Okuma MA-600 HB

Okuma MA-600 HB

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, controller model: OSP E100M, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, total height: 3,280 mm, total length: 6,495 mm, total width: 3,460 mm, table width: 630 mm, table length: 630 mm, overall weight: 26,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, number of slots in tool magazine: 60, Equipment: chip conveyor, We are pleased to offer this very well-maintained Okuma MA-600HB horizontal machining centre. The machine was manufactured in 2004 and is fitted with the OSP E100M control system. Lodpfx Aoz Tq Tkslbsah Technical specifications: Pallet table size: 630 x 630 mm Number of pallets: 2 Table load: 1200 kg Movement X-axis: 1000 mm Movement Y-axis : 950 mm Movement Z-axis : 1000 mm Table indexing: 360 x1 ° Spindle Taper: MAS BT50 Spindle speed: 12.000 1/min Spindle motor: 37/26 kW Magazin capacity: 60 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you.

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, workpiece weight (max.): 3,000 kg, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, tool weight: 27,000 g, We offer in good condition DMG Mori NHX8000 from 2015 with following options: 30/25 KW 15.000 RPM Spindle SK50 Mapps 4S Control 60 tool ATC Lajdpfx Aezlqw Islbsh 800x800 pallet 3.000 kg max table load Signal light 40 bar Internal coolant Touch probe Machine will be in stock in 2 weeks

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller model: OKUMA OSP P200M, total height: 3,150 mm, total length: 6,500 mm, total width: 3,000 mm, table width: 630 mm, table length: 630 mm, rotational speed (max.): 6,000 rpm, overall weight: 22,500 kg, spindle speed (min.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Okuma MA series is a horizontal machining center with large travels for heavy-duty machining. The X/Y/Z travels are 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm. - OSP P200M - Year of manufacture: 2008 - Cutting time: 17,500 h Lasdpfeyg Rb Rjx Alboh - Renishaw Tool Eye - ATC 150 SK50 - 2-pallet system - Spindle speed: 6,000 RPM - B-axis NCB 0.001 degree - X/Y/Z 1000/900/1000 mm - Mayfran Consept coolant system with chip conveyor and high-pressure pump 60 bar

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Lajdeywicvspfx Albjh

Condition: used, Year of construction: 2014, Technical details: x-travel: 760 mm y-travel: 760 mm z-travel: 760 mm b-axis: 360.000 x 0.001 ° spindle drive: 26 / 18,5 (40% / 100%) kW spindle turning speed range: 50 - 15000 U/min Lsdpfx Aexrwpdelbjah Tool bore: KSK-A63 max. table loading capacity: 500 kg total power requirement: 43 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Max. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools 1 spindle 4 axes 10-pallet system We have 2 units available. Price is per unit, ex location. Lsdpfjyrf I Aox Albeah

Condition: ready for operation (used), Year of construction: 2006, operating hours: 31,900 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OKUMA, controller model: OSP-200M, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis Okuma MA-600HB was manufactured in 2006. It features a maximum spindle speed of 12,000 RPM and a BT50 tool holder. The machine is equipped with a coolant system in the spindle at 30 bar and includes a Renishaw MP10 for tool measurement. If you are looking to get high-quality machining capabilities, consider the Okuma MA-600HB horizontal machining centre we have for sale. Contact us for further details. • Coolant through spindle: 30 bar • Tool breakage detection • MOP-Tool • DNC-DT Additional equipment • NC table 0,001 (NC rotary/indexing table) • Renishaw MP10 probe • Mayfran MT10 (chip conveyor/coolant handling) Technical Specification Taper Size BT 50 Ljdpfxjzx D Dze Albeah

Condition: good (used), 3 machine vices Goody. Laedpfxorai Akj Albsh

Condition: ready for operation (used), Year of construction: 2007, operating hours: 21,500 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OKUMA, controller model: OSP-200M, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 150, number of axes: 4, This 4-axis Okuma MA-600HB was manufactured in 2007. It features a maximum spindle speed of 6000 RPM and a robust tool capacity of 150 tools in the automatic tool changer. The machine is equipped with a 30 bar coolant system and includes advanced features such as tool breakage control and DNC DT. If you are looking to get high-quality machining capabilities, consider the Okuma MA-600HB horizontal machining centre we have for sale. Contact us for further details. Laedpfxozx Dypo Albeh • Spindle: 30 bar through-spindle coolant • Control/Options: DNC/DT, MOP-Tool • Functions: Tool breakage control, Tool length offset Additional equipment • Renishaw MP10 probe • Robot interface type E • Mayfran MT10 chip conveyor

Condition: used, Year of construction: 2006, Okuma Space Centre MA-600HB Horizontal Twin Pallet Machining Centre with Okuma OSP-P200M CNC Control System. Serial No. 1296158 (2006), X Axis = 1,000mm, Y Axis = 900mm, Z Axis 1,000mm, Spindle Nose NT 50, Spindle Speed Std 6,000rpm, Spindle Drive VAC 30/22kw, Pallet Size 630 x 630mm, Max Weight on Pallet 1200kg, Pallet Indexing 1 deg, Pallet Change Time 11 seconds, Max Work Piece Size Ø 1,000 x 900 High, Axis Drives Feed Rate X, Y, Z Axis 1 - 60,000mm/min, Rapid Traverse X, Y, Z Axis 60,000mm/Min, Automatic Toolchanger No. of Tools 40, Floor Space 3,380 x 6,140mm, Machine Weight 24,000kg Approx. Qty of 50 INT Spindle Tools (Back End Only). Country of Origin: Japan Lasdoz Arzvepfx Alboh Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New unit, in stock, immediately available -Volume 18,000 liters -Maximum temperature 350°C -Internal dimensions L x W x H 4100 x 2100 x 2100 mm -External dimensions (with rails) L 9970 x W 3060 x H (with lift-up door) 6110 mm -Control system Eurotherm Nanodac -Temperature stability (at rated temperature without load) ±5°C -Automatic inlet and outlet air dampers -Electric lift-up door -Electrically driven hearth carriage -Power 247 ± 9% kW -400 V, 50 Hz -Documentation, CE declaration We would be pleased to offer installation and commissioning, as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enamelling furnace, drying oven, industrial furnace, heating chamber, heating oven, temperature oven, drying cabinet, chamber furnace, large-volume furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln. Ljdpfsu Hma Nsx Alboah

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,000 mm, controller manufacturer: OKUMA, controller model: OSP E-100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, number of axes: 4, This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. The machine have room for 320 tools in ATC, preparation for Fastems and Concept2000 conveyor. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Additional equipment • Balluf read/write • Renishaw MP10 • 30 Bar coolant • Mayfran Consept 2000 Machine Benefits Technical Machine Benefits Ledpfxszr Ny Uj Albjah • Nc table (0. 001-degree accuracy) • Atc with 320 places (80 places for 600 mm tools) • Tool breakage control • Mop tool control Extra Information Machine still under power Technical Specification Taper Size BT 50 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2005, operating hours: 44,673 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller model: OSP-E100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,000 mm Travel range Y-axis: 900 mm Travel range Z-axis: 900 mm Spindle speed: 12,000 rpm Tool holder: BT50 Tool positions: 320 Tool positions for 600-mm tools: 80 Part accuracy: 0.001° MACHINE DETAILS Control system: OSP-E100M Number of axes: 4 Coolant pressure: 30 bar Dimensions & Weight Machine: 4800 x 2980 x 3150 – 21.5 t Tool magazine: 4500 x 2800 x 3150 - 6–7 t Chip conveyor: 4500 x 1600 x 2400 – 2 t, including high-pressure pump Repo: 3000 x 1200 x 1500 mm, 0–0.5 t Operating hours NC cycle time: 71,235 h Spindle running time: 56,241 h Machining time: 44,673 h EQUIPMENT ATC with 320 positions 80 positions for 600-mm tools 2 pallets Balluff read/write system NC table Absolute scales in X, Y, and Z Laodszlg U Aopfx Albjh Renishaw MP10 measuring probe Tool breakage detection MOP tool monitoring 30-bar coolant system Mayfran Consep 2000 chip conveyor

Condition: used, Year of construction: 2016, x-travel 800 mm y-travel 1020 mm z-travel 1020 mm Control SIN840D sl B - axis 360 x 0,001 ° A - axis -185 / +45 x 0,001 ° feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206 / 159 Nm spindle diameter in front bearing 70 mm tool taper HSK-A63 tool magazin: 272 tool length - max. 400 / 465 mm tool diameter 68 mm tool diameter with 2 vacant positions 160 mm tool total weight 8,00 kg Chip to chip time 4,2 sec. size of pallet 630x630 mm workpiece weight 700 kg interference diameter 900 mm total power requirement 50,00 kW weight of the machine ca. 32,00 t dimensions of the machine ca. 10,00 x 6,00 x H3,50 m 5-axis machining center with SIEMENS Sinumerik 840D SL control, Lasdpfxezy Saae Albsh integrated KNOLL coolant, coolant through the spindle, chip conveyor, RENISHAW measuring probe, BLUM-Laser, GROB Spindle-diagnosis (GSD) Additional Tool-Magazine TM218, Pallett-Storage PSS630-R13-12

Condition: used, Year of construction: 2003, operating hours: 23,000 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller model: OSP-E100M, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time by the end of week 26 of 2026! TECHNICAL DETAILS Travel in X-axis: 1,000 mm Travel in Y-axis: 950 mm Travel in Z-axis: 1,000 mm Lodpezbamfofx Alboah Main spindle speed: 12,000 rpm Table width: 630 mm Table height: 630 mm NCB B-axis: 0.001 degrees MACHINE DETAILS Control system: OSP-E100M Dimensions (L x W x H): 6,500 x 3,460 x 3,280 mm Operating hours: approx. 23,000 h EQUIPMENT 2 APC pallet changing systems 100 ATC tool changer SK50 with tool ID Coolant system Mayfran Consept Renishaw preparation (receiver) Tool breakage monitoring installed in the magazine (special development) An optional tool package with 230 tools is available for the machine for €5,000. The seller can offer dismantling, transport securing, removal and loading for an additional charge of €7,850.