Used Milling And Drilling Machine for sale (95,619)

Condition: good (used), Year of construction: 1998, Ref. -No.: 10583 Manufacturer: MTE Type: BF 4200 Year of construction: 1998 Type of control: CNC Control: Heidenhain TNC 426 Storage location: Halberstadt X-Travel: 4000 mm Y-Travel: 1200 mm Z-Travel: 1500 mm Turning Speeds: 2.500 RPM Rapid Traverse X/Y/Z: 400 m / min Table surface area (LxW): 4200 x 1000 mm Tool changer: 40 Table load max.: 13.000 kg Tool Taper: SK 50 Weight: 20 t Number Of T-Slots: 7 Pcs Width of the T-slots: 22 mm Distance between the grooves: 140 mm Dwsdpfjxmd U Nex Adusc Further information: - Heidenhain Handrad HR410 - 3D-Scanner, Infrarot - Die Kugelspindel auf Achsen Z und Y laufen eingespannt und aufgelagert auf kombinierte radial/axial Rollager und radial Kugellager mit bzw. 250 N/qm, Steifigkeit. Maschine kann unter Strom besichtigt werden.

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Especially designed for staircase construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drilling are easily achievable thanks to the swivelling drilling unit. - Motor with pole changing, two speeds - Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Dwodpsxmatnofx Adusc - Motor start via convenient handle switch - Equipped with Röhm two-jaw chuck 1–20 mm - Linear laser for precise workpiece positioning - Drilling unit can swivel 65° left and right - Pneumatic adjustment of machining height; dowelling possible on two levels without resetting - Desired drilling heights can be set for each level via a digital counter; switching is then pneumatic from the front - Cross movement 340 mm, stepless or in 12 mm increments with indexing rail - Pneumatic clamping possible at any position, controllable from the front - Maximum height adjustment approx. 100 mm above table height - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, 1 clamp column repositionable to the front - 2 swivelling workpiece supports - Suction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Set of drill bits - Operating manual - CE mark - Machine was partially repainted due to existing paint splashes - Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "other offers from this provider."

Condition: used, Year of construction: 2000, x-travel 6000 mm y-travel 1600 mm z-travel 1300 mm control FIDIA C20 /4H-SB tool taper SK50 spindle turning speed range 22 - 4000 U/min SHW – UFZ5 Year of manufacture: 2000 Specifications X-axis 6000 mm Y-axis 1600 mm (stroke with vertical head rotated 1900 mm) Dsdoxmaqyopfx Aduewc Z-axis 1300 mm Orthogonal head 2 axes, indexed 1° Automatically swivelling milling head holder (rear) 360x1 degree Automatically swivelling milling head holder (front) 180x1 degree Control: Fidia - C20 / 4H-SB SK 50 - DIN 69871 Infinitely variable feed range; X-axis: 2–12,000 mm/min. Y-axis: 2–18,000 mm/min. Z-axis: 2–18,000 mm/min. Rapid traverse; X-axis: 12,000 mm/min. Y-axis: 18,000 mm/min. Z-axis: 18,000 mm/min. Spindle/auto. Milling head: Speed 22 - 4,000 rpm Torque max. 1180 Nm Total current load: approx. 50 kVA/80 A. Without clamping plate Without chip conveyor

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 85 m/min, feed rate Y-axis: 85 m/min, feed rate Z-axis: 40 m/min, table length: 3,500 mm, table width: 2,000 mm, spindle speed (max.): 28,000 rpm, table height: 250 mm, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, rapid traverse Z-axis: 40 m/min, table load: 5,000 kg, torque: 70 Nm, rotational speed (max.): 28,000 rpm, overall weight: 22,000 kg, Equipment: rotational speed infinitely variable, Year of manufacture: 2015 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,000 mm A-axis: +/- 115° C-axis: +/- 270° Control system: SIEMENS SINUMERIK 840D SL Clamping table, subfloor Length x Width x Height: approx. 3,500 x 2,000 x 250 mm (cast iron) Table load: max. 5,000 kg/m² T-slots: 22H12 T-slot spacing: 250 mm Milling spindle Spindle power S1 / S6: 40 / 54 kW Spindle speed: max. 28,000 rpm Tool holder: HSK 63A Torque S1 / S6: 51 / 70 Nm Linear axis drives Feed rate X and Y axes: up to 85 m/min Feed rate Z axis: up to 40 m/min Connection data Connected load: approx. 55 kW Line protection: 45 A Dimensions, weights Machine footprint: approx. 6,650 x 6,200 x 5,000 mm Total weight: 21,000 kg Description: Dwodpfjxl Tl Ujx Adujc Additional equipment - 2x chip conveyors - Protective bellows with compressed air sealing - 40 bar ICS coolant supply with belt filter system - Minimum quantity lubrication - 30-position tool changer Optional - Renishaw RMP60 Condition of the machine Fully functional condition, regularly serviced by the manufacturer. Immediately available and still connected to power. Special note The machine requires a special foundation so that the table and chip conveyors can be recessed into the floor.

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm table load max. 200 kg tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a research centre. Dodpfxjxl Tcgo Aduswc Equipment: 3-axis active digital readout made by Heidenhain TNC 113 Fixed angle table Coolant equipment Kelch mounting block Machine vise Counterholding device for the horizontal spindle

Condition: good (used), Year of construction: 1985, Technical Data – Bridgeport Series I Table Size / Work Area 9″ × 49″ (approx. 299 mm × 1245 mm) T-Slots 3 slots, spacing 2.5″ (approx. 64 mm), slot width 0.625″ (approx. 16 mm) Travel Paths X (Longitudinal) without power feed: 36″ (approx. 914 mm) with power feed: 33″ (approx. 838 mm) Traverse Y (Cross Travel) 12″ (approx. 306 mm) Quill Stroke (Quill Travel) 5″ (approx. 127 mm) Knee Travel (Z-Axis/Table Elevation) 16″ (approx. 406 mm) Ram Travel (Headstock Fore/Aft on Ram) 12″ (approx. 306 mm) Min./Max. Distance Spindle Axis to Table Top (Spindle to Table Surface) min: 2.5″ (approx. 64 mm) max: 18.25″ (approx. 463 mm) Min./Max. Distance Spindle to Column Front (Min./Max. Throat) min: 6.75″ (approx. 171 mm) max: 18.75″ (approx. 476 mm) Spindle / Quill Spindle diameter: 1.875″ (approx. 48 mm) Quill diameter: 3.375″ (approx. 86 mm) Spindle taper (standard): R-8 Spindle Motor / Power 30 min. rating: 3 HP (approx. 2.2 kW) Continuous duty: 2 HP (approx. 1.5 kW) Spindle Speed Range (variable, two speed ranges) Low: 60 – 500 rpm High: 500 – 4200 rpm Dwsdpfxoxl R N Ds Adusc Drilling Capacity (Power Quill Feed, mild steel) approx. 3/8″ (approx. 9.5 mm) Milling Capacity (mild steel, cutting) approx. 2 CI/min (Cutting Inches per Minute) Drilling Radius (mild steel) up to Ø 6″ (approx. 152 mm) Traverse Speeds (X/Y) manual / automatic up to 100 ipm (approx. 2540 mm/min) in CNC models Machine Footprint & Height Floor space: 84″ × 120″ (approx. 2140 mm × 3048 mm) Overall height: 87″ (approx. 2210 mm) Net Weight / Shipping Weight Net weight: approx. 1930 lbs (approx. 875 kg) Maximum Workpiece Weight (on table) approx. 750 lbs (approx. 340 kg)

Condition: new, Year of construction: 2025, Ref. -No.: 10463 Manufacturer: IGREK Type: FR 3500 XL Year of construction: 2025 Type of control: CNC Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 6500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° C-Axis: 360 ° Turning Speeds: 12500 RPM Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Table-Size (Lxw): 2290 - 6490 x 3580mm mm Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Machine length: 11500 mm Machine width: 7400 mm Machine Height: 6600 mm Weight: 120 t Further information: IGREK FR 3500 XL – Precision and performance at the highest level The IGREK FR 3500 XL is a CNC-controlled 5-axis portal milling machine of the latest generation (year of manufacture 2024). It was specially developed for the demanding machining of large workpieces and impresses with its versatility and precision. With a modern control system from Siemens 840D or Heidenhain iTNC 640 and a robust construction, the machine offers optimal conditions for manufacturing in a wide range of industries. Key features: Large machining areas: With travel distances of 6,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine is ideal for machining large components. 5-axis simultaneous machining: The A-axis with a swivel range of +/- 115° and the C-axis with a rotation of 360° enable highly precise machining of complex geometries. Powerful spindle: The spindle reaches speeds of up to 12,500 rpm and a maximum torque of 235 Nm – perfect for demanding milling work. High stability: The machine weight of 120 tons and the table load of up to 4,000 kg ensure low-vibration machining even with heavy workpieces. Flexible tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and optimal process times. Rapid feed rate: High productivity is achieved with 30 m/min in the X, Y and Z directions. Dwedpfx Aexmd Szeduec Technical data at a glance: Table size: 2,290 – 6,490 x 3,580 mm Spindle power: 54 kW Max. torque: 235 Nm Tool holder: HSK-A100 Machine dimensions (LxWxH): 11,500 x 7,400 x 6,600 mm Max. table load: 4,000 kg The IGREK FR 3500 XL sets new standards in the machining of large parts. It is available immediately and offers comprehensive warranties and services directly from the manufacturer, internationally and across the board. Use the latest technology for your production – contact us for further details!

Year of construction: 1991, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC 415 Dedpfx Adsxl Hyxsuswc This 3-axis Huron X 61 38 bed type milling machine was manufactured in 1991. It is equipped with a Heidenheim TNC 415 control system and offers substantial travel dimensions with an X-axis of 2400 mm, Y-axis of 1000 mm, and Z-axis of 1000 mm. The machine's transport dimensions are 3000 mm in breadth, 1400 mm in thickness, and 3000 mm in height. Consider the opportunity to buy this Huron X 61 38 machine we have for sale. Reach out for more information. Application Types Milling

Condition: used, Year of construction: 1998, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,600 mm, spindle speed (max.): 4,000 rpm, table length: 6,000 mm, table width: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, CONTROLS .. CNC controls HEIDENHAIN TNC 430 BASIC DESIGN .. basic design: moving column WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. .. among of them simultaneous CNC axes: 3 .. X-axis travel: 4500 mm .. Y-axis travel: 1200 mm .. Z-axis travel: 1600 mm Dwjdpfexl H Iiex Adujc TABLE .. table surface (left-right): 6000 mm .. table surface (front-back): 1000 mm SPINDLE / HEAD .. spindle type: tilting head .. rotation axis: B .. - mode of operation: automatic .. - positioning/indexing: 2.5 ° .. rotation axis: C .. - mode of operation: automatic .. - positioning/indexing: 2.5 ° .. spindle revolutions (max): 4000 /min .. tool fixture: ISO SK 50 Known issues: - Milling head does not swivel due to a defective sensor - Gear stage 2 cannot be switched on

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Dwodpfoxl R Hvex Adusc Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining is possible in a single setup with a 300 mm long tool (A-axis at 90° swivel). Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table is included in the delivery. However, we are happy to offer a customer-specific solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool release: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drives, linear axes Feed rate X, Y, and Z axis: up to 65 m/min Axis acceleration X, Y, and Z: up to 5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weight Space required machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-fold tool changer - Work area enclosure Optionally available at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Condition of the machine Fully functional, in very good condition. Can be inspected under power until April 2026.

Condition: good (used), VEB Fritz Heckert FU 250x1000 milling machine Manufacturer: VEB Fritz Heckert Dwodpfstryc Nsx Aduec Type: FU 250x1000 X-axis: 900 mm Y-axis: 300 mm Z-axis: 380 mm Speed: 28-2800/min Speed: 10-630 mm/min Dimensions: 1240 x 340 mm Speed: 6 kW, 35 A Load: 1.7 t Dimensions: 1580 x 1420 x 1470 mm

Condition: good (used), Machine available for delivery within 15 days. Vertical 5-axis machining center MIKRON WF 41C. CNC Heidenhain 426. 16-tool magazine. Table length: 500 mm. Table width: 1000 mm. Max spindle speed: 4000 rpm. Spindle motor power: 4000 kW. In operating condition. Dsdpfx Adoxl Htfouowc

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Dwjdsxmd Shspfx Aduec Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: good (used), x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 205 x 800 mm T-slots 4 x 45 14 H7 speeds 50 - 3150 U/min tool taper 40 ISO quill stroke 50,0 mm Feeds X + Z Axis 5.0 - 1000 mm/min Feeds Y Axis 5.0 - 670 mm/min rapid traverse 2.4 / 1.6 m/min control Heidenhain total power requirement 5.1 kW weight 950 kg range L-W-H 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN "TNC 135" positioning/path control * 3-axis manual data input control * Programmable by the machine operator * Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical clamping range - Continuously variable speed adjustment - Manually extendable spindle sleeve Dedjxl E Syepfx Aduewc - Hardened and ground guideways - Electro-hydraulic tool clamp - Coolant system - Front coolant tank - operating instructions

Condition: used, Year of construction: 2010, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,010 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 3,000 rpm, table length: 1,450 mm, table width: 1,600 mm, spindle motor power: 37 W, controller manufacturer: NUM 1060 M, CONTROLS .. CNC controls NUM 1060 M WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 2 .. X-axis travel: 3000 mm .. Y-axis travel: 2010 mm .. Z-axis travel: 2000 mm .. rotating range A-axis from: 92.5 ° .. rotating range C-axis up to: 360 ° TABLE .. table surface (left-right): 1450 mm .. table surface (front-back): 1600 mm FLOOR PLATE .. total weight approx.: 12000 kg SPINDLE / HEAD .. spindle revolutions (max): 3000 /min .. tool fixture: ISO SK 50 .. drive power: 37 kW AXIS DRIVES .. traverse velocity X (max): 25000 mm/min .. traverse velocity Y (max): 25000 mm/min .. traverse velocity Z (max): 25000 mm/min Dwjdpexl H Icsfx Adujc ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz ATTACHMENTS .. chip conveyor: yes .. through spindle coolant attachment: yes

Condition: excellent (used), Catalogue number 7766 TECHNICAL DATA - Diameter of machined rods: 12mm/16mm/24mm - In sequence: - Feed - Rubber drive rollers, 2 pcs - 2-knife head - Sleeve - 2 rubber feed rollers - 2 rubber slip rollers - 2 rotation speeds + right/left direction - Interchangeable tool head Dedpsxl D Itjfx Aduewc - Feed motor 2×0.25kW - Main motor 3.1kW - Extraction port diameter 90mm - Dimensions (LxWxH): 1140x770x1100mm - Weight: 136kg ADVANTAGES – Not painted – Compact design – Interchangeable tool head – DTR technical documentation – Used dowel machine, very good condition Net price: 6500 PLN Net price: 1530 EUR based on 4.25 EUR rate (Prices may change with significant rate fluctuations)

Condition: good (used), Thread diameter: 22 mm Thread length: 30 mm throat: 300 mm Max. working height: 1100 mm Hole table: 360 x 500 mm Dwedpfxei Nnutj Aduoc Drilling depth max.: approx. 500 mm Distance between drill bits: 130 mm Power requirement: approx. 1.0 kW Nominal current consumption: 6 A Machine weight approx.: 1.4 t Machine dimensions approx.: 1.3 x 0.68 x 2.85 m Control unit: conventional Unique table for double-headed drilling with 4 material clamps. Size: 375x250 mm The lateral movement of the table is 150 mm

Condition: excellent (used), Complete Red Baron with 3 drilling heads Djdjxl Ecljpfx Aduswc

Condition: good (used), x-travel 300 mm y-travel 350 mm z-travel 350 mm taper in main spindle ISO 40 table surface area 625 x 380 mm T-slots 8 Stk. turning speeds 40.0 - 2.000 U/min transmission ratio 18 Stk. feed stepless 0 - 500 mm/min Dwsdpfjxl E Stex Aduoc quill stroke 60.0 mm distance spindle nose and table min 50 / max 400 mm voltage 400 V total power requirement 5.1 kW weight of the machine ca. 800 kg range L-W-H 1400 x 1100 x 1700 mm from a training workshop (vocational school) Well maintained (!!) Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot angle/clamping table * Swiveling +/- 30 degrees - Axis feed with rapid traverse in X+Z+Y axis * Rapid traverse continuously adjustable - Swiveling machine light - Control cabinet, installed on the left - Coolant device

Condition: used, Year of construction: 2017, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 5,000 rpm, total height: 4,905 mm, spindle motor power: 37 W, controller manufacturer: HEIDENHAIN, controller model: TNC 640, overall weight: 32,000 kg, space requirement length: 14,500 mm, space requirement width: 7,500 mm, CONTROLS .. CNC controls HEIDENHAIN TNC 640 WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 6000 mm .. Y-axis travel: 2200 mm .. Z-axis travel: 1300 mm SPINDLE / HEAD .. - positioning/indexing: 2.5 ° .. drive power: 37 kW Dwodpfxexl Hnis Adujc .. spindle revolutions (max): 5000 /min .. tool fixture: ISO SK 50 .. drive power: 43 kW AXIS DRIVES .. feed velocity (max): 35000 mm/min DIMENSIONS / WEIGHTS .. space requirements -left/right-: 14500 mm .. space requirements -front/back-: 7500 mm .. total height: 4905 mm .. total weight approx.: 32000 kg ATTACHMENTS .. chip conveyor: yes .. coolant unit: yes .. band filtration unit: yes .. through spindle coolant attachment: yes .. European CE standards: yes tool magazine with 60 slots Coolant system via shower ring and IKZ up to 70 bar Coolant type Coolant lubricant / air / air with MMS Electronic handwheel with cable transmission Accessories: Chip conveyor Coolingsystem

Condition: good (used), Year of construction: 1988, Fast Radial Drilling Machine Hersteller: Donau Type: DR 40 DIGI STEUERUNG: NC Steuerung Construction year 1988 EINSATZBEREICHE - BOHREN Djdpfoikvcasx Aduewc Bohrleistung Gesamtloch (Stahl): 40 mm Neck (max): 800 mm SPINDLE / PIN Spindle speed (min): 335/min Spindle speed (max): 1800/min Anzahl der Gänge: 2 Werkzeugaufnahme: MK 4 ON SPECIFICATION Table surface: 1200 x 750 mm ELEKTRISCHE VORSCHRIFTEN Mains voltage: 400 V Mains frequency: 50 Hz ABMESSUNGEN / GEWICHTE Width: 2500 mm Depth: 1250 mm Total height: 2500 mm Weight 2.6 t Drive 6kw

Condition: good (used), x-travel 315 mm y-travel 180 mm z-travel 320 mm taper in main spindle ISO 40 table surface area 600 x 250 mm T-slots 5 Stk. turning speeds 45.0 - 1950 U/min feed stepless 10 - 170 mm/min voltage 400 V total power requirement 5.1 kW Dwodpfexl E Smex Aduec weight of the machine ca. 1300 kg range L-W-H 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained (!!) Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot clamping table - Axis feed with rapid traverse in X+Z+Y axis * Rapid traverse continuously adjustable - Swiveling machine light - Control cabinet, installed on the left - Coolant device

Condition: excellent (used), Year of construction: 1999, Drilling capacity (steel): 18mm Drilling capacity (cast): 23mm Thread cutting (steel): M14mm Spindle holder: MK 2 Spindle stroke: 100mm Extension: 250mm Column diameter: 90mm Dwodpfx Ajkytxzjdujc Power: 0.55 kW Spindle speed: 125 – 2400 RPM / 225 – 4300 RPM

Condition: good (used), x-travel 315 mm y-travel 180 mm z-travel 320 mm taper in main spindle ISO 40 table surface area 600 x 250 mm Dwodpjxl E Sgofx Adujc T-slots 5 Stk. turning speeds 45.0 - 1950 U/min feed stepless 10 - 170 mm/min voltage 400 V total power requirement 5.1 kW weight of the machine ca. 1300 kg range L-W-H 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained (!!) Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot clamping table - Axis feed with rapid traverse in Y-axis * Rapid traverse continuously adjustable - Manual axis adjustment in Z+X axis - Control cabinet, installed on the left - Coolant device

Condition: good (used), Universal milling machine STANKO 676P Longitudinal table travel X: 400 mm Vertical table adjustment Y: 380 mm Upper arm transverse adjustment Z: 250 mm Clamping surface of the vertical table clamping surface: 250 x 630 mm Spindle mount: MK 4 Quill stroke: 60 mm Swivel angle of the vertical head: +-90° Table size of the rigid angle table: 800 x 250 mm Distance between horizontal milling spindle and rigid angle table: 80 - 460 mm Distance between vertical milling spindle and rigid angle table: 0 - 380 mm Dwjdpstrybgjfx Adujc Distance between vertical vertical spindle and column: 125 - 375 mm 16 spindle speeds horizontal: 50 - 1630 rpm. 16 spindle speeds vert.: 60 - 2040 rpm. 16 longitudinal and vertical feeds: 13 - 395 mm/min. 16 headstock feeds: 13 - 395 mm/min. Rapid traverse all axes: 0.935 m/min. Drive power: 2.2 kW Weight approx.: 1.4 t used, in good condition