Used Okuma Lb 300 for sale (185)

Condition: used, Year of construction: 2000, max. turning diameter 580 mm turning length 1500 mm control OSP 7000 L greates pass round over bed 610 mm swing diameter over slide rest 580 mm turning speed range - main spindle 12 - 2.800 min/-1 spindle bearing diameter 150 mm spindle bore 110 mm spindle nose JIS A2-11 power capacity - main spindel 37 (30) kW C-Axis 0,001 ° x-axis 598 mm y-axis 230 mm z-axis 1.660 mm rapid traverse X / Y: 12.000 mm/min rapid traverse Z: 20.000 mm/min Crsdpfx Abexmaf Ro Tjk rapid traverse C: 100 min/-1 cutting feed speed X / Z / Y: 0,001 - 1.000 mm/U type H2 ATC number of toolpositions 2 (1x L-Tool / 1x M-Tool) pos. driven statition stufenlos / stepless Spindle speed - driven tool stations 40 - 3.000 min -1 tool shank height 25 mm Boring bar shank diameter 50 mm diameter of quill 120 mm quill stroke 170 mm taper of center MT 5 number of toolpositions 50 pos. tool taper MAS BT 50 max. tool diameter 170 mm max. tool length 350 mm max. tool weight 20 kg drive of magazin 3,2 kW total power requirement 53 kVA weight of the machine ca. 18,5 t dimensions of the machine ca. 6,0 x 3,2 x 3,0 m CNC - Turning- and MillingCenter OKUMA - MacTurn 50

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0014, turning length: 1,500 mm, turning diameter over cross slide: 610 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel Distances X-axis travel: 598 mm Y-axis travel: 230 mm Z-axis travel: 1,660 mm C-axis: 0.001 Turning Length: 1,500 mm Swing diameter over cross slide: 610 mm Swing diameter: 580 mm Spindle Crsdjxqyikjpfx Ab Tsk Spindle motor power: 30,000 W Spindle speed (min.): 14 rpm Spindle speed (max.): 3,200 rpm Spindle bore: 90 mm Spindle bearing diameter: 130 mm Spindle nose: JIS A2-11 Rapid Traverse Rapid traverse (Z-axis): 20 m/min Rapid traverse (X/Y): 12,000 mm/min Rapid traverse (C): 100 min^-1 Cutting feed rate X/Z/Y: 0.001 - 1,000 mm/rev Tools Tool magazine positions: 32 pos. Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Turret type: H2 ATC Tool stations: 2 (1x L-Tool / 1x M-Tool) Driven tool stations: stepless Spindle speed – driven tool stations: 40 - 3,000 rpm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Centre taper: MT 5 MACHINE DETAILS CNC Control: OSP 7000L Total power requirement: 53 kVA Dimensions & Weight Dimensions (L x W x H): 5.3 x 3.2 x 3.0 m Machine weight: 18,500 kg EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand OKUMA Model OSP-7000M Main Drive Number of axis 4 Additional Equipment 4 pallets with tombstone This 4-axis Okuma MX-60HB horizontal machining center was manufactured in 1998. It features a BT 50, a 60-tool automatic tool changer, and 4 pallets with tombstone, enhancing productivity and versatility. Consider the opportunity to buy this Okuma MX-60HB horizontal machining center. Contact us for more information. Application Types Milling Crjdpjxl H E Isfx Ab Tek

Condition: used, Year of construction: 1990, Used 20 mm Cold Forming Machine Manufacturer: Asahi-Okuma (Japan) Year of manufacture: 1990 Model: AF-2020-5 Station No.: 5 Cutting diameter: Max. 20 mm (tensile strength below 70 kg/mm²) Cutting length: 210-15 mm Projection length: Punch side projection: Max. 52 mm Main die x depth: 115 mm diameter x 250 mm Codpjxlac Hsfx Ab Tsrk Punch die x depth: 85 mm diameter x 150 mm Cutting die x depth: 80 mm diameter x 80 mm Ejector die diameter: 30 mm diameter Cutting die diameter x thickness: 80 mm x 40 mm Die center distance: 140 mm Crank stroke: 380 mm Transfer stage length: 210 mm Head piece net diameter: 45 mm diameter. Punch net diameter: 100 mm diameter. Force: 250 tons Production capacity: 100 units/min (max.) Main motor: 75 kW (6/8/12 poles) Machine weight: 75 tons Machine dimensions: 9.1 x 3.45 m

Year of construction: 2001, condition: ready for operation (used), A CNC lathe Okuma Soarer L270E is offered. Turning length: 500mm, turning diameter over bed: 530mm, max. spindle speed: 4200rpm, machine dimensions X/Y/Z: approx. 2800mm/1850mm/2000mm, weight: approx. 3700kg, control: OSP-U10L. Functional, spindle may need to be replaced. An on-site inspection is possible by appointment. Credpfxjxph Sqs Ab Tok

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller OKUMA OSP P200-M Table size 1000 x 460 mm Table load 700 kgs X travel 762 mm Y travel 460 mm Z travel 460 mm Spindle speed 15000 rpm Csdpfouu Rwyox Ab Tsrk Tool holder type MAS BT40 ATC magazin 20-fold Weight 6500 kgs Dimensions LxWxH = 2750 x 2160 x 2715 mm Features, accessories - Chip conveyor - Coolant unit - Spindle cooler - CTS - Manuals Very good condition.It will be sold because of liquidation of production.

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Cjdpfx Abjxmirge Tjrk Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Condition: good (used), Year of construction: 2010, functionality: fully functional, Manufacturer: Okuma Model: Multus B300-W CNC: OSP-P200L Year of manufacture: 2010 X-axis: 580 mm Z-axis: 935 mm Y-axis: 160 mm Crodpfx Aexmg Sqeb Tsk C-axis: 360° (0.0001°) B-axis: H1 ATC turret, HSK 63, 6000 rpm, PREX 11/7.5 kW Spindle speed: 38–5000 rpm 40-position ATC Machine weight: 9982 kg Machine dimensions: L=4368.8 x W=2032 x H=2590.8 mm

Year of construction: 1997, condition: ready for operation (used), Control Unit Brand OKUMA Model OSP7000L Main Drive Number of axis 4 This 4-axis Okuma LU2-M was manufactured in 1997. It features a turning length of 1500 mm, ideal for horizontal turning machine applications. Consider the opportunity to buy this Okuma LU2-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning Crjdpjxl H Hlsfx Ab Tsk

Condition: good (used), Year of construction: 1998, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, controller manufacturer: Okuma OSP -U 10M, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 32, Equipment: chip conveyor, Machine is well maintained and in good working order, tools included Crjdpsuqi A Hefx Ab Tsk

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 0093, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 20 mm, feed length Y-axis: 20 mm, feed length Z-axis: 20 mm, controller model: OSP7000M, workpiece diameter (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, table width: 630 mm, spindle motor power: 28,000 W, spindle nose: BT50, number of spindles: 1, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 240 mm, tool weight: 25 g, input voltage: 200 V, type of input current: three-phase, Equipment: chip conveyor, For sale: OKUMA MX-60HB horizontal machining centre from 1997 in good condition, ideal for precision machining operations. This robust and reliable machine has been regularly maintained and is ready to be integrated into your workshop. Key features: Brand: OKUMA Model: MX-60HB Year: 1997 Type: Horizontal Machining Centre CNC Control: OKUMA OSP 7000 Capacity: Table: 630 x 630 mm Travel (X/Y/Z): 1000 / 800 / 810 mm Table load capacity: 1200 kg Spindle: Speed: 50 - 8000 rpm Power: 22 kW Tool changer: 60 tools (BT50) Machine weight: approx. 14,000 kg Included accessories: Cooling system Knoll HP 60Bar pump Chip conveyor Crjdpfx Asxg Rfhjb Tjk Technical documentation Condition: Machine in good general condition Regular maintenance performed Available for inspection and testing by appointment Sold as-is, excluding transport and installation costs.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Travels X-axis: 598 mm Y-axis: 230 mm Z-axis: 1,660 mm Main spindle Speed range – main spindle: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Drive power – main spindle: 37 (30) kW C-axis: 0.001° Feeds Rapid traverse X / Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 min⁻¹ Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) Driven stations: infinitely variable Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Control: OSP 7000 L Space requirements & Weight Crsdpfxjxb Awfe Ab Tok Approx. footprint: 6.0 x 3.2 x 3.0 m Approx. machine weight: 18.5 t Electrical data Total connected load: 53 kVA Rated voltage: 400 V Number of phases: 3 P Frequency: 50 Hz EQUIPMENT Chip conveyor Central coolant system High-pressure coolant Signal lamp Hydraulic unit Steady rest Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel 44 assorted tool holders

Condition: ready for operation (used), operating hours: 13,245 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, table load: 800 kg, spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Travel Range X: 700 mm Travel Range Y: 800 mm Travel Range Z: 700 mm Table Size: 500 mm × 500 mm Rotary Table: indexed in 1° increments, 360 positions Table Load Capacity: 800 kg Spindle Speed: 5,000 rpm Distance Spindle Nose to Table Surface: 150 mm – 850 mm Tool Holder: BT 50 Tool Magazine (ATC): 60 stations, chain magazine Maximum Tool Length: 450 mm MACHINE DETAILS Control: CNC OSP U100M Dimensions & Weight Machine Weight: 21,000 kg Dimensions (L x W x H): 5,500 x 3,160 x 3,300 mm Operating Hours Spindle Hours: 13,245 h Power-On Hours: 27,372 h Cedpfx Abjxghcds Tork EQUIPMENT Chip conveyor Table-mounted Tool Presetter 2 tables with MAS bores for clamping

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 0537, CNC: OSP-U100L X-axis: 1050 mm Y-axis: 560 mm Z-axis: 460 mm Table size: 1300 x 560 mm Number of tool pockets: 32 Credpfx Aexlta Eeb Tsk Spindle taper: BT50 Max spindle speed: 12,000 rpm Spindle motor power: 15 kW Machine dimensions: H=3200 x W=3000 x L=3400 mm Machine weight: 8,000 kg.

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 5400 mm Credpfx Abjxgv T Rj Tsk Measurements depth 10500 mm Machine weight 27000 kg Main Drive Spindle speed range 6000 rpm This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, it's ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Cjdortrlzjpfx Ab Terk Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: used, Year of construction: 2001, No. of controlled axes: 8 Swing over bed (mm): 650 Swing over carriage (mm): 250 Distance between centers (mm/in): Max. 1450 / 57.08, Min. 310 / 12.20 Max. turning diameter × length (mm/in): Ø300 × 300 / Ø11.81 × 11.81 SPINDLE Spindle nose taper: JIS A2-11 Spindle diameter (mm): 120 Spindle hole (mm): 80 Spindle speed range (min⁻¹ / rpm): 38 – 3800 Number of spindle speed ranges: 2 Crjdpfsw N Nqvox Ab Tjk Please see photos of specs. Includes all parts and tools in pallets.

Condition: used, Year of construction: 2002, operating hours: 10,500 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: Okuma, controller model: U100, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MB46 from 2002 few operating hours! Machine can be inspected under power. 32 tools BT40 Cjdpswt Dqaofx Ab Terk Scraper conveyor Internal cooling 4th axis included

Condition: good (used), Year of construction: 2006, Used OKUMA lathe - Model: LT200-M TwinStar - Year of manufacture 2006 Cedpsv S Su Ssfx Ab Tork - Includes bar magazine - Includes chip conveyor

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1067, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 28 kVA, torque: 80 Nm, controller manufacturer: Okuma, controller model: OSP-U100L, workpiece height (max.): 500 mm, workpiece weight (max.): 700 kg, table width: 560 mm, table length: 1,300 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 15,000 h, coolant supply: 20 bar, spindle nose: BT-40, number of slots in tool magazine: 20, mount diameter: 40 mm, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, 3-axis machining center with internal cooling through the spindle, 15,000 rpm, permanent oil cooling of the spindle. Various tool holders (collets, drill chucks, Weldon holders, and milling head holders). 3 Gressel-Gripos 125 mm vises as new, additionally tool presetting device PWB Toolmaster 250. Cjdpsw S Nc Rsfx Ab Tork

Year of construction: 2013, condition: ready for operation (used), This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Application Types Milling Credpfxjxc Rcrs Ab Tek

Condition: used, Year of construction: 2001, functionality: fully functional, OKUMA CNC lathe TL10-M in working condition ATTENTION, WITHOUT THE MIST DUST COLLECTOR! Codpsw Swp Ejfx Ab Terk Specifications: - Year of manufacture: 2001 - Control: Okuma OSP-U100L - Chip conveyor - Including several tools Main spindle: - Bar capacity: 50mm - Spindle bore: 53mm - Max. swing over bed: 400mm - Max. turning diameter: 210mm - Turning length: 130mm - Spindle speed: 6000rpm Sub spindle: - Bar capacity: 50mm - Spindle speed: 6000rpm Turrets: - Number of turrets: 2 - Number of stations: 12 - Number of powered stations: 12 - X-stroke: 195mm - Z-stroke: 700mm Accessories: - Mist dust collector not included!!! - CTS (coolant through spindle) in both turrets - Live tooling in both turrets - Chip conveyor - 2 x chuck 200mm - Several tool holders: 11 x single tool holder 20x20 2 x double tool holder 20x20 2 x top tool holder 20x20 2 x round tool holder 16 16 x round tool holder 25 4 x live tool holder radial 4 x live tool holder axial - Coolant installation - Machine manuals

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year of manufacture 2007 - Includes loading robot and loading carousel - Includes chip conveyor - Coolant tank - Available immediately Crsdjv S Svvjpfx Ab Tek

Condition: ready for operation (used), Year of construction: 2018, Movement X-Axis Movement 1500 Y-Axis Movement 660 Z-Axis Movement 660 This 3-axis Okuma MB-66VB was manufactured in 2018 and features a robust vertical machining center design. It offers a large working area of 660 × 1530 mm, with X, Y, and Z travels of 1500 mm, 660 mm, and 660 mm respectively. The machine supports a load capacity of 1500 kg and achieves rapid traverse feed rates up to 40 m/min. Consider the opportunity to buy this Okuma MB-66VB vertical machining center. Contact us for more information about this machine. Codsxc Rdpspfx Ab Terk Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand OKUMA Main Drive Spindle speed range 8000 rpm Tool taper BT40 Crsdpfxew Ul Egj Ab Tok Number of axis 4 Movement X-Axis Movement 560 Y-Axis Movement 560 Z-Axis Movement 600 Additional Equipment Tool change gearbox has a defect This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2008. It offers robust construction and precision for demanding machining tasks. If you are looking to get high-quality milling capabilities, consider the Okuma MA-400HA machine we have for sale. Contact us for more information. Application Types Milling