Used Mechani Cal Drawing Press for sale (14,491)

Condition: used, Year of construction: 1987, functionality: unexamined, Press force: 200 kN Gsdpfjwy Sqzox Abgebn Ram stroke, constant: 210 mm Adjustable strokes per minute: 20 - 60 Usable working energy per cycle: 15 kJ Drive power: 24 kW Tool installation height between table and ram, stroke down, adjustment up: 500 mm Ram adjustment: 100 mm Ram clamping area: 600 x 600 mm Table clamping area: 600 x 600 mm Ejector stroke: 90 mm Weight: 20 t

Condition: new, MECHANICAL SCREW PRESS FOR STACKING U-JOINTS PRK-2 Designed for staking u-joints as well as assembly and dissasembly of driveshafts during repair and remanufacturing process Press can be used for the assembly and replacement of cardan joints in the repair and production of cardan shafts, as well as for other processes in which the pressing operation is used. This press is designed for use in a repair shop and does not require any special knowledge for operation and maintenance. Manual feed ensures precision and quality of stacking process. The pressing mechanism is based on a ball screw, which has a high efficiency and a long service life. Technological tooling for replacing stacked u-joints: • Centering housing for the punches. • Set of 8 bits for punching crosses with diameters from 20 to 31 mm for drive shafts. • Set of 4 bits for punching crosses with diameters from 15 to 19 mm for steering shafts. SPECIFICATIONS Working area (L x B x H) 322х312х350 mm Maximum compression force 5500 kg Maximum force on rupture 2000 kg Dimensions (length x width x height) 402х488х1478 mm Weight 160 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Gbodpfx Ajpbwdljbgsn Please contact us to get the best offer!

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Gsdpevuuikjfx Abgobn Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Gedeu Nfinspfx Abgebn Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm Gjdpfxstndu Ue Abgjbn WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: used, Year of construction: 1992, HYDRAP type HPSKZ 63t / 20t Pressure: 63t Down table dimensions: 700x700 mm Godpfx Abjw Slnisgsbn Up table dimensions: 600x600 mm Stroke length: 600 mm Daylight: 800 mm Cushion: 20t

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t Gjdpfx Absym D E Asgsbn dimensions of the machine ca. 7,5 x 4,8 x 7,4 m

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l Godefxyh Repfx Abgsbn weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 550 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t Gjdpfofxygpox Abgjbn ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? :1200 ? :1200 ?

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm Gedpfsfxyirox Abgjbn stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

Condition: new, pressing force: 200 t, DURENDUS 200 T Deep Drawing Press – Double Column Press – 900 × 900 mm Table, 80 T Drawing Cushion The machine shown here was already built and delivered to a customer's order. We can manufacture a new machine of this model for you at short notice – including individual options tailored to your requirements. This is a hydraulic deep drawing press with integrated drawing cushion function designed for forming processes, drawing operations, and precise sheet metal processing. Base price: €76,000 net Options (upon request): The options listed are based on completed customer projects and allow targeted adaptation of the machine to your specific application. The basic version offers a functional standard configuration – in practice, it is usually enhanced with additional features and specifically configured to project requirements. * T-slots and holes to customer specification * Adaptation of stroke, installation height, and press force range * Extended drawing cushion configuration * Customized control modifications * Enhanced safety and monitoring systems ==== Technical Data + Information: ==== General Information * Design: Double column press * Press force: 40–200 t (adjustable) * Total weight: approx. 5,500 kg * Overall dimensions (W × D × H): 2,370 × 1,300 × 3,300 mm ==== Working Area * Table size: 900 × 900 mm * Ram area: 900 × 900 mm * Installation height: max. 800 mm ==== Table & Ram * Table height: 1,000 mm * Ram stroke: 0–500 mm (adjustable) * Column guide: 4 columns Ø 120 mm ==== Speeds * Pressing speed: 4–10 mm/s * Idle speed: 10 mm/s * Return speed: 16 mm/s * Drawing cushion speed: 20 mm/s Gedpeyzf A Hjfx Abgsbn ==== Hydraulics & Drive * Operating pressure: max. 260 bar * Pump capacity: 70 l/min * Servo motor power: 15 kW * Pressure accuracy: ±5 bar * Hydraulic system with air cooling and oil monitoring ==== Control & Operation * Two-hand operation * Mode selector switch (key switch) * Modes: setup, manual cycle * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 20 kW ==== Equipment * Drawing cushion: 30–80 t, stroke 200 mm * CE-compliant design * Safety limit switches * Hydraulic interlock * Control cabinet IP54 with brand components (SIEMENS, ALLEN BRADLEY, SICK) * Two-layer coating according to RAL colors ===== Deep drawing, sheet metal forming, forming technology, manufacture of drawn parts, series production, metalworking Deep drawing press, hydraulic press, double column press, drawing cushion press, forming press, sheet metal processing press Are you looking for a hydraulic press tailored to your application? Contact us for an individualized quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations.

Condition: like new (used), Year of construction: 2019, pressing force: 400 t, pressure:400 t stroke:900 mm Table dimensions:1200 x 1200 mm Deep-Drawing Pillow:150 t travel away deep-drawing pillow:280 mm Daylight Opening:1100 mm Gbedjfh Izmjpfx Abgsn

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Godpfx Abeyupulogjbn Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Year of construction: 1997, Pressure 500 t distance between columns 1550 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1200 x 1300 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 150 mm Gsdpfjy Rutmsx Abgebn die cushion area 950 x 950 mm table height over floor 1245 mm side window 1250 mm ram surface 1200 x 1300 mm speed down 750 mm/s speed up 780 mm/s working speed 105 mm/s oil volume 4000 l power requirement 263,0 kW weight 45,0 t Dimensions (WxDxH) 3,3 x 3,3 x 6,1 m height over floor 6,1 m YOM 1978 - overhaul 1997 with oil-hydraulic drive, hydraulic drawing cushion in table, pneumatic ejector in ram (0,5 t), cutting impact cushioning with depth stop (motoric adjustable), mechanical ram interlocking in TDC as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1979, pressure 63 t stroke 200 mm Godpoy Rur Aefx Abgobn throat 320 mm dayligth 450 mm table surface area 750 x 600 mm die cushion capacity 6,5 t die cushion stroke 80 mm die cushion area 240 mm table height over floor 800 mm ram surface 500 x 450 mm feed down 300 mm/s feed up 300 mm/s working feed 50 mm/s oil volume 380 l power requirement 12,0 kW Weight 6,5 t dimensions of the machine ca. 1,3 x 2,0 x 2,75 mxmxm SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1989, pressure 100 t stroke 560 mm throat 540 mm dayligth 800 mm table surface area 1000 x 1000 mm die cushion capacity 50 t die cushion stroke 200 mm die cushion area 710 x 650 mm Gbjdpfx Abjy Ruq Sjgsn table height over floor 910 mm ram surface 1000 x 1000 mm feed down 400 mm/s feed up 300 mm/s working feed 57,7 mm/s oil volume 650 l power requirement 37,5 kW Weight 15,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,45 mxmxm AS SPARE PARTS DISPENSER

Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm stroke 1100 mm Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Die cushion area in table 4300 x 1830 mm Gbjdpfxsvuucqo Abgon Die cushion pressure in ram 120 t Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Power capacity 450,0 kW Weight 400,0 t Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Height below floor 4,0 m year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way as is where is, WITHOUT dismantling, WITHOUT loading

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 1125 mm stroke 250 mm distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1100 x 900 mm Gjdpfx Asyx Il Ejbgobn pressure of drawing cushion in table 63 t stroke of drawing cushion in table 100 mm die cushion area 700 x 400 mm table height over floor 960 mm side window 700 mm ram surface 1080 x 900 mm oil volume 1000 l power requirement 35,0 kW weight 23,0 t Dimensions (WxDxH) 2,5 x 2,3 x 4,5 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick), hydraulic drawing cushion in table, cutting impact cushioning No foundation pit necessary

Condition: used, Year of construction: 1984, pressure 200 t distance between columns 1800 mm stroke 710 mm Distance table/ram, max. stroke up, adjustment up 1100 mm table surface area 1600 x 1300 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 250 mm die cushion area 1400 x 1080 mm Gbjdpjyx Ilrjfx Abgjn table height over floor 800 mm side window 800 mm ram surface 1660 x 1300 mm speed down 400 mm/s speed up 410 mm/s working speed 14,3 - 49,7 mm/s power requirement 38,0 + 13,0 kW weight 25,0 t Dimensions (WxDxH) 3,65 x 3,3 x 5,4 m height over floor 5,05 m height beneath floor 0,4 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic drawing cushion in table (controllable), hydraulic cutting impact cushioning (in side frame), mechanical depth stop (motoric adjustable), mechanical ram interlocking, two-hand operation

Condition: used, Year of construction: 1980, pressure 400 t distance between columns 3250 mm distance table/ram, max. stroke up, adjustment up 1000 mm Gsdoyx Ik Uopfx Abgjbn stroke 800 mm table surface area 3250 x 1400 mm table height over floor 1250 mm die cushion capacity 170 t die cushion stroke 200 mm die cushion area 1800 x 1000 mm distance between cutting impact cushioning 2610 mm side window 800 mm ram surface 3250 x 1400 mm return capacity 51 t speed down 300 mm/s speed up 300 mm/s working speed 16 - 33 mm/s quantity of oil 2900 l power requirement 100,0 kW weight 70,0 t Dimensions (WxDxH) 4,9 x 3,1 x 7,6 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic drawing cushion in table (controllable), hydraulic cutting impact cushioning with motoric adjustable depth stop, hydraulic ram interlocking, two-hand operation as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 1650 mm stroke 600 mm Gedpoxwdrvjfx Abgebn distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1250 mm die cushion capacity 80 t die cushion stroke 300 mm die cushion area 1300 x 900 mm table height over floor 800 mm ram surface 1600 x 1250 mm oil volume 2000 l power capacity 43,0 kW weight 25,0 t Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m height beneath floor 0,85 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1993, Pressure 250 t stroke 500 mm distance between columns 1650 mm side window 750 mm daylight 1200 mm table surface area 1650 x 1250 mm die cushion capacity in table 80 t die cushion stroke in table 250 mm die cushion area in table 1070 x 780 mm table height over floor 850 mm ram surface 1650 x 1250 mm speed down 10 mm/s speed up 80 mm/s working speed 10 mm/s oil volume 400 l Gbjdpev Svb Aefx Abgen power requirement 22,0 kW Weight 21,5 t dimensions (WxDxH) 2,7 x 2,3 x 4,25 m height above floor 4,0 mm with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic drawing cushion in table, hydraulic cutting impact cushioning (4x Parallel holding cylinders), two-hand operation, hand lever operation

Condition: used, Year of construction: 1999, Pressure 400 t stroke 800 mm distance between columns 2820 mm Side window 950 x 1100 mm distance table/ram (stroke up) 1600 mm table surface area 2800 x 1200 mm die cushion capacity in table 150 t die cushion stroke in table 200 mm die cushion area in table 2000 x 800 mm table height over floor 650 mm ram surface 2800 x 1200 mm speed down 420 mm/s Gbsdpfxev Sva Se Abgjn speed up 300 mm/s working speed 17,5 - 29,5 mm/s oil volume 2500 l power requirement 75,0 + 22,0 kW Weight 50,0 t dimensions (WxDxH) 4,1 x 2,8 x 7,2 m height over floor 6,15 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, hydraulic ram interlocking, two-hand and four-hand operation

Condition: used, Year of construction: 1991, pressure 200 t distance between columns 1100 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1100 mm table surface area 1000 x 1000 mm pressure of drawing cushion in table 63 t stroke of drawing cushion in table 250 mm die cushion area 800 x 750 mm Gbodpfjvzxqrex Abgon table height over floor 800 mm ram surface 1000 x 1000 mm Speed down 400 mm/s speed up 250 mm/s working speed 22 - 56 mm/s power requirement 45,0 kW weight 24,0 t dimensions (WxDxH) 2,4 x 1,5 x 5,9 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ram interlocking, two-hand operation

Condition: used, Year of construction: 1996, pressure 100 t throat 510 mm stroke 600 mm dayligth 1000 mm table surface area 1025 x 650 mm die cushion capacity 25 t die cushion stroke 200 mm die cushion area 600 x 400 mm Godpovuunmsfx Abgobn table height over floor 970 mm ram surface 1025 x 650 mm feed down 350 mm/sec feed up 330 mm/sec working feed 30 - 43 mm/sec oil volume 540 l total power requirement 48,0 kW weight of the machine ca. 12,0 t required space 1,2 x 2,7 x 3,9 m with oil-hydraulic drive, hydraulic drawing cushion in table Video of the finished 'sister machine' - with new electrical control - available