Used Cable Ties for sale (3,780)

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Prodpjyzr Nmsfx Ahcoa Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: excellent (used), The device performed only 140 measurements. NITON XL3t 980 GOLDD+ – a portable X-ray analyzer with a next-generation SDD detector featuring GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral databases for alloys enables the identification of stainless steels, tool steels, chromium-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, and zinc, zirconium, and aluminum alloys. The analyzer provides very fast measurement. The analysis time for typical alloys is less than 3 seconds. An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys such as: cast alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, magnesium alloys (Mg), zinc alloys with aluminum (Al). The analyzer enables the analysis of: all iron-based alloys (0.00x% – 100%) and non-ferrous metal-based alloys (0.00x% – 100%) and rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x%-100%). The NITON XL3t 980 GOLDD+ analyzer operates based on BASIC PARAMETERS, meaning that it calculates the percentage content of elements based on a mathematical equation. The analyzer also allows for the development of its own analytical programs: an identification program that assigns a name, symbol, number, etc., to a known sample, and such samples will be identified by that name. a program for quantitative chemical analysis (SuperChem Teach Mode) – based on its own standards, we create our own calibration curves for quantitative analysis. Pjdpozlccijfx Ahcjra The analyzer has a large, user-friendly, touch-screen display. The screen is color and tiltable, which facilitates reading the results during field work. It includes an integrated scanner and backlit alphanumeric sample identification codes. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. It is supplied with two interchangeable batteries. One battery enables continuous operation for 8-10 hours without the need to recharge. It has two libraries, 900 and 800.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AFMAAAABABAA+, The Coriolis Mass Flowmeter Proline Promass 83F, manufactured by Promass in 2011, is a precision instrument designed for accurate mass flow measurements in various industrial processes. This model, designated as 83F1H-3967/0 with serial number E710E302000, has a nominal size of DN100 (4 inches) and is equipped with a hygienic process connection DN100 DIN 11851, making it suitable for applications requiring sanitary standards, such as dairy processing. Constructed from high-grade stainless steels 1.4404/316L and 1.4539/904L, the device offers durability and corrosion resistance. It is rated for a nominal pressure (pnom) of 25 bar and operates in a process temperature range from -50°C to +200°C, with an ambient temperature tolerance from -20°C to +60°C. The flowmeter's housing features IP67 and NEMA/Type 4X protection ratings, ensuring resistance to dust and immersion in water. Sensor calibration includes a K factor of 1.6287 / 51 and a density accuracy of 0.0005 g/cc. The surface finish meets hygienic standards, featuring a roughness of 0.8 µm (150 grit). The unit is powered by a voltage range of 20-55 VAC or 16-62 VDC, consuming 15 VA/W at a frequency of 50-60 Hz. The housing shows some surface wear and minor dents, and the label exhibits slight wear but remains mostly legible. It is mounted on a wooden pallet and is equipped with attached braided cables with yellow markings and black cable ties. Some dust accumulation is visible on the flowmeter body, indicative of prior use. Prsdpey Anhzofx Ahcea This Promass 83F flowmeter is suitable for precision mass flow measurement in the pharmaceutical, chemical, and food industries, particularly where hygienic conditions are required.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, number of spindles: 2, spindle speed (max.): 4,500 rpm, turning length: 145 mm, turning diameter: 240 mm, travel distance X-axis: 130 mm, travel distance Z-axis: 145 mm, Horizontal, twin-spindle CNC lathe with 2 turrets in two working areas and 2 loading portals! The machine underwent an overhaul in 2023! TECHNICAL DETAILS Turning diameter max.: 240 mm Turning length max.: 145 mm Travel X-axis: 130 mm Travel Z-axis: 145 mm Distance between spindles: 340 mm Rapid traverse X/Z-axis: 24 m/min Guidance X-axis: Roller linear guide Guidance Z-axis: Round guide, 145 mm Number of spindles: 2 Spindle drive power: 11 / 7.5 kW Max. spindle speed: 4,500 rpm Torque: 93 Nm Spindle nose: JIS A2-5 Chuck size: 210 mm (8 inches) Number of turrets: 2 Turret type: BT turret Tool positions per turret: 8 Shank size for external turning tools: 20 × 20 mm Max. shank diameter for boring bars: 40 mm MACHINE DETAILS Control: Fanuc 32i-B Working areas: 2 Power connection: 30 kVA Dimensions & Weight Footprint: 4,500 × 2,440 mm Overall height with loader: 2,550 mm Weight: 4,400 kg Loading portal GT Twin with two independent portals Dual gripper for raw and finished parts Turning station Control unit with cable Max. workpiece diameter: 120 mm Max. workpiece length: 80 mm Max. workpiece weight: 3 kg EQUIPMENT Stack magazine, on the left side Parts conveyor belt, on the right side Chip conveyor, on the rear side Coolant tank Prsdpfxeztxlcj Ahcoa Coolant supply through both spindles for flushing the clamping devices Various tool holders Various clamping devices Documentation and wiring diagrams

Year of construction: 2022, operating hours: 15 h, condition: used, functionality: fully functional, operation weight: 30 kg, feed force X-axis: 20,000 N, pipe diameter (max.): 14 mm, machine/vehicle number: 79000, Lancier Smart Wheel 2022, used very little Very few operating hours (approx. 38 hours) Includes extensive accessories Includes HONDA EU22i generator Includes cable guiding set 2.6 mm - 3.7 mm Includes cable guiding set 6.7 mm - 9.0 mm Includes drive wheel set without groove 0.8 - 3.4 mm Includes drive wheel set with groove 3.5 - 9.0 mm Includes steel transport box Includes compressed air hose with claw coupling, 10 m The blowing device Pjdpfszphdtsx Ahcjra Automatic logging For cable diameter 1.5 - 9 mm For outer pipe diameter 7 - 14 mm Blowing speed 0 - 100 m/min Thrust force 20 daN L x W x H 500 x 400 x 400 mm Weight: approx. 30 kg Order no. 79000

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: DN1771/1789/1791, 1x Abus VS column-mounted slewing crane, capacity 500 KG There are 3 identical cranes available. Load capacity at full outreach: 500 KG / 0.5 tons Height: approx. 3.6m Upper carriage outreach: approx. 3.42m Outreach: approx. 2.5m Hook height: approx. 3m Total weight: approx. 350 Kg Includes Abus chain hoist with floor control (2 lifting speeds) with slewing and trolley drive Connection to 400V 16A, slewing range 360° Crane is disassembled and immediately available. The gripper is not included! Predpfxjzv Hy Te Ahcsa Item location is 75053 Gondelsheim. Only the crane system shown in the pictures is being sold. Very good condition, see pictures. Shipping via freight forwarder or collection by arrangement.

Year of construction: 2009, condition: used, Complete cable recycling plant for sale – including MG Recycling Compact 220T (in excellent condition) For sale is a complete cable recycling plant (dry process) for the efficient recovery of copper from cables. ⭐ Core component of the plant: MG Recycling Compact 220T (year of manufacture 2009) * Industrial compact system for separating copper, aluminum, and plastic * Capacity: up to 400 kg/h * Power consumption: approx. 37 kW * High-quality granulation & separation * Very robust design (approx. 3.2 t machine weight) ➡️ Proven system for cable recycling with high purity and reliable continuous operation. ⸻ ⚙️ Other components of the plant: Pedpfx Ajzgx H Hjhcjra * Large screening system (TST – separation & sorting technology) * Additional separation table for post-separation * Various conveyor belts & screw conveyors * Large two-shaft shredder for pre-shredding * Cable stripping machine The components from TST are specifically designed for industrial separation and screening processes and enable very precise classification and purification of materials. ⸻ Performance data of the complete plant: * Throughput: approx. 200–300 kg of cable per hour (realistic in operation) * Recovery: up to 99% copper content * Process: completely dry (no water, no sludge) * Ideal for: * Copper cables * Electronic scrap * mixed cable batches ➡️ Very efficient post-processing through additional screening and separation tables → maximum yield! —————- Special features: * Completely coordinated production line – ready for immediate use * Expandable / modular design * Perfect for commercial cable recyclers & recycling companies * Energy-efficient separation technology without wastewater —————- Condition & sale: * Plant is in good condition and currently in operation * Sale due to operational restructuring * Inspection possible by appointment —————- Price: Negotiable – realistic offers welcome

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 7525SE-0949-FA, measuring range X-axis: 2,600 mm, number of axes: 7, TECHNICAL DETAILS Axes: 7 Measuring range: 2.6 m Accuracy Acceptance temperature: 20 °C Humidity during acceptance: 50 % Permissible single-point deviation: 0.028 mm Determined single-point deviation: 0.010 mm Maximum permissible volumetric length measuring deviation: ± 0.039 mm Determined volumetric length measuring deviation: -0.018 mm Scanner Manufacturer: Hexagon Model: CMS108 Integration: Calibrated within the measuring arm Note: Can be used on the measuring arm with appropriate scanning software Prodpfszv Rhujx Ahcja Note: Scanning software not included in the scope of delivery MACHINE DETAILS Design: Portable measuring system Weight of measuring system including transport case: approx. 40 kg External dimensions of transport case for measuring arm: approx. 1,350 x 550 x 350 mm Dimensions of tripod: approx. 750 x 750 x 750 mm Weight of tripod: approx. 75 kg Dimensions of scanner case: approx. 600 x 450 x 220 mm Weight of scanner including carrying case: approx. 6 kg Notebook size: 17 inches Note: The measuring arm was relabeled before the last calibration. EQUIPMENT - Hexagon ROMER Absolute Arm RA-7525SE measuring arm, 7-axis - Mobility Pack FP2-1503-FA with wireless computer connection - Transport case for measuring arm - Magnetic base - Test bar, length 700 mm - Test sphere, diameter 25 mm - Probe box with 3 probes - Probe with ruby ball, diameter 6 mm - Probe with ruby ball, diameter 3 mm - Calibration sphere, diameter 15 mm - Dust cover - Complete cable set - Calibration certificate for measuring arm, notebook Dell M6600 - PowerInspect 11 software including hardware dongle - Hexagon RDS software - Brunson 231 roll stand, height-adjustable - Height adjustment range of tripod: approx. 700 to 1,100 mm - Scanner Hexagon CMS108 - Carrying case for scanner - Calibration certificate for scanner Note: PowerInspect 11 is exclusively for tactile measurements and cannot be linked with a scanner. Note for packaging request: €250 for special pallet with cardboard construction and tripod on a Euro pallet.

Condition: good (used), For sale are 2 identical helical conveyors/sorting systems: 1 with sound-dampened cladding. Bowl diameter: 820 cm Bowl depth: 36 cm Dimensions: Without cabin: 125 x 158 x 135 With cabin: 125 x 158 x 128 The cabin has several access doors. Various holders for quick-assembly screws were sorted (cable ties are also likely possible). The helical conveyors are functional, and the control systems for each machine are available. The machines can be inspected and/or tested by arrangement. Machine purchase/sale: BUYING/SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Prjdpfx Ahehrntmocsa Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: ready for operation (used), functionality: fully functional, total length: 15,900 mm, load capacity: 5,000 kg, arm reach: 15,500 mm, TECHNICAL DETAILS Load capacity: 5,000 kg Span: 15,500 mm MACHINE DETAILS Podpfx Aozuw Dyjhcsra Dimensions & Weight Dimensions (L x W x H): 15,900 x 2,000 x 2,000 mm Unladen weight: 3,500 kg Shipping packages: 3 units EQUIPMENT Fixed cable control The crane has already been disassembled.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, total height: 1,520 mm, total width: 1,000 mm, total length: 1,800 mm, overall weight: 700 kg, Cable stripping machine Pecher PR3 Evolution Podozry Eujpfx Ahcsra Completely overhauled in 2026. Condition: as new. Motor power: 4 kW / 380 V Stripping speed: 44 m/min Working range: 1.5 mm² – 90 mm Ø Weight: approx. 700 kg Dimensions: W 1000 x L 1600 x H 1520 mm

Condition: excellent (used), Year of construction: 2010, operating hours: 2,125 h, functionality: fully functional, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Type: Matrix400 Complete cable granulation line Condition: Very good – In perfect working order Availability: Immediate Technical description: Cable granulation line including: • Pre-shredder, completely overhauled recently o All rotor bearings are new o Gearbox bearings are new • Conveyor with magnetic rollers for scrap separation • Metering hopper • Feeding conveyor • Blade mill with 3 / 4 / 5 mm sizing screens • Separation by cyclone and zig-zag separator • Finishing turbo • Density separation table • Dust extraction with bag filter Spare parts: • Pre-shredder: 1 set of knives + counter knives Pedpex It N Ujfx Ahcera • Blade mill: 3 sets of blades and counter blades Capacity: ≈ 200 kg/h of finished product Application: Processing and recycling of copper cables Price: €95,000 (Complete processing line) Spare parts: €20,000 Additional information: • Photos and further information available upon request 📩 Contact us for more information.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: DN175501, 1x Abus VS column-mounted swivel crane, NL 500 KG Load capacity at full extension: 500 KG / 0.5 tonnes Height: approx. 4 m (including base: 0.35 m) Outrigger length: approx. 3.7 m Reach: approx. 3.5 m Hook height: approx. 3.3 m Total weight: approx. 450 kg Including Abus chain hoist with floor control (2 lifting speeds) Predpfx Ahjzv Hytjcea with swivel and trolley drive Connection to 400V, 16A, swivel range 360° Crane is disassembled and immediately available The gripper is not included! Item location: 75053 Gondelsheim Only the crane system shown in the pictures is sold. Very good condition, see pictures Shipping by freight forwarder or collection by appointment.

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, We are offering this refurbished MG Recycling M_04772 cable granulator, manufactured in 2006. It underwent a major overhaul in 2024. New switchgear control cabinet, new knife sets. Wagner pre-shredder, type WS 15, manufactured in 2007, 15 kW. Feed conveyor, extraction system, and magnetic vibrating table, manufactured in 2021. Output: approximately 150 - 180 kg/hour, depending on the material. Location: Switzerland, 8260 Stein am Rhein. Asking price: EUR 59,000 (negotiable) If you have any questions or require further information, please feel free to send us a message or call us. Pedpfey D Ug Tjx Ahcora

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, power: 37.5 kW (50.99 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 500 t, stroke length: 400 mm, operating speed: 7 mm/s, reverse speed: 60 mm/s, table width: 530 mm, table length: 4,100 mm, throat depth: 500 mm, distance table to ram: 890 mm, overall weight: 42,000 kg, - Heavy-duty press brake > 300-ton capacity per meter > ideal for high-strength alloy steels - 6 axes: Y1 / Y2 / X / R / Z / V - The upper ram has an extension (horn) of 500 mm > total bending length of 4,100 mm - Hydraulic upper tool clamping - Capable of conical bending! - Akas laser safety system - CNC crowning - Equipped with a V-Matic variable bending die (CNC control); from V40 to a maximum of V160 - The machine is floor-mounted; no foundation is required - Included: a large set of heavy-duty tooling for highly alloyed steels! - The tools are stored in a mobile cart that can be attached to the machine. The operator can then install and remove the upper and lower punches and dies manually. Brand: HACO Model: ERM 36500 1 unit in total Bending capacity: 500 tons x 4100 mm (bending length) Electrical supply: 380V Robosoft numerical control (Macon, 4 axes, proportional valve amplifier, integrated by Muritech) Siemens S7 PLC Invertek Optidrive CP frequency inverters Baumüller servo amplifiers Motorized multi-axis back gauge with cable carrier chain Safety: Type 4 DSP Laser non-material light curtain (transmitter/receiver), CE certified Dell control screen Supplied with a large set of tooling: V-dies of various lengths, radii, and openings Work table with roller conveyors for sheet metal handling Machine is stationary, not tested under power - on-site inspection recommended before bidding Reinforced version: ram designed to support a load of 300 tons per meter Special CNC-controlled variable V-die (V40 to V160) Prjdozw I N Sspfx Ahcja Hydraulic clamping at the top CNC crowning Press equipped with a 500 mm horn User-friendly control via 2D touchscreen, Thurei 02E version 2025 software 2 custom-made tool carts for storing bending tools, designed for tool changes Dismantling/removal: must be carried out by a specialized company No suitable lifting equipment available on site Logistical visit essential before removal Serial number: 81599 Sale due to bankruptcy

Condition: like new (used), Year of construction: 2022, operating hours: 7 h, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 3 W, type of cooling: air, total width: 300 mm, total height: 125 mm, total length: 330 mm, working range: 300 mm, overall weight: 44 kg, scan area length: 330 mm, scan area width: 330 mm, travel distance X-axis: 330 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 42 mm, input current: 4 A, laser wavelength: 355 nm, path measurement accuracy: 5 mm, ambient temperature (max.): 40 °C, input frequency: 50 Hz, Equipment: documentation/manual, KEYENCE MD-U1020C – 3-Axis UV Laser Marker (wide marking area) 3 identical units available. Built July 2022, delivered new in 2023, only 7 operating hours each. Practically as new, tested and fully functional. DELIVERY AND ON-SITE FUNCTION TEST – INCLUDED IN THE PRICE We deliver personally to your address anywhere in the EU/EEA, by van. No pallet, no freight terminals, no forwarder handling of the sensitive optics – direct door to door. On arrival the system is connected, powered up and a test marking is produced in your presence before handover. You take delivery of a machine you have seen running at your own site, not a crate on a pallet. Scope of the on-site test: connection, power-up and test marking with the supplied system. Integration into an existing production line, fixtures, tooling and application programming are not included, but can be quoted separately. Collection ex works in Örebro, Sweden is of course also possible. SCOPE OF SUPPLY (per unit) - MD-U1020C marking head, 355 nm UV, 18.0 kg, IP64 - MC-P1 controller unit, 23.5 kg - Operating console, 2.0 kg - Connecting cables, 4.3 m TECHNICAL DATA - Laser medium: YVO4, wavelength 355 nm (UV), laser class 4 - Laser power: 3 W at 40 kHz (2.5 W at the focal point) - Marking area: 330 x 330 x 42 mm (true 3-axis control, wide-area type) - Standard working distance: 300 mm - Marking resolution: 5 µm - Max. scanning speed: 8,000 mm/s - Digital galvo scanner with linear motor drive, built-in power meter - Interfaces: RS-232C, USB 2.0, Ethernet (10BASE-T / 100BASE-TX) - Power supply: 100–240 V AC ±10 %, 50/60 Hz, max. 800 VA (approx. 250 W average) - Cooling: forced air – no external chiller required - Ambient temperature: 0 to +40 °C - Weights: head 18.0 kg / controller 23.5 kg / console 2.0 kg APPLICATION The 355 nm UV wavelength marks heat-sensitive materials without thermal damage ("cold marking"): plastics and resins, glass, ceramics, films, PCBs, medical devices, connectors and nameplates. High-contrast, permanent, legible codes and logos with minimal material stress. Predjzw U T Rjpfx Ahcsa COMMERCIAL Price is per unit, net, delivered. Units can be sold individually or as a package of three. Inspection and test marking under power is also possible by appointment at our location in Örebro, Sweden before purchase. Please contact us for photos, serial numbers and further details.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: DN3400, 1x Abus VS pillar slewing crane, model NL 500 KG Prsdpozvrl Iofx Ahcoa Load capacity at full extension: 500 KG / 0.5 tons Height: approx. 3.6 m, upper arm length: approx. 3.4 m Reach: approx. 2.5 m, hook height: approx. 3 m Total weight: approx. 450 kg Includes Abus chain hoist (year of manufacture 2019) with floor control (2 lifting speeds) with slewing and trolley drive Connection: 400V, 16A, slewing range: 360° Crane is dismantled and immediately available Item location: 75053 Gondelsheim Only the crane system shown in the pictures is being sold. Very good condition, almost like new. See pictures. Shipping via freight forwarder or collection by appointment.

Condition: good (used), Cable rack for large cable reels Consisting of 7 uprights Depth: 0.81 m Bays: 0.75 + 0.75 + 0.855 + 0.855 + 0.945 + 1.05 + 1.05 m width – upright width: 8 x 0.10 m Pedpfx Aoy I U Tbshcera Height: 5.06 m

Condition: used, mileage: 56,060 km, power: 120 kW (163.15 HP), first registration: 06/2016, overall weight: 5,000 kg, color: white, next inspection (TÜV): 10/2026, gearing type: mechanical, emission class: euro6, total length: 6,961 mm, total width: 1,993 mm, total height: 2,850 mm, number of seats: 2, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any warranty, we can offer you the following vehicle, subject to finalization, errors, typos, and prior sale: Mercedes Benz Sprinter 516 CDI Maxi, long and high, sewer inspection vehicle (Vehicle 1) Registration date: 05/21/2018 56,060 km Engine: 2,143 cc 120 kW / 163 hp Euro 6, C, M, N Permissible gross vehicle weight: 5,000 kg Unladen weight: 4,125 kg (with contents/equipment) Payload: 875 kg Overall length: 6,961 mm x Overall width: 1,993 mm x Overall height: 2,850 mm Tires: 205/75R16C, front approx. 70/40%, rear approx. 50/50% (twin tires) 1 rotating beacon at the front and rear Double doors at the rear, sliding door on the passenger side Central locking with remote control 2 seats in the front 2 electric windows, mirrors, heated mirrors Power steering Radio Hands-free telephone system 6-speed manual transmission Rearview camera Without partition Bench seat behind the driver's seats as a workbench Office area on the driver's side with cabinet, cabinet on the passenger side at the rear before the partition Partition Roof-mounted air conditioning, auxiliary heater Rear awning, foldable Manual roof panel for opening at the top of the roof Price: €21,000.00 (net) Additional equipment for sewer camera vehicles (would then remain on board): €9,500.00 (net), total: €29,500.00 (net) Complete with camera systems, hoses, monitors, large battery pack 5PzV 275 Ah 48 Volt under the bench seat (2nd row of seats), cameras, cable routing in the rear for camera sewer inspection, Abus crane, etc. All information is provided without any warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties, up to a dispute value of €10,000.00, is the district court of Ludwigslust; for dispute values exceeding this amount, it is the regional court of Schwerin. Errors, typos, and prior sale are subject to change. Prjdpfozxam Ejx Ahcja

Year of construction: 2011, operating hours: 2,600 h, condition: used, functionality: fully functional, Cable granulator for processing cable scrap Shredder + WS15 granulator + belts Technical data Throughput depends on material and screen, max. 500 kg/h Operating hours approx. 2600 h Total weight 5.7 t Height 2.75 m Width 7.9 m Depth 10.1 m Power consumption 58 kW at full load Power consumption 42 kW at idle Connection 400 V/550 Hz (fuse rating 125 A + 80 A slow-blow) The system is assembled (demo unit) and can be inspected and demonstrated on site. System overview Prodeza Ahcepfx Ahcja 1x ICS CONTECT Pre-shredder Carrera-6D.LN WS15 1x ICS CONTECT Radial fan MGTN7 1x ICS CONTECT Shredder 40/60 VGA 1x ICS CONTECT Separation table DK 20.II 1x ICS CONTECT Mobile extraction system U-3000 1x ICS CONTECT Conveyor belt bg GBF 1x Föratec Lifting and tilting device (not installed) 1x Ventilation system with various ducts (not installed) - Spare blades for shredder available

Condition: not inspected (used), Welding Technology Complete Package – Kemppi, Artec & Kemper MIG/MAG, TIG and electrode welding / Welding fume extraction / Oxy-fuel welding For sale is a comprehensive used welding technology complete package for professional workshop and industrial use. It includes welding machines for MIG/MAG, TIG and electrode welding, wire feeder, welding fume extraction and oxy-fuel / flame cutting equipment. Technical data: Kemppi RA 450 W MIG/MAG welding power source Manufacturer: Kemppi, Finland Model: RA 450 W Serial number: 6224531 Welding process: MIG/MAG Welding current range: 40–450 A 450 A / 36.5 V at 45% duty cycle 400 A / 34.0 V at 60% duty cycle 310 A / 29.5 V at 100% duty cycle Mains connection: 380 V / 50 Hz / 3-phase Integrated water cooling Mobile industrial design Kemppi FU 20 wire feeder Manufacturer: Kemppi, Finland Model: FU 20 Device type: MIG/MAG wire feeder Wire feed speed: stepless 0–18 m/min 2-cycle/4-cycle operation Suitable for Kemppi RA 450 W Artec TIG 250 AC/DC TIG welding machine Manufacturer: Artec / W-TEC Schweißtechnik GmbH, Bochum Model: TIG 250 AC/DC Factory number: 00301991 Welding process: WIG/TIG AC/DC Welding current range: 6–260 A 250 A at 60% duty cycle / 200 A at 100% duty cycle Open circuit voltage: 68 V Mains connection: 380 V / 50 Hz Power consumption: 14 kVA Protection class: IP23 AC/DC and pulse operation Water-cooled TIG torch with hose pack Mobile industrial design Artec GL 320 welding machine Manufacturer: Artec Model: GL 320 Welding current: up to 320 A Stepless welding current adjustment Adjustable arc dynamics Remote control connection Three-phase connection Mobile industrial design Kemper welding fume extraction unit Type 91510 Manufacturer: Kemper GmbH, Vreden Type: 91510 Machine number: 8708418 Device type: mobile welding fume extraction / filter unit Airflow rate: 1,200 m³/h Static pressure: 145 mm WS Power: 0.75 kW Rated current: 2.0 A Connection: 380 V / three-phase With two extraction hoses/arms and extraction hoods Mobile cutting / oxy-fuel flame cutting carriage Manufacturer / Type: not identifiable For oxy-fuel flame cutting and welding Design for oxygen and fuel gas Robust two-wheeled industrial design With hand cutting torch, pressure regulators / gauges and oxygen and fuel gas hoses Equipment / Scope of delivery: Kemppi RA 450 W Kemppi FU 20 wire feeder Artec TIG 250 AC/DC Artec GL 320 Kemper Type 91510 welding fume extraction unit Mobile cutting / torch carriage Oxy-fuel welding and flame cutting equipment TIG torch and hose pack MIG/MAG hose and connection packs Hand cutting torch Pressure regulators / gauges Oxygen / fuel gas hoses Connection and welding cables Further accessories as shown in the pictures Condition: Used. Optical condition as shown in the pictures. Normal age-related signs of wear are present. All machines, devices and accessories are offered in their existing condition. No functional test has been performed. The devices are explicitly understood to be untested. Pjdozwfppepfx Ahcsra Items not explicitly mentioned or only shown in the background are not part of the sale. Shipping by freight forwarder possible. Changes, errors and prior sale reserved. We will be happy to answer any further questions by telephone.

Condition: used, axle configuration: 1 axle, Year of construction: 1977, VAT/margin: VAT qualifying Podpfx Aozbmgxehcsra

Condition: new, Bauer & Böcker cable management magnet, 43mm, flat gripper with neodymium magnet in rubber, for cable assembly with reusable cable ties, unused, 100% functional, scope of delivery as shown in the photos. Pedpjkk A Urofx Ahcera

Year of construction: 2005, condition: ready for operation (used), Three cable processing machines from a complete extrusion line are available. 1) Spindle pay-off Ka-Be-Ma AS400, spool flange diameter range: 140mm-400mm, min. core diameter: 90mm, max. spool width: 300mm, max. spool weight: 50kg, conductor diameter range: 0.1mm-1mm, max. pay-off speed: 600m/min, tensile force: 0.5N-20N, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 1000kg. 2) Cooling section Ka-Be-Ma T-KW-UKW-A-1,5, Zone 1: Process: immersion cooling, temperature range: 70°C-80°C, length: 2000mm. Zone 2: Process: spray cooling/deflection section, temperature: approx. 25°C. 3) Dual take-up Ka-Be-Ma DWST400-1, spool flange diameter range: 305mm-400mm, min. core diameter: 156mm, max. spool width: 282mm, conductor diameter range: 0.1mm-1mm, speed: 600m/min, tensile force range: 0.5N-1.5N, max. spool weight: 80kg, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 2200kg. Documentation available. An on-site inspection is possible. Predoyxq Upepfx Ahcsa

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Pedpfx Aheuhmacjcora Temperature controller adjustable up to 1100°C +temperature controller in the electrical box