Used Okuma Lt 2000 for sale (180)

Year of construction: 2001, condition: ready for operation (used), A CNC lathe Okuma Soarer L270E is offered. Turning length: 500mm, turning diameter over bed: 530mm, max. spindle speed: 4200rpm, machine dimensions X/Y/Z: approx. 2800mm/1850mm/2000mm, weight: approx. 3700kg, control: OSP-U10L. Functional, spindle may need to be replaced. An on-site inspection is possible by appointment. Bjdpfxexph Sqs Acyedi

Condition: not inspected (used), turning diameter / mm turning length / mm control / total power requirement / kW weight of the machine ca. / t required space / m Machine runs intermittently. Has a thermal problem. When it has been switched on for 2-3 hours and the electronics have warmed up, the machine can then be switched on and works without any problems. Bdjdpfxowz Ryqj Acyei Feature Typical value / description Machine type CNC lathe (horizontal, 2-axis) Centre distance approx. 500–1000 mm Turning diameter over bed approx. 400–500 mm Turning diameter over carriage approx. 200–300 mm Spindle speed up to 3500 rpm (variable) Spindle bore approx. 50 mm Tailstock partially available, sometimes automated Tool turret 8 or 12 stations Drive AC servo motors, depending on version All information is provided without guarantee. This information is for guidance only. Further information is available on request.

Condition: used, Year of construction: 1990, Used 20 mm Cold Forming Machine Manufacturer: Asahi-Okuma (Japan) Year of manufacture: 1990 Model: AF-2020-5 Station No.: 5 Cutting diameter: Max. 20 mm (tensile strength below 70 kg/mm²) Cutting length: 210-15 mm Projection length: Bdedpfjxlac Hex Acyoi Punch side projection: Max. 52 mm Main die x depth: 115 mm diameter x 250 mm Punch die x depth: 85 mm diameter x 150 mm Cutting die x depth: 80 mm diameter x 80 mm Ejector die diameter: 30 mm diameter Cutting die diameter x thickness: 80 mm x 40 mm Die center distance: 140 mm Crank stroke: 380 mm Transfer stage length: 210 mm Head piece net diameter: 45 mm diameter. Punch net diameter: 100 mm diameter. Force: 250 tons Production capacity: 100 units/min (max.) Main motor: 75 kW (6/8/12 poles) Machine weight: 75 tons Machine dimensions: 9.1 x 3.45 m

Condition: repair required (used), Year of construction: 1999, functionality: limited functionality, machine/vehicle number: 0329, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, nominal power (apparent): 19 kVA, controller manufacturer: OKUMA, controller model: OSP700M, total height: 2,700 mm, total length: 3,000 mm, total width: 2,320 mm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, OKUMA MX45 VAE Machining Center The machine is in good condition; however, a supply unit (electronic component) is currently defective. The machine can be inspected under power, but due to the defect, it does not operate (error present). Otherwise, the machine control is functional. The mechanical components are in perfect working order (e.g., spindle, ATC, etc.). Internal coolant supply (IKZ) is available. The machine was primarily used for machining aluminum parts. Spindle taper: MAS BT40 Original documentation for the machine is available. The machine is offered for sale without clamping devices, tools, or tool holders. Bodpfx Ajvyp Ncscyodi --- Loading --- Loading is not free of charge. However, we will assist you in organizing professional transport from the current installation site to the collecting truck.

Condition: good (used), functionality: fully functional, spindle speed (max.): 6,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,150 mm, table length: 2,800 mm, table width: 1,500 mm, Equipment: rotational speed infinitely variable, X-axis: 3.000 mm Y-axis: 2.000 mm Z-axis: 1.150 mm Table size: 2.800 x 1.500 mm Spindle nose: ISO 50 Spindle speeds: 30 - 6.000 rpm ATC: 50 pockets CNC controller: OSP7000M Distance between columns: 2.050 mm Featured with: - Vertical milling head attachement - Touch probe Bsdpfx Asxixrbocyedi - Double chip conveyor (recently renewed) - Cooling unit (recently renewed) - Machine manuals Country of origin: Japan Machine LxWxH: 9.000 x 3.500 x 3.500 mm +/- Machine weight: 27.500 kg

Condition: excellent (used), Year of construction: 1998, operating hours: 77 h, functionality: fully functional, turning length: 320 mm, turning diameter: 260 mm, spindle bore: 62 mm, spindle speed (max.): 4,200 rpm, spindle speed (min.): 100 rpm, spindle motor power: 7,500 W, total height: 1,610 mm, total length: 1,520 mm, total width: 1,630 mm, swing diameter over cross slide: 350 mm, turning diameter over bed slide: 450 mm, overall weight: 2,800 kg, number of tool stations in tool turret 1: 12, Okuma LCS-15 OSP 700L CNC controller Bodpfx Aexm T Dyocyjdi Machine its in very good condition, ONLY 77 Hours!

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 2620 mm Measurements depth 4865 mm Machine weight 11700 kg Control Unit Brand OKUMA Model n/a Main Drive Spindle speed range 3500 Tool taper ASA 8 Number of axis 2 Movement X-Axis Movement 230 mm Z-Axis Movement 670 mm Turret Tool taper VDI 40 This 3-axis Okuma LB 25 II-M was manufactured in 1998. A robust horizontal turning machine featuring an Okuma OSP 5020L control, it offers a spindle speed of 3,500 rpm and a 12-position tool turret. It handles a max workable diameter of Ø 420 mm and lengths up to 1,250 mm. Consider the opportunity to buy this Okuma LB 25 II-M horizontal turning machine. Contact us for more information about this machine. Application Types Bedpfxjxirite Acyjdi Turning

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller OKUMA OSP P200-M Table size 1000 x 460 mm Table load 700 kgs X travel 762 mm Y travel 460 mm Z travel 460 mm Spindle speed 15000 rpm Tool holder type MAS BT40 ATC magazin 20-fold Weight 6500 kgs Dimensions LxWxH = 2750 x 2160 x 2715 mm Features, accessories Bdjdpfxsuu Rwye Acysi - Chip conveyor - Coolant unit - Spindle cooler - CTS - Manuals Very good condition.It will be sold because of liquidation of production.

Condition: good (used), Year of construction: 1998, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, controller manufacturer: Okuma OSP -U 10M, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 32, Equipment: chip conveyor, Machine is well maintained and in good working order, tools included Bsdpeuqi A Hefx Acysdi

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Bsdpfx Acsxc Trcjysdi Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 0537, CNC: OSP-U100L X-axis: 1050 mm Y-axis: 560 mm Bjdpfjxlta Ejx Acysdi Z-axis: 460 mm Table size: 1300 x 560 mm Number of tool pockets: 32 Spindle taper: BT50 Max spindle speed: 12,000 rpm Spindle motor power: 15 kW Machine dimensions: H=3200 x W=3000 x L=3400 mm Machine weight: 8,000 kg.

Condition: ready for operation (used), OKUMA MB-46 VA – Vertical Machining Center For sale is a vertical machining center from the manufacturer OKUMA, model MB-46 VA, year of manufacture 2001. The machine is in excellent condition, immediately available, and ready for operation. — Technical Data • Table size: 1,530 × 660 mm • Travel range X/Y/Z: 1,500 × 660 × 660 mm • Main spindle speed: 8,000–25,000 rpm • Number of tools: 20–96 • Motor power: 11–30 kW — Equipment • Extensive accessories and tooling included — The machine is immediately ready for use. • Inspection possible at any time • Europe-wide shipping available — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to change and errors. Bodpoxk T Aqjfx Acyedi

Condition: ready for operation (used), Year of construction: 1999, Main Drive Number of axis 3 Movement X-Axis Movement 1050 mm Y-Axis Movement 560 mm Z-Axis Movement 460 mm Tools Type of tool holder BT50 This 3-axis Okuma MX-55VB was manufactured in 1999. It features BT50 tool holders and a tool measuring system. The machine has an X-axis travel of 1050 mm, Y-axis of 560 mm, and Z-axis of 460 mm. Complete documentation is available. If you are looking to get high-quality milling capabilities, consider the Okuma MX-55VB machine we have for sale. Contact us for more information about this machine. Application Types Milling Bdodpfx Ajxg Um Necyoi

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 0093, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 20 mm, feed length Y-axis: 20 mm, feed length Z-axis: 20 mm, controller model: OSP7000M, workpiece diameter (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, table width: 630 mm, spindle motor power: 28,000 W, spindle nose: BT50, number of spindles: 1, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 240 mm, tool weight: 25 g, input voltage: 200 V, type of input current: three-phase, Equipment: chip conveyor, For sale: OKUMA MX-60HB horizontal machining centre from 1997 in good condition, ideal for precision machining operations. This robust and reliable machine has been regularly maintained and is ready to be integrated into your workshop. Key features: Brand: OKUMA Model: MX-60HB Year: 1997 Type: Horizontal Machining Centre CNC Control: OKUMA OSP 7000 Bdsdpjxg Rfhjfx Acysi Capacity: Table: 630 x 630 mm Travel (X/Y/Z): 1000 / 800 / 810 mm Table load capacity: 1200 kg Spindle: Speed: 50 - 8000 rpm Power: 22 kW Tool changer: 60 tools (BT50) Machine weight: approx. 14,000 kg Included accessories: Cooling system Knoll HP 60Bar pump Chip conveyor Technical documentation Condition: Machine in good general condition Regular maintenance performed Available for inspection and testing by appointment Sold as-is, excluding transport and installation costs.

Condition: used, functionality: fully functional, Swing diameter over bed: Ø 450 mm Swing diameter over carriage: Ø 280 mm Max. swing diameter: Ø 280 mm Turning length: 450 mm Distance between centers: 450 mm Speed range: stepless variable, approx. 50 – 5000 rpm Bsdpjxg Itvefx Acyodi Turret: 1x 8 tool positions 1x 12 tool positions Tool system: VDI-30 Travels: X-axis travel: 120 + 25 mm Z-axis travel: 450 mm Rapid traverse: 12 m/min Motors & Electrical: Spindle motor: approx. 5.5 / 7.5 kW (continuous / 30 min) Total connected load: 29 kVA Power supply: 380V, 3-phase, 50 Hz Full load current: 44 A Weight & Dimensions: Machine weight: approx. 4,800 kg Dimensions (L×W×H): 2,985 × 1,720 × 1,850 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 105885, turning length: 600 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 640 mm, turning diameter over bed slide: 530 mm, TECHNICAL DETAILS Swing diameter over bed: 530 mm Swing diameter over cross slide: 380 mm Bsdpfxsxdcxzo Acyedi Distance between centers: 600 mm Max turning length: 600 mm Number of controlled axes: 4 X-Axis Travel: 260 mm Rapid traverse: 20,000 mm/min Z-Axis Travel: 640 mm Rapid traverse: 25,000 mm/min Spindle Spindle diameter: 100 mm Spindle speed: 45 – 5,000 rpm Tools External turning tools: 25 × 25 mm Internal turning tool diameter: 40 mm Tool stations: 20 Driven tools Spindle speed: 45 – 4,500 rpm C-Axis Control angle: 360° Rapid traverse: 200 rpm MACHINE DETAILS Control: OSPU 100L Dimensions & Weight Dimensions (L x W x H): 2,950 × 2,050 x 2,010 mm Operating hours Spindle hours: 30,000 h Machine hours: 86,000 h EQUIPMENT Forkardt swing chuck Chip conveyor

Condition: ready for operation (used), operating hours: 13,245 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, table load: 800 kg, spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Travel Range X: 700 mm Travel Range Y: 800 mm Travel Range Z: 700 mm Table Size: 500 mm × 500 mm Rotary Table: indexed in 1° increments, 360 positions Table Load Capacity: 800 kg Spindle Speed: 5,000 rpm Distance Spindle Nose to Table Surface: 150 mm – 850 mm Tool Holder: BT 50 Tool Magazine (ATC): 60 stations, chain magazine Maximum Tool Length: 450 mm MACHINE DETAILS Bdedpfexghcdox Acyji Control: CNC OSP U100M Dimensions & Weight Machine Weight: 21,000 kg Dimensions (L x W x H): 5,500 x 3,160 x 3,300 mm Operating Hours Spindle Hours: 13,245 h Power-On Hours: 27,372 h EQUIPMENT Chip conveyor Table-mounted Tool Presetter 2 tables with MAS bores for clamping

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * 4-axis machine. * Hydraulic and programmable tailstock. * 12-position turret, all positions live. * C-axis. Bedjxf A Ixepfx Acysdi * Y-axis. * Integrated main spindle motor, 22 kW. * Driven tools motor, 5.5 kW. * Motor starting torque 620 Nm. * Fully integrated motor, no belts or gear shifts. * Main spindle nose size A2-8. * Tailstock with Morse taper MT5. * Bar capacity 75 mm. * Kitagawa B-210 spindle chuck. * Box ways on all axes. * Main spindle speed 4,200 rpm. * Driven tool speed 4,000 rpm. * Swing diameter 520 mm. * Max turning diameter 380 mm. * Max turning length 1,050 mm. * Spindle oil chiller. * IGF OSP P200-L conversational automatic programming system. * Automatic load control and tool consumption monitor. * Parameterized automatic anti-collision system for tools. * Tool life management and monitoring. * Rapid traverse speed: 20 and 25 m/min in X and Z axes. * Turret index time 0.2 seconds. * Renishaw automatic tool setting arm. * Communication ports: USB, PCMCIA card, and RS-232. * Double foot pedal for main chuck and tailstock open/close. * Side chip conveyor, hinged type. * Extensive set of static and live tool holders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operation manual. * Weight 6,200 kg. * Machine currently in operation. * Immediate delivery unless prior sale.

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 5400 mm Measurements depth 10500 mm Machine weight 27000 kg Main Drive Spindle speed range 6000 rpm This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, it's ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine. Bjdpfx Aoxgv T Recyjdi Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Travels X-axis: 598 mm Y-axis: 230 mm Z-axis: 1,660 mm Main spindle Speed range – main spindle: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Drive power – main spindle: 37 (30) kW C-axis: 0.001° Feeds Rapid traverse X / Y: 12,000 mm/min Bdsdexb Awfepfx Acyei Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 min⁻¹ Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) Driven stations: infinitely variable Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Control: OSP 7000 L Space requirements & Weight Approx. footprint: 6.0 x 3.2 x 3.0 m Approx. machine weight: 18.5 t Electrical data Total connected load: 53 kVA Rated voltage: 400 V Number of phases: 3 P Frequency: 50 Hz EQUIPMENT Chip conveyor Central coolant system High-pressure coolant Signal lamp Hydraulic unit Steady rest Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel 44 assorted tool holders

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Bedpfxortrlzs Acyjdi Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: good (used), Year of construction: 1999, operating hours: 6,179 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, total height: 2,750 mm, total length: 4,200 mm, total width: 2,500 mm, table load: 400 kg, overall weight: 12,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 40 bar, spindle motor power: 15,000 W, Equipment: chip conveyor, rotational speed infinitely variable, OKUMA MA40 HA - 6 APC YOM1999 Cutting hours: 6,179 Operating hours: 9,352 Control powered on: 29,548 Spindle ISO40 – 12,000 rpm Power 15 kW X axis: 560 mm Y axis: 610 mm Z axis: 560 mm Bdodpjvpl Igjfx Acyji C axis: 360° continuous, 0.001°mm increment No. 6 Automatic Pallet Changer Pallet size: 400x400 mm Weight: 400 kg Machine can be seen under power in Orsago (TV), for sale due to upgrade to a larger model. Matrix magazine with 100 tool capacity and approx. 100 tool holders included. High-pressure coolant pump through spindle On-machine tool presetting The machine has always worked with steel. Regular maintenance carried out. Extremely rigid/robust machine Dismantling and loading onto truck included. Cubes not included and not for sale.

Year of construction: 2013, condition: ready for operation (used), This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Bdsdpjxc Rcrjfx Acyei Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, Movement X-Axis Movement 1500 Y-Axis Movement 660 Z-Axis Movement 660 Bdsdpfx Acexc Rdpjysi This 3-axis Okuma MB-66VB was manufactured in 2018 and features a robust vertical machining center design. It offers a large working area of 660 × 1530 mm, with X, Y, and Z travels of 1500 mm, 660 mm, and 660 mm respectively. The machine supports a load capacity of 1500 kg and achieves rapid traverse feed rates up to 40 m/min. Consider the opportunity to buy this Okuma MB-66VB vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1998, General Data Machine weight 9000 kg Control Unit Brand OKUMA Model OSP 700M Main Drive Number of axis 4 Movement X-Axis Movement 1050 mm Y-Axis Movement 560 mm Z-Axis Movement 450 mm This 4-axis Okuma MX 55 VB was manufactured in 1998. It features a CNC OSP 700M, a table size of 1300 x 560 mm, and movements of X 1050 mm, Y 560 mm, Z 450 mm. It includes ISO 50 tooling and a 4th axis. Consider the opportunity to buy this Okuma MX 55 VB vertical machining centre. Contact us for more information. Application Types Milling Bjdpjw U E Riefx Acysdi