO Programming area for quick and easy workshop programming. - Manual tool change with SK 40 holder, pneumatic tool clamping Ljdpfx Aju Rdpisftehi - Universal table, manually rotatable & tiltable via handwheels and digital position display position display on the control screen (rotary encoder), enables 5- side machining in one clamping operation - Complete enclosure of the machine with 2 sliding doors, unfortunately currently no coolant tank available as the machine was connected to a central system. was connected to a central system. operating instructions