Used Short Cycle Press Line for sale (26,778)

Condition: used, Year of construction: 2001, Short-cycle pressing line Manufacturer: Wemhöner Type: KT-F-1E Year of manufacture: 2001 Iedpfxozuzi Ts Ahbetn Technical data - Pressing area: 5,750 mm x 2,200 mm - Operating side: left - Plate dimensions: Length: 2 x 2,600 mm - 2 x 2,620 mm Width: 2,070 mm Thickness: 6 mm - 40 mm - Pressing pressure: approx. 40 kg/cm² Note: Upon request, the complete layout plan of the system can be sent. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: like new (used), Automatic pressing line (short cycle), useful to apply veneer, paper or laminates, composed of: V03022) Loader (Portal) "SAG" Double-station (of pick-up) with central motorized rollers table V03023) Brushing machine (to top and bottom clean the panels) "POLIMA"  V03024) Glue Spreader "OMMA" V03025) Motorized Conveyoring Disks way "OMMA" Itjdpfx Aodun Nijhben V03026) Preparing table for the panels and motorized in-feed carpet to the press "SIMI" V03027) Short cycle hot hydraulic Press "SIMI IMPIANTI" mm 1400 x 4500, with No. 10 pressing cylinders V03028) Unloader-stacker (Portal) "SAG" Double-station (of storage) with central motorized rollers table

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment Ijdpfx Ajz Rnu Tehbotn • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: excellent (used), Year of construction: 2019, Ref: 10959 . 2019 DGR RHLE 30 Book Line Fully automated, compact, automatic casing-in line for short-run hard cover book production. Excellent condition, only 375,000 books made! Features: * Very short make-ready times (no need to change format parts!) * Automatic motorised format change (optional) * Simple operation by a single operator *Superior industrial book quality *Small footprint *Offline or inline operation possible *Special single copy option for individual books * Designed for books with rounded or square spines Equipped with: Itsdpfjy Avl Iox Ahbjn Book block feeder Pre-heating section for hot-melt bound books Rounding & backing station (adjustable, no size change parts req.) Back lining & Headbanding station (with hot-melt or PVA glue) Flexible case magazine for plastic or hardcover cases Case preheating & forming unit (adjustable to the spine radius) Casing-in station with PVA gluing (adjustable film thickness) Hot-melt joint gluing station with pre-melter Transfer to; FE33 Pressing & joint forming machine Cooling, drying conveyor. Specification: Mech. speed, Max: 1200 cycles/h Format range (W x H) Max: 300mm x 300mm / Min: 100mm x 120mm Book block thickness, Max: 60mm / Min: 8mm (opt. 4mm) Dimensions: ca. 5000mm x 4000mm

Condition: used, total length: 1,800 mm, total width: 800 mm, total height: 2,100 mm, Year of manufacture: 2026 Colour: Blue Empty weight: 1.145 kg Price: On request - Year: 2026 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table width [mm]: 1500 - Height adjustment [mm]: 1000 - Pressing speed [mm/s]: 10 - Column spacing width [mm]: 1500 - Transport dimensions: 1800mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 1145kg - Transport packages [pcs.]: 1 Financial information Itsdps Aawidofx Ahbon VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2024, operating hours: 6,000 h, condition: used, functionality: fully functional, !!!!!REACH FOR SEPERATE PARTS SELLING!!!!! RECYCLING LINE 1 GAZIANTEP/ TURKİYE 450000EURO working hour: 6000 hour ## Included Equipment ### 1 Disan Hydraulic Baling Press * Model: DKPM 120-2024 * Capacity: 120 tons * Condition: Active and fully operational ### 1 Disan Hydraulic Shredder * Model: DPM 2024 * Capacity / Type: 1600 * Condition: Active and fully operational ### 1 Sorting Conveyor * Brand: Disan Hydraulic * Year: 2024 * Material: Rubber * Length: 15 m ### 3 Industrial Conveyors * Brand: Disan Hydraulic * Year: 2024 * Material: Steel and rubber * Lengths: Between 12 and 22 m ### 4 Cleated Conveyor Belts * Brand: Disan Hydraulic * Year: 2024 * Material: Rubber * Length: 6 m each ### 1 Bale Opening Machine * Brand: Disan Hydraulic * Year: 2024 * Material: Steel ### 1 Plastic Crushing Machine * Type: 80 * Condition: Active and fully operational Itodpfxezl Rdns Ahbon ----- RECYCLING LINE 2 IZMIR / TURKIYE working hour 12000 hour 400000 EURO ## Included Equipment ### 1 x Disan Hydraulic Baling Press * Model: DKPM 120-2024 * Capacity: 120 tons * Condition: Fully operational and in active use ### 1 x Disan Hydraulic Shredder * Model: DPM 2024 * Capacity / Type: 1600 * Condition: Fully operational and in active use ### 1 x Sorting Conveyor * Brand: Disan Hydraulic * Year of Manufacture: 2024 * Material: Rubber * Length: 15 m ### 3 x Industrial Conveyors * Brand: Disan Hydraulic * Year of Manufacture: 2024 * Material: Steel and rubber * Lengths: Between 12 m and 22 m ### 4 x Cleated Conveyor Belts * Brand: Disan Hydraulic * Year of Manufacture: 2024 * Material: Rubber * Length: 6 m each ### 1 x Bale Opener * Brand: Disan Hydraulic * Year of Manufacture: 2024 * Material: Steel ### 1 x Plastic Crusher * Type: 80 * Condition: Fully operational

Year of construction: 1993, condition: ready for operation (used), A complete linked Hermetik slab press line Hanke with a Hermetik press is available. Product: concrete and building material slabs, pressing force: 600t, pressing process: dry, min. existing format: 400mm/400mm, max. existing format: 800mm/600mm, production capacity with 400mm/400mm slabs: approx. 96m²/h. Including conveying and circulation system, storage system, surface and post-treatment systems, blasting system for surface structuring, impregnation system, coating system, handling and automation technology, portal and gripper systems, direct washing, automatic stacking and transfer operations, packaging and further peripheral equipment. This is a complete 0-100 line. Documentation available. On-site inspection is possible. Isdpox S Rbvsfx Ahbstn

Condition: excellent (used), Year of construction: 2007, operating hours: 1,192 h, functionality: fully functional, machine/vehicle number: 1541, total width: 2,000 mm, total height: 2,500 mm, total length: 25,000 mm, briquette diameter: 90 mm, overall weight: 6,000 kg, Equipment: CE marking, type plate available, Complete production line for cylindrical briquettes, Ø 90 mm. The line includes a Di Più BRIK MB90 briquetting press, an input sawdust conveyor, a briquette cooling tower, a briquette cutter, a briquette sorting conveyor, a shrinking tunnel (packaging machine), and an output roller conveyor. Ijdpfxjy U D Uus Ahbotn

Year of construction: 1990, condition: like new (used), Short/ Noodles pasta line: - capacity 400 kg / h - Delivery conveyor - mixer - dispenser, water / flour, horizontal - worm conveyor - Press - Vibro feeder , reconditioned in 2010 - First dryer , reconditioned in 2010 - Secound Dryer - Two drying strips - Two strips for dried pasta Iodpfxoh Dxgao Ahbetn - Metal Detector - Automatic packing unit

Condition: excellent (used), Year of construction: 2016, operating hours: 9,001,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. Isdpsy Uk A Sofx Ahbetn DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE .

Condition: used, machine/vehicle number: 008708, Position 1: Continuous Cycle Presses BIELE-FRAME ASSEMBLY + PRESSING LINE Iodpfx Ahoztaufsbotn

Year of construction: 2010, condition: excellent (used), I sell the complete line for production of solid wood panels. Product size max. 2600X2100mm Complete line consists of: 6-spindle Weinig Unimat fourside moulder Cross chain conveyor Automatic Glue spreading unit with cycle programming Itsdpfxsg D Uuqs Ahben Entry table before the press Italpresse GB/13 Super Press size 2600mm (Parallel dimension / element length) x 2100mm (Cross dimension / Working width) Output table with rollers and cross chain outfeed conveyor Available as a complete line or sellable also separately. Because of that, the price is on agreement. Available immediately. Possible to test. Suitable also for another jobs. Products like parquettes, floor inputs, etc.

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 2,100 mm, Year of manufacture: 2026 Colour: Blue Empty weight: 540 kg Price: On request - Year: 2026 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 Itjdpfjz U U Dpox Ahbon - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 60 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 - Pressing speed [mm/s]: 10 - Options: Verplaatsbare cilinder - Column spacing width [mm]: 750 - Transport dimensions: 1200mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Storti Nailing Line GSI/150-AL2 – pallet line The Storti GSI/150-AL2 pallet nailing line is designed for efficient pallet production. This robust industrial machine is suitable for automated pallet assembly, offering reliable performance and increased production capacity. Holtec Variocut VC-SHKA-HPI – cut-to-length saw / optimization line Iodpfezgayuox Ahbetn This industrial machine is designed for precise and efficient wood cutting. It is suitable for woodworking operations requiring reliable performance, high output, and accurate material cutting.

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Iodpfoi Akrkox Ahbstn Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Year of construction: 1990, condition: good (used), Short/ Nest Line Capacity - 400 kg/h Iedpfx Ajn Arzkjhbetn 1. Silo - cyclone 2. Big silo 3. small silo 4. Mixer 5. Extruder 6. Chain with dough buckets 7. Dryer 8. output transporter 9. Chain conveyor for buckets - 2 pcs 10. Elevator (at the end of the line) 11. Trans, strip of finished product 12. Comand pult 13. El Cabinet 14. Automatic packing Unit

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 2,200 mm, Year of manufacture: 2026 Colour: Blue Empty weight: 970 kg Price: On request - Year: 2026 - Documentation available: Yes Itedpj Aacybjfx Ahbon - CE marking present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 300 - Ram width [mm]: 120 - Throat depth [mm]: 1000 - Pressing speed [mm/s]: 10 - Column spacing width [mm]: 1000 - Transport dimensions: 1200mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Iodopvlf Sepfx Ahbstn Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Year of construction: 2023, condition: like new (used), functionality: fully functional, Complete briquetting press line for the production of charcoal, mixing, and briquetting of various sludges! The plant includes a DOUBLE CRUSHING PRESS MOLDING MACHINE, mixer (paddle mixer), CIRCULAR COAL SIZING BLADE SYSTEM Q180*25MM, belt conveyor (6000x5500 mm, 8mm rubber belt, speed adjustment), 2x Q HELICAL CARRIER, conveyor belt 500x4000 mm, coal crusher group system (A GROUP SYSTEM), and coal drying oven. The complete electrical system for each unit is present and functions flawlessly. The plant is in like-new condition and ready for immediate operation. Ijdew Nh Adjpfx Ahbetn

Year of construction: 2014, condition: excellent (used), functionality: fully functional, RECYCLING PELLETIZING EXTRUSION LINE – BEIER 2014 / EKOCHEM – 2023 – with autostart heating - Belt conveyor with amperes load control - Agglomerator – 75 kw with cooling blower and auto water spray system - Main engine extruder – 110 kw - Double degassing Itjdpfx Ahouac Ugsbsn MELT LASER FILTER SYSTEM – HOP 400 – Ekochem – 2023 - with autostart heating - with cooling pump - laser filter spare parts: 1 set 200 microns, 1 set 250 microns, 2 sets 300 microns, 2 blades PELLETIZER – RW-440 – Ekochem – 2023 - with new Ekochem die head water pump - with PE and PP die head - with air compressor and custom die head blades – 48 h/set change - Centrifuges - Vibrator - Heated Silo + weight system - Capacity: PP( 400 – 500 kg/h) / PE( 500 – 600 kg/h )

Condition: used, machine/vehicle number: 008215, Max working length: 2300 mm Max working width: 1300 mm Pressure Exerted: 15 Kg/cm2 Itjdpex A Tihefx Ahbon No of Pressing cylinders: 4 No of Daylights: 10

Year of construction: 2016, condition: good (used), CMC PROFI-LINE R-320 Rotary / Semi-Rotary Label Die-Cutting & Finishing Machine 320 mm | Servo Technology | Register Die-Cutting | Rewinding | Professional Label Finishing Dear Sir or Madam, we are pleased to offer the following CMC PROFI-LINE R-320, a professional rotary die-cutting and label finishing machine designed for the converting of self-adhesive labels and narrow-web materials. The machine was manufactured in 2016 and offers a compact yet highly functional configuration for professional label production. With a working width in the 320 mm class, servo-controlled web transport, register-controlled die-cutting, and several winding positions, the machine represents an attractive solution for label converters looking for a flexible finishing system for digitally or conventionally printed label material. The machine is currently installed and can be inspected by prior appointment. _____ MACHINE DETAILS Manufacturer: CMC Maschinenbau GmbH Model: PROFI-LINE R-320 Machine type: Rotary Die-Cutting / Label Finishing Machine Year: 2016 Machine No.: 100 586 Working width: approx. 320 mm Electrical supply: 400 V Frequency: 50 Hz Installed power: 20.5 kW Maximum machine speed according to machine plate: 90 m/min Isdpfjz Ea N Rsx Ahbetn Machine weight: approx. 1,800 kg CE marked _____ DIE-CUTTING SYSTEM The machine is equipped with a professional rotary die-cutting section suitable for the finishing of printed self-adhesive label materials. Visible equipment includes: • Rotary die-cutting station • Magnetic cylinder system • Counter-pressure cylinder • Adjustable die pressure • Heavy-duty die-cutting frame • Servo-controlled material transport • Register-controlled production • Suitable for printed label webs • Matrix / waste separation The machine is particularly suitable for the finishing of digitally printed labels where precise die-cutting registration is required. _____ REGISTER CONTROL The machine is equipped for register-controlled operation, allowing the die-cutting process to follow pre-printed material. This makes the machine suitable for: • Digital label production • Flexographically printed labels • Pre-printed self-adhesive materials • Short- and medium-run label finishing The servo-controlled system helps maintain stable web positioning during production. _____ WEB HANDLING The machine is equipped with an extensive web path and several web-handling components. Visible on the machine: • Electronic web guiding system • Web guide sensor • Multiple guide rollers • Controlled material feed • Adjustable web tension • Pneumatic shafts • Several rewinding / waste winding positions The web guiding system contributes to precise material alignment before and during the die-cutting process. _____ UNWINDING The machine includes a professional unwind section for roll-fed production. Features visible on the machine include: • Pneumatic unwind shaft • Roll-fed material handling • Controlled web tension • Adjustable web path • Material guiding system The machine is suitable for typical labelstock, paper and film-based self-adhesive materials. _____ REWINDING

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 44 kW (59.82 HP), input voltage: 400 V, input current: 68 A, table width: 2,250 mm, table length: 4,000 mm, OTT press – 4000x2250 mm working surface Itodpfx Asz Rn Sfshbjn Programmable control, heated platens, 8-cylinder hydraulic pressing system. Heated vertical working surface (can also be used horizontally). For sale in excellent technical condition!

Year of construction: 2020, operating hours: 2 h, condition: reconditioned (used), functionality: unexamined, For sale is a complete PET bottle recycling washing plant for processing used PET bottles into clean PET flakes. The plant is designed for a production capacity of approximately 1,000 kg/h and is suitable for recycling companies, plastics processors, and companies that want to industrially sort, shred, wash, and dry PET bottles. According to the documentation, the water-contacting components are made of SUS304 / stainless steel 304. Technical Specifications Feature Specification Plant type PET bottle recycling and washing plant Capacity approx. 1,000 kg/h Raw material used PET bottles End product cleaned PET flakes Residual moisture ≤ 1% Flake size approx. 14 mm, adjustable Proportion 8–12 mm ≥ 90% Fine granulate ≤ 3% Powder content ≤ 5% Installed power 238 kW Power consumption approx. 153 kW/h Water requirement approx. 6–8 t/h, recyclable Working area approx. 59 × 4 × 6 m / approx. 208 m² Personnel requirement approx. 9 people Itedpfjzhifiox Ahben Plant scope The line consists of the central machines for the complete recycling process: Conveyor belts Bale opener / De-Baler Label remover Manual sorting station Metal detector Plastic mill / Crusher Screw conveyor Float-sink washing systems High-speed dewatering machines Hot steam washer High-speed friction washer Zig-Zag label blower for label and dust separation Storage or product silo Electrical control cabinet Description This PET washing plant is designed for the industrial recycling process of post-consumer PET bottles. The process begins with the feeding of the compressed bottle bales, followed by bale opening, label removal, manual sorting, and metal detection. Subsequently, the bottles are shredded and cleaned in several washing, friction, and dewatering stages. The plant features a hot steam washer that operates with water at approximately 90–95 °C and, together with cleaning agents, removes oil, dirt, adhesives, and label residues. The flake stream is further cleaned via float-sink washers to separate caps, label residues, and other foreign substances. The final drying takes place via high-speed dewatering units. The result is clean PET flakes with a residual moisture content of a maximum of 1%, suitable for further processing, e.g., granulation, extrusion, or recycling into plastic products.

Year of construction: 2002, condition: excellent (used), Machine used for disassembly in very good condition. We can also offer a disassembly and assembly service as well as technical inspection. Isdpfx Ashq Dcyohbetn