Injection molding machine

Arburg ALLROUNDER 1300 T 1000 – 170

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type TR450 The spray rotary cleaning system type TR450 is an automatic cleaning and degreasing system with a cover that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets measuring LxWxH 520x320x200h mm. The basket must be closed with a lid for the cleaning process. The cleaning result depends on the fact that the parts can be easily circulated in the basket in the case of bulk goods. The fill level in the basket must be observed for this. The system is also equipped with a flood tray under the basket, which enables the parts to be scooped up in a flood, thus achieving an even better cleaning result. including the following equipment: - Completely made of stainless steel 1.4301 inside and out - Level monitoring and automatic fresh water refill - Insulation of the entire system Dodpfsfbt Siex Ah Njuu - Hot air drying (output: 11.6 kW) - Steam vapor extraction - Oil skimmer for bath maintenance - Automatic fresh water refill - 1 small parts basket 520x320x200h mm, mesh size: 6x6 mm, incl. height-adjustable lid Connected load: approx. 20 kW (32 amp plug)

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002 Djdpfop Audqex Ah Nsuu

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Djdpferp Dyrex Ah Nsuu Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant Dsdpfswugczox Ah Neuu 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: ready for operation (used), Year of construction: 2021, operating hours: 67 h, clamping force: 1,600 kN, screw diameter: 45 mm, overall weight: 5,900 kg, controller manufacturer: ARBURG, controller model: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Dodpsx D E Dyofx Ah Nsuu Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information • Screw Diameter: 45 mm • Injection Pressure (Max.): 1580 bar • Shot Weight (Max. g PS): 232 g • Heating Output 9.7 kW | 5 zones • Net Machine Weight: 5900 kg

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. Dedoud H Dmopfx Ah Nsuu We look forward to your inquiry.

Condition: good (used), Year of construction: 1986, Sliding headstock automatic lathe STAR Type: JNC-16 Year 1986 with Fanuc OT control . Bar capacity max: 16 mm. Further data see data sheets Dodpfovbb U Hex Ah Nouu Machine documentation available .

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Technical details Dedpfx Aerxtpdeh Nouu CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 OPENING STROKE 575mm MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Automatic operating hours: 86082 Repairs from recent years: Dujdpfxov D Nxlo Ah Neu Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: refurbished (used), Year of construction: 2026, pressing force: 60 t, Machine for order High speed press BSTA 60 Retrofit and general overhaul Conversion to electronic drive und new Unidor PC-control system. Tool area enlargement possible. Dedpfx Ajxb D Daeh Nsuu Please contact us for detailed offers.