Used Flat Grinding Machine for sale (67,064)

Condition: like new (used), Year of construction: 2019, Weight 6250 kg Size 5810 × 2545 × 2445 mm Design Guodpfx Aovwdhhja Ejd Table clamping area 1500 x 600 mm Max. table load 1300 kg Longitudinal table movement 1600 mm Table groove (number/width) 3/ 16 mm Table feed 7 – 25 m/mm Min./Max. Distance spindle nose-table max. 600 mm Handwheel pitch vertical 0.002 mm Handwheel revolution vertical 0.5 mm Automatic grinding feed 0.002 – 0.02 mm Vertical rapid traverse (Y-axis) 230 mm/min Cross travel 660 mm Cross feed per stroke 0.1 – 12 mm Cross rapid traverse 1250 mm/min Handwheel pitch transverse 0.02 mm Handwheel revolution transverse 5 mm Grinding spindle motor 7.5 kW Grinding spindle speed 1450 rpm Grinding wheel 355 x 50 x 127 mm Hydraulic motor 3.7 kW

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1735072, grinding length: 600 mm, grinding width: 300 mm, total height: 1,800 mm, total length: 2,630 mm, total width: 1,550 mm, distance table to spindle center: 500 mm, table load: 300 kg, grinding wheel width: 38 mm, spindle speed (max.): 1,450 rpm, overall weight: 1,750 kg, power: 3.75 kW (5.10 HP), input voltage: 400 V, disc diameter: 355 mm, Exhibition machine for sale – top condition - Designed for precision surface grinding tasks in industrial applications - Maximum rigidity and stability thanks to stress-relieved annealed and hardened cast iron construction - High-quality spindle with precision tapered roller bearings (runout accuracy 2 µm) Guedjxpvxrepfx Aa Eed - Electromagnetic chuck for securing workpieces, including automatic demagnetization function - Automatic central lubrication system for all guideways and spindles - Hand-scraped and Turcite-B-coated V-flat guideways ensure extremely smooth, low-friction movement and highest precision - Halogen work lamp: dustproof, fully touch-protected, and protected against water jets according to IP65 - A second grinding wheel flange is included in the delivery AD 5 automatic feed control The FSM series models are equipped with an automatic feed control (AD 5). Various grinding cycles are available: surface grinding with infeed at the starting point, slot grinding with infeed at the starting point, and slot grinding with infeed at both the start and end points. The infeed of the grinding wheel can be individually configured depending on the workpiece. The total grinding dimension is divided into rough and fine infeed steps, which can be freely programmed with a minimum increment of up to 0.001 mm, depending on the application. The system also allows dwell times after a defined number of infeed steps and spark-out passes after reaching the grinding dimension, ensuring optimal grinding results.

Condition: used, Year of construction: 1976, grinding length: 350 mm, grinding width: 150 mm, total height: 2,150 mm, total length: 1,200 mm, total width: 1,100 mm, grinding wheel diameter: 175 mm, table length: 400 mm, table width: 150 mm, spindle speed (min.): 2,800 rpm, grinding spindle motor power: 750 W, power: 0.75 kW (1.02 HP), Surface grinding machine, SONY digital readout, manual and automatic feed, manual magnetic chuck 350x150 mm, grinding wheel dresser, coolant system Gsdoxq Abiepfx Aa Ejud

Condition: good (used), Surface grinding machine GEIBEL & HOTZ FS 40 Primus SA, No. 920287, clamping surface 400 x 200 mm Guodpfeunw Ilox Aa Eod

Condition: good (used), FCR Athena flatgrinding machine offered. Type: PB Magnetbed: 150 x 250 mm Speed: 2860 RPM Engine power: 2,5 HP Included coolant pump Dimensions: 80x72x174 cm LxWxH Gujdpehvmriofx Aa Eed For more information call us or send an e-mail.

Condition: good (used), Flat grinding machine Jung Gsdpok N D Urofx Aa Esud X-travel: 740 mm Bed: 725 x 170 mm Magnet bed: 460 x 155 mm Dimensions: 162x130x190 cm LxWxH

Condition: good (used), Jung surface grinding machine X-path: 740 mm Bed: 725 x 170 mm Magnetic bed: 460 x 155 mm Guodpfx Aajq H Ap Tj Ejd Dimensions: 162x130x190 cm LxWxH

Condition: used, Year of construction: 1995, Surface grinding machine Manufacturer: Jung Type: JA 500 CNC-C Year of manufacture: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Maximum workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Gjdpewp E Rgsfx Aa Esud Grinding wheel bore: 51 mm Rotational speed: 4,200 rpm Machine weight: approx. 2,500 kg 3626

Condition: used, Year of construction: 1998, Surface grinding machine Manufacturer: Geibel + Hotz Type: FS 40 AC Year of manufacture: 1998 Table length: 400 mm Table width: 200 mm Maximum workpiece weight on the table: 150 kg Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Guedpfxjwcym As Aa Esd Grinding wheel bore: 51 mm Machine weight approx.: 1,050 kg Machine dimensions L x W x H: 1,800 x 1,200 x 2,250 mm 3626

Condition: good (used), Year of construction: 1990, 1 used surface grinding machine make Rosa type ER 10 Gjdpfxsuuik So Aa Eeud year of construction 1990 Technical data Travel 1000 x 600 mm Magnetic plate 1000 x 600 mm maximum sanding height 400 mm longitudinal speed 2-30 m/min Transverse speed infinitely variable 0-3 m/min Sanding spindle speed 1450 rpm Grinding wheel diameter 400 x 60 x 127 mm Grinding wheel motor power 7.4 KW Dimensions 3900 x 20 50 x 2400 mm Weight 6 tons

Condition: good (used), 1 used surface grinding machine Manufacturer: Geibel und Hotz Model: FS 50 Optimus SA Technical data Design: Hydraulic Maximum distance between table and spindle center: 400 mm Longitudinal travel (X-axis): 580 mm Cross travel (Y-axis): 250 mm Table speed: Infinitely variable from: 2 m/min up to: 28 m/min Automatic vertical feed: Grinding wheel speed: from: 2800 rpm Connection 50 Hz 3-phase: 400 Volt Grinding spindle motor: 2.2 kW Total power requirement: 7 kW Machine weight approx.: 2000 kg Machine dimensions: Gedpow Suyhsfx Aa Ejud Length: 1800 mm Width: 1200 mm Height: 2250 mm

Condition: good (used), 1 used surface grinding machine Manufacturer: Jung Model: HF 50 Gusdpjxgbb Tofx Aa Esd Technical specifications: - Z-axis travel: 400mm - X-axis travel: 500mm - Y-axis travel: 200mm - Table length: 720mm - Maximum spindle speed: 4000rpm - Table width: 200mm - Minimum spindle speed: 1000rpm - Transport dimensions: 2300mm x 1500mm x 1700mm (L x W x H) - Transport weight: 2000kg Equipped with: - Digital readout - Diaform device

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 700 mm, grinding width: 450 mm, NEW ARRIVAL 1 used hydraulic surface grinding machine GEIBEL & HOTZ FS 6040 The grinding area of the G & H FS 6040 is 600 x 450 mm - Year 2000 - Machine with automatic program cycle - rough grinding - finish grinding - spark out - return to starting position. Machine with 2-axis digital readout - stainless steel coolant system - various flanges - fine pole pitch magnetic chuck - including flanges suitable for Jung HF/JF 520. Machine complete with operating manual and wiring diagram - fully tested for functionality. Very little used machine from a test department (original paint). Godpfx Asvz A Dcsa Eoud Pricing: ex stock, unpacked, uninsured, domestic sales plus VAT. Delivery time: immediate - subject to prior sale. Payment: as per usual trade terms - before collection - immediately after receipt of invoice. Best regards, Induba GmbH Mathias Becker

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, New addition Hydraulic flat grinding machine, Z&B Ziersch FS 2045 T, year of manufacture 1988 Godpsk Ufz Nefx Aa Eeud Grinding area: 500 x 200 mm - Vertical spindle - my-Tipp feature: Feed - Electronic handwheel - Automatic feed - Digital display. Automatic transverse feed, continuous and intermittent. Micro-fine transverse adjustment - Magnetic table with demagnetization function. Hydraulic overhead extractor - Adjustable feet - Machine thoroughly checked - all functions are working - runs very smoothly! Electrical wiring diagram available. Price: ex warehouse - Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 1, grinding length: 1,000 mm, grinding width: 600 mm, Geibel & Hotz FS 1050 SD horizontal surface grinder Grinding area 1000 x 600 mm Fine pole pitch of the magnetic plate Many flanges and discs Large paper belt filter Adjustable feet Blade and circuit diagram Balancing scale Machine was in use a maximum of 2 days a week - Not a standard machine Guodev U Dfuepfx Aa Ejd Pricing: ex-works - unpacked - uninsured Delivery time: immediately - subject to prior sale Errors excepted - technical data is non-binding

Condition: used, Year of construction: 1992, Internal item no.: 25086 Surface Grinding Machine Zirsch & Baltrusch Formmaster 6/30 + Magnetic clamping plate 600x300 mm Attention! The grinding spindle is noticeably louder and should probably be replaced in the near future. See video! Technical Data: Maximum grinding area: 650 x 300 mm Electromechanical cross feed: 300 mm Maximum table load: 300 kg Table clamping surface: 650 x 250 mm Maximum distance from table surface to spindle center: 600 mm Gjdpfx Aoxtn R Ija Esud Grinding wheel dimensions: 400 x 40 mm Travel X: 840 mm / Y: 310 mm Automatic infeed in Z Connected load: 8 kW Installation dimensions (LxWxH): 3500 x 2000 x 2500 mm Weight: approx. 3000 kg

Condition: good (used), grinding length: 400 mm, grinding width: 150 mm, Table length 400 mm Table width 150 mm Grinding length 400 mm Grinding width 150 mm Execution: Gsdpfsvga Sujx Aa Esud hydraulic Max. distance from table to spindle-centreline 350 mm Table speeds: stepless from .00 m/min up to 0.0 m/min Automatic vertical feed: from 0.00 0 mm up to 0.013 mm Diameter of grinding wheel 00 mm Width of the grinding wheel 16 mm Grinding wheel speeds: from 800 rpm Voltage 50 Hz 3x 380 Volt Grinding spindle motor .30 HP Machine's weight about 900 kg Overall dimensions machine: Length 1300 mm Width 1 00 mm Height 1500 mm

Condition: good (used), Year of construction: 1989, grinding length: 400 mm, grinding width: 200 mm, Grinding area: 400 x 200 mm Magnetic table: 400 x 175 mm Height adjustment: 410 mm Grinding stone dimensions: 225 x 25 x 50.8 mm Grinding toe speed: 1420 / 2840 rpm Complete with: Gedov Tcy Uepfx Aa Ejud - Coolant system - Hydraulic unit - Documentation Country of origin: Germany Motor power: 1.5 kW Machine LxWxH: 2200 x 1500 x 2100 mm Machine weight: 1100 kg

Condition: used, Year of construction: 1977, Surface grinder, manufactured by Okamoto, type PSG-63 UA, year of manufacture 1977. Magnetic chuck: 600 mm x 300 mm. Grinding dimensions: Length 630 mm, width 310 mm, height 350 mm. Guodpfxjiz Tmks Aa Ejd Ready for use.

Condition: good (used), Year of construction: 1991, CNC surface grinding machine, make ELB, type: BRILLANT B8 UNICON with CNC dresser for profile grinding. Grinding mass: lengthwise 800 mm, width 500 mm, height 400 mm Gujdsvk Elzjpfx Aa Ejd Magnet: 800 mm x 450 mm with paper belt filter and extraction. Complete machine documentation.

Condition: good (used), Year of construction: 1998, Surface sanding machine Fabr.ABA Type: ECOLINE 1006 Bj.1998 with Abamatic 1 N.D. Sanding area max : length 1000 mm width 600 mm height 500 mm Magnetic table size : 1000 mm X 500 mm . Paper belt filter, various accessories Gjdpjvbb Iyefx Aa Eoud Further data see data sheet . Complete machine documentation available. Machine in good condition

Condition: used, Year of construction: 2011, Maximum grinding length: 1200 mm Guodpfoxhdz Eex Aa Eed Maximum grinding length with table dresser: 1000 mm Maximum grinding width: 600 mm Grinding height (table to underside of grinding wheel): 550 mm Table load with magnetic chuck: 975 kg Table load without magnetic chuck: 1200 kg Table speed: 1 - 40 m/min Grinding spindle Motor spindle: 11 kW Grinding wheel: 406 x 152.4 x 100 mm Speed: 1400 rpm Longitudinal axis (Z-axis) Rapid traverse: 5 m/min Adjustable feed: 1 - 50 mm Continuously variable feed: 0 - 2000 mm/min Smallest infeed: 0.001 mm Vertical axis (Y-axis) Rapid traverse: 1.5 m/min Smallest infeed: 0.001 mm Space requirements approx.: 4450 x 2935 x 2540 mm Total weight approx.: 6700 kg Equipment: - Electro-permanent magnetic chuck 1000 x 500 mm incl. electronic control module and potentiometer - Coolant cleaning system with paper filter and magnetic separator 350 l – delivery rate 100 l/min - Static frequency converter incl. automatic dressing compensation - Complete extraction system - Siemens control with electronic handwheel - Various accessories, 2 flanges and 5 grinding wheels

Condition: good (used), Year of construction: 2012, grinding width: 2,000 mm, workpiece weight (max.): 18,000 kg, grinding length: 8,000 mm, Manufacturer: Waldrich Coburg Type: 30-10 S 3640 Control system: SIEMENS 840D Year of construction: 2012 Guideway / Slide way / Surface Grinding Machine Universal grinding head S10 with 110 Degree tilting / 2500 Rpm / 7.5 kW Vertical grinding head S30 with Ø 600 x 150 / 930 Rpm / 22 kW Double SIEMENS 840D Control panel Left & Right side machine KNOLL HL650/4000 Filtration system new 2023 Automatic doors (4x) for easy machine / load / clamping acces Hydraulic table drive with 18000 kg work load Rebuild in 2012 for 1.5 Mil EUR Large package flanches and stones Large package spare parts / ballscrews / measuring / protection covers Specifications Metric US Standard X - axis 8825 mm Y - axis 3010 mm Z - axis 2500 mm Table length 8000 mm Table width 1800 mm Table load 18000 Feed X - axis 1 - 45.000 mm/min. Feed Z-axis 100 - 3000 mm/min. Grinding stone dimensions 600 x 150 mm Power output 22 kW Rotational speed 930 rpm Coolant system Knoll 4000 L Feed Y - axis 1 - 700 mm/min. Dimensions (estimate) length 24360 mm width 9550 mm height 7000 mm weight 80200 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Gjdpfotp T N Tex Aa Ejud

Condition: new, Surface grinding machine Manufacturer: METALLKRAFT Model: FSM 2550 Condition: New machine with warranty Technical data: Table size (magnetic plate): 250 x 500mm Maximum grinding surface: 265 x 540mm Maximum distance spindle-table: 500mm Handwheel graduation for the Z-axis: 0.02mm (5mm per revolution) Automatic feed rate Z-axis: 0.5 – 20mm Handwheel graduation for the Y-axis: 0.01mm (2mm per revolution) Spindle speed: 2900 RPM Spindle motor power: 1.5 kW / 400V Hydraulic unit motor power: 0.75 kW / 400V Feed rate X-axis: 5 – 25m/min Crossfeed motor (Z): 0.15 kW / 400V Rapid traverse speed Y-axis: 250mm/min Maximum grinding wheel diameter: 205 x 20 x 31.7mm Dimensions: 2250 x 1400 x 1800mm Weight: 1350.00kg (net) Standard equipment: massive and stress-relieved machine body made of gray cast iron X and Z axes with V- and flat guides and high-quality Turcite-B guide rails Spindle with class P4 tapered roller bearings guarantees a runout accuracy of 2μ manual adjustment in all axes via large handwheels with vernier scale electromagnetic clamping plate including automatic demagnetization function automatic, motorized feed in the cross axis (Z) Control of the feed in the Z-axis via two potentiometers (coarse feed / fine feed) End position detection in the Z-axis via adjustable end stops automatic, hydraulic feed in the longitudinal axis (X) with adjustable stroke Control of the feed rate in the X-axis Gedjd Rhpqspfx Aa Eeud via manual hydraulic valve Control panel mounted on the right side of the machine body automatic central lubrication of all guide rails painting in RAL 5017 and RAL 7035 operating manual with CE declaration of conformity Scope of delivery: Grinding wheel flange manual balancing device Balancing mandrel Parallel dressing device with diamond dressing tool Halogen work light IP65 Adjustable feet and operating tools Standard grinding wheel (180 x 13 x 31.7mm) Grinding wheels from 7 to 20 mm can be used Vertical feed control AD5: Selection of operating mode for vertical feed (Rapid traverse / Feed / Fine adjustment in steps) Selection of operating mode for the grinding process (Manual / Semi-automatic / Automatic) Selection of grinding type (Surface grinding / Plunge grinding) Switching on/off of the retraction function at the end of the cycle Switching on/off of the automatic shutdown function at the end of the cycle Numerical input field with digital display for: Total grinding dimension, fine feed dimension, Retraction, coarse feed adjustment, fine feed adjustment Number of increments, number of idle strokes and finishing strokes, Adjustment value for incremental fine adjustment

Condition: reconditioned (used), Year of construction: 1995, Surface grinding machine Manufacturer: Geibel & Hotz Model: FS 40 Compact Year of manufacture: 1995 – partially overhauled, newly painted RAL 7035 light gray / RAL 7012 basalt gray Machine No. 9200895 with warranty Accessories: - Electro-magnetic clamping plate 400 x 200 mm (pole spacing: 5 mm) - Wet grinding system Guodpfx Aaod Rl Nqs Eed - Automatic vertical feed with digital display for vertical and transverse movement - Fine adjustment on the cross-slide handwheel - Grinding wheel with flange - Central lubrication system - Manual dresser with dressing diamond - Transverse speed control, stepless - Operating manual - used, as is -