Drawing press / calibrating press

Krupp PDF 1-200/06/210

Condition: used, Lasko hammer KGK 063 Impact force 630 mkp Stroke max. 630 mm Chsdou Eb Niopfx Afgjc Bear weight 630kp Top pressure - filling pressure 5 bar

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Chedpfx Afopkyn Rogoc Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Inspection under power possible at any time! Technical specifications as per the pictures! Chedpfx Aoy Iwlasfgoc Machine is immediately available!

Condition: repair required (used), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 x-axis 500 mm y-axis 350 mm z-axis 610 mm Cedjwmwrdjpfx Afgshc Motor spindle 18,000 rpm Power 10.2 kW 24-position tool changer Weight 3,200 kg with 4 axes SK 30 tools approx. 40 tool holders The machine has the following problems: - Heidenhain 430 control system is defective (booting up is not always possible, crashes during machining)

Condition: used, Year of construction: 2003, CNC machining center, universal Manufacturer: AXA Type: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel distances: X/Y/Z = 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60 positions Spindle speed: 10,000 rpm Weight: approx. 20 tons Csdpfxjwwt Nmo Afgohc 51026ä

Condition: like new (used), All parts are for sale, complet. Chsdpjhi Tvbofx Afgjc

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Cjdpfx Afjwbginegjhc Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Weight of the machine, kg: 27’000

Year of construction: 2018, condition: excellent (used), Used Fagor 2500ton hydraulic h frame press for sale FAGOR H4-2500-5000-3000 2500 ton YOM: 2018 Moving Bolster Chodpoifkldjfx Afgoc Table Size: 5000 x 2500 mm Die Cushion in Table: 600 to stroke: 400 mm Die Cushion in Ram: 350 to stroke: 200 mm Manufacturer: Model: Controls: PLC SIEMENS Simatic TouchControl Manufact. year: 2018 Press Design frame design H-frame Openings in uprights yes Moving bolster yes Press forces Total force (nominal) 2500 to Press Table Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Table height over floor 820 mm Ram Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Stroke 1800 mm Ram (hydraulic press) Number of main-cylinders 4 Approximation velocity max. 490 mm/s Working velocity max. 17 mm/s Return velocity max. 250 mm/s Cushion in ram Force of cushion 350 to Stroke 200 mm Clamping surface (left-right) 4300 mm clamping surface (front-back) 2500 mm working principle hydraulical regulated yes page 2 of 2, Stock No.: 7-46523 Die Cushion (table cushion) force of cushion 600 to stroke 400 mm clamping surface (left-right) 4320 mm clamping surface (front-back) 2700 mm working principle hydraulical regulated yes Tool Assembly Dimensions Distance between columns (H-frame) 5050 mm Tool Assembly Dimensions Distance table – ram max. 2700 mm Electrical specifications Total power consumption 565 kW Mains voltage 400 V Mains frequency 50 Hz Dimensions / weights Height above floor level 10750 mm total weight approx. 500000 kg Light barrier yes Hydraulic overload protection yes This FAGOR machine was manufactured in 2018 and commissioned in 2019 and was only used sporadically after that. The condition can be described as new. Description of condition – Hydraulic press equipped with: – front moving bolster, – draw cushion in the table – cushion inside the ram, – 16 hydraulic tool clamping units, – two hydraulic cylinders for ” out of center pressure ” compensation – Siemens HMI touch control, – ideal for tryout of tools. – max. rapid speed of ram 490 mm/sec – ram and table deflection accuracy 0,125 mm/m.

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm control: Fagor 8055 MC tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. Chsdpeu Idfrefx Afgec rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Condition: used, Year of construction: 1988, Technical details: x-travel: 800 mm y-travel: 410 mm Csdoy S T T Uspfx Afgshc z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Accerories 2 Chip conveyor, rear side disposal Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" *