Used Manufacturing for sale (38,942)

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 152-026710, overall weight: 3,000 kg, total height: 5,593 mm, total width: 1,340 mm, load capacity: 5,000 kg, power: 4.63 kW (6.30 HP), main lifting speed: 4,000 mm/min, fine lifting speed: 12 mm/s, throat depth: 4,000 mm, working height: 4,500 mm, operating hours: 20 h, Equipment: documentation/manual, 5 t pillar-mounted slewing crane with electric hoist and electric slewing drive Manufacturer: ABUS Kransysteme GmbH Type: VS 660 pillar-mounted slewing crane with electric chain hoist / wire rope hoist GM 1000.5000 H-162.41.6000.6.E130.20 Cedpfezd Sqaex Albshb Year of manufacture: 2023 Serial No.: Crane: 152-026710 Trolley: 250-123870 For sale is a like-new pillar-mounted slewing crane with a lifting capacity of 5,000 kg and a reach of 4,000 mm. The system was put into operation at the end of 2023 and has only been used very little. According to the available remaining useful life calculation, only 20 operating hours have been recorded up to April 2025, resulting in a remaining reserve of approximately 1,598 hours or a projected remaining useful life of over 30 years. The crane features an electric slewing drive, an electric trolley, and a two-stage hoist. Operation is conveniently performed via a pendant control. The system is equipped with a load indicator system (LIS-SV), upper and lower hoist limit switches, and the associated inspection and conformity documents. Scope of supply: * Complete pillar-mounted slewing crane * Electric slewing drive * ABUS trolley * ABUS wire rope hoist * Load hook 5 t * Crane inspection book * Declaration of Conformity * Remaining useful life calculation * Existing technical documentation Condition: Used, very good condition, low operating hours, regular inspection records available. System is visually and technically well-maintained. Photo of the assembled system is available. Location: Dresden Loading: Loading onto a suitable transport vehicle is included in the purchase price. Inspection: An inspection of the system is expressly desired and possible by appointment. Technical documents and further images can be provided upon request. Subject to prior sale and errors. * Lifting capacity: 5,000 kg * Reach: 4,000 mm * Crane type: VS 660 * Pillar diameter: 660 mm * Underside of boom: 4,983 mm * Hook travel: 6,000 mm * Crane classification: H2 / B3 * Hoist motor group: 2m / M5 * Operating mode: Indoor operation * Slewing drive: electric, two-stage * Slewing speed: 0.15 / 0.60 rpm * Hoisting speed: 0.7 / 4 m/min * Trolley travel speed: 5 / 20 m/min * Operating voltage: 400 V / 230 V, 50 Hz * Total connected load: 4.63 kW * Total current consumption: 12.07 A * Load indicator system: LIS-SV * Hook: Single hook DIN 15401, 5 t * Weight of boom: approx. 869 kg * Weight of pillar: approx. 872 kg * Weight of trolley: approx. 356 kg * Total weight of system: approx. 2,100 kg

Condition: used, functionality: fully functional, Various used rack milling cutters / rack group milling cutters from different manufacturers. Our asking prices are net, ex works, plus packaging costs, starting from €170. Individual prices as follows: Manufacturer: Arnold Dold GmbH & Co.KG Module 0.5 - Group milling cutter - Asking price €370 Module 0.7 - Group milling cutter - Asking price €380 Module 0.9 - TIN coating - Asking price €530 Module 1 - 2 units available - Group milling cutter - Asking price €390 Module 1.25 - Group milling cutter - Asking price €410 Module 1.5 - TIN coating - Asking price €750 Module 1.75 - Group milling cutter - Asking price €730 Module 2 - 4 flutes - one defect - 1.89 kg - Asking price €210 Module 2 - TIN coating - Asking price €770 Module 2.5 - 8 flutes - one defect - 13.52 kg - Asking price €470 Module 3 - one defect - 13.29 - Asking price €230 Module 3 - 7 flutes - Reground - 13.77 kg - Asking price €200 Module 3 - 3 flutes - Asking price €290 Module 3 - TIN coating - Asking price €520 Module 5 - 4 flutes - Reground - 12.15 kg - Asking price €170 Module 5 - 4 flutes TIN coating - Asking price €750 Module 6 - 3 flutes TIN coating - Asking price €760 Module 6 - 3 flutes TIN coating - Reground - 11.16 kg - Asking price €400 Module 7 - 3 flutes Reground - 11.41 kg - Asking price €430 Module 8 - 3 flutes Reground - 5.28 - Asking price €190 Module 8 - Reground - Asking price €450 Module 8 - TIN coating - Asking price €780 Module 10 - TIN coating - Asking price €790 Module 10 - Reground - Finished milling cutter - 0.515 kg - Asking price €320 Module 12 - 2 units - TIN coating - Finished milling cutter - Asking price €580 Module 13 - Finished milling cutter - Asking price €410 Module 14 - Reground - 5.18 kg - Asking price €240 Module 16 - Asking price €600 Module 16 - Reground - 5.14 kg - Asking price €300 Involute angle: 20° BPII-Ü Bore diameter [mm] 40; 50; Groove [mm] 10: 12 Width [mm] 32.5; 45.5; 44; 17/21; 16/20; 14/18; 21/25; 18/22; 65/73; 48/57; 31; 66/72; 69/77; 70/78; 60/64; 60/66; 82; 72/80; 82; 40; 39; 47; 52; 56; 64 Outer diameter [mm] 169; 140; 141; 200; 150; 198; 195; 199; 197; 201; 200; 219; 192; 191 Manufacturer: Saazor - Wälztechnik ZORN GmbH & Co. KG Module 1 - 16 flutes TIN coating - one defect - 10.18 kg - Asking price €510 Module 1 - 16 flutes TIN coating - Asking price €590 Module 1.5 - 9 flutes Group milling cutter 9 flutes - Asking price €560 Module 2 - Pin milling cutter - Asking price €390 Module 6 - Pin milling cutter - Asking price €640 Chodpfxjytrh Es Albjb Module 10 - TIN coating - Asking price €350 Involute angle 20° DIN 3972 II - Ü or DIN 3972 II Kl. A - Ü Bore diameter [mm] 40 Groove [mm] 10 Width [mm] 52/60; 55/85; 60/90; 33/40 Outer diameter [mm] 176; 200; 198; 199 Manufacturer: Klingelnberg Module 2.5 - Asking price €360 Module 2.75 - Asking price €380 Module 3.25 - Asking price €170 Module 3.75 - Asking price €200 Module 4.5 - Asking price €220 Involute angle 20° Bore diameter [mm] 40 Groove [mm] 10 Width [mm] 30/38; 28/36; 35/42; 39/47; 44/52 Outer diameter [mm] 148; 149; 150 Subject to typing and calculation errors. Sales are exclusively within the EU countries.

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 220287, NS60E Nakashimada double-pressure press from 2022, like new, cutting length 95 mm, wire cutting 7 mm Chjdpfx Alswiwqxebjb

Condition: used, Year of construction: 1984, functionality: fully functional, thread length: 48 mm, total length: 75 mm, metric thread diameter (min.): 2 mm, metric thread diameter (max.): 6 mm, Ingramatic RP 1 # 451 1984 230-600 pieces Chodpfx Ajy D Ngholbjb 2.5–6 mm Blank length: 4–75 mm Thread length: 48 mm Tool dimensions: 95/85x25x48 Power: 12 kW

Year of construction: 2019, condition: excellent (used), Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber (Special Edition)!! Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 340 liters Description For sale is a used Vötsch ClimeEvent C/340/70/5/S temperature and climate testing chamber from 2019. This unit is a rare special edition with three side-pull-out telescopic test drawers. The test specimens can be conveniently prepared and connected outside the test chamber and then inserted into the test chamber. This makes the system particularly suitable for series testing, development tasks, long-term tests, and applications with frequent sample changes. Each test drawer features a stainless steel grid basket and a separately lockable front with its own test specimen port. The three separate test levels allow for a clear arrangement of several test specimens or assemblies within a single test chamber. The system is equipped, among other things, with WEBSeason Touch control, temperature and humidity control, Donaldson compressed air treatment, and extensive documentation. The system is suitable for: Temperature tests Climate tests Environmental simulation Material testing Electronics testing Component testing Battery testing Sensor testing Quality assurance Research and development Aging and stress tests Technical Data Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Test Chamber Volume: approx. 340 liters Temperature Range: approx. -70 °C to +180 °C Temperature Change Rate: approx. 5 K/min Max. Heat Compensation: approx. 3,000 W Temperature Deviation (time-dependent): ±0.1 to ±0.5 K Temperature Homogeneity (spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Power Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R449A – 2.50 kg Refrigerant 2: R23 – 0.75 kg Max. Low Pressure: 21 bar(g) Max. High Pressure: 25 bar(g) Stand Pressure R23: 13 bar(g) Dimensions External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Test Chamber Dimensions (H x W x D): approx. 750 x 580 x 765 mm Weight: approx. 650 kg Equipment WEBSeason Touch Panel Temperature and Humidity Control Stainless Steel Interior Large Observation Window 3 side-pull-out telescopic test drawers 3 stainless steel grid baskets Separately lockable drawers Heated drawer ports Test specimen ports Donaldson Ultrafilter for compressed air treatment Shipping Information External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Weight: approx. 650 kg Condition Used The unit has been workshop-tested and subjected to a documented test run. The optical condition corresponds to the images. Scope of Supply Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber Chsdpfozp Nv Dex Albeb 3 telescopic test drawers 3 stainless steel grid baskets Donaldson Ultrafilter Accessories according to images Shipping or forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: ready for operation (used), For sale: original Hanomag R35/45. Please submit your offer! Drives well, has no oil leaks, MOT is expired but can be renewed at additional cost. Price negotiable. The vehicle was always stored indoors. Now available for sale. Year of manufacture: 1956, with rare features and a functional Roots blower increasing output to approx. 45 hp. This machine is a technical one-off and is in very good, working condition. Equipment & details: • Type: R35/45 A (agricultural tractor version) • Engine: 4-cylinder diesel engine with mechanically driven Roots blower. Many original stickers and type plates on the machine. Output: approx. 45 hp • Transmission: 5 forward gears + 1 reverse, plus additional reduction (total 10 gears) • Year: 1956 • Rare: Front auxiliary PTO/extra PTO shaft via separate lever • Runs, steers and brakes flawlessly, starts reliably Condition: • Very good overall technical condition • Original appearance with lovely patina • Complete dashboard, inscriptions, lighting, etc. No improvised repairs – all mechanically robust • Ideal as a collector’s item, for vintage meetings or for enthusiasts. Rarity & value: • The Roots blower was only installed in a few models or by Hanomag authorized workshops for power increase. • Such authentic vehicles with working blower and special equipment are extremely rare. Subject to errors. Pictures/description may vary. Chjdpfx Aowvf E Dolbeb

Condition: excellent (used), Year of construction: 2006, EMCO E65 TCM CNC turning machine Technical specifications •Manufacturer: EMCO •Model: E65 •Year of manufacture: 2006 Chedpfezvpqhex Albob •Machine number: R6EU1351 •Control system: Fanuc 0i •Bar diameter: Ø 65 mm •Axes: X / Z / C – 210 / 610 mm / 360° •Tool turret: 12 driven tool stations •Tool holder: VDI 30 Equipment •Bar loader •Chip conveyor •12 driven tool stations •VDI 30 interface Software options •Manual Guide i •Polar interpolation •Cylindrical interpolation •Helical milling

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Working area X-axis: approx. 4,760 mm Y-axis: approx. 1,600 mm Machining units Unit carrier: 2 independently movable Main spindles: 2 Power of main spindles: 15 kW each Tool holder: HSK F63 Drilling heads: 2 Tool changer: 2 x 12-position C-axes: available FLEX-5 preparation: available Vacuum technology Automatically positionable vacuum clamps: available Liquid ring vacuum pumps: available Control system Control system: PC85 / woodWOP MACHINE DETAILS Machine data Manufacturer: HOMAG Model: BOF 712/48/16/AP Machine type: CNC portal machining center with automatic material handling Year of manufacture: 2010 Machine no.: CNC operating time: 17,952.86 h Documented operating hours: 05.10.2023 Condition: used, well-maintained Codpfx Aljzx Anfobshb Original documentation: extensive Handling and return conveying system Manufacturer: HOMAG Machine no.: EQUIPMENT Automatic AP console tables Chip and waste disposal Safety enclosure Associated HOMAG handling and return conveying system Portal handling Vacuum crossbeam Conveying technology

Condition: good (used), functionality: fully functional, Year of construction: 2019, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 350 mm, total length: 9,450 mm, total width: 2,240 mm, total height: 2,520 mm, For sale is a used Bodor P3 fiber laser cutting machine, manufactured in 2019. The machine is in good used condition and is ideal for professional use in metal and sheet metal processing. Bodor P3 Fiber Laser Cutting Machine – Manufactured in 2019 – Used Bodor P3 3D? / Fiber Laser Cutting System – Manufactured in 2019 Technical data: * Model: Bodor P3 * Year of manufacture: 2019 * Working area: 3,048 × 1,524 mm * Max. travel speed: 200 m/min * Max. acceleration: 4.0 G * Z-axis travel: 350 mm * Positioning accuracy: ±0.05 mm/m * Accuracy of repositioning: ±0.02 mm * Dimensions: approx. 9,450 × 2,240 × 2,520 mm Chodpfx Aszylxvslbsb * Table loading station: 3–60 kW, depending on the model The Bodor P3 impresses with its high cutting speed, precise positioning, and generous working area. An interesting machine for sheet metal processing, metalworking, contract manufacturing, and industrial production. Used machine – inspection possible by appointment. Transport, disassembly, and loading can be arranged upon request. Upon request, transport and loading can be organized throughout Europe for an additional fee. Prices exclude VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Code: 0253 Brand: LARI E LARI - ITALY Model: FR 20 - TA - CE Standard Working center for milling and boring on wood or plastic and composite materials, wooden doors, window frames - CE Standard Technical data: X-axis working stroke 3250 mm Y-axis working stroke with 90° cutter 130 mm Z-axis working stroke with 0° cutter 290 mm Z-axis working stroke with 90° cutter 175 mm X-axis working speed mt/min 40 Y-axis working speed mt/min 30 Z-axis working speed mt/min 30 Hinge boring inserting unit: Male/Female Speed control inverter Probe Tool holder collet ER 25 Power of anuba head drilling electric spindle 2,2 Kw Anuba head inclination -10 +90° Electric spindle for milling: 2,7 Hp at 18,000 rpm Collet chuck ER 32 Variable speed via inverter Inclination from 0 to 90° for both vertical and horizontal machining Machine computer: numerical control - Windows XP operating system - color video - alphanumeric keyboard - USB port - interpolation Work table with 3 sliding clamps for locking workpieces Installed power 12 Kw Suction mouth diameter 120 mm Compressed air 7-8 bar Overall dimensions for transport mm 4100 x 1500 x 2100 h Cjdjx A Hdxepfx Albjhb Machine weight 1400 kg Electrical panel 250 kg

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000, with annular spray air Year of manufacture: 2018 Machine type: Salt spray chamber / Climate change testing system Test chamber volume: 1,028 liters Chodpfx Alezqab Tobsb For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray chamber with integrated climate change technology, touch control, and annular spray air system. The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideally suited for testing laboratories, the automotive industry, material testing, research, and quality assurance. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000 Year of manufacture: 2018 Test chamber volume: 1,028 liters Internal dimensions (W × D × H): 1,560 × 645 × 720 mm External dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Power connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical connection: 3P+N+PE 400 Vac 32 A Rated power: 9.4 kW Rated current: 19 A Refrigerant: R134a Refrigerant quantity: 1.30 kg GWP: 1,430 CO₂ equivalent: 1.86 t Max. low pressure: 17 bar(g) Max. high pressure: 25 bar(g) Air-cooled design Ethernet interface Test ranges: Salt spray test: Ambient temperature +5 °C to +50 °C Condensation water test: Ambient temperature +5 °C to +42 °C Climate test: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Humidity range climate test: 20 to 98 % r. F. Humidity range drying / ventilation: < 30 % r. F. Dew point range: +12 °C to +69 °C Consumption data: Water consumption salt spray test: approx. 0.4 l/h Water consumption condensation water test: approx. 34 l Consumption of spray solution: approx. 0.9 l/h Compressed air consumption salt spray test: approx. 1.4 m³/h Compressed air consumption ventilation: approx. 7.0 m³/h Temperature stability: ±1.0 K Equipment: Touchscreen control Annular spray air system Climate change test function according to VDA 621-415 Salt spray test Condensation water test Temperature test Climate test Drying and ventilation function Air-cooled cooling system Ethernet interface Automatic test programs Transport data: Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Used Optical condition as shown in the pictures. Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated touch control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Test Chamber Manufacturer: CTS GmbH Model: T-70/600 Year of manufacture: 10/2018 Machine type: Temperature test chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature test chamber from 2018. This air-cooled, stand-alone unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, and development and stress tests. The stainless steel test chamber has a volume of approximately 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Stand-alone unit, air-cooled Temperature range: -70 °C to +210 °C Temporal temperature stability: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 4.03 K/min Cooling rate: approx. 3.17 K/min CE marking present Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating pressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Internal test chamber (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air using Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door latch Mobile design with rollers Test chamber and condensate drain Workshop inspection: Functional test performed Electrical connection and phase sequence tested Heating and cooling function tested Speed test performed LAN communication and buffer battery tested Inspection seal applied Codpozmqx Ijfx Albjhb Note: This unit is a temperature test chamber. Humidity control is not available. Condition: Used Optical condition as shown in the pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature test chamber Operating manual and technical documentation Test and workshop documents Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder possible. Loading possible with a forklift. Subject to changes, errors and prior sale.

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Testing Chamber Manufacturer: CTS GmbH Model: T-70/600 Machine type: Temperature testing chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature testing chamber from the year 2018. This air-cooled unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, as well as development and stress tests. The stainless steel test chamber has a volume of approx. 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Standalone unit, air-cooled Temperature range: -70 °C to +210 °C Temperature stability over time: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 3.5 K/min Cooling rate: approx. 3.0 K/min CE marking available Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Test chamber internal (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Cedpfxozmrmys Albshb Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air with Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door closure Movable design with rollers Test chamber and condensate drain Note: This unit is a temperature testing chamber. Humidity control is not available. Condition: Used Optical condition according to pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature testing chamber Accessories as shown in the pictures The table shown in the photos as well as other items not explicitly mentioned are not included in the sale. Shipping via freight forwarder is possible. Loading with a forklift is possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2000, WAFIOS FMU 1 Chsdszl T S Ijpfx Albjb Includes: Reel Includes: Tools as shown in the photos The machine is powered and can be inspected by appointment.

Condition: not inspected (used), Year of construction: 2022, load capacity: 2,000 kg, Mobile Portal Crane ABUS LPK IF INTERESTED, FURTHER IDENTICAL CRANES ARE AVAILABLE! Year of Manufacture: 2022 Machine Number: 153-002730 Condition: Uninspected Delivery Terms: Free loading onto truck Location: 21493 Elmenhorst-Lanken Availability: Immediately - by arrangement Payment Terms: Prepayment - by bank transfer Internal No.: 174-2 Technical Data: Crane bridge / crossbeam: approx. 3,280 mm Crane bridge profile height: approx. 240 mm Length of longitudinal beams: approx. 4,600 mm Length of running/foot beams: approx. 1,980 mm Height of running/foot beams incl. rollers: approx. 400 mm Lifting Gear: ABUS Electric Chain Hoist Type: GM 6 2000.3-2 Load capacity: 2,000 kg Lifting speed: 0.80 / 3.00 m/min Csdpszqfn Eofx Albohb Power supply: 400 V / 50 Hz Equipment: Electrically driven chain hoist / load hook (left/right) IF INTERESTED, FURTHER IDENTICAL CRANES ARE AVAILABLE! Scope of delivery: Existing documentation as shown in the images Dimensions & Weights: Installation dimensions L x W x H approx.: 3600 x 2000 x 5000 mm Transport dimensions L x W x H approx.: 4600 x 1500 x 1500 mm Weight approx.: 500 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional Notes: ►Upon request, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: excellent (used), Year of construction: 2006, CNC WORKING LINE FOR DOOR FRAMES, comprising: 1 HORIZONTAL LOADING TRANSFER MOTORIZED, model 0190 T.C Loading buffer with horizontal transversal belts and motorized rollers with variable speed control. 1 gasket insertion unit on a horizontal groove, consisting of: - 2 motorized gasket roll holders - 1 pressure roller insertion unit - 1 cutting unit positioned near the end of the profile 1 cutting/drilling machine for finished cuts, model 01TFRD SPECIAL, referencing the upper workpiece. Suitable for cutting, drilling, milling, and hinge (anuba) insertion on door jambs. MACHINE CONFIGURATION: Worktable constructed of a solid steel frame, with a fixed left section and a movable right section. Electronically controlled positioning system, supporting a total of 6 machining units: 2 on the right, 2 on the left, and 2 on the upper bridge. 1 CENTRAL MOTORIZED SHUTTLE with CNC control for milling the ends of jambs. 1 HORIZONTAL RADIAL CUTTING STATION, 0-45°, quick tilting with selector, featuring 2 groups (one per side). Each side with its own motor, including a timed entry system to prevent double cutting positions. Cutting motor power: 5 HP – 3000 rpm – inverter-controlled. Cutting blade bore: 30 mm. Saw blade diameter: 370 mm. Adjustable extraction hoods and safety guards. 1 HORIZONTAL HEAD DRILLING STATION 0-45°, fast vertical tilt with selector, with 2 groups (right and left). 2 HP motor, 3000 rpm. 7-spindle drilling head with 32 mm pitch. Individually selectable spindles. Groups travel on linear guides for increased speed and drilling accuracy, with longitudinal and vertical adjustment capability. 1 UPPER VERTICAL ROUTING (PANTOGRAPHING) STATION, on a transverse bridge, with 1 motor for counterplate slotting, 2 HP, 12,000/18,000 rpm. Vertical, horizontal, and depth (x-y-z axis) movements are CNC-controlled, utilizing precision linear guides and recirculating ball carriages. Equipped with tool holder collet. 1 HORIZONTAL ANUBA DRILLING STATION, with 1 CNC-positioned motorized unit moving in conjunction with the router. Includes a drilling unit, custom Anuba inserting unit, and custom Anuba feeder with approx. 35 piece capacity (depending on Anuba diameter). 1 LINE CONTROL COMPUTER Capable of importing data (CSV or ASCII) via MMC (Memory Card). Note: The imported data will be used for automatic positioning and execution of processing steps as per the job list. Workpiece dimensions: Chsdoygcmfepfx Albjb Minimum length: 580 mm (45° internal for frame) Maximum length: 3000 mm (45° external for frame) Minimum thickness: 30 mm Maximum thickness: 60 mm Minimum width: 75 mm Maximum width: 300 mm

Condition: good (used), Year of construction: 2011, operating hours: 23,105 h, functionality: fully functional, Soon available Baling press Macpresse MAC 105, pressing force 70 t, year of manufacture 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of manufacture: 2011 Operating hours: as of 09/26: 23,105 Pressing force: 70 t Chedpfx Alezyl Htebsb Drive power: 45 kW Mains voltage: 380 V / 50 Hz Feed opening: 1500 x 750 mm Press chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Tying: 5-strand horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Hopper Note: The press is expected to be dismantled in mid/late September and can be inspected in operation until then, if desired. The conveyor belt shown in the photos is not included in the scope of delivery and can be purchased as an option. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, prior sale is reserved, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Year of construction: 2016, condition: excellent (used), Vötsch VCS³ 7034-5 Climate Testing Chamber / Temperature and Humidity Testing Chamber Chjdpfx Ajzqmx Eolbeb Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Year of Manufacture: 2016 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 335 liters For sale is a used Vötsch VCS³ 7034-5 climate testing chamber with temperature and humidity control, programmable touch panel control, and water-cooled design. This unit is suitable for professional temperature and climate tests, humidity tests, environmental simulations, material tests, electronics and component tests, as well as for research, development, and quality assurance. Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Year of Manufacture: 2016 Temperature Range: -70 °C to +180 °C Humidity Control: included Water-cooled Design Operating Hours: approx. 3,485 h Test Chamber Volume: approx. 335 liters Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R404A, 2.50 kg Refrigerant 2: R23, 0.75 kg Equipment: Programmable Touch Panel Control Temperature Control Humidity Control Water-cooled Design Stainless Steel Interior Large Observation Window Test Chamber Lighting Separate Digital Temperature and Humidity Display Several Stainless Steel Inserts in the Test Chamber Program and Manual Operation Specimen Feedthrough Ø 125 mm Additional Specimen Feedthrough Ø 50 mm Front Main Switch Electrical Connection with approx. 3.5 m Connection Cable Connection for Condensate Drain / Overflow Cooling Water Connection Connection for Demineralized Water Compressed Air Connection Dimensions: External Dimensions (W x D x H): approx. 872 x 1,758 x 1,800 mm Internal Dimensions (W x D x H): approx. 580 x 765 x 750 mm Weight: approx. 585 kg Transport Data: Dimensions (W x D x H): approx. 872 x 1,758 x 1,800 mm Transport Weight: approx. 585 kg Condition: Used Optical condition as shown in the pictures. Scope of Supply: Vötsch VCS³ 7034-5 Climate Testing Chamber Programmable Touch Panel Stainless Steel Inserts as shown in the pictures Accessories as shown in the pictures Availability: by arrangement. Scope of supply as pictured. Subject to changes, errors and prior sale.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, workpiece length (max.): 4,200 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS DIMENSIONS OF LOG PACKAGES Log packages to be cut, maximum length: 4,200 mm Log packages to be cut, minimum length: 2,500 mm Log packages to be cut, maximum width: 1,200 mm Log packages to be cut, maximum height: 1,200 mm Log packages after cutting, maximum length: 4,000 mm Log packages after cutting, minimum length: 700 mm Remaining cuts (waste), maximum length: 300 mm MACHINE DETAILS MACHINE DATA Machine type: ES 121 SHK 4 m Year of manufacture: 2023 Operating voltage: 400 V Mains frequency: 50 Hz Chodpfx Alezwt T Ajbsb EQUIPMENT Saw chain, article number 10004788, length 1,900 mm Guide rail, article number 11003322, length 1,900 mm Operating manual, article number 50002270

Condition: excellent (used), functionality: fully functional, Large fully hydraulic EISELE: Weight approx. 0.75 t, saw blade 440 mm Speeds: 12.5 / 25 rpm Motor power: 2.6 / 3.2 kW Chsdezpfgrspfx Albeb Hydraulic saw feed Hydraulic vice Cutting ranges: 200 x 100 mm (square tube) Mitre cut one-sided 45°.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: W09368333J2D38007, conveyor belt length: 8,500 mm, conveyor belt speed: 2,000 mm/s, conveyor belt width: 1,200 mm, roller length: 3,000 mm, number of rollers: 1, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Conveyor belt Width: 1,200 mm Length: 8,500 mm Belt speed: 2.0 m/s Discharge height: 5,050 mm Hopper Loading height: 3,307 mm Roller Number of rollers: 1 Roller length: 3,000 mm Maximum roller speed: 32 rpm Permissible total weight: 33,000 kg MACHINE DETAILS Dimensions & Weight Working dimensions (L x W x H): 16,786 x 2,500 x 5,050 mm Transport dimensions (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Cjdpfxjzuyuue Albjhb Drive Engine type: Diesel engine Manufacturer: MTU 6R 1300 Emission standard: Stage V Rated power: 390 kW / 530 hp Fuel tank capacity: 950 l Operating hours: 5,000 h EQUIPMENT Overband magnet

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: AA1/015315, functionality: fully functional, planing width: 240 mm, number of spindles: 8, working height: 140 mm, TECHNICAL DETAILS Max. planing width: 240 mm Max. planing height: 140 mm Infeed table length: 2,500 mm Feed drive: Cardan drive Lubrication system: Automatic Diameter of planing shaft: 40 mm Spindles Number of spindles: 8 pcs. Spindle 1 Chodpfozxcfdsx Albsb Spindle type: Bottom Tool available: Yes Spindle 2 Spindle type: Right Tool available: Yes Spindle 3 Spindle type: Left Motor power: 15 kW Tool available: Yes Spindle 4 Spindle type: Right Motor power: 11 kW Tool available: Yes Spindle 5 Spindle type: Left Motor power: 11 kW Tool available: Yes Spindle 6 Spindle type: Top Motor power: 15 kW Tool available: Yes Spindle 7 Spindle type: Top Motor power: 11 kW Tool available: Yes Spindle 8 Spindle type: Bottom Motor power: 11 kW Tool available: Yes Feed system Manufacturer: H&M Max. infeed length: 250 mm Discharge system Manufacturer: H&M Max. discharge length: 760 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 20,000 x 2,400 x 2,200 mm Unladen weight: 6,000 kg Number of transport packages: 8 pcs. EQUIPMENT Tools for all 8 spindles Automatic lubrication system Electrical wiring diagrams Technical data Documentation CE marking

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV Year of manufacture: 06/2008 Range of components: Steel, cast and welded structures. The large X-axis and the head, which can be swivelled through 105° in either direction, are ideal for multi-sided machining of long profiles or shafts. The machine can be inspected under power by appointment. Condition: In working order / ready for use. TECHNICAL SPECIFICATIONS Travels: - X-axis: 3.000 mm - Y-axis: 800 mm - Z-axis: 1.100 mm - A-axis: +/- 105° - B-axis: 360° - 1-axis NC swivel head, swivels through +/- 105 degrees - Speed range: 20 - 9.000 rpm - Drive power of motor spindle increased: 30 kW * Torque max.: 190 Nm * Boring capacity in steel: ca. 60 mm * Milling capacity: approx. 500 cm3 * Thread cutting: M30 SPECIFICATIONS: - CNC control system: HEIDENHAIN iTNC 530 - NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800 * Horizontal faceplate,diameter: 800 mm * Direct measurement system for the NC rotary table * Part accuracy: : +/- 12" * Load capacity max.: 2,5 tons * Tangential torque with clamping: max. 6.500 Nm, incl. motor (AC) with integrated rotary measuring system, hydraulic clamping and incl. additional CNC axis - Clamping plate: Width / length: 835 / 3.500 mm Number of T-slots: 7 Slot width: 18-H8 - Amperemeter for the main spindle drive - Tool magazine: 48 positions - Additional tool magazine: 48 positions, including tool changer, specialised software and control panel for loading tools whilst the machine is running in automatic mode - Working area: * Rapid speed: 30 m/min * Feed rate: 30.000 mm/min - Spindle: * Cone/tool holder: SK40, DIN 69871 * Rotational speed: 9.000 / 30 kW - Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l) - High coolant pressure at the external nozzles High-pressure coolant pump, switchable via the M function in the parts Chsdpfx Aszyy Rmjlbob programme to the external nozzles on the headstock, 20 bar. - Coolant supply flow monitor - Compressed air through the tool - Centralised oil lubrication - Oil mist extraction system - Direct measurement system: X, Y and Z axes - 3D measuring probe, brand: RENISHAW RMP 60, with radio signal transmission for control, including control software - Tool breakage detection - Tool length measurement - Fully enclosed work area with a roof; a completely enclosed work area. The loading doors are designed in such a way that loading by crane is possible at any time whilst they are open. - Safety fence fitted to the machine - Stronger linear guides for the Y-axis = 800 mm X = size 65, Y + Z = size 55 - Bellows with steel vanes - Rinsing gun - Electronic handwheel (portable), brand: HEIDENHAIN HR 410 - Chip conveyor - Workstation lighting (2-light) - Documentation - CE marking Special features: - Zero-point clamping system - Swiveling head - The CNC rotary table, in combination with the swivel head, enables 5-sided or 3D machining of workpieces Clamping devices are not included in the sale. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 394F00438, Year of construction: 2015, operating hours: 9,935 h, load capacity: 5,000 kg, lifting height: 4,354 mm, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 4,354 mm Mast height: 3,050 mm Fork length: 1,200 mm Fork width, maximum: 1,260 mm Fork width, minimum: 330 mm MACHINE DETAILS Mast type: Duplex Number of wheels: 4 Fuel type: Diesel Engine manufacturer: Linde Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,190 x 3,050 mm Unladen weight: 6,655 kg Operating hours: 9,935 h EQUIPMENT Chodpfx Aezxci Aelbob Side shifter Joystick Work light Documentation CE marking

Year of construction: 2023, condition: excellent (used), machine/vehicle number: 0293, We are selling the test bench from the aircraft manufacturing sector. Codpfeyl S Eujx Albjhb