Meat processing machine

WEIGHING AND BAGGING SYSTEM

Year of construction: 1983, condition: refurbished (used), Baader 185 file + skin machine for whitefish is suitable for large & medium-sized cod, Haddock, Gråsej, Merluza etc. Capacity 24-32 fish / minute, Year mod 1983. Dimensions 690 x 185 cm H 180 cm. Njdpfjifpz Iex Ahveku

Year of construction: 2015, operating hours: 2,450 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 222837, We are selling a T 700 XS from a vegetarian production as good as new. Nkodpsq Umumsfx Ahveu Enclosed 4 tools incl. tool change trolley. Vario 1, tray 171 x 127 mm, 3-use (1-track, 3-row) Vario 2, tray 187 x 137 mm, 3-use (1-track, 3-row) Vario 3, tray 122 x 96 mm, 4-use (1-track, 4-row) Vario 4, tray 227 x 178 mm, 2-use (1-track, 2-row) See detail in PDF

Condition: like new (used), Year of construction: 2009, functionality: fully functional, ITU evaluation unit Sheet Scale Citizen 910 printer PIO signal output - designed for use with paper joggers - scale must be zeroed with specific jogger Nkjdpegz Imujfx Ahveu

Condition: excellent (used), Year of construction: 2018, Baader 588 Filleting Machine Njdpotu Uu Dsfx Ahvoku The BAADER 588 is a unique and user-friendly filleting machine for small and medium-sized whitefish – fresh or defrosted. The consistent running of fish through the machine guarantees a higher throughput. Centralized mechanical adjustments of cutting parameters allows for different species and precise cutting. The BAADER 588 produces fillets of outstanding quality – even from soft fish. It has been specifically designed to allow for easy and efficient cleaning and servicing. The BAADER 588 significantly reduces subsequent trim work downstream. B’Logic® is our dedicated software solution for performance monitoring and yield control. Benefits For fresh or defrosted raw material Continuous and stable operation Simple to use Precise cutting tools minimize ‘giveaway’ Technical Data Working range (approx.) Cod: 400–2,500 g / 35–70 cm Haddock: 400–2,300 g / 35–65 cm Saithe: 400–2,000 g / 35–62 cm Hake: 160–800 g / 20–47 cm Alaska Pollack (h+g): 150–450 g Throughput Up to 35 fish/min. Up to 40 fish/min. (Alaska pollack) ‍ Features Simple operation and maintenance Rapid changeover for to different species Easy to access, maintain and clean Best fillet quality Active cutting tools Smooth surface as a result of reduced fillet stress during processing No gaping No blood spotting No black belly skin White membrane on Flexible Suitable for a wide range of species Fresh or defrosted raw material Small machine footprint Direct fillet transfer to BAADER 59 Skinner possible for consistent product flow Hygienic, open and flexible design Open design for easy access and supervision Open design allows for easy cleaning Quick and easy to remove conveyor belt system

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Foldingmachine for 8 pages ! Make: HEIDELBERG-Stahlfolder Type: TI 52-4 - 4 - RD Format: 520 mm built: 2010 Mach.-Nr.: 1224431350 - Continuus feeder - double infeed-suction-wheels - 1. fold-station 52 cm, 4 buckles - 2. fold-station 52 cm, 4 buckles Njdpfxjw I S Eyo Ahveku - anti-noise-hood - center control-station for all functions - standard delivery - compressor - tools, technical documentation Price on request ,-- / FCA ex DK Availability: Immediately ! Please ask for further detailed pictures ! Video available !

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Njdpfx Ahsvf E Avovjku Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Year of construction: 2025, condition: new, From linear to combination scales Application: Dosing free-flowing products in accurate quantities. Features of the weigher - Simple operation - Quick and easy cleaning - Low maintenance requirements - Tool-free (dis)assembly of all format parts in contact with the product - Low maintenance effort - Stainless steel design (1.4301) - Control system fully integrated in the machine housing - Infinitely variable vibration system for optimum production flow - High accuracy due to combination Technical data - Number of weighing heads: 10 - Weighing container: 2.5l - Weighing range: 10 - 1000g / 2,500g - Accuracy: ±0.2-1.5g - Speed: 60 bags/min (depending on product) - Control panel: 7" touch screen display - Power: 1kW / 230V / 50Hz Nsdpfx Ahjq T R Sbsvjku - Dimensions (LxWxH): 1620mm x 1100mm x 1110mm - Machine weight: 380kg

Condition: good (used), Year of construction: 1999, PCI -NF MEMBRANE FILTRATION PLANT Item: M-2199-PCI-NF Plant This plant is membrane filtration plant used for remove water and / or very low molecular weight substances from liquid dairy products. The low molecular weight substances that are typically removed with NF membranes are monovalent ions such as K ions and Na ions. With APV Rannie-High Press Pump Good condition, Not used last two years!. Year of Production: 1999. Dimension: L 4.000 MM W 1200 mm H 1900 mm Press: Medium pressure 20 bar Retentat flow: 1200 l/h Nkodpohqhw Iefx Ahvsu

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: n.n.b., color channels: 2, paper weight (min.): 40 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, paper height (min.): 900 mm, paper height (max.): 370 mm, total length: 2,700 mm, total width: 2,034 mm, total height: 1,720 mm, space requirement length: 3,700 mm, space requirement width: 3,000 mm, space requirement height: 2,220 mm, counter reading (black): 1,150, type of input current: AC, input current: 16 A, input voltage: 200,210,220 V, Equipment: documentation/manual, Hans Gronhi GH522 Purchased from the second owner, who had taken over the company from the first buyer. This second owner never reinstalled the machine in their print shop; it was stored in a corner for about four years. Recently, I acquired this machine together with some other equipment. To ensure the memory card and electronics were still functioning, I tested the machine with plain paper. All functions operated correctly: press on/off, photocells, and other controls. A video of the test run can be sent via WhatsApp or downloaded from my Dropbox. Unfortunately, Machineseeker does not allow me to share such links directly via their platform. If required, I will try to contact you via WhatsApp using your phone number. More photos with big data also available. Machine details: Type: Hans Gronhi GH522 Serial number: currently unclear (to be checked once in warehouse) Year of manufacture: 2010 (based on PCB markings, see photos) Delivered to first owner: March 2012 Total impressions: to be verified after arrival in warehouse (estimated under 15 million) Max. sheet size: 520 x 370 mm Min. sheet size: 148 x 100 mm Plate size: 520 x 370 mm Dimensions (L × W × H): 170 × 203 × 165 cm (including steps) Weight (incl. packing): approx. 4,200 kg Condition: To be dismantled coming week and then transported to our warehouse in Son en Breugel, The Netherlands (zip code 5692 CC). Very good and clean condition. Rubber rollers are mostly original, with approx. 50–60% life remaining. Mainly printed 2-colour jobs, so rollers have not been washed excessively. No damages on cylinders, gears, or bushes. Well maintained, never involved in accidents. Features: Stream feeder with suction belt feed board Mechanical and ultrasonic double-sheet detection Mechanical pull side lays Continuous monitoring at front lays Semi-automatic plate loading with pre-load facility Automated ink sweep with pre-inking facility Precision laser-cut segmented ink keys Automatic roller wash (programmable) Continuous dampening system with oscillating bridge roller and pre-damp facility Optional integrated or separated dampening during production Nodpew R Enmsfx Ahvoku Speed-compensated dampening Automated refrigeration/recirculation/dosing unit BEIERXIN (1 unit) Cylinder movement: circumferential, lateral, and diagonal Quick-release blanket clamping Touch screen controls Programmable pre-dampening cycle Powder spray unit with heated reservoir and vibration Three motorised suction slow-down devices Sheet de-curler Air shower in delivery Central oil lubrication system Pneumatic controlled operation (small compressor included) Seperate stand alone PUNCHING unit included Packing & delivery: Machine will be professionally packed and strapped on a heavy duty pallet and additional equipment on EURO palletboxes Loaded on your transport Pricing & conditions: Fixed price: € 12,000 LOT (Loaded on Transport, Incoterms). Down payment: 20% (€ 2,400) as deposit. Proforma invoice: Deposit invoice valid for 5 working days. Please supply full company details to issue the invoice.

Condition: excellent (used), Auto pot filling and sealing machine direct from closed soup filling line. Can be supplied with Apple depositors (at extra cost) which were running with it. Nsdpfx Asuzv Dtshvoku