Used Okuma Lb 200 M for sale (225)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 345, type of input current: three-phase, Equipment: documentation/manual, We are offering this very well-maintained Okuma LB200-M-C CNC lathe, year of manufacture unknown. Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Maximum power consumption: 20.5 kVA Total current consumption: 29.6 A Maximum motor current consumption: 47 A Current interruption at: 10 kA Diagram No.: W6200-100-956-5 Serial No.: 0345 Itjdezyfw Sopfx Ahvol If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 178501, turning length: 1,000 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 700 mm, total height: 2,000 mm, total length: 5,000 mm, total width: 2,200 mm, overall weight: 5,000 kg, controller manufacturer: OKUMA, controller model: OSP-P 300 L, input voltage: 400 V, input frequency: 50 Hz, input current: 154 A, nominal power (apparent): 29 kVA, Equipment: chip conveyor, OKUMA LB 3000 EX 2 - M C 1000 CNC lathe - includes driven tool stations and a C-axis The machine is equipped with a tailstock, a 12-position tool turret, and a three-jaw chuck, diameter: 250 mm, manufacturer KITAGAWA, including a chip conveyor. FCA D-63843 Niedernberg Itedpfjzxyd Djx Ahvsl

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year: 2007 - including chip conveyor Itedpov S Svvsfx Ahvjl - coolant tank - immediately available

Condition: good (used), Year of construction: 2006, Used lathe by OKUMA - Model: LT 200-M TwinStar Ijdpfx Ahov S Su Sovjtl - Year of manufacture: 2006

Condition: excellent (used), Year of construction: 2005, operating hours: 6,820 h, functionality: fully functional, turning length: 1,075 mm, turning diameter: 620 mm, spindle bore: 110 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,075 mm, rotational speed (min.): 3,000 rpm, total height: 2,780 mm, total length: 5,800 mm, total width: 2,100 mm, overall weight: 8,600 kg, CNC Lathe with c-axis Okuma - LB 400M MACH-ID 9780 Make: Okuma Type: LB 400M Control: OSP-E100L Year: 2005 KITAGAWA 400 mm chuck Spindle bore 110 mm Chip conveyor Feed rate X-Axis 20M/Min Feed rate Z-Axis 25M/Min Coolant and Filtration system Iedezu Nu Ropfx Ahvstl Max. turning Ø: 620mm X-Axis: 300mm Z-Axis: 1075mm Spindle bore: 110mm Speedrange: 3500Rpm Spindle power: 45kW ATC / revolver: 12 Speed live tools:3000Rpm Chip conveyor: Yes Tool eye: Yes Hours: 6820H Pinole taper: 5Mk Length: 5800mm Width: 2100mm Height: 2780mm Weight: 8600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,250 mm, turning diameter: 620 mm, spindle bore: 120 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,275 mm, spindle motor power: 22 W, total height: 1,925 mm, total length: 3,980 mm, total width: 1,880 mm, overall weight: 7,600 kg, bar passage: 80 mm, spindle nose: JIS-A2-8, Equipment: documentation/manual, OKUMA SPACE TURN LB400-M – CNC TURNING CENTER OKUMA SPACE TURN LB400-M – a robust and powerful Japanese CNC turning and milling center designed for precision machining and series production of metal components. The machine is built on the proven OKUMA platform and offers high rigidity, reliability, and excellent performance for demanding CNC turning applications. The LB400-M version is equipped with driven tools and a C-axis, making it suitable for complex machining operations and allowing multiple machining processes to be completed on a single machine. Isdpfezwdw Eox Ahvstl MACHINE DATA Manufacturer: OKUMA Model: SPACE TURN LB400-M Type: CNC Turning & Milling Center Machine type: CNC Lathe / CNC Turning Center CNC Control: OKUMA OSP Number of axes: 2 + C-axis Turret: 12-position turret Driven tools: Yes C-axis: Yes Hydraulic chuck: Yes Coolant system: Yes Chip conveyor: [YES / NO] Tailstock: [YES / NO] Condition: Used / Good working condition MAIN FEATURES Robust Japanese OKUMA construction CNC turning and milling capability C-axis for complex machining operations Driven tooling 12-position automatic turret Hydraulic chuck High rigidity and stability Suitable for both single-part and series production Excellent machine platform for heavy-duty turning applications Machine available for inspection and testing The machine has a 3-year-old refurbished main spindle and X-axis.

Condition: ready for operation (used), Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible. Itjdpfx Ajwmdv Nehvjl

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 2620 mm Measurements depth 4865 mm Machine weight 11700 kg Control Unit Brand OKUMA Model n/a Main Drive Spindle speed range 3500 Tool taper ASA 8 Number of axis 2 Movement X-Axis Movement 230 mm Z-Axis Movement 670 mm Turret Tool taper VDI 40 This 3-axis Okuma LB 25 II-M was manufactured in 1998. A robust horizontal turning machine featuring an Okuma OSP 5020L control, it offers a spindle speed of 3,500 rpm and a 12-position tool turret. It handles a max workable diameter of Ø 420 mm and lengths up to 1,250 mm. Consider the opportunity to buy this Okuma LB 25 II-M horizontal turning machine. Contact us for more information about this machine. Iedpfx Aox D R Rfohvjtl Application Types Turning

Condition: new, Year of construction: 2018, functionality: fully functional, Standard technical data: Swing diameter over bed: 580 mm Swing diameter over carriage: 470 mm Maximum machinable diameter: 360 mm Max. workpiece length: 250 mm Traverse (X): 260 mm Traverse (Z): 350 mm Traverse (Y): 100 mm (+/- 50) C axis: 360 degrees (0.001-degree increments) Spindle speed: 50-6,000 rpm Spindle nose: JIS A2-6 Spindle bore diameter: Ø62 mm Front spindle bearing diameter: Ø100 mm Turret type: M-V12 Number of tools: 12 Tool size: 20x20 mm Tool shank diameter: Ø32 mm Tool change time: 0.1 sec Driven tool speed: 45-6,000 rpm Rapid traverse (X): 25 m/min Rapid traverse (Z): 30 m/min Rapid traverse (Y): 12.5 m/min Main motor power (15 min/continuous): 11/7.5 kW (PREX) Driven tool motor power: 5.5/3.7 kW (PREX) Machine dimensions (L x W x H): 2,020 x 1,734 x 2,250 mm Machine weight: 4,050 kg Control: OSP P300L Standard specification: 1 OKUMA CNC Lathe Model LB2000 EXII MYC with OSP-P300L CNC Controller, including CE mark & EMC 1 set European Standard Specification 1-1. V12 radial turret head, 1 set 1-2. Spindle, 1 set (1) Spindle speed: 50-6,000 rpm (1 set) (2) Spindle motor PREX 11/7.5 kW (1 set) (3) Spindle: JIS A2-6; bore Ø62 mm (1 set) (4) C-axis control, 360 degrees (0.001-degree increments) (1 set) (5) SR1146 hydraulic cylinder for chuck (1 set) 1-3. MT4 tailstock 1-4. Dual-action foot pedal for chuck and tailstock side, 2 sets 1-5. Driven tool motor PREX 5.5/3.5 kW (2 min continuous) 1 set 1-6. Driven tool speed: 45 - 6,000 rpm, 1 set 1-7. Work area lighting, 1 set 1-8. Full enclosure, 1 set 1-9. Chip tray, 1 set 1-10. Door interlock, 1 set 1-11. Lubrication monitoring, 1 set 1-12. Automatic chuck open/close on main spindle, 1 set 1-13. Chip air blow, 1 set 1-14. Foundation bolts, 1 set 1-15. Tool setter, 1 set 1-16. CE marking, 1 set 1-17. IEC standard compliance, 1 set 1-18. Transformer, 1 set 1-19. Coolant system with 250W pump, 1 set 1-20. OSP-P300L CNC control with 15" color touchscreen monitor, 1 set 1-21. OSP-P300L Advanced One Touch IGF-M-E kit specification (1 set) * Multitasking machines coordinate conversion (1 set) * Multitasking machines profile generation (1 set) * Advanced One Touch IGF (graphical programming assistant with dialogue-based interface) (1 set) * Real 3D simulation (1 set) * Cycle time monitoring (1 set) * Load monitor (1 set) * NC operation monitor (1 set) * Cycle time reduction function (1 set) * Hi-Cut Pro (machining-specific servo optimization) (1 set) Isdpoy H H Afsfx Ahvjtl * Variable spindle speed control (1 set) 1-22. 2-stage position indicator lamp, 1 set 1-23. Program storage: 2GB, 1 set 1-24. Operation memory: 2MB, 1 set 1-25. Spindle orientation, electric, 1 set 1-26. Inch/metric conversion, 1 set 1-27. Ball screw pitch error compensation on X/Z axes, 1 set 1-28. Workpiece ejection monitoring, 1 set 1-29. Lifting hooks, 1 set 1-33. TAS-C thermal compensation on the frame 6” chuck Chip conveyor

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 132542, turning diameter over cross slide: 470 mm, turning length: 300 mm, turning diameter: 580 mm, spindle bore: 62 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 380 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,839 mm, total length: 1,865 mm, total width: 1,734 mm, overall weight: 3,200 kg, Equipment: documentation/manual, OKUMA LB2000EX-MC x 300mm OSP P200L CNC-Controller Number of axis - 3 Swing over bed - 580mm Swing over cross slide - 470mm Max dia. turning - 360 mm Max turning length - 300 mm X axis travel - 260 mm Z axis stroke - 390 mm Rapid X-axis 25,000 mm/min Z axis rapid 30,000 mm/min Spindle nose - Flat Main spindle speed - 6000 rpm Main spindle power - 11 kW Main spindle diameter - 100 mm Kitagawa 6 inch chuck Driven tools - 6000rpm Driven tools - 5,5kW Turret type VDI 12 Stations Square tool section - 20mm Boring bar section - 32mm Tailstock Quill diameter - 70mm Itjdpfx Aexrnr Njhvel NC tailstock stroke - 415mm Konus - MK 4 Chip conveyor type high Wight - 3200kg One Touch dialog with colour High presure coolent

Condition: used, Year of construction: 2004, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. The machine is being sold partially overhauled. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Itjdpfx Aszzwmuohvjl Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, spindle motor power: 30,000 W, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm • Control: Okuma OSP P300L (OSP Suite), 15" screen • Configuration: Main spindle (left) + sub-spindle (right), Y-axis, turret with driven tools (radial tool mounting) • Max turning diameter: 340 mm • Spindle speeds: • Left (main): 42–4,200 rpm • Right (sub): 50–6,000 rpm • Spindle motors: • Left (main): PREX 30/22 kW • Right (sub): PREX 11/7.5 kW • Special main spindle (“Big Bore” option): Ø91 mm, nose JIS A2-8, 42–4,200 rpm, PREX 30/22 kW, max torque 700 Nm • Control/monitoring functions: • Spindle orientation • Cutting load monitoring (“Load Monitor”) selectable for all axes and spindles • One-Touch IGF M-E conversational programming • Tool life monitoring: by workpiece count, by cutting engagement time, by cutting load; automatic sister-tool change or stop/alarm if no replacement • Machine options: Additional flushing for left slideway covers Additional equipment • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets • Workholding (chucks) • SMW‑Autoblok BBD250‑77 / A8, hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder VN170‑77, drawtube ID 72 with cylinder flange • Max speed: 4,000 rpm; bar capacity: Ø72 mm • Kitagawa B206 (Ø170 mm), hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder SR1146, drawtube/cylinder flange, ejector • Max speed: 6,000 rpm • Part handling • Part catcher, swing-bucket type, Ø80 × L150 mm, max 5.8 kg • Chip management • Cromar chip conveyor for LB3000 EX II C1000, slat type, right-hand discharge • Bar feeding and interfaces • Bar feeder interface (OSP P300L) • IEMCA KID 80+ bar feeder (SX – Left) for Okuma LB3000 EX II • Includes: 7" touchscreen HMI, mechanical/electrical interface kit, additional light kit, roller guide kit for round/hex bars, spindle extension, bar pusher D=26 mm, bar pusher D=15 mm, paper manuals Itjdpfx Asx D Rvnohvjl • Accessories: Floor frame for longitudinal movement in Z; spindle liner/reduction tube Technical Specification Counter Spindle Yes Driven Tools No

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of manufacture: 2008 Iodpfozwlw Tjx Ahvstl Internal machine number: 69 Turning length: 500 mm Turning diameter: 340 mm Swinging diameter over bed: 530 mm Spindle speed: 4,200 rpm Tool holder: BMT 60 Tool turret, 12 stations (powered) C-axis: 0.001 degrees Equipment: - One-touch IGF - Chip conveyor - Touch setter - 3-jaw chuck Kitagawa B-210 - NC tailstock

Condition: used, Year of construction: 2001, Technical data: Okuma Space Turn LB 300 MY Itjdpfjqucnbjx Ahvol Year of manufacture: 2001 Control: OSP U 100 L Max. Turning length: 340 mm Chuck diameter: 10 inch X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360°(0.0001°) Spindle: 4500 rpm Spindle clearance: 62 mm Weight: 6000 kg Accessories: -Driven tools -Chip conveyor -Transformer -Manuals

Condition: good (used), Year of construction: 2000, functionality: fully functional, Technical details turning diameter 420 mm turning length 650 mm control Okuma OSP-U100L spindle bore 95 mm spindle turning speed range 2800 U/min travel -x axis 300 mm travel -z axis 675 mm main drive motor 22/30 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 2700 x 1900 x 1885 mm Additional information First put into operation 2001. - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor Iedpfxezr Hyfs Ahvotl

Condition: good (used), Year of construction: 1998, functionality: fully functional, Controller OSP700L Swing dia 300 mm Turning dia 170 mm Between centers 340 mm Itsdpsvmzc Usfx Ahvol X travel 150 mm Z travel 350 mm C axis 360/0,001 degree Spindle hole D42 mm Chuck dia 200 mm Turret 12-fold Tool holder type VDI30 Spindle speed 50 - 6000 rpm Spindle power 5,5/7,5 kW Power required 400V, 15 kVA Weight 3500 kg Dimensions LxWxH = 2300 x 1635 x 1850 mm Accessories - C axis and live tool turret - Hydraulic tailstock - Coolant unit - Chip conveyor - Hydraulic 3 jaws, D160 mm chuck - Machine light Good condition, still under power.

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,065 mm, spindle motor power: 30,000 W, total height: 1,970 mm, total width: 1,900 mm, overall weight: 6,000 kg, product length (max.): 3,310 mm, number of axes: 5, This 5-axis Okuma LB 3000 EX MYW 800 was manufactured in 2011. It features a maximum turning diameter of 410 mm and a distance between centers of 1,020 mm. The machine includes a robust tool turret with 12 positions and a maximum spindle speed of 4,200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EX MYW 800 horizontal turning machine we have for sale. Contact us for further details. • Working capacity: • Distance between centers: 1,020 mm • Maximum swing over covers: 580 mm • Swing diameter between centers: 470 mm • Maximum turning diameter (standard tools): 410 mm • Maximum turning diameter (driven tools): 340 mm • Main spindle: • Type: Big Bore ASA 8 • Air blow system for the self-centering chuck • Spindle opening and closing possible during rotation • Axis travel: • W: 825 mm • Rapid traverse: • X: 25 m/min • W: 25 m/min • Z: 30 m/min • Y: 12.5 m/min • Sub-spindle: • Connection: Flat 140 • Maximum speed: 6,000 rpm • Tool turret: • Type: OKUMA • Tool positions: 12 Itjdpfxjzpwu Uj Ahvsl • Driven-tool power: 7.1 kW / 4.1 kW • Maximum driven-tool speed: 6,000 rpm Additional equipment • LNS Quick Load Servo III bar feeder • Bar interface preparation • Right-side chip conveyor • Finished-part catcher arm • MSCTN80 A8 collet chuck with various collets • Tool holder kit • Kitagawa BB210 self-centering chuck • Kitagawa B206 self-centering chuck Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2005, functionality: fully functional, turning length: 700 mm, turning diameter: 210 mm, spindle speed (max.): 5,000 rpm, overall weight: 7,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Max.: 210 mm Bench turning diameter: 400 mm Max. machinable length: 700 mm X/Z travel: 192/700 mm Stroke against spindle (W-axis): 730 mm C-axis: 0.001° Rapid traverse X/Z: 30/32 m/min Main spindle speed: 5000 rpm Motor: 11/7.5 kW 2 turrets: 12 stations Machine dimensions: 2700 x 2000 x 1980 mm Machine weight: 7000 kg Equipment: 2 turrets, 12 stations, VDI 30 Measuring tool IRCO SiMag Iedpfx Aezhwnrshvstl

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 380 mm, controller manufacturer: OKUMA, controller model: OSP‑P200LA‑R, number of axes: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2011. It features a maximum turning diameter of 200 mm and a Z-axis travel of 380 mm. The machine is equipped with a 12-station turret with driven tools, allowing for milling and drilling on the C-axis. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning center we have for sale. Contact us for further details. Isdpfx Aey Rrwvjhvjtl • Turning configuration: 2 axes (X, Z) + C‑axis; no Y‑axis • Tailstock: Equipped • Tool presetter: Automatic tool presetter installed • Turret: 12‑station turret with driven tools (milling and drilling on C‑axis) • Max. turning diameter: 200 mm • Spindle nose: ASA A2‑6 • Spindle bore diameter: approx. 50 mm • Electrical supply: 380 V, 3‑phase, 50/60 Hz • Average apparent power: 17.7 kVA • Full‑load current: 26.7 A • Max. motor current draw: 45 A Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 3,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 500 mm, spindle motor power: 22,000 W, number of axes: 5, This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It features a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma LB 300M X 500 horizontal turning machine we have for sale. Contact us for further details. • CNC: OSP U100L • Max turning diameter: 340 mm • Max turning length: 480 mm • Distance between centers: 500 mm • C-axis: 360° (0.001° increment) • Rapid feed: X 20,000 mm/min; Z 25,000 mm/min • Spindle nose: ASA 6 • Bar capacity: 65 mm • Live tooling: 45–4,500 rpm; 3.3 kW • Turret: V 12 NCM (12 stations); VDI 40 • Tool section: 25 mm (square) / 40 mm (boring bar) • Tailstock: quill Ø 90 mm; travel 120 mm; taper MT5 • Certification: CE certified with manuals Additional equipment • Kitagawa B208 chuck • Chip conveyor • High-pressure coolant pump • Robot interface • Automatic door • Air blow • Turning tool holder kit • 4 radial live tools • 4 axial live tools Itodpfjy N Sabex Ahvsl Technical Specification Taper Size VDI 40 Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2010, spindle speed (max.): 4,500 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 11,000 W, total height: 1,569 mm, overall weight: 3,800 kg, controller manufacturer: OKUMA, controller model: OSP P200 L, number of axes: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2010. It features a maximum turning diameter of 200 mm and a turning length of 380 mm. The machine is equipped with a spindle speed of 4,500 rpm and a main spindle power of 11 kW. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning machine we have for sale. Contact us for further details. • Max swing over covers: 450 mm Iodey A I Stopfx Ahvotl • Max turning diameter: 200 mm • Max turning length: 380 mm • Spindle nose: ASA A2-6 • Front bearing diameter: 100 mm • Spindle bore: 62 mm • Bar capacity: 50 mm • Rapid traverse (X/Z): 20–25 m/min • Tailstock taper: MT No. 5 • Tailstock quill stroke: 100 mm • Turret type: VDI-30 V12 • Indexing time (1 position): 0.1 sec • OD tool size: 20 x 20 mm • ID tool size: 32 mm • Live tool speed: 6,000 rpm • Live tool power: 4.0 / 1.8 kW • Floor space: 2.081 x 1.550 m • Total power on time: 23,498 hours • Operating time: 6,490 hours • Cutting time: 5,278 hours Additional equipment • Static tool holder kit included Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2011, CNC Turning and Milling Center Okuma LT 2000 EX – M Control: OSP-P200LA Year of manufacture: 2011 Internal machine no. 23 Swing diameter over bed: 400 mm Distance between centers: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: Z-axis: 700 mm W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001) Equipment: 2 tool turrets, each with 16 stations (all stations driven) Touch setter IGF Chip conveyor Bar feeder, 3.00 m Main spindle collet chuck Sub spindle 3-jaw chuck Itsdpoyli Aksfx Ahvol Parts catcher Workpiece removal system Extraction unit Coolant system with high-pressure pump and paper band filter system

Condition: excellent (used), Year of construction: 2017, CNC Lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of manufacture: 2017 Internal machine no.: 22 Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret: V12 (all stations driven) Equipment: Chip conveyor Touch setter OneTouch IGF 3-jaw chuck Tailstock Itjdsyk Uimepfx Ahvjl

Condition: excellent (used), Year of construction: 2007, CNC Lathe Okuma LB 3000 EX -M C1000 Control: OSP-P200 Year of manufacture: 2007 Internal machine no.: 17 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 580 mm Iedpfx Aoyk Sgpohvotl Spindle speed: 45 – 5,000 rpm Tool turret: 12 stations (driven) Bar capacity: 80 mm Direct mount: BMT 60 Equipment: - One Touch IGF - Chip conveyor - Touch setter - 3-jaw chuck (SMW 315 HB), capacity 85 mm - NC tailstock - Multi-language control - Coolant pump 8 bar

Condition: good (used), Year of construction: 2012, CNC Lathe Okuma Genos L200E-M with Gantry Control: OSP-200LA-R Year of manufacture: 10/2012 Internal machine no.: 13 Max. turning length: 380 mm Turning diameter: 200 mm Swing over bed: 450 mm Ijdpfsylkcrjx Ahvjtl Spindle speed: 107 - 4,500 rpm Spindle bore: 66 mm Turret: M-V12 (VDI) Tool rotation speed: 50 - 6,000 rpm Rapid traverse (m/min): X: 20 / Z: 25 Accessories/Equipment Gantry loader type ATPGR-03 for workpiece size Ø 20 - 150 mm, max. workpiece weight 2 x 3 kg (double gripper) for OKUMA Genos L200E-M Chip conveyor Touchsetter Hydraulic tailstock Coolant pump Tool package