Used Kaltenbach for sale (117)

Condition: used, Year of construction: 1999, Cold circular saw Manufacturer: Kaltenbach Type: KKS 401 NA Year of manufacture: 1999 Saw blade diameter: 450 mm Max. cutting width: 5 mm Saw blade bore diameter: 50 mm Saw blade types: HSS solid steel blade HSS segmental saw blade Vertical vice opening stroke: With aluminum pressure piece (for miter cuts): max. 160 mm Kdsdeyax Eqopfx Ah Nsg With steel pressure piece (for straight cuts): max. 160 mm Rotary table adjustment NC-controlled, stepless +/- 60° With hydraulic motor to stop -45°/0°/+45° Manual, stepless +/-60° Automatic feed Max. stroke: 1,000 mm Programmable length max.: 9,999 mm Conveyable length: depends on discharge-side roller conveyor Max. material width: 240 mm 200126

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm Kdsdpjd N H A Nsfx Ah Nog weight of the saw approx. 1400 kg good condition

Condition: good (used), Year of construction: 2002, functionality: fully functional, cutting speed: 90 mm/min, cutting range round steel at 45°: 265 mm, cutting range round steel at 90°: 303 mm, cutting width (max.): 360 mm, table height: 300 mm, overall weight: 780 kg, cutting height (max.): 300 mm, Sawcapacity at 90 degree: Round: Ø303 mm Square WxH: 360 x 305 mm Sawcapacity at 45 degree: Round: Ø265 mm Square WxH: 265 x 300 mm Sawcapacity at 30 degree: Round: Ø175 mm Square WxH: 175 x 300 mm Sawingspeed: 20 - 90 m/min. Ksdjyac Uiepfx Ah Nsdg Sawbelt dimensions: 3830 x 25 x 0,9 mm / 3850 x 27 x 0,9 mm Workingheight: 700 mm Featured with: - Mitre sawing - Half automatic - Materialrollerconveyor ca. 8 meter - Machine manuals Country of origin: Germany Motor power: 1,1 kW Machine LxWxH: 2200 x 1250 x 1650 mm Machine weight: 780 kg

Condition: used, Year of construction: 1999, cutting width 150 mm machine weight ab. 300 kg Kdsdpfx Aheva Nqge Nsg 27468

Condition: used, Year of construction: 1989, cutting diameter 260 mm serial number 109967 volt 380 V frequency 50 Hz weight of the machine ca. 500 t Kedpfepxri Ujx Ah Nsdg

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t +++++ Please note: Kdjdpsd N Sm Dofx Ah Neg The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 2002, Available immediately ex location: Kaltenbach saw – drilling line Type KBS 750 DG plus APS 1050 Year of manufacture: 2002 3-axis drilling station equipped with NENOK coolant channel drills Infeed roller conveyor: 16 m Outfeed roller conveyor: 12.5 m Kdedpfxsyaygis Ah Njg Central control system renewed 2 years ago Price: EUR 58,000 plus VAT, ex works

Condition: used, Year of construction: 2001, saw blade diameter 400 mm miter . Kühlung weight of the machine ca. 1 t number 4 Stück +++++ Kdsdpfxslug Tue Ah Neg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 1980, Saw blade diameter: 400 mm Kdsdpfx Aox Anl Dsh Neg Cutting capacity at 90° round: 120 mm Rectangular: 200 x 80 or 150 x 70 mm Mitre cut at 45° rectangular/flat: 150 x 70 mm Upright: 100 x 60 mm 2 cutting speeds via pole-changing motor: 19 and 28 m/min Feed rate hydraulically infinitely adjustable: 0 - 1000 mm/min Drive motor: 380 V, 1.7/2.6 kW Weight: approx. 850 kg Required space: 1200 x 1100 x 1620 mm

Condition: used, Manufacturer: Kaltenbach Type: KKS Saw blade diameter 370 mm Cutting capacity 45° - 90° round 115 mm flat approx. 215 x 20 mm Kodpfxewpb E He Ah Njdg rectangular approx. 95 x 105 mm U-profile approx. 160 x 55 mm Speed: 14, 19, and 28 rpm Dimensions: 1100 x 1050 x 1600 mm (LxWxH) Weight: approx. 850 kg Equipment: • Semi-automatic operation • Hydro-pneumatic stepless saw blade feed • Mitre cuts on both sides R - L • 0° longitudinal cut possible • Coolant system • 1 saw blade The machine can gladly be demonstrated under power on site. All information without guarantee. Errors and interim sale excepted.

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year 1999 General information: Manufacturer: Kaltenbach Machine type: Automatic saw and drill line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drilling unit: KALTENBACH APS 1003 Year of manufacture: 1999 Condition: used, fully functional Location: Germany Availability: Dismantling from mid / end of March 2026 Inspection: Machine is in operation and can be inspected under power Sale: without any warranty or guarantee Machine description: For sale is a complete Kaltenbach saw and drilling line for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC and a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross-transfer conveyors. The system is currently in operation and has been used reliably for steel construction up to now. It is ideally suited for economic processing of beams and profiles for both serial production and project orders. Typical applications: - Steel construction / hall building - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-piece production Technical specifications: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre: swivels +45° / –45° to both sides - CNC-controlled length positioning - Automatic sawing operation Drilling unit APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drilling portal - Suitable for web and flange machining Roller conveyors & material handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm Kodpfx Ahjyak Anj Nodg - Cross-transfer conveyor, infeed: approx. 4,000 mm - Cross-transfer conveyor, outfeed: approx. 4,000 mm Condition: - Complete and fully functional line - Currently in operation - Age- and use-related signs of wear - Sale in as-is condition - No warranty or guarantee Scope of delivery: - KBS 851 DGNC bandsaw - APS 1003 drilling unit - Infeed and outfeed roller conveyors - Cross-transfer conveyors (infeed & outfeed) - Control cabinet / operator unit - Existing protective and safety devices - Documentation as available Dismantling & loading: - Dismantling by the buyer - Dismantling possible from mid / end of March 2026 - On site available: * Forklift * 2 gantry cranes, each with 5 t lifting capacity - Good access and loading conditions

Condition: good (used), Kaltenbach cold circular saw KKS Maschnr.6995Saegeblatt Ø 350 mm-speed 130 m/min-weight total 1200 kg Ksdpfsd Tp Nlox Ah Nedg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 119951, saw blade diameter: 760 mm, overall weight: 3,200 kg, Kaltenbach RKT 760 V Cold cutting circular saw designed for metalworking, often used in the steel and metalworking industries for precision cutting. TECHNICAL SPECIFICATIONS: -Disc diameter: up to 760 mm (it is also possible to use a disc with a diameter of 710 mm) -Power requirement: 5 kW -Machine weight: about 3.2 tons -Dimensions: approximately 2.3 x 2.15 x 2.1 meters -Cutting feed speed: adjustable from 0 to 1200 mm/min, with quick return at 3500 mm/min. -Cutting speed at 710 mm saw diameter: 11/22 m/min two-stage with V-belts -Range of gearbox adjustment: 200 mm -Cutting width: 6 mm maximum. Kdsdpsumkylofx Ah Njg -Production year 1998

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. Kodpfshzbipex Ah Nodg - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1500 01025, saw blade diameter: 400 mm, total height: 1,700 mm, total width: 1,100 mm, overall weight: 700 kg, type of input current: three-phase, cutting diameter: 130 mm, space requirement height: 2,000 mm, space requirement length: 900 mm, space requirement width: 1,200 mm, length stop: 6,000 mm, Kaltenbach KKS400E cold circular saw, year of manufacture approx. 1980–1982, fully functional, can be inspected under power. Incl. outfeed roller conveyor with 6000 mm length measuring device. Cutting range at 90°: D130 or 120x120 mm, flat material 315x40 mm. Ksdpfx Aswx Nn Ijh Njdg

Condition: good (used), Year of construction: 2000, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, underfloor saw, aluminum circular saw, semi-automatic aluminum circular saw, chop saw, glass bead saw -Manufacturer: Kaltenbach, Cold circular saw, metal circular saw with roller conveyor left/right -Type: KKS 400 E Semi-automatic without material feed -Saw blade: Diameter 400 mm -Drive power: 1.8 / 2.7 kW -Cutting area at 90 degrees flat: 305 x 20 mm / round Ø 130 mm -Cutting area at 45 degrees flat: 245 x 30 mm / round Ø 130 mm -Cutting range for square bars: 90° 120 mm / 45° 110 mm -Miter: swivels on both sides -Cutting speed: 13/26 m/min. -Saw blade feed speed: infinitely variable 0 - 1000 mm/min -Roller conveyor left: total 4000/345/H1000 mm -Roller conveyor right: total 6000/345/H1000 mm -Saw dimensions: 1150/930/H1765 mm -Overall dimensions: 10810/1150/H1765 mm Ksdpfx Ahjx Sdpyj Nsdg -Total weight: 1190 kg

Condition: used, Year of construction: 1962, machine/vehicle number: 7188, saw blade diameter: 750 mm, We are offering this used Kaltenbach HDM 750 cold saw, year of manufacture 1962. Type: HDM 750 Machine number: 7188 Hardness of hardened steel at low speed: 60-90 kg/mm² Hardness of mild steel at high speed: ≤60 kg/mm² Kodpfox T Abdjx Ah Nodg If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, saw blade diameter 400 mm cutting diameter 135 mm capacity 90 degrees: flat 280 x 70 mm capacity 90 degrees: square 120 x 120 mm capacity 45 degrees: flat 210 x 55 mm capacity 45 degrees: square 105 x 105 mm turning speeds max. 3000 U/min saw-blade dia. 400 x 3,2 x 40 mm motor 400 Volt total power requirement 4,0 kW Kodpfxjxabg Ae Ah Nedg weight 650 kg range L-W-H 910 x 1200 x 1700 mm Furnishing: - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping - Operation manual

Condition: good (used), Year of construction: 1992, cold circular saw, metal circular saw, miter saw, circular saw, sawing system -Manufacturer: Kaltenbach, cold circular saw, metal circular saw type RKT 631 HG with roller conveyor left / right -Stop length: 3900 mm -max. saw blade diameter: 710 mm -Drive power: 3.0 / 5.0 kW -Rotating base adjustment: continuously left/right -Cutting area at 90 degrees flat: 400 x 120 mm / round Ø 220 mm Kdodpfsr R Abpex Ah Neg -Cutting area at 45 degrees flat: 250 x 80 mm / round Ø 180 mm -Cutting speed: blade diameter 710 mm 11 / 22 m/min. -Saw blade feed speed: continuously variable 0 - 1000 mm/min -Accessories: incl. 2nd saw blade -Roller conveyor left: total 3500/1060/H1100 mm / weight 378 kg -Roller conveyor right: total 3960/1370/H1390 mm with stop / weight 670 kg -Dimensions saw: 1670/1760/H2020 mm / Weight 2340 kg -Total weight: 3381 kg

Year of construction: 1983, condition: used, Aluminum miter saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Saw blade diameter: 355 mm -Speeds: 1420/2880 rpm -Drive: 3.7/4.5 kW Ksded Ixn Ropfx Ah Njdg -with: coolant device -Dimensions: 990/1140/H1535 mm -Weight: 596 kg

Condition: good (used), Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting range at 90°: flat – 260 x 60 mm Cutting range at 90°: square – 105 mm Cutting range at 45°: flat – 200 x 45 mm Cutting range at 45°: square – 90 mm Speed range, 2 steps: 1400 / 2800 rpm Drive power, pole-changing: 2 / 4 kW Machine dimensions (L x W x H): approx. 1100 x 1100 x 1700 mm Weight: approx. 850 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany Kdodex Rvb Sopfx Ah Nog

Condition: good (used), Year of construction: 1997, Semi automatic Aluminium circular saw, blade Ø 350 mm, capacity Ø ca. 125 mm, motor 3,7 / 4,5 kw 2-speed 1420/2880 rpm, vertical clamp, stops 30°, 45°, 60° 90° double side, blade; dimension 100x115x155 cm, weight ca. 600 kgs Ksdpfx Ahotqfvyj Nsdg

Condition: good (used), Year of construction: 1987, functionality: fully functional, saw blade diameter: 375 mm, cutting range round steel at 90°: 135 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 680 kg, Semi automatic circular saw, blade Ø 375 mm, capacity Ø ca. 135 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, hydraulic vertical clamp, 1 horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device, measuring device 2 meters; dimension 85x110x180 cm, weight ca. 680 kgs Kjdpfox Dl Dmox Ah Nedg

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Kodpfx Aewp Ipxsh Nedg

Condition: good (used), Year of construction: 1980, functionality: fully functional, Good working kaltenbach saw machine Gearbox has been overhauled Safety hood mounted Machine has been overhauled Installation and trade-in possible If interested, please call! Kdodpfxjumb E Ej Ah Nsg Kenta Industrial Tools and Service Ambachtsstraat 3 7951 ZA Staphorst