Machining center

Emco VMC 300

Condition: good (used), Year of construction: 1998, operating hours: 28,500 h, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 240 mm, spindle speed (max.): 5,000 rpm, VMC 300 Siemens 810D control SK40 12 tool positions Laodpfx Ajwlpb Uspmof Position 1 is defective in good condition Fully functional

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Laedpfxsgyy I Ao Apmsf Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Tailstock Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 420 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 240 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 810D, workpiece height (max.): 190 mm, total height: 2,450 mm, total width: 2,400 mm, table width: 325 mm, table length: 850 mm, table load: 150 kg, overall weight: 2,900 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, number of slots in tool magazine: 12, tool weight: 5,000 g, positioning accuracy: 0.004 mm, product length (max.): 2,300 mm, number of axes: 3, This EMCO VMC 300 Vertical Machining Center was manufactured in the year 2003 in Austria. It is equipped with a Siemens SINUMERIK 810D control unit. The machine features a 12-position automatic tool changer, an SK40 spindle with speeds up to 5,000 rpm, and travels of 420 × 330 × 240 mm (X/Y/Z), making it suitable for precise milling, drilling, and tapping operations. For more information, contact us. • 2x units available (one newer and one older) with different Control Brands • Distance from Spindle Nose to Table: 210 – 450 mm • Number of T-Slots: 3 • T-Slot Width: 14 mm • T-Slot Spacing: 100 mm • Spindle Bearing Diameter: Ø60 mm • Bearing Type: Angular Contact Ball Bearing • Tool Taper: SK40 (DIN 69871 / ISO 7388-I) • Pull Stud: M16 (DIN 69872 / ISO 7388-II) • Automatic Tool Clamping • Tool Clamping Force: 6,000 N • Spindle Overhang: 330 mm • Spindle Motor Power: 9 / 11 kW (100% / 60% Duty Cycle) • Optional Spindle Speed: 0 – 8,000 rpm • Maximum Torque: 100 Nm (5,000 rpm) / 78 Nm (8,000 rpm Option) • Noise Level: 72 dB(A) at 5,000 rpm • Milling Capacity in Steel (16MnCr5 – 790 N/mm²): 220 cm³/min • Maximum Drilling Capacity in Steel: Ø25 mm • Maximum Tapping Capacity in Steel: M20 • AC Servo Drives with Ball Screw Spindles • Feed Rate (X/Y/Z): 0.01 – 12,000 mm/min Ljdpfxjya Hg Nj Apmoaf • Rapid Traverse (X/Y/Z): 12 m/min • Feed Force X/Y: 6,000 N • Feed Force Z: 8,800 N • Resolution: 0.001 mm • Tool Carrier: Drum Type with Direction Logic • Automatic Tool Changer • Maximum Total Tool Weight in Magazine: 36 kg • Maximum Tool Diameter: 100 mm • Maximum Tool Length: 220 mm • Tool Change Time: T1: 5.8 s / T2: 3.9 s / T3: 3.9 s • Chip-to-Chip Time (VDI 2852): T1: 8.9 s / T2: 7.0 s / T3: 7.0 s • Coolant Tank Capacity: 100 L • Coolant Pump Flow Rate: 10 L/min • Maximum Coolant Pressure: 3.7 bar • Coolant Supply: 4 External Nozzles • Automatic Central Lubrication for Guideways and Ball Screw Spindles • Grease Lubricated Main Spindle Bearings • Power Supply: 3/PE ~ 400 V / 50–60 Hz • Maximum Voltage Fluctuation: +5% / -10% • Connected Load: 15 kVA • Rated Current: 22 A • Maximum Current: 25 A • Main Fuse: 35 A (Slow-Blow) • Required Short-Circuit Power: 1600 kVA • Pneumatic System Pressure: 5 – 10 bar • Minimum Air Flow: 750 L/min • Average Air Consumption: 180 L/min Additional Equipment • Automatic 12-Position Tool Changer • Automatic Central Lubrication System • Coolant System with 4 External Nozzles • Automatic Tool Clamping System • SK40 Spindle Interface Machine Benefit: • Reliable 12-Station Automatic Tool Changer • Integrated Automatic Lubrication System for Guideways and Ball Screw Spindles Dimensions Machine Depth 2300 mm Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2004, emco VMC 300 D - CNC Milling Machine - SIEMENS Sinumerik 810D CNC Control - Tool magazine for 12 tools - CNC dividing head / 4th axis - Coolant system - 41,300 operating hours - Year of manufacture: 2004 Technical data Working area: Laodezl D Awepfx Apmef - Travel in X-axis: 420 mm - Travel in Y-axis: 330 mm - Usable travel in Z-axis: 240 mm - Workpiece dimensions L x W x H: 400 x 300 x 190 mm - Distance between spindle nose/table surface: 210 - 450 mm Milling table: - Clamping area L x W: 850 x 325 mm - Max. table load: 150 kg - 3 T-slots according to DIN 650: 14 mm - T-slot spacing: 100 mm Milling spindle: - AC motor, power (100/60% duty cycle): 9 / 11 kW - Speed range (continuously variable): 0 - 5000 rpm - Sound pressure level at 5000 rpm: 72 dB A - Max. torque: 100 Nm Machining performance: - Milling performance in steel (16 Mn Cr5 - 790 N/mm²): 220 cm³/min - Drilling performance in steel: ø 25 mm - Thread cutting performance in steel: M20 Feed drive (AC motor with individual drive + ball screw): - Feed rate in X/Y/Z axes: 0.01 - 12000 mm/min - Rapid traverse in X/Y/Z axes: 12 m/min - Feed force in X/Y axes: 6000 N - Feed force in Z axis: 8800 N - Resolution: 0.001 mm - Positioning accuracy X/Y/Z: 0.004 mm Tool system: - Tool magazine: Drum with direction logic - Number of tool stations: 12 - Insertion force: 6000 N - Max. permissible tool weight: 5 kg - Total permissible tool weight in magazine: approx. 36 kg - Max. tool diameter: 100 mm - Max. tool length: 220 mm - Chip-to-chip time according to VDI 2852 T1/T2/T3: 8.9 / 7.0 / 7.0 s - Tool change time (without traverse movements) T1/T2/T3: 5.8 / 3.9 / 3.9 s Lubrication system: - Guide rails & ball screw: automatic central oil lubrication - Main spindle bearing: grease lubrication Coolant system: - Tank capacity: 100 l - Max. flow rate: 10 l/min - Max. delivery pressure at 50 Hz: 3.7 bar - Coolant supply: 4 nozzles, external Electrical connection: - Power supply: 3/PE 400 V 50/60 Hz - Connected load: 15 kVA Pneumatic connection: - System pressure: 5 - 10 bar - Required minimum air flow (related to 1 bar): 750 l/min - Average air consumption (related to 1 bar): 180 l/min Dimensions: - Dimensions W x H x D: 2300 x 2450 x 2400 mm - Weight: approx. 2900 kg

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, type of input current: AC, Machinge is in perfect working shape. It is very quick machine, pick-up was remanufactured. Selling due to retirement in the future. Lasdonyiyaopfx Apmof The remaining machines, complete equipment will also be for sale in the future. Three cnc machines, two forklifts, etc... Not all items are in the pictures because there is a limit of 15 photos. Contact for photos.

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm Lsdpfjgbfaxex Apmoaf

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1110809, HAAS Mini Mill 2 CNC Machining Center – Year of Manufacture 2014 For sale: a HAAS Mini Mill 2 CNC vertical machining center from 2014. This compact and versatile machine is suitable for precision machining of small to medium-sized workpieces and is widely used in machine construction, supply industries, and general machining. Technical specifications: Manufacturer: Haas Model: Mini Mill 2 Year of Manufacture: 2014 Control: Haas CNC Control Travels (X/Y/Z): approx. 406 x 356 x 508 mm Tool changer: 10 positions Taper: CT40 Coolant system available Special features: The machine was taken out of production approximately 2 years ago and has not been used since. It was fully operational before being taken out of service. The control system has the latest available Haas software update. Lsdpfx Apozai T Semsaf The machine is offered complete, including standard equipment and tooling. Condition: The machine is in good optical and technical condition. The machine has been fully inspected by a Haas dealer. Availability: The machine is available immediately. Inspection is possible by appointment. Please contact us for additional information, photos, or a price quote.

Condition: used, Year of construction: 1996, operating hours: 7,827 h, functionality: fully functional, machine/vehicle number: 119713, turning diameter over cross slide: 160 mm, turning length: 244 mm, turning diameter: 160 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 290 mm, spindle motor power: 10,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 1,780 mm, total length: 2,000 mm, total width: 1,330 mm, quill travel distance: 150 mm, quill diameter: 55 mm, quill stroke: 150 mm, workpiece weight (max.): 25 kg, overall weight: 2,700 kg, bar passage: 40 mm, chuck outer diameter: 154 mm, bar diameter (max.): 45 mm, spindle diameter: 50 mm, Equipment: documentation/manual, rotational speed infinitely variable, The Mazak Quick Turn 10 is a compact CNC lathe manufactured by the Japanese company Mazak. It has been specifically developed for the precise machining of small and medium-sized turned parts and is widely used in mechanical engineering, toolmaking, as well as in series production. The machine features a robust slant-bed design, a tool turret, and the dialog-based Mazatrol control system, which enables fast programming directly at the machine. This makes it suitable both for single parts and small series production. Control: Mazatrol T-Plus Standard chuck: Kitagawa N-06A0515 The quoted price does not include dismantling, packaging, or shipping. Sale ex location, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded. Lasdpfoyt E Nvox Apmsf

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Maximum turning length: 630 mm Tool turret with 12 positions VDI 40 Chuck diameter: 250 mm Lajdpfx Apov T Un Djmef Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Chip conveyor. For further information, see data sheets. The machine is in good condition and can be demonstrated under power. Machine documentation is available.

Year of construction: 2002, condition: excellent (used), 10-2 bar, year of manufacture 2002 Laedpeykyqiofx Apmsf