Used Molding Machine for sale (83,909)

Condition: like new (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, total length: 4,110 mm, total width: 2,650 mm, total height: 4,565 mm, overall weight: 22,000 kg, The nearly new used ARBURG Allrounder T offered here, with a clamping force of 2000 kN, features a 2-station rotary table that alternates 180° forward/back. With only 8,344 operating hours, the machine is in excellent condition. Nljdexx R Iaopfx Afroi

Condition: good (used), Year of construction: 2006, operating hours: 58,401 h, machine/vehicle number: 61007671, Technical details Clamping force: 4200 kN Size of mould platens (H x V): 800 mm x 800 mm Mould opening stroke: 1020 mm Minimum mould height: 380 mm Maximum mould height: 1400 mm Max daylight: 1380 mm Hydraulic ejector – stroke: 250 mm Ejector force forward/backward: 95 kN Injection unit Screw diameter: 80 mm Injection pressure: 1829 bar Nsdpfx Afjxzdqaereli Stroke volume: 1433 ccm Shot weight PS: 513 g Screw speed: 218 1/min Maximum plasticising rate: 108 g/sec

Condition: excellent (used), Year of construction: 2014, operating hours: 30,364 h, functionality: fully functional, machine/vehicle number: 228263, clamping force: 400 kN, screw diameter: 25 mm, Here we offer, as a specialist dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax Information and Benefit for Used Machines Starting July 1, 2025, used machines can also be written off for tax purposes with a special depreciation rate of 30% per year. In addition to the lower price compared to new equipment, you can claim the same depreciation amounts as with a new machine. Keyword: Growth Booster (§ 7 section 2 EStG-E) Manufacturer: Arburg Model: 270C 400-100 e² Golden Edition Year of manufacture: 2014 Controller: Selogica Operating hours: approx. 30,364 h Clamping Unit Clamping force: 40 t / 400 kN Tie bar distance: 320 x 320 mm Platen size: 446 x 446 mm Ejector stroke: 125 mm max. / 30 kN Opening stroke: 350 mm Mould installation height: 200 mm Distance between platens: 550 mm Injection Unit Screw diameter: 25 mm Injection volume: 49 cm³ Shot weight: 45 g/PS Injection pressure: 2000 bar Extras Highly wear-resistant plasticising screw Euromap 67 robot interface Interface for colour dosing unit Bolt pattern for through-bolts (ideal for older tools from 220/2270 series) Weight / Dimensions Weight: 2300 kg Dimensions: 3.41 x 1.43 x 1.90 m (L x W x H) - Immediately available from our Hanover warehouse, ex works or delivered free domicile for a shipping fee - Function tested / new photos available in 10 days Available immediately from our Hanover/Germany warehouse or delivered free domicile for a shipping fee. The machine is offered function tested. Nedexx Dq Uepfx Afrjli The machine is exclusively owned by us. The requested machine is available immediately in our Hanover warehouse, is offered function tested, and can be inspected under power. Information about the machines we offer and our company: - We only sell machines from our own stock, acquired from active production, from our Hanover warehouse - All offered machines are inspected and tested before dismantling - We DO NOT sell insolvency assets – we are NOT brokers handling third-party property - All machines originate from successful companies where maintenance and care are standard - All offered machines can be inspected at our warehouse

Condition: used, Year of construction: 2001, Technical details: screw size: 105 mm injection shot weight in Polysterol: 4.940 g/PS closing pressure: 9000 kN weight of the machine ca.: 19 t Out of serial production Machine and Robot condition regularly checked by EngelCare program Nedpfxstuncvo Afrsli Linear robot on machine was fully refurbished in 2021 *

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 193818, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, injection pressure: 2,080 bar, injection weight: 297 g, ejector stroke: 225 mm, opening stroke: 650 mm, plate width: 685 mm, plate height: 685 mm, installation height: 250 mm, total length: 5,500 mm, total width: 1,600 mm, total height: 2,160 mm, overall weight: 6,630 kg, number of injections: 1, input current: 125 A, Equipment: documentation/manual, All items are sold as used and untested unless otherwise specified. Only the injection moulding machine is offered for sale, without handling device or accessories. Please pay attention to the item description. Nlodsxy Iugjpfx Afrsi

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, clamping force: 350 kN, screw diameter: 28 mm, injection pressure: 1,577 bar, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this high precision BOY 35M injection moulding machine. The 30 & 35 machines are a rare find on the used market as they offer a versatile four tie bar setup with good platen areas, from a footprint not much larger than that of a BOY 22. If you’re looking for the most versatile little machine, this has to be worthy of consideration. Fitted with the Procan MD controller and 28mm diameter screw, which gives a shot weight of 55.8 (PS)g. Nledpfxjxxlmdo Afrji Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: good (used), Year of construction: 2004, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 80 mm, injection pressure: 2,500 bar, For sale: Injection moulding machine Arburg 820S 4000-2100, serial no. 195746. The item is in good condition. Technical specifications: Year of manufacture: 2004 Injection unit: 2100 Screw diameter: 80 mm Shot volume: 1407 cm³ Clamping force: 4000 kN Tie bar spacing: 820×820 mm Platen size: 1171×1171 mm Maximum mould height: 850 mm Maximum opening stroke: 700 mm Maximum distance between platens: 1550 mm Ejector force: 100 kN Ejector stroke: 250 mm Maximum weight of moving mould half: 4500 kg Hydraulic pump drive power: approx. 55 kW Total installed power: approx. 88.9–96.2 kW Number of heating zones: 6 + nozzles Net weight of machine: 22,700 kg Dimensions (L × W × H): approx. 8.0 × 2.3 m Control system: SELOGICA Machine cycles: 4,157,591 Pump hours: 69,800 Auto mode: 58,556 Transport and loading can be organised Europe-wide on request, at an additional cost. Prices excl. VAT Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine purchase & sale Nlodpfx Afexxi Nvjrsi BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing business? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2004, operating hours: 29,461 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, injection weight: 140 g, For sale: a well-maintained Arburg 570C-2000-350 2K injection moulding machine from 2004, with only approximately 30,000 operating hours. The machine is in good technical condition and is immediately ready for production. Specifications: Model: Arburg 570C Clamping force: 2000 kN Screw diameter: 35 mm (350) Year of manufacture: 2004 Operating hours: approx. 30,000 Njdpfx Aexyyxqofroli Control system: Arburg Selogica Configuration: Standard injection moulding setup, reliable and versatile Condition & Maintenance Machine always serviced as per schedule No significant fault history Clean and fully functioning hydraulic and electrical system Extras (optional) Other screw sizes available.

Condition: new, Year of construction: 2021, operating hours: 864 h, functionality: fully functional, clamping force: 10,000 kN, screw diameter: 14 mm, opening stroke: 350 mm, heating capacity: 1.4 kW (1.90 HP), power: 4 kW (5.44 HP), input voltage: 380 V, DR BOY XS 5000H VIS 14 OPTIONS: INTEGRATED MANIPULATOR OPENING + 50MM Nlodpfx Afjxmfq Eorji

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, clamping force: 1,800 kN, Battenfeld HM 180 /525H/60V Clamping force: 180 t Year of manufacture: 2009 Injection weight: 175/20.8 g Injection unit .../525/....60 Screw diameter 35/18 mm Nedpfxjxyw Eue Afrjli Specific injection pressure 2743/2593 bar Injection volume 193/22.9 ccm Injection weight 175/20.8 g Screw L/D ratio 22/20 Mould clamping unit 180/... Clamping force 180 t Space between tie bars 570 x 520 mm Mould height 305 mm Ejector stroke 200 mm Year of manufacture 2009 Equipment: - Servo-driven rotary table - 3 x hydraulic core pull

Condition: excellent (used), Year of construction: 2016, operating hours: 33,500 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 30 mm, clearance between the columns: 370 mm, column diameter: 35 mm, displacement volume: 144 cm³, Equipment: documentation/manual, Plasticizing cylinder assembly 35 mm (without nozzle) in highly wear-resistant version Servo-controlled, programmable nozzle unit for injection unit 1 Highly accurate and reproducible mold positioning through electromechanical servo drive Hydraulic core pull control for simultaneous, regulated movements; for both sequential and simultaneous movements, pressure and flow are programmable. Connections located on the moving platen. Electromechanical, position-controlled ejector Blow-off device 1 with pressure regulator Electric mold height adjustment for adaptation to different minimum mold heights, adjustment range directly programmable via SELOGICA control Electric, programmable conveyor belt Sorting unit for separating good and reject parts during production, installed longitudinally below the clamping area "Extended Monitoring" equipment package: Expansion of mechanical process monitoring for mold and machine for complex applications "Extended Movement Functions" equipment package: Increased number of movement steps and intermediate stop functions Freely configurable page for "Startup Parameters" to allow a selectable number of cycles to run with parameters different from the production parameters. Additional socket combination, with 1 Schuko and 1 x CEE via automatic cutoff (1 standard included, max. 1 additional possible) Extended mold protection 6 electric heating control circuits for mold heating, each max. 2 kW / 230 V Nledpfx Afexywxujrei Interface for a coloring/dosing unit (volt-free contact) "Quality Assurance" equipment package Tie-bar extension +100mm for mold installation height Integral picker Machine is sold without material feed and peripheral devices.

Condition: excellent (used), Price: €50,000 Package Nedpfoxw U Uhsx Afreli 11 ARBURG injection moulding machines Models - Allrounder: 270-S-500-60 270-M-500-90 270-S-400-70 221S-350-100 370S-500-100 370S-700-70

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine. complete maintenance by manufacturer until current Injection molding machine: Manufacturer / Type: Krauss-Maffei KM80 220 C2 Serial No.: 61006272 year of construction: 2004 Control system: MC4 Clamping unit clamping force: 800 kN /80 tons tie bar distance: 405 x 405 mm Mold installation height min.: 250 mm platen distance max.: 750 mm Clamping platens standard: 610 x 610 mm ejector stroke: 150 mm core pull: 1x pcs. Nlsdpfx Aoh Dr E Tofrei Injection unit Injection unit / cylinder ø30 mm Shot weight max. (ø30):: 77g/hp Injection flow: 73cm³/sec Spec. injection pressure: 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & Weights Weight with control cabinet: 3,8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: excellent (used), Year of construction: 2005, Arburg 720 S 3200-2100 Injection Moulding Machine Year of manufacture: 2005 Machine in very good technical condition, fully operational, ready for immediate use in an industrial facility. Clamping force factory increased by Arburg to 3600 kN. Clamping unit Clamping force: 3600 kN Platen dimensions (H × W): 1040 × 1040 mm Tie bar spacing (H × W): 720 × 720 mm Minimum / maximum mould height: 300 mm Maximum opening stroke: 1400 mm Injection unit Nsdpoxyq H Esfx Afreli Screw diameter: 70 mm Injection volume: 1078 cm³ Shot weight: 984 g Injection pressure: 2000 bar Electrical-hydraulic equipment Pump motor rated power: 55 kW Heater power: 30.3 kW Dimensions & weight Net weight with control cabinet: 17 t

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Nljdpfjxywgxsx Afrji Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Year of construction: 2015, Stork S+ 6600-5650 Injection Moulding Machine Control System: CDS700 Year of Manufacture: 2015 The machine is in very good technical condition, fully operational, and ready for immediate use in an industrial facility. The injection unit was overhauled a year ago – including a new barrel, screw, and screw tip. Clamping Unit Clamping force: 6,600 kN Dimensions of mounting plates (H × W): 1,370 × 1,370 mm Tie bar clearance (H × W): 900 × 900 mm Minimum / maximum mold height: 400 – 1,125 mm Maximum opening stroke: 2,065 mm Centering ring diameter: 200 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 84 mm Injection volume: 2,575 cm³ Shot weight (PS): 2,369 g Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s Nljdpfx Afexyqy Eeroi Additional Equipment Pneumatic valves – 4 pcs Core pull – 1 pc Injection system overhauled: new barrel, screw, and screw tip (one year ago) The machine is available for inspection and testing under power. Photos and videos of machine operation can be provided upon request. Loading and transport can be organized.

Condition: excellent (used), Year of construction: 2011, clamping force: 1,300 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, injection weight: 289 g, mold height (min.): 300 mm, General Information Model: Krauss Maffei KM 130/750 CX Year of manufacture: 2011 Control system: MC5 Machine weight: 6,200 kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m ⚙️ Injection Unit Unit: .../750 Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 289.4 g Specific injection pressure: 2,336 bar Nlsdpfxjxywfue Afrji Screw L/D ratio: 22.4 🔩 Clamping Unit Clamping unit: 130/... Clamping force: 130 t Platen dimensions: 745 × 770 mm Distance between tie bars: 470 × 470 mm Min. mould height: 300 mm Opening stroke: 600 mm Max. distance between platens: 900 mm Ejector force: 22.6 kN Ejector stroke: 150 mm 🧰 Additional Equipment Hydraulic core Pneumatic valve 4-section rotameters (2 pcs.)

Condition: excellent (used), Year of construction: 2011, Injection Moulding Machine Stork S+ 9000-12550 Control system: CDS700 Year of manufacture: 2011 The machine is in very good technical condition, fully operational and ready for immediate use in an industrial environment. Clamping Unit Clamping force: 9000 kN Platen dimensions (H × W): 1570 × 1560 mm Tie bar clearance (H × W): 1010 × 1010 mm Minimum / maximum mould height: 300 – 1190 mm Maximum opening stroke: 2290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 115 mm Injection volume: 6232 cm³ Shot weight (PS): 5733 g Injection pressure: 1740 bar Maximum injection speed: 300 mm/s Additional Equipment Nsdsxyqyxjpfx Afreli Pneumatic valves – 6 pcs Core – 1 pc The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2017, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,103 g, mold height (min.): 380 mm, Demag Systec 420/820-2300 (Servo) Year of manufacture: 2017 Weight: 21,000 kg Dimensions (L × W × H): 8.0 × 2.3 × 2.6 m Control system: NC5 Nlsdpfoxywd Dox Afrji Operating hours: 10,800 h Clamping unit type: 420/... Clamping force: 420 t Platen size (H × V): 1200 × 1200 mm Tie bar spacing (H × V): 820 × 820 mm Mold height (min.–max.): 380 – 1050 mm (increased by 225 mm) Maximum distance between platens: 1050 mm Opening stroke: – Ejector stroke: 230 mm Ejector force: 96 kN Knee lever mechanism with central oil lubrication Injection unit type: …/2300 Screw diameter: 70 mm Screw L/D ratio: 20 Injection volume: 1212 cm³ Shot weight: 1103 g Specific injection pressure: 1877 bar Hydraulic screw drive, motor I (high speed) Screw with wear protection (double bimetal, L:D standard) Additional equipment Rotary Servo Technology variable displacement pump (activeDrive) 5/2 pneumatic valve no. 1 for mold moving components (programmable, central compressed air connection, pipe installation) Freely programmable inputs/outputs (3 inputs, 3 outputs) Interface for additional nozzle band heater (socket) 2 core pull circuits controlled by proportional valves, pressure-independent (programmable with unlockable check valves against core drift) Interface for handling devices according to EUROMAP 67 (50-pin) Interface for dosing devices ("Dosing" signal) Ejector with position control, programmable independently of P/F+v, parallel to mold movement Ejector movement controlled by proportional valve, stepless adjustment Reinforced oil cooler (cooling water inlet up to 35 °C)

Condition: excellent (used), Year of construction: 2010, Stork S+ 9000-8650 Injection Moulding Machine Control system: CDS700 Year of manufacture: 2010 The machine is in very good technical condition, fully operational, and ready for immediate use in an industrial facility. It comes complete with a Sytrama 101 GL robot, enabling automation of the injection process. Clamping Unit Clamping force: 9000 kN Platen dimensions (H × W): 1570 × 1560 mm Tie bar spacing (H × W): 1010 × 1010 mm Min. / Max. mould height: 300 – 1190 mm Max. opening stroke: 2290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 98 mm Injection volume: 4010 cm³ Shot weight (PS): 3690 g Injection pressure: 1650 bar Max. injection speed: 400 mm/s Nljdpfsxyqyrox Afrei Additional equipment Pneumatic valves – 4 pcs. Core pulls – 1 fixed / 1 moving Robot included: Sytrama 101 GL The machine is available for inspection and testing under power. Photos and demonstration videos available upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2004, clamping force: 1,100 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,178 bar, injection weight: 103 g, Engel Victory 330/110 Tech General Information Year of manufacture: 2004 Control system: CC200 Weight: 7,400 kg Dimensions (L × W × H): 5.2 × 1.6 × 2.2 m Injection Unit: 330/... Screw diameter: 30 mm Specific injection pressure: 2,178 bar Injection volume: 113 ccm Shot weight: 103 g Clamping Unit: 110/... Clamping force: 110 t Platen dimensions: 680 × 740 mm Nodpfsxywdqex Afrjli Tie bar spacing: without tie bars mm (no exact value) Opening stroke: 500 mm Ejector System Ejector force: 40 kN Ejector stroke: 130 mm

Condition: excellent (used), Year of construction: 2011, Stork S+ 6600-5650 Injection Moulding Machine Control System: CDS700 Year of Manufacture: 2011 The machine is in very good technical condition, fully operational, and ready for immediate use in an industrial environment. Clamping Unit Clamping force: 6600 kN Platen dimensions (H × W): 1370 × 1370 mm Tie-bar spacing (H × W): 900 × 900 mm Min. / Max. mould height: 300 – 900 mm Maximum opening stroke: 1840 mm Locating ring diameter: 200 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 84 mm Injection volume: 2575 cm³ Shot weight (PS): 2369 g Injection pressure: 1650 bar Maximum injection speed: 500 mm/s Additional Equipment Pneumatic valves – 6 pcs. Core – 1 pc. Njdjxyqyfopfx Afroli The machine is available for inspection and testing under power. Photos and operational videos available upon request. We provide assistance with loading and transport arrangement.

Condition: excellent (used), Year of construction: 2007, clamping force: 5,000 kN, screw diameter: 85 mm, displacement volume: 2,128 cm³, injection pressure: 1,574 bar, injection weight: 1,937 g, mold height (min.): 450 mm, Injection Moulding Machine Battenfeld HM 500/3400 Clamping force: 500 t Year of manufacture: 2007 Injection weight: 1937 g Injection unit .../3400 Screw diameter: 85 mm Specific injection pressure: 1574 bar Injection volume: 2128 ccm Injection weight: 1937 g Screw L/D ratio: 22 Tool clamping system 500/... Nlsdpoxywctefx Afroi Clamping force: 500 t Mould plate dimensions: 1590 x 1470 mm Clearance between tie bars: 1000 x 800 mm Mould height: 450 mm Opening stroke: 1150 mm Maximum platen distance: 1600 mm Ejector stroke: 250 mm General data: Weight: 25,000 kg Dimensions [L x W x H] [m]: 7.3 x 2.5 x 2.6 Equipment: - 1 x pneumatic valve - 2 x hydraulic core pulls - euromap 67 interface - bimetallic injection system

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of Manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate production. Perfectly suited for industrial manufacturing requiring high performance and reliability. Clamping Unit: Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Clearance between tie bars (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum opening stroke: 1150 mm Injection Unit: Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Nljdpfx Afsxyqxzerji Injection pressure: 2040 bar Dimensions & Weight: Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Nlsdpfxsxyqxue Afroi Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.